Alarm system Tomahawk 434 mhz frequency: operating instructions, autostart

There are a huge number of car alarms on the market today. In the fight for the user's favor, they not only guarantee a high degree of resistance to hacking, but also offer many additional functions that make life much easier for the car enthusiast. According to the instructions, the Tomahawk 434 mhz frequency alarm system has many options:

anti-grabber and anti-scanner. The first one reliably protects the signal from hacking using a special encryption code, the second one protects it from interception using special devices;
possibility of feedback - the owner can always make diagnostics and find out about the state of the system;
many security zones, including doors, hood, luggage compartment, shock and tilt sensor, capable of recognizing the degree of threat;
silent arming, silent monitoring mode;
“panic”, scaring away intruders;
Anti-hijack option, which blocks the engine in case of theft;
Valet service mode, which turns off some of the security functions for repair work;
protection against false positives;
remote start of the power unit;
bypass the faulty zone;
safe driving mode with central locking locked when reaching a speed of 20-30 km/h.

We also have instructions for using Tomahawk 868 mhz frequency.

How to close and open a door

The security system includes two key fobs - a main one and a spare one. The first has an excellent communication range (up to 1200 meters) and an LCD display with icons and five buttons. Most teams are sent from there. In order to block the central locking system and arm the car, you need to press the key with the lock symbol. The doors are unlocked after pressing the button with the lock open.

A spare remote control is provided in case the main one is lost. The key differences are the lack of a screen and feedback. The pager sends commands at a distance of up to 30 meters. Opening and locking doors are done in the same way (keys with open/closed lock).

Advantages and disadvantages

The advantages of the Tomahawk 434 MHz alarm system:

reliable protection of the vehicle from electronic hacking and signal interception;
great functionality typical of full-fledged security systems;
the presence of a personal password that can be used to control the alarm in the event of loss or breakdown of the communicator.

The main disadvantage of this model is the possibility of false positives. But in practice, this is usually due to incorrect settings of parameters, including the shock sensor. To solve the problem, you will need to reduce the sensitivity of the device.

How to set up and program the key fob

When installing the Tomahawk 434 mhz frequency alarm system for the first time or purchasing new remote controls, you will need to bind it to a specific car. The setup is done like this.

The driver gets into the car and presses the Override service key seven times.
After turning on the ignition, the car emits seven sound and light signals, confirming the transition to the mode.
At the same time, press the first two buttons of the remote control (with the lock icon) until the sound signal sounds.
The system is capable of remembering up to 4 devices (the main thing is that the remote controls are compatible with the complex) and automatically exits the binding mode if the buttons are not pressed for 10 seconds.

Description and technical specifications

An overview of the main characteristics of the Tomahawk 434 MHz 15v model:

the model complies with climatic standards GOST 15150 and electromagnetic compatibility requirements GOST R50789-95;
the alarm system can operate without interruption during voltage surges in the vehicle’s electrical network in the range from 9 to 15 volts;
when the ignition system is turned off, the current consumption of the security system will be no more than 16 mA;
signal transmission between the transceiver and the control module is carried out via a radio channel with a frequency of 433.92 MHz;
the range of action of the system’s communicator (pager, remote control) when sending commands and receiving notifications is 1200 meters;
300 mA will be required to power additional channels to control auxiliary equipment;
The duration of the signal for controlling the central locking can be adjusted by the user and will be 0.8, 10 or 30 seconds.

Installation and use of Tomahawk 434 MHz Frequency is possible on any vehicle. The type of engine (gasoline or diesel) and transmission (automatic or manual) does not matter. The main thing is that the voltage in the vehicle’s electrical network is 12 Volts.

How to install a car alarm

Detailed information along with the connection diagram is provided in the instruction manual. You can download the instructions from the link. The following describes the general principles of operation:

Initially, the terminal is removed from the battery, the front panel is disassembled and the working surface is prepared;
the alarm system is assembled and tested for serviceability before installation;
The main processor is installed in the cabin. It is important to protect it from high temperatures and moisture for correct operation;
The antenna is installed at the highest point, but away from metal parts that interfere with radio signals. An LED is displayed on the windshield to indicate the system status;
The Override service key is mounted. Its location should be hidden from the eyes of an intruder, because the button allows you to turn off the alarm in an emergency;
an audible siren is installed (the best place is under the hood, away from sources of high temperatures), as well as door, trunk, and hood limit switches (in places inaccessible to moisture);
The connectors are connected, the operation of the system is tested directly on the car.

