Issue No. 8: Selection and installation of seat covers for Lada Granta

Mounting features

To fasten eco-leather car covers, cord, Velcro, hooks, elastic, various latches, etc. are usually used. When attaching a cover, you need to know the following:

• In the process of putting the product on the seat, fasteners made of elastic bands with hooks can be pushed under the plastic decorative parts located on the side, using a thin wooden strip like a ruler for further threading them below.
• It is important to know that the fastener must be made exactly at the location of the fastener, therefore, when putting on the product, it is necessary to apply force to tighten it. The main thing is not to overdo it, otherwise you can damage the car cover.
• When you put the cover on the back, squeeze the side supports.
• Be sure to tuck the machined holes on the car cover under the plastic.
• The headrest cover is pulled on and secured with a tie near the riser.

Shape Features

When purchasing car covers and putting them on, it is necessary to take into account the following features of seat shapes, which are determined by:

• Body type. For example, when sewing products for a sedan and a hatchback, different patterns are used. You can still somehow put covers from a “foreign” body on the front seats, but for the rear ones you will have to make cuts, otherwise the car covers won’t fit.
• The passenger and driver's seats are similar, but do not confuse the covers, the shapes of which are slightly different. They are distinguished by their tear seams; when putting them on, they must be on the door side, otherwise problems with the airbags may arise. That is why a special “AIRBAG” label is sewn into the seam side.

Some useful tips

Sometimes it happens that the air conditioner does not work well in a Kalina station wagon, sedan or hatchback. At the same time, you should choose seat covers that are very, very “breathable”, pleasant to the touch, and always avoid fur. This will keep you and your passengers relatively comfortable. This problem will be especially relevant in the warm season.

Experienced people often express the opinion that covers from a foreign car are suitable for our Kalina. The option is acceptable, but not ideal. Not all covers for foreign cars are suitable for domestic cars. You can put them on the seats, but how well they fit is another matter.

Don't buy cases without pockets. Their presence will help not to “load” the door pockets and the glove compartment unnecessarily.

For a hatchback or station wagon model, the presence of side and lumbar supports is not necessary. Kalina in this version has a completely normal seat profile.

When choosing the appropriate option, pay attention not only to the texture and design of the “clothing” for your car.

It is very important that the covers are comfortable to put on the seats.

Make sure there is an edge, this will help keep the Kalina seat covers securely in place. Please note that the covers must include headrests and armrests.

The choice of seat covers is a matter of taste. Everyone, when planning to buy such a plan, is guided by their preferences and ideas about beauty. But, despite such a subjective factor as personal taste, it is necessary to take into account the practical side of this issue, which will help you choose not only beautiful, but also comfortable and high-quality covers for Lada Kalina.

Removing the seats

Sometimes you can hear that changing the car covers of some car models is possible without removing them. This opinion is refuted by the following arguments:

1. Before putting on the product, you will need to remove the plastic covers, which will be difficult to do in a salon.
2. In order to put on the eco-leather cover, you will have to constantly turn the seat.
3. At times there simply won’t be enough space to get the job done properly.

Therefore, in order to avoid the listed difficulties, it is recommended to put covers on previously removed seats, and it is advisable to have assistants.

Dismantling the seats can be divided into the following stages:

• you need to start from the front seats;
• move the chair all the way, unscrew the bolts on both sides;
• move the seat to the opposite side and repeat the steps;
• remove all the side trims from it, to do this, first pull out the plugs, then start unscrewing the bolts;
• start removing the cladding; to do this, press it out with a screwdriver.

