When operating a vehicle, situations arise when it is necessary to transport large items and some cargo. A car trailer is used for transportation. However, to make towing possible, a trailer hitch must be installed on the vehicle. To install a towbar on the VAZ 2114, standard places are provided for attaching a towing hitch, which allows motorists to equip their vehicles with this part.
Types and criteria for choosing a traction coupling device
The choice of towbar model largely depends on the operating conditions of the given traction element. TSUs are divided into:
- Removable.
Fairly easy to install. Thanks to this, they are very popular among owners of VAZ 2108, 2109, 2114 and 2115 models. They are mounted with 2 or 4 bolts. The process of installing or dismantling the product takes 20-30 minutes.
- Fixed.
They are a massive non-demountable structure. They are attached to the car by welding or “fitting” onto massive bolts. Devices of this type allow you to tow other cars and trailers with increased load capacity.
- Quick release.
Collapsible structures, often equipped with a mechanism that allows the towbar frame to be folded. The coupling ball is dismantled. Devices of this type are suitable for transporting low-capacity trailers.
Also, the tow bar for the VAZ 2114 has the following varieties:
- With low load capacity. The total weight of the loaded trailer must not exceed the load rating of 1500 kg.
- With increased load capacity. The curb weight of the trailer varies from 3000 to 3500 kilograms. To be able to transport such a trailer, you must have a category E driver's license.
When installing a towbar on a VAZ 2115, VAZ 2114, VAZ 2109 and VAZ 2108, the corresponding trailer hitch is used. Experienced motorists recommend purchasing traction coupling devices manufactured by "Trailer", "Leader-Plus". To determine which towbar to install on the car, you will need to study the markings. It is indicated on the body of the part.
As for the selection criteria, it is worth paying attention to the following factors:
- Manufacturing company.
Installation process
The VAZ has special places for installing trailer hitches. You will be able to buy either a model designed for 21099 or another trailer hitch that is most suitable for your use.
You will need:
- Remove the rear bumper with amplifier.
- Place the device on the rear side member.
- Make outlines of the future location of the product with a pencil. The distance is measured from the vertical wall of the side fasteners to the hole in the attached part.
- Find (make) on model 2108 or 21099 4 holes in the niche for the spare wheel. To transport not very heavy loads, some drivers secure the trailer hitch with only 2 bolts in the spare wheel well.
- Make 1 additional fastening inside the trunk of the car on each side so that they match the size of the metal hose with wiring. The distance between the holes must match the size of the device. Secure the holes with bolts.
- Press the trailer hitch against the vehicle body. To do this, use the fasteners (washers, nuts, bolts) that are included in the package.
- Insert the corrugation through the holes in the product.
- Place the wiring in the corrugation that will go to the outlet.
- Seal the remaining holes with sealant.
Installing a tow hitch on a VAZ 2109
As for electrics, in the process of installing it yourself in a VAZ you should:
- connect the socket to the contacts on the rear lights of the car;
- assemble it according to the pinout;
- Be sure to insulate the wires when connecting to prevent moisture from entering. It is also recommended to use soldering for better contact.
After finishing work, treat metal surfaces with bitumen mastic or nigrol, which will help protect the products from corrosion.
What you need to prepare before installation
Before the installation process of the towbar, you will need to prepare the vehicle, as well as the tools necessary for installation. The vehicle is driven to an overpass or inspection hole, the car is de-energized, and, if necessary, the bumper is dismantled.
Among the tools for installation, you need to prepare a set of keys, an electric drill with a cutter, as well as a tow bar, wires and a socket.
Installation process
Installation of a towbar on a VAZ 2114 is carried out according to the following algorithm:
- The cross beam of the trailer hitch is attached to the side members. The rear holes are drilled using a drill with a cutter.
- Afterwards, you need to remove the soundproofing coating from the trunk side and place the plates in the rectangular holes of the side members. Fasteners are already welded to them. The holes are expanded using a drill.
- Next, a transverse beam is applied to the side members and secured with bolts. The nuts will need to be tightened, but do not tighten them.
- The final stages of installation will be the installation of a longitudinal metal part with a towbar. To do this, insert fasteners into the holes in the spare tire niche, attach the element to be installed to them, and lightly tighten the nuts. Two metal structures of the towbar are fastened together using 2 or 4 bolts, the hook is set according to the symmetry of the machine, the tow ball is installed, and the fasteners are completely tightened.
When installing a towbar with your own hands on VAZ 21099, 2114, 2109, 2115, 2108 cars, you need the instructions that are included with the trailer hitch. It is recommended that two people work together.