Find out how to disable the Tomahawk immobilizer.

Description of the key fob

Each tomahawk key fob has the same type of buttons and pictograms (icons on the LCD display).

Button meaning

The main and additional key fobs contain the following buttons with pictures:

KN 01 – closed lock icon;
KN 02 – icon in the form of a key;
KN 03 – badge with an open trunk lid;
KN 04 – icon in the form of a crossed out speaker;
KN 05 – icon of the letter F in a circle (only on the main keychain).

Button diagram and symbols

Meaning of pictograms

Pictograms (lighting icons on the alarm screen) notify the owner about the state of the car and the security system:

1. the car is set to the handbrake;
2. the system is armed;
3. quiet security mode;
4. door locking;
5. the locks are unlocked;
6. vibration mode of the key fob is turned on;
7. service mode is enabled;
8. charge level;
9. one of the doors is open;
10. the power unit is working;
11. trunk open;
12. temperature
13. time;
14. alarm clock is on;
15. timer is on;
16. repeating autorun;
17. power saving mode;
18. security object within the key fob’s coverage area;
19. two-way communication channel;
20. calling the car owner;
21. autostart at a given temperature;
22 – 25. triggering of shock sensors;
26. “siren” mode is turned on;
27. open hood indicator;
28. The machine's lighting devices are working.

Icon layout

Tomahawk 9010 Programming Table

Alarm system Tomahawk 434 mhz frequency: operating instructions

High-quality, problem-free operation of a car alarm is only possible with correct installation and proper use. All the necessary information is contained in the instructions for use, which can be read for free. The first part of the document will tell you about the technical characteristics of the system, reveal its functionality, teach you how to bind pagers, and configure functions through the programming menu. The second part is devoted to installation features and node connection diagrams.

Signaling benefits

Tomahawk tw 9030: instructions for use with pictures
Tomahawk is in great demand in our market. One of the reasons for which is a relay blocking the motor

This way the owner can turn off the engine if the car is stolen, which is undoubtedly very important

Another advantage of the security system is starting the engine with the security system turned on. This is very convenient in winter, and in places where the climate is especially harsh. You can also activate the air conditioning from the key fob.

Another advantage of the security system is the individual password that the owner receives when installing the alarm. It is not possible to fake it. In order to learn more about the functionality of the device, you need to read the operating instructions supplied with the system.

How to enable and configure autorun on Tomahawk 434 MHz?

According to the instructions, the alarm system has a remote start function for the power plant. The owner can start the car from auto start based on temperature, timer or after the desired period of time. All parameter settings are made through the programming menu. Before starting the engine, the following conditions must be met.

For cars with a manual transmission, the lever is moved to the neutral position (for automatic transmission - parking).
The parking brake lever is pulled all the way.
All doors, trunk, and hood must be closed.

The unit starts after a long press of the second button (with a key symbol) until a melodious squeak and a short click on the third key. Three signals from the machine will confirm the success of the command.

Functions

One of the main features of this alarm is thoughtful protection against hacking and interception of control commands by encrypting them. Thanks to a two-level shock sensor, this security system can warn of slight shocks or rocking of the car without triggering the alarm mode.

To control additional devices, 3 service channels are provided.

To protect against theft and burglary, it is possible to block the engine or interrupt its operation. There is a two-stage disarming function, implemented by entering a secret code. Another useful service is calling a key fob by pressing a button on the transceiver. If the trunk or hood is open, the 434МНz alarm will turn on the alarm mode and block the engine from starting.

Warm-up by time: hourly start

When parked for a long time, the periodic start option is useful (every 1, 2, 12 or 24 hours). Owners of the Tomahawk 434 mhz frequency system are interested in how to disable autostart. The user must press the first and second buttons simultaneously. After this, the remote control speaker will emit one signal, and the automatic start mode will be deactivated at specific intervals.

Find out why the Tomahawk alarm key fob does not work.