How to dress correctly

The entire dressing process can be broken down as follows:

1. You need to start with the front seats.
2. Carry out dismantling.
3. Remove the headrest from the chair and cover it.
4. First, the seat is put on. It is necessary to carefully straighten the eco-leather, only then place the chair on the side and secure the fasteners. It is important to tighten this part of the chair very well, since this is where the bulk of the load falls. If the tension is weak, wrinkles and folds will form on the chair.
5. If the fastening is made from below, the upper part of the chair is put on like a sweater, but it is necessary to apply force, since the cut of the car cover is made exactly to size. Fasteners on the product made on the back of the seat are less preferred by drivers, as they do not look so elegant.
6. The bottom of the car cover is secured under the seat, and it must be pulled tight.
7. After the covers are put on, you need to install the covers on the previous areas and return the chair to its place.
8. Putting on the eco-leather car seat cover for the front and rear seats is identical.

Before installation, be sure to read the included instructions. This will help avoid mistakes and avoid over-tightening the product.

The factory upholstery of the seats inside the car is subject to wear and tear. Eco-leather car covers will help protect the seats externally and significantly transform the car.

A big role here belongs to the correctness of putting on the cover. If you approach this work thoughtfully, it will take a little time, but the result will please you and your loved ones.

Publication date: February 27, 2022. Category: Automotive equipment.

Even after a short period of use of a new car, the standard seat upholstery (especially light colors) loses its neat and attractive appearance. Dust, moisture, food and drinks will certainly leave their “traces” on it, which will then be quite difficult to remove even in specialized services that deal with professional dry cleaning of car interiors. Covers, which are best purchased immediately after purchasing a car, will not only reliably protect the seats from all these troubles, but will also give the vehicle interior an elegant look. How to put covers on car seats: videos, photos and recommendations for installing them are presented in this article.

About the material of car seat covers

Cases made of artificial leather . If the leatherette is of high quality, then products made from it will be durable, reliable and practical (it is easy to wash and clean, breathable). Such cases can be a good alternative to genuine leather.

to have genuine leather cases . Leather products are highly wear-resistant, elastic, and the texture of the material is pleasant to the touch. This is the best choice, and the only thing that can be off-putting is the high cost.

Velor covers have a low cost, an original design (can be of different colors), good durability and do not require maintenance. This material takes on a streamlined shape and fits tightly onto the seats. Covers made of 100% velor are the most practical option.

If the covers contain synthetic polyester , keep in mind that this dense material does not allow air to pass through well, causing the skin to sweat.

Covers made of plush, tapestry. Inexpensive materials that absorb moisture well and are easy to wash. The main disadvantage is rapid wear.

Jacquard covers . This fabric consists of a complex weave of chemical and natural fibers. Durable and well breathable. Disadvantage: high price.

Fur covers can protect seats from wear, as well as keep you warm in winter or prevent you from sweating in summer. With such covers, the car interior becomes more prestigious. Fur covers are universal. When purchasing, special attention should be paid to the quality of the fur.

Eco-leather covers are artificial leather without PVC. Modern material that “breathes” well, at the same time does not allow water to pass through. This material does not “melt” or smell in the heat, and does not crack in the cold. Eco-leather is pleasant to the touch and durable.

Very often the material is combined, for example, leatherette is used along the edges of the covers, and the central insert is made of velor.

Where can I buy?

Covers for different LADA models from the manufacturer are presented in our online store:

We invite you to take part in the survey and determine which covers are best suited for modern cars Lada Granta (sedan and liftback), Lada Kalina 2nd and 1st generation, Lada Priora or Lada Vesta. Case reviews will be especially helpful.

Source

Design features and dimensions of universal cases

Almost all models of modern protective devices worn on car seats (both front and rear) are made using the so-called separate technology. A standard kit usually consists of 11 parts:

• 2 – for the lower parts of the front seats;
• 2 – for the backs of the front seats;
• 1 – for the lower part of the rear seat;
• 1 – for the back of the rear seat;
• 5 – for head restraints.

The best (but also the most expensive) option is to purchase covers made specifically for a specific car model. Then you can be sure that they will fit the seats exactly and there will be no problems with their installation.