Rules for choosing a tow bar
You can choose the right tow hitch based on the make, model, and year of manufacture of your vehicle. Experts advise purchasing exclusively certified structures. Such devices are most often used by hunters, summer residents, motor tourists and fishermen. The towbar is attached to the frame or body of a passenger vehicle, which provides mechanical and electrical connections between the vehicle and the trailer.
The towbar kit includes instructions for its installation. It is required to mount it to the body through brackets, to its power elements and to the floor in the trunk. Installing a tow bar on a VAZ 2114 is quite simple due to the presence of standard mounting points. Similar points are provided in the VAZ 2108-2115 and Chevrolet Niva models.
When installing the towbar on the 2108, you will need to remove the rear bumper. In some VAZ models, the bumper is cut according to the template that comes with the towbar. The mounting holes must be carefully treated with an anti-corrosion agent. The TSU has 2 elements:
- hook;
- cross beam.
The first element is fixed on the spare wheel niche, and the 2nd element is fixed between the side members at the rear. Both parts are held together with 4 bolts. There are mounting points on the body that only need to be slightly expanded to create a rigid structure.
Connecting the socket
After the tow bar has been installed, proceed to connecting the socket with wires. They provide an electrical connection to the vehicle's towbar. The pinout looks like this:
- Yellow (Left turn signal).
- Free.
- Black (Mass).
- White (Right turn signal).
- Free.
- Red (Stop light).
- Blue (Parking lights).
After making the connection, the wires are pulled into the holes in the niche for the spare wheel. The socket is powered from the car's rear headlight connectors.
Installation process
The VAZ has special places for installing trailer hitches. You will be able to buy either a model designed for 21099 or another trailer hitch that is most suitable for your use.
You will need:
- Remove the rear bumper with amplifier.
- Place the device on the rear side member.
- Make outlines of the future location of the product with a pencil. The distance is measured from the vertical wall of the side fasteners to the hole in the attached part.
- Find (make) on model 2108 or 21099 4 holes in the niche for the spare wheel. To transport not very heavy loads, some drivers secure the trailer hitch with only 2 bolts in the spare wheel well.
- Make 1 additional fastening inside the trunk of the car on each side so that they match the size of the metal hose with wiring. The distance between the holes must match the size of the device. Secure the holes with bolts.
- Press the trailer hitch against the vehicle body. To do this, use the fasteners (washers, nuts, bolts) that are included in the package.
- Insert the corrugation through the holes in the product.
- Place the wiring in the corrugation that will go to the outlet.
- Seal the remaining holes with sealant.
Installing a tow hitch on a VAZ 2109
As for electrics, in the process of installing it yourself in a VAZ you should:
- connect the socket to the contacts on the rear lights of the car;
- assemble it according to the pinout;
- Be sure to insulate the wires when connecting to prevent moisture from entering. It is also recommended to use soldering for better contact.
After finishing work, treat metal surfaces with bitumen mastic or nigrol, which will help protect the products from corrosion.
Recommendations for use
When operating a Lada car with a towbar, you must follow some rules for operating this part:
- After each trip, the traction element is treated with special anti-corrosion solutions, dirt and moisture are removed from it.
- The coupling ball, when not in use, is covered with protective lubricant and a special cap.
- When transporting a fully loaded trailer hitch, the vehicle speed should not exceed 90 kilometers per hour.
- Transportation of extra-heavy, large-sized trailers is carried out using a towbar with increased load capacity.
- After installing the trailer hitch, the part is registered with the traffic police.
The towbar expands the vehicle's capabilities. A machine equipped with a trailer hitch is capable of towing trailers or other vehicles. However, you should select towbars that are suitable for your specific vehicle model.
Conclusion
There is no need to register a towbar with the traffic police if:
The towbar can be installed not only by an authorized dealer. This can be done by any other organization that has a certificate of compliance of the services provided for installing a tow bar with technical regulations and GOST, while the car will remain under warranty from the official dealer.
About tow bar for LADA
: installation of a tow bar is provided by the factory for all modern LADA models (Vesta, XRAY, Granta, Largus, Niva). Before purchasing a towbar, check whether it has a certificate. We recommend installing an original tow bar.
Where can I buy
: original and non-original towbars are presented in our online store (Towbars category).
Key words: universal article
Source
A few secrets on how to install a towbar on a VAZ 2114
Some motorists regularly use a trailer. In order to couple a trailer and a car such as a VAZ 2114, a special device is required. It's called a tow bar. This device allows motorists to transport any cargo on pre-attached trailers. If a car enthusiast does not know how to install a towbar on a VAZ 2114, then he should act according to the plan given below in the text.
The most popular types of towbars:
- flanged;
- welded;
- removable.
Each of the listed types of towbars has its own characteristics. Welded towbars are highly reliable, and removable towbars can be dismantled. Flange towbars must be installed on a special platform.