Key Features

An overview of the distinctive features and functions that are described in the Tomahawk 434 MHz Frequency alarm instructions:

Availability of anti-scanner and anti-grabber. These features help prevent signals transmitted between the transceiver and pager from being intercepted.
Application of an additional immobilizer. The presence of this device makes it possible to block the power unit when an unauthorized attempt is made to start it.
Two-stage disabling of the security mode. The user can configure the system so that the protection is deactivated first by a command from a pager, and then by a personal code. The password is entered by using the service mode entry button.
Audible and visual confirmation of the options being performed. All data is displayed on the main pager screen.
Possibility of connecting and using additional sensors.
Starting the engine automatically, without the presence of the car owner in the car. Using this option, the user can pre-start the power unit in order to start driving in an already warmed-up car.
Self-diagnosis of the system when arming and disabling security with automatic bypass of faulty zones. Information about problematic alarm elements is displayed on the communicator screen.
Possibility of using the key fob from the standard central locking to control the system.
Availability of “Anti-robbery” mode. With its help, the user can block the operation of the engine when forcefully seizing the vehicle. Activation of the option is possible using a special button or in automatic mode. In the latter case, to enable the mode, the system is guided by the readings of sensors installed on the pedal and handbrake.
Remote adjustment of the shock sensor sensitivity parameter. The user can only use warning or alarm protection zones.
Availability of screen backlight. This function simplifies the procedure for configuring system parameters at night.
Vibration mode. If necessary, the user can turn off the sound notification and enable vibration mode on the remote control. Using this function will save battery power in your communicator.
Availability of an option to block buttons on the remote control. This feature prevents you from accidentally pressing the keys on the device in your pocket.
Temperature control in the car interior. This option is possible due to the presence of a temperature sensor built into the control unit.
System trigger memory. If the alarm mode is activated in the absence of the car owner, data about this will be displayed on the pager screen.
Possibility of turning on protection on a car with a running power unit.
Monitoring the battery charge in the pager. Battery performance data is displayed on the remote control screen.

Alarm equipment Tomahawk 434 MHz Frequency

How to set the engine temperature to warm up: 1-2 Temp Start

The special temperature start function makes life much easier for the owner. You can leave the house in the cold season and get into an already warmed up car. The engine can start on its own when the temperature reaches -30, -20, -10 or -5 degrees. Activation is carried out by long clicking on the button with a closed lock and short pressing the key with an open lock. If you are wondering how to turn off automatic winding, then this procedure is carried out in reverse order.

Video about installing the power unit autostart timer on Tomahawk anti-theft systems

Taken by Olzhas Anuarbek.

Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question

Was this article helpful?

Thank you for your opinion!

The article was useful. Please share the information with your friends.

Yes (83.33%)

No (16.67%)

Please write what is wrong and leave recommendations on the article

Cancel reply

Rate this article: ( 6 votes, average: 4.83 out of 5)

Discuss the article:

How to turn off the Tomahawk 434 mhz frequency alarm

You can deactivate the security system by briefly pressing the second button (with the lock open). If the pager is lost, an emergency shutdown function is available using the Override key.

The owner opens the car with the key, sits down, and closes the door.
When the ignition is on, the Override key is pressed 4 times (if the personal PIN code option is activated, the number of presses corresponds to the code digit).
The car will blink its headlights three times, confirming that the command has been processed.
Turn off the ignition and deactivate the alarm.

Snap Tomahawk 9010

The Tomahawk TW 9010 car alarm with auto start can support work with 4 pagers. This also applies to the TZ 9010 model. Setting up one or all remote controls for these anti-theft systems can be done in several stages in different ways. The first option in accordance with the operating instructions is as follows.

You must turn the ignition key to put it in the on position. The car engine should not be running, that is, it should be turned off.
After this, you need to press the OVERRIDE service mode button and hold until 4 siren signals sound. This will indicate that you can begin setting up your communicator.
Then you need to release the service mode button.
After this, you need to press and simultaneously hold down the keys marked “open trunk” and “activate silent security” until a signal sounds that would confirm the installation of a new remote control in the system (one-time beep for the 1st key fob pager, two for the 2nd and etc.). Such a video can always be viewed on some automotive resources.
If you do not perform any actions with any of the remote controls for 6 seconds, the setup will stop after that in automatic mode.