Universal car covers (the most popular option) are produced mainly in two standard sizes: S - for small cars (for example, Opel Astra, Volkswagen Golf and the like); M is a standard size suitable for most car seats.

The responsible manufacturer indicates in the instructions an approximate list of car models for which the products it produces are suitable. And an experienced sales consultant will tell you which set of car covers is best for you to purchase.

Car compatibility

Approximate list of compatibility of covers size S*

Methods for installing car covers

Some automobile “gurus” claim that it is possible to properly put covers on car seats only after they have been dismantled (they believe that this achieves the effect of completely reupholstering the seat upholstery). Let's not say that this is not the case. Moreover, dismantling, for example, the front seats does not take much time: it is enough to unscrew only four bolts (for each seat). If you remove the seats from the car, the process of installing the covers is greatly simplified:

• There is no need to put your hands under the front seat and feel for something to hook the mounting hooks onto.
• The covers are tightened more efficiently (they fit more tightly to the surface of the seats).
• You can quite simply dismantle the side plastic covers (if they are present and interfere with the installation of the covers).

On a note! If your car is equipped with side airbags or electric front seat adjustment (forward/backward and backrest tilt), then remove the terminals from the battery before dismantling. Then disconnect all electrical wires. And only then remove the seats from the car.

However, as practice shows, most cars can be fitted with seat covers without having to dismantle them. The main thing is to follow the manufacturer’s instructions (if available), carefully read our recommendations and familiarize yourself with the materials: “how to put covers on car seats video,” a selection of which is presented at the end of the article.

Why are covers needed?

Not all motorists believe that seat covers are part of history, a relic of the past. But everything is a little different, because if a driver buys old covers for his new car, then it will, accordingly, look about the same. By purchasing a new accessory, you can improve the interior of your car, making it more modern. You can decide whether covers are needed only after thoroughly familiarizing yourself with this product.

Subwoofer installation

You can find more detailed information about this here. You may also be interested in our article on soundproofing a car floor.

A car cover is a special “clothing” that protects the factory seat upholstery from mechanical damage and dirt. It also gives the car's interior a new look.

What are car seat covers for?

There are several types of seat covers:

• model (produced for a specific car model);
• T-shirts (designed to protect not the entire surface of the seat, but only its upper part);
• universal (such accessories are suitable for many models, but because of this they do not fit tightly enough on the seats).

These species differ not only in appearance. The main difference also lies in the cost of the products. Model cases are considered the most expensive.

Bottom of front seats

First we put on the lower part of the front seat cover. How to wear:

• Carefully lay out the element on the seat, straighten it into the gap between the seat and the back and forcefully pull it down.

• Next, we put fastening hooks on the elastic bands sewn around the perimeter of the lower part (they are included in the delivery kit). We put our hand under the seat (if we decided to install the covers without dismantling the seats). We find the technological elements of the car to securely hook all the hooks around the perimeter of the lower part.

Attention! Be careful and careful! Do not attach hook elements to electrical wires or other electrical wiring elements.

• After all the elastic bands are secured with hooks, we smooth out the installed part of the cover again and, if necessary, tighten it down in the necessary (or bristling) places. If in some places the cover is not secured tightly enough, put your hand under the seat again and rearrange the fastening hooks so as to increase the tension of the included rubber bands.

• Next, carefully cut a hole for the backrest tilt adjustment knob (if your car is not equipped with an electric drive) and place the edges of the fabric under the plastic plug.

After you put on the lower part, you can start arranging the back.

Adjusting Lada Granta seats

Adjustment is carried out in the same way as in all other machines. Just remember that Lada Granta Sport models are not equipped with height adjustment.

Lada Granta Liftback allows you to adjust the chair vertically and horizontally. To sit comfortably in the car, pull the lever under the seat up. Move away from the steering wheel as much as required, or vice versa, move towards it and release the lever.

Vertical adjustment will be required if the owner is short. On the left side of the front seat there is a handle that must be turned to raise or lower the seat.