Towbar registration
AVTOVAZ engineers have provided for the use of VAZ 2114 vehicles with a trailer, so a car enthusiast can install this element without registering with the traffic police. For the purchased tow bar, the seller is required to provide a passport and certificate .
- If a tow bar of an unspecified type is installed on your vehicle, the procedure is as follows:
- Visit the local traffic police department to establish the possibility of installing a towbar in principle;
- If the decision is positive, receive a certificate with the result of the examination carried out on the basis of an accredited laboratory;
- Pass a technical inspection of the car;
- Re-issue the vehicle vehicle (a note about the installation of the vehicle vehicle must be entered in the “special notes” column).
This certificate must be presented along with your license and registration certificate.
How to install a tow bar on a VAZ 2114
The first thing you should pay attention to before installing towbars is the towbar. It must be of high quality and well cooked. It will be better if the towbar is made of thick enough metal.
The dimensions of the towbar (as well as the holes) must be consistent. Under no circumstances should it be necessary to bend any parts or drill holes in order to couple the vehicle and trailer.
It is believed that before installing the towbar, you should check the quality of the paint. It must reliably protect the device from any environmental influences. This also applies to rust.
You should also prepare a complete set of necessary tools. This may require keys, as well as an electric drill with a cutter.
Installing a tow bar on a VAZ 2114
- First you need to install the cross beam. To expand the side members on the rear, use a drill with a cutter. After this, you should raise the sound insulation, which is located in the trunk area.
- The next step is to insert the plate into the holes of the side members located at the rear. If there is a need to expand the hole, this can be done using the same electric drill with a cutter. It is best to carry out such work together.
- The next step requires attaching the cross beam to the side members. After this, it must be secured with bolts as soon as possible. Next, you need to fasten the plates with already welded nuts directly onto the bolts.
- Then you need to remove the muffler. You can also simply disconnect it from the 2 rubber bands located at the back. This is necessary so that the muffler falls down under its own weight. The nuts can be tightened, but not tightened.
- Now it’s the turn to secure the longitudinal metal part with the towbar. Another stage of work is installing bolts. They should be installed in the holes that can be found in the spare tire. When this is finished, you need to attach the metal part, and then lightly tighten the nuts.
- It is necessary to connect 2 metal parts using 4 bolts. In order to do this as quickly as possible, you need to tighten the nuts not all the way. After baiting all the elements, you need to align the hook along the axis of symmetry of the machine. The fasteners should also be firmly secured.
When this work is completed, you should connect the towbar to the car's wiring. These works should be performed strictly according to the instructions supplied with the device. In any case, the wire must be cut into several parts. They should be the same. When the wire parts are ready, you should strip the ends and screw them to the socket. The back of the socket should be sealed with sealant. This is needed for insulation.
The socket itself must be secured with self-tapping screws on the bracket. Instead of self-tapping screws, you can use bolts. After this, the socket should be connected to the wires of the harness. Wires should also be placed inside the trunk. This can be done through several holes that are located in the spare tire niche.
From the luggage compartment side, the wires should be tightened into knots so that they do not “come out”. Otherwise, all the work will be done in vain. If the wires are located at the bottom, they can be secured using electrical tape. Everyone can cope with this task.
Step-by-step installation instructions
The towbar on the VAZ 2114 must be well welded and made of thick metal. The geometric dimensions and holes must be precisely maintained so that there is no need to drill and bend parts during installation.
Experts recommend checking the quality of paint on the product, which protects it from rust and maintains an attractive appearance. Self-installation of a towbar on a VAZ is carried out using the following tools:
- set of keys;
- electric drill with cutter.
Pre-install the cross beam. To widen the holes of the side members at the rear, use a drill with a cutter. Then you need to raise the sound insulation (from the trunk side) by inserting the plates into the rectangular holes in the rear side members. Nuts are welded to the last elements. The holes are expanded if necessary, similar to a drill with a cutter. Such tuning is done by two people.
In the 2nd stage, one person places a cross beam on the side members and secures it with bolts. An assistant inserts plates with welded nuts onto the bolts (from the trunk side). The muffler is removed or disconnected from the 2 rear rubber bands so that it lowers under its own weight. The nuts need to be tightened, but not tightened.
At the 3rd stage, a longitudinal metal part with a tow bar is attached. An assistant needs to start installing bolts into the holes in the spare tire on top. Then apply the metal part and lightly tighten the nuts.
The next stage involves connecting 2 metal parts using 4 bolts. This process can be completed quickly by not fully tightening the nuts in the previous stages. Then, after all the parts are attached, the hook is aligned along the axis of symmetry of the car, and all fasteners are firmly tightened.