All communicators that have not been activated will be deleted from the system.

Firmware and reprogramming of the 9020 remote control

The Tomahawk 9020 alarm system can support up to four pagers. To record them in the memory of the anti-theft system, you need to perform the following steps.

Turn off the ignition.
Then press the Valet mode button seven times.
After this, you need to turn on the ignition. To confirm entry into the remote control settings, the siren should emit 7 signals.
At this step, you need to press the buttons with the picture of “open trunk” and “silent security mode”. They must be held simultaneously for 1 second. If all actions are performed correctly, the system will write the key fobs into memory (for the first remote control - 1 signal, for the second - 2, etc.).

All pagers not participating in the binding will be deleted from the system.

Setting up the Tomahawk 9030 alarm remote control

Then the ignition key must be turned to the “On” position, after which seven siren signals should sound. The system can now be reprogrammed.

On the key fob, which is to be linked to the control unit, you must simultaneously press the buttons marked “open trunk” and “crossed out speaker”, as stated in the operating instructions. The keys must be pressed and released after the sound signal sounds. The system will confirm the binding of the new device with CHIRPs (for the 1st key fob 1 beep, for the 2nd - 2, etc.).

The system will automatically exit service mode within 6 seconds after the last action performed.

Adding a new X3 pager

The Tomahawk X3 model can support work with 4 key fobs. To add them you need to do the following:

Set the ignition key to the “Off” position.
Press the OVERRIDE button.
Turn on the ignition.
Press the key fob buttons with the “closed lock” and “open lock” markers until the siren signal sounds. For the first communicator there will be one signal, for the second - two, etc.
After this, turn off the ignition. The headlights should flash 5 times, which will indicate successful recording of communicators into the security system memory. All remote controls that are planned to be used in the future must be subjected to this procedure.

Exit from the copybook mode will occur after 15 seconds of inactivity.

Setting the X5 Switch Timing

Before using the Tomahawk X5 car alarm, you must program a new key fob. This action is carried out in several stages.

Tuning Tomahawk 434 mnz

The main functions are changed through a special programming mode. It is activated like this.

When the ignition is on, the Override key is pressed six times.
The ignition turns off, and the car blinks its headlights six times and emits six beeps, confirming the transition.
Each subsequent press of Override corresponds to a transition to setting a specific option (according to the programming table).
Clicking on a specific key on the key fob assigns the corresponding value to the function.

User's Manual

According to the instruction manual:

After installing the security system, you need to check its operation;
use of all functions of the key fob is possible only after binding the communicator;
It is necessary to diagnose the activation and deactivation of door locks when activating and disabling the security mode.

Control key fob

Before use, a working power source is installed in the pager. The battery is inserted into a special compartment located behind the back cover. After removing and installing the battery, you need to press the third button on the key fob.

Identification of symbols and buttons

Indication of modes on the screen of the Tomahawk 434 MHz remote control

Description of the indicators located on the remote control screen:

Icon that the communicator is in the operating area of the transceiver and antenna.
Standard security mode or silent vehicle protection, without siren sounds.
Calling the car owner from inside the car.
The daily automatic engine start mode is enabled.
Warming up the car engine according to the temperature sensor readings.
The "Anti-robbery" option is activated.
Car alarm service mode is enabled.
Vibration alert is activated to notify the user.
The car hood is open or the trigger contacts are not closed.
The vehicle's parking brake is not set.
Indication of power in the remote control battery. If the icon is flashing, it's time to change the device.
Symbol of a running car engine.
The first level of the shock sensor, warning, was activated.
The second zone of the sensitivity controller, alarm, is activated.
The battery saving mode in the key fob is turned on.
Board with the current time. This field also displays information about the engine temperature.
The time of day is indicated as the first or second half of the day.
The car alarm is on.
The countdown timer is activated.
Indicator of open central locking.
All car locks are locked.

Controls on Tomahawk 434 MHz key fobs

How to set up the key fob?