The design does not provide for adjustment of the passenger rear sofa on the Grant. But the seats can be folded down to transport large cargo in the trunk. The backrest of the rear seat folds by pressing the side latches.

Front seat backs

Regardless of the design features of the front seats (and the make of the car), covers on the backs of the front row seats can be easily installed without removing the seats. How to wear it correctly:

• First, remove the headrest. Pull the cover over the back of the seat. Don't worry about the so-called "drum" on the front side. The fact is that the material of the cover does not follow the geometry of the seat back. Everything will be fixed later.
• We tighten the lower “tongue” so that the cover sits on the back “like a glove” (that is, the geometry of the seats and the elements of lateral support are fully outlined). Since the back of the backrest covers is made of a thinner, well-stretchable material, this will not be difficult to do.

On a note! Don’t be afraid to apply force when pulling - it’s almost impossible to tear the cover with your hands.

• Having achieved complete adherence of the cover to the back of the seat, we drag the “tongue” into the gap between the seat and the back.

• We fasten it with rubber bands and hooks to the bottom (again, by the technological holes or metal elements of the chair).

Selection principles

It's worth noting: there are several of them. And each individually does not work effectively. To create a truly impressive image of your car, you need to follow all these rules.

So, useful tips for choosing seat covers for Kalina:

1. Before purchasing, think about how the overall interior of your car looks. And be sure to try to ensure that the interior design harmonizes well with the color and texture of the covers. Ideally, the covers should become the “highlight” of the entire car decoration.
2. The material from which the covers are made plays an important role in the design. Its choice requires special attention: both in appearance and in quality characteristics.

If you dream of making your Kalina a real “lady” and a representative of high society, you should buy high-quality leather cases.

But there are two nuances here. Firstly, the step of buying leather will seriously hit your pocket. Secondly, many simply will not understand you, given that leather cases are hardly compatible with Kalina and its general concept.

If the opinion of the company is important to you, and even if you consider buying leather cases to be an expensive pleasure while reducing the family budget, you should abandon this idea. But what then if you still want to decorate your car with interior decor?

In this case, you can simply opt for covers made from high-quality, presentable materials. For example, from velvet or flock. Or even eco-leather (it won’t be as expensive as genuine leather cases).

Moreover, if you still choose an interesting and even shocking design, the goal of creating the effect of a “rich” car will be achieved. For example, for the Lada Kalina 2 car, as a good modernized version, such a solution will be especially successful.

Treat your car with some really good “clothes”. That is, not only beautiful and successful in terms of style, but also high quality in terms of durability and wear resistance. Yes, these are the indicators that need to be taken into account when choosing car covers.

You also need to take into account ease of maintenance and ventilation properties. This will allow you to save a lot on dry cleaning in the future and ride comfortably, sitting on so-called breathable covers that are pleasant to the body.

It is better to choose covers from materials such as Alcantara, vinyl, velvet. You can use covers made from other fabrics, but in this case you should not settle for too cheap options.

For the Lada Kalina 2 model, we can safely recommend combined models. For example, when there are eco-leather inserts, different types of materials are successfully combined, it looks respectable and rich. If you have a car with heated seats, make sure the cover material you choose isn't too hot.

Bottom of rear seats

In some cars, the bottom of the rear seats can be put into covers without dismantling (for example, in the Renault Logan, it folds forward on mounting hinges), but for some cars it will still have to be dismantled. It's not that difficult to do.

The cover is put on similarly to the lower part of the front seat:

• First we stretch it over the entire lower part of the seat.
• Then we attach the cover using elastic bands and hooks.
• If there are no metal technological elements on the inside of the rear seat that could be hooked onto, then we tie the elastic bands opposite each other using a cord.

Attention! Do not hook the hooks onto the inner polypropylene filling. Such a mount will eventually fall off over time. And the cover will fit “like a saddle on a cow.”

Video of installation of eco-leather covers with hemming

Usually a picture immediately appears in your head, a general idea of ​​the color scheme and many other nuances that you want to see in your car, then the torn between different options begins. As a rule, the first one is the most correct, but I looked at different options, rejected them and returned to white. More precisely to beige.

Next was another poop - where to buy. I solved this problem with all my might, and the problem of buying more (in this case quality) for little money always motivates me. I bought it and didn’t regret it.

The most interesting statement, or question, or statement, sometimes a verdict, that I constantly hear is - light is impractical, it will quickly get dirty. Moreover, all this is said with such an authoritative look and such an intelligent face that I begin to swim in orgasm. Honestly, I don’t deny myself the opportunity to make fun. Why not? Or a man just discovered America before my eyes!

The dumbest question you can ask such a person is why? That is, it turns out that I was smart enough to collect everything that I collected, but when choosing a color, I really screwed up.

- They'll fuck it up, you'll see! The seat will be black! This is all a passed stage!

There are many options, but I continue to get used to the character and act out the despair in my eyes that threatens to end in a nervous breakdown. This used to make me angry too, but now I’ve changed my attitude and enjoy the genius of the dirty guy.

A person needs to be given the opportunity to speak out, you need to listen carefully to everyone, no matter what, perhaps there is something rational in his words that you really missed. If I don’t see this, then the following happens, the text is something like this:

- I don’t understand your logic. How can they get dirty?! -...

- It turns out, according to your logic, that dark skin is most practical, since dirt is not visible on it and does not need to be looked after like white skin!

- Well, it turns out it’s more correct to be a black man! And you don’t need to swim and you can’t see the dirt!

There is a type of people (of both sexes) who are beautifully dressed and look well-groomed and everything seems fine, but they have dirt under their toenails. It is almost impossible to see it; of course, a person is not always barefoot. Such people put me in an incomprehensible state. These are your legs, motherfucker! You can’t unfasten them, say, during mating games. Or maybe I don’t know something in this life?

My cases are almost a year old. These are eco-leather covers. Whether it's good or bad doesn't matter. In any case, eco-leather is by default an achievement of science. In some ways it is worse than natural, in some ways it is not inferior, in others it is superior. But in one thing they are equal - they require care. Everything requires care and color no longer plays any role. When you're a pig, skin color doesn't matter.

The rest of the transformation of the car itself began with the beige covers. I allowed myself a little variety only in combination with black. A red car paired with white and black looks right. Actually, this is the concept.

The interior of my car is wrapped in covers. I didn’t spend a single extra penny on installation, although such a service is available. I also did not see the point and will not see the point in reupholstering the seats, especially in replacing the seats with others. But there are some improvements. More precisely, it was not a matter of simply putting on the covers. This happened, as always, by chance and naturally, and judge for yourself what happened.

Yes! I almost forgot, I bought eco-leather for all my alterations, modifications, and modifications from the same company where I bought the covers. They have only two points in Moscow, not counting the installation site, but they don’t sell material there, only ready-made covers. And in other cities, of course, I don’t know, but I don’t think there will be any difficulty in purchasing similar material. You just have to look.

Rear seat backs

The back of the rear seats in modern cars either folds forward or is attached quite simply (using special latches).

Typically, the back cover has three sewn-in vertical zippers. This is necessary in order to tilt forward only one part of the backrest (if this is provided for by the design). If the back is “monolithic”, then these fasteners are not used.

For seats consisting of two reclining parts:

• first we carry out preliminary fastening (with zippers fastened) on both parts folded forward using elastic bands and hooks (similar to the lower part);

• then unfasten the zipper opposite the line between the halves of the chair;
• Using additional elastic bands, we fix the edges at the junction of the parts of the backrest;
• Place both halves of the backrest in a vertical position and fasten the zipper.

Now, even with the cover on, both parts of the rear backrest can be folded forward independently of each other. To do this, you just need to unzip the zipper first.