Programming and binding the microprocessor to the remote control is performed as follows:

The car door opens and the key is installed in the lock; you do not need to turn on the ignition.
The button to enter the service mode is pressed seven times.
The key is turned in the lock to activate the ignition system. If the alarm enters the binding menu, the siren will sound seven times.
The first and second buttons are pressed on the communicator. The controls are held until the siren plays one sound. If the binding is successful, the communicator will emit a melody.
The ignition in the car turns off. The external lighting devices should flash five times.

Setting up autorun

Before setting up automatic motor start, perform the following steps:

On a vehicle with the engine running, the parking brake is raised.
The first button on the communicator is pressed and held until a melodic signal is played. Then, within three seconds, the user must “click” on the control again.
The ignition in the car is turned off; the power unit should not stop after these actions. If your car has a Start/Stop button, then this item should be skipped.
The driver leaves the vehicle and locks the doors.

To start the power unit on command, button 2 is pressed and held for several seconds. Then, within 3 seconds after the pager is triggered, the key is “clicked” again. If the function is successful, the external lighting devices will flash three times. This will start the engine, which will run for a period of time configured in advance by the user. The LED on the pager will light up without blinking.

By time

To start the engine at the specified time, the first button is pressed, and after the key fob is triggered, the second key is “clicked” with a melody. The user must ensure that the configured timing parameters are correct in advance.

By temperature

To start the engine based on the temperature sensor readings, press the second key of the communicator. After playing a melodic signal, the control element is released and the first button is “clicked”. If the command is successfully accepted by the control unit, the external lighting devices will blink once.

Video about the features of the Tomahawk 434 Freequency alarm autostart function

Filmed by the channel “228krasava”.

How to use service functions?

Setting up alarm service options:

To enable the remote status polling function, press the third button of the key fob. When sending information to the communicator, the external lights will blink three times. The device display will display data on the security status, as well as the temperature inside the car.
To remotely open the tailgate, the third key is pressed and held. The external lights will flash three times to confirm the function is complete. An indicator in the form of an open tailgate will appear on the communicator display.
The “Search” option is activated by simultaneously pressing keys 3 and 4. The vehicle’s parking lights, as well as the siren, will emit six sound signals.

Alarm programming

To enter the setup menu, perform the following steps:

The ignition turns on in the car, but there is no need to start the power unit.
The button to enter the service mode is pressed six times.
The ignition in the car is turned off. The system will enter the Options Programming menu. To activate and deactivate functions, as well as change mode parameters, use the controls on the key fob.

Table: order of programming the main functions

Number of clicks on “Override”	Function description	Button 1	Button 2	Button 3	Button 4
1	Engine operating time in automatic start mode, min	5	10	15	20
2	Specified temperature threshold for remote motor start	-5	-10	-20	-30
3	Cranking time of the starter mechanism during automatic start of the power unit, ms	800	1200	1800	3000
4	Control of motor operation using signals	According to the voltage in the car's electrical network	According to the oil pressure controller	According to tachometer signals
5	Operating time of the second additional channel, s	0,8	10	30	Constant
6	Duration of siren alarm signals, ms	100	10	15	20
7	Closing door locks during automatic start of the power unit	Locks that are turned on will not lock	Disabled locks will not close	Locks that are turned on will lock automatically	Disabled locks are closed
8	Delay in activation of the starter mechanism before starting the engine, s	2	10	10	10
9	Signal duration for opening and closing the central lock, s	0.8 for locking and unlocking	3.6 for closing and opening	0.8 for locking and double signal 0.8 s for opening	Closing signal - 30 s, unlocking - 0.8
10	Two-stage door opening, immobilizer control or third additional channel	Additional channel control, blocker disabled	Two-stage opening of door locks, immobilizer disabled	Control of the third additional channel, blocker active	Two-stage opening of door locks when the immobilizer is turned on
11	Safe driving option	Disabled	Door locks do not close and open after ignition activation and shutdown	The doors are locked automatically 10 seconds after the ignition is activated.	The door locks close 30 seconds after the ignition is activated and unlock when it is deactivated.
12	Automatic arming	Disabled	Activated without door locking	Enabled with locks closed
13	Accounting for the delay of operation of the lighting system in the cabin, s	1	15	30	45
14	Time to activate the interior lighting system or raise the power windows	Turning on the light for 20 seconds after disabling security	Turn on the lighting for 30 s after turning off the protection	Raising the windows within 20 seconds after activating the security mode	Locking windows within 30 seconds after turning on the protection
15	Cabin temperature units or locking method	Degrees Celsius, additional interlock normally open	Fahrenheit, additional interlock normally closed	Degrees Celsius, lock closed	Fahrenheit, Interlock Normally Open
16	Turbo timer, min	Disabled	1	3	6