Covers for front seats

For those who do not want to spend a lot of time installing protective devices for car seats, seat covers can be a good alternative to full-size products.

The undoubted advantage of such products is their ease of installation, which usually takes only a few minutes and does not require explanations or recommendations. The downside (and a very significant one) is that numerous parts of the seats remain unprotected. As a result, they can not only get dirty, but also fade on sunny days.

December 18, 2016

This review with video instructions will tell you how to put seat covers on correctly and quickly.

In the video, an Avtoprofi expert will show and teach how to correctly and quickly put on seat covers with a separate fitting pattern on car seats.

For those in a hurry, here are brief step-by-step instructions for installing covers on the rear and front rows. But we recommend watching the video anyway – it’s interesting.

We analyze the sewing of car covers in the form of seat covers

Car seat covers in the form of capes look no worse than regular covers and also protect well from dirt, abrasions and water, are easily removed if necessary and can be easily machine washed. Such covers are suitable for lovers of outdoor recreation. In this case, you can choose any fabric to your taste and color. Capes do not take much time to make and cut, and if necessary, they can be easily replaced with new ones. Below is a photo of the finished work.

Take a piece of fabric equal in width and length to the car seat. We retreat 25 centimeters from the edge of the fabric and make a mark, measuring the middle along the width. Then we take measurements of the headrest of your car - the circumference and divide this number in half. Using the mark made, we mark the calculated number on both sides of it. Draw a line and make a cut along it. We make edging along the cut and along the entire perimeter of the fabric. We put the resulting cape on the chair. Also, for convenience, you can sew a pocket on the back of the case, in which you can put various small things you need on a trip. Similar covers can be made for rear car seats by first taking the dimensions. At the end of the article you can watch a video on sewing covers.

Who would have thought that crocheted covers would gain great popularity.

The work is very labor-intensive and will take a lot of time, but you will be the owner of completely unique car covers. First, you need to decide on the choice of yarn, since the item is not made for one season, it is worth comparing all the pros and cons. The yarn should be strong, moderately soft and not scratchy. Macrame yarn is ideal for these purposes. We do all the necessary calculations for the car seat. As for crocheting itself, there’s a lot of skill here. You can crochet flowers or just diamonds, squares, or make a grid. The choice of patterns that can be crocheted is huge. And in this case, everyone chooses what he likes best.

Installing covers on the front seats

It is better to remove the seats - this way the tension will be as tight as possible and without wrinkles.

If the covers have a separate putting on pattern, then first put the cover on the chair cushion.

• Put on the cover;
• Tuck the tongue between the pillow and the backrest;
• Spread the material around the entire perimeter.
• We first fix it with long thin elastic bands - we put them under the seat, stretch them and tie them together.
• We finally fix the lower part of the cover using installation rubber bands with hooks at the bottom of the seat.

car owners were advised to purchase a strong nylon cord from a fishing store and sew it to the covers instead of ribbons. With the Avtoprofi models, such efforts are not required: all models are pre-installed with wide stitched elastic bands with stainless steel hooks.

• The tongue of the upper half of the cover also fits between the pillow and the back.
• Then the fabric of the cover should be pulled down with a slight movement and smoothed so as to pull the material down as much as possible, towards the tongue.
• The cover is pulled over a tongue on the back of the chair, like leather on a drum.
• With maximum tightening, the front part of the cover is literally imprinted into the shape of the chair.
• The tongue is inserted under the back of the cover and secured with Velcro.

A little trick: holes for the headrest rods in the cover can be made using a screwdriver or... A regular cigarette!

Sequence of operations

It is generally accepted that in order to properly put covers on car seats, you need to start with the front seats. It is not necessary to remove them from their places. You can do the job without dismantling.