Reset

To reset all parameters to factory values, perform the following steps:

The ignition is turned off in the car; to do this, the key is set to the “Off” position.
The button to enter the service mode is pressed nine times.
The ignition is turned on. The siren should sound 9 beeps.
The service mode entry button is pressed once.
The first key is pressed on the communicator.

Breakdowns and their elimination

Any system, like the Tomahawk 434 mhz frequency, can become glitchy and break down over time. Some problems you can solve yourself:

The car does not respond to the key fob. Perhaps there is a lot of interference around and the antenna does not receive communication well. It is recommended to reduce the distance. You also need to check the condition of the AAA battery and, if necessary, replace it. If the problem persists, you need to rebind the pager;
Software glitches are corrected by rolling back to proven firmware versions. Errors are signs of a crude system;
Frequent activation indicates the need to adjust the shock sensor;
When opening or locking doors independently, it is recommended to check the serviceability of the limit switches.

Software glitches and system errors are corrected by specialists with specialized equipment directly to the service. ″ height=”306″[/img]

Equipment

Delivery set of Tomahawk 434 MHz signaling device for cars:

A control module equipped with a processor and a relay assembly. It is supplied for sale in a black plastic case, which bears the manufacturer's markings.
Main pager with feedback function. Its use was made possible thanks to the presence of a display in the key fob. If you look at the communicator screen, you can find out the status of the anti-theft system due to the presence of special indicators on it.
Spare remote control. The device is not equipped with a liquid crystal display, so feedback is not implemented in it. The range of the pager is no more than 15 m.
Sensor for detecting impacts and any other physical impacts on the vehicle body. The device belongs to the category of two-level regulators.
Antenna module equipped with a connector and cable for connection. Supplied with a double-sided sticker for attaching the device to glass.
Additional temperature controller. Intended for installation on a car engine.
Service manual with which the consumer can independently install and configure all functions. The user should understand the technical documentation, since the manual includes electrical circuits for connecting alarm components to the microprocessor.
LED lamp. It is used to determine the alarm status and is supplied with a cable and a connection block.
Button to enter the alarm service mode.
Car engine blocking relay.
Limit switch used for installation on the hood of a car.
A set of wires and fasteners for connecting all devices and fixing them.
A separate button designed to activate the Anti-Robbery function.
User's note.
Guarantee document.
Packing box.

The Tomahawk 434mhz alarm system does not include a siren or door triggers; these devices are purchased additionally.

Owner reviews

Evgeniy, 26 years old:

“Not a bad signal, especially considering the price of the set. At a low cost, it has a large selection of functions that are extremely necessary. I was especially pleased with the autostart based on temperature - just right in winter. Installation and implementation on my car is very simple (I have a Honda Civic 4D, manual). What’s best is that there are no glitches, like I had with Sherkhan (and it’s priced two and a half times higher). So I definitely recommend it to all car enthusiasts who want a reliable, trouble-free car alarm, but are used to counting money.”

Konstantin, 32 years old:

“Decent budget option. There are practically no competitors in its segment (except that Starline is still quite good). The disadvantages are the lack of a mobile application, a weak battery (1.5v AAA, CR2032 Battery), I have already changed it three times in a year. Otherwise, there are no complaints. It works properly and doesn't cause any problems. I regularly use autostart and the turbo timer - there have been no failures. The main difficulty is understanding the user functionality, but this is normal. Now I use it without problems, I’m completely satisfied.”

Types and models

The Tomahawk company produces alarms for different consumers. The range includes anti-theft systems for both high-class cars, for example, the elite X5, and for the middle class. They differ in the set of functions and, accordingly, in price.

TZ-9010

This alarm system, in addition to the basic ones, is equipped with the following functions:

autostart;
anti-grabber;
anti-scanner;
protection against false positives.