The procedure is as follows:

• the headrests are removed from both seats;
• the corresponding part from the kit is put on the vertical part of the chair , and the fixing rubber bands or “tongue” are passed into the slot under the “back” to secure it under the bottom of the chair; the tension should be sufficient so that the fabric straightens well;
• Now you can put on the lower part of the cover and secure it with hooks under the bottom, also ensuring tension;
• after that, we put the kit element on the headrest and tie it with braid to secure it;
• if the covers do not have holes for the headrest guides, then you can independently make cross cuts in the appropriate places with a construction knife , and then insert the headrest into place.

The same steps must be done with the second front seat.

Covers for the back row are usually put on from the bottom. Some people find it more convenient to dismantle the backrest to make working more convenient. Having packed the lower part, we fix it under the bottom with hooks or ties. Next, we put the upper part on the back, and attach the hooks at the back.

If the sofa has a division, then it is necessary to cover each part of the back one by one. We suggest watching a detailed video with step-by-step instructions.

Installing car covers on the rear row

Now you need to install the covers on the back row of the car. We remove the pillows and the backrest. Leave the back in place.

The donning pattern here is exactly the same as with the first row:

• On the back of the rear seat, you need to remove the seat belts, if present, and then fold the backrest.
• The cover consists of two halves and is positioned so that its zippers coincide with the fault lines of the back.
• Once put on, the zippers are closed and the two separate halves of the cover become one.

Preparatory work

We unpack the purchased kit with covers and check the contents. We recommend laying out the coating on a flat surface for further quick access to the desired item. It is also worth checking the fastening elements and, if necessary, untie the laces and align the Velcro.

In addition, you must first thoroughly clean the interior of the car, paying special attention to the factory upholstery. There should be no crumbs or foreign objects left on it.

It is best to work with an assistant, as this will speed up the process of installing covers on Chevrolet, Daf and other cars several times. An extra pair of hands will be especially useful when installing covers on the rear seats of a car.

Additional tips:

• The tighter the material adheres to the case, the longer they will last. Therefore, it is better to take the time to remove the seats before installation.
• If the seats have built-in side airbags, then choose the appropriate cover models.
• The unraveling seam must be placed on the side where the Airbag pillow is located.
• Remove the seats. At least the front row. The quality of planting will be higher, and it will take less time. Removing the seats is quite simple: turn off the electrics and unscrew the mounting bolts of the slide.
• Be sure to turn off the ignition before removing the seats and rear sofa!
• There is no need to remove the plastic on the sides of the seats. In principle, it is not suitable for removal and returning it to its place can be problematic. To better push the cover fabric between the seat and the plastic, it is good to use a smooth metal plate (about the same as what doctors use to examine the throat).
• Squeeze the seat upholstery while pulling the cover. This will make it easier to install the covers without damaging the fabric around the seams.
• It’s unlikely that anyone is going to install seat covers in the cold, but just in case, it’s worth pointing out that it’s best to install protective coverings at above-zero temperatures. Especially if the covers are made of natural or artificial leather (eco leather). These materials “tan” and lose elasticity at low temperatures, so if you don’t have a warm garage, then summer is the best season to install covers.

Rules for choosing covers for Kalina

In addition to the material from which the car seat covers are made, the owner should take into account a number of other factors before purchasing a set, otherwise they will not be able to enjoy using it.

Leather upholstery

1. Viburnum covers must have all openings necessary for installation, including headrests and armrests.
2. Regardless of the base material, it is desirable that the end parts subject to abrasion are made of leather or leather substitute.
3. Presence of edges. The edges of the covers not only provide a secure position on the chair, but can also stand out in a different color combination.
4. The presence of lateral and lumbar support is not necessary, since both the Kalina hatchback and the Kalina station wagon have a normal seat profile. However, taking into account the individual characteristics of the driver, these characteristics can be slightly changed.
5. The presence of additional pockets on the covers will relieve the load on the side door pockets or the glove compartment, which is especially important if there are often children in the car, as well as during long journeys.

Return to contents