If problems arise with the car, the system warns the driver. One of the important advantages is the self-diagnosis function. If a malfunction is detected, the system will alert the owner.

TZ-9020

This model adds non-volatile memory to the functions listed above. This means that the system will remember all settings even if the power is turned off. Another pleasant plus is the presence of an immobilizer.

Security system TZ-9020

TZ-9030

This Tomahawk alarm model has an extended range of about 1200 meters. There is a function to open the trunk from a distance and block the engine in case of unauthorized start.

TW-7000

Although the model was discontinued a long time ago, at one time it was installed on many machines and these devices are still used thanks to their capabilities:

search for a stolen car;
protection against attacks, driver notification;
protection against false positives.

The system has excellent protection against hacking and automatically goes into security mode.

434 mhz

The 434 mhz alarm system belongs to budget models, but is equipped with a full range of functions for ease of use. The key fob has a two-way communication system and is capable of receiving information at a distance of more than a kilometer. For the Tomahawk 434 mhz frequency car alarm, the instructions for use are the same as for other models, so setting it up is easy, having experience with setting up other models.

How to determine the model by key fob?

Tomahawk security system kits are equipped with key fobs with five buttons.

Types of Tomahawk keychains

The company logo is printed on them. Each model has differences that also apply to the key fob.

You can find out the details from the manual, but there are several methods by which you can determine the model and type of alarm:

there is an inscription and marking on the back of the key fob or in the compartment where the batteries are located;
information about the model and brand of signaling can be found on the main unit;
key fobs differ in shape, size, location of the antenna and display.

The Tomahawk alarm keychain has a classic shape with the company emblem in the form of an Indian head with plumage.

What to do if the key fob doesn't work?

Instructions for using the alligator s-825rs car alarm with auto start

Reasons why the alarm does not respond to button presses, as well as ways to eliminate them:

Incorrectly installed battery in the rear compartment. If the polarity is reversed, then the device will not need to be repaired - you just need to change the location of the battery.
The power supply in the communicator has run out. With this problem, the quality of the transmitted signal decreases and commands may be executed only once. Troubleshooting involves replacing the battery.
The internal components of the remote control are oxidized or clogged. The case of the communicator on the Tomahawk 9010 is water-permeable and not sealed, so moisture or dust can get inside. To fix the problem, you need to disassemble the remote control and clean it using cotton swabs or napkins. If this does not help, then you will need to test all contacts and connections on the circuit with a tester; all damaged elements must be re-soldered.
If the remote control is unstable after being dropped, you need to make sure that its case and internal parts are intact. As a result of an impact on Tomahawk 9010 key fobs, quartz is most often damaged. You will need to disassemble the device, visually verify the integrity of the board and test the communicator contacts with a multimeter. If the quartz is disconnected, then its contact joints must be re-soldered and glued to the circuit using thermal paste.
The remote control keys began to stick. If, after pressing the button, it does not return to its original position, then the “click” can be regarded by the control unit as prolonged. The problem is that the keys become dirty, so they need to be wiped externally with an alcohol solution or a toothbrush. In case of serious contamination, the housing is disassembled, and it would also be useful to ring the chain. If the button is damaged, it must be replaced with a new one.
A malfunction of the remote control may be due to electromagnetic interference in the area where the vehicle is located. This often happens near large industrial enterprises, security and military facilities, transformer substations, airports, etc.

How to reprogram an old remote control

You can reinstall an old pager into the program by deleting it and then adding it to the alarm. To remove a key fob from a whitefish, you must reset it, then follow the standard procedure to enter the remote control.

Why do you need to reprogram

The key fob is reprogrammed for the following reasons:

incorrect response to user commands;
lack of response to driver manipulations;
response is too long;
Device freezes.

How to reset settings

On common Tomahawk models, resetting settings is performed as follows:

turn on the ignition;
click on Override a certain number of times;
wait for the system response;
click on the service button again;
Press and hold the indicated keys on the key fob.

After completing the operation, the settings will return to the factory state.

How to set the time

The operation should be performed:

hold down the F key until the clock image starts flashing;
buttons with the image of an open trunk and a crossed out speaker scroll through the minutes;
to set the clock, press F again and scroll through the keys indicated above;
To exit the menu you need to leave the pager alone for 8 seconds.