Relay and fuse layout diagram for Kia Sid 2006-2012 (Kia Cee'd 2006-2012)

Kia Ceed 1 ED, 2 JD (since 2012) and 3 CD generations, their restyled modifications, both station wagon and hatchback, are one of the most popular models on the domestic market. This is a modern car with a lot of electronics. The list of relays and fuses for Kia Sid should be well known to car owners, because the stable operation of the system depends on them. The fusible elements are distributed between two mounting blocks. One of them occupies the left end of the dashboard, and the second takes place in the engine compartment. For a long time, the design of these blocks remained unchanged, not counting individual improvements in 2014 and 2017.

Kia Sid fuse diagram

The first generation Ceed ED station wagon hit the domestic market in 2007 and since then, car enthusiasts have begun to become acquainted with the peculiarities of the location of mounting blocks in this car. The second generation of Kiya was released in 2013, and in 2022 the third CD was released.

The layout of the mounting blocks remained unchanged until the latest modification, although the first additions were made in 2015 and 2016. The detailed layout of the relay and inserts can be found in the user manual in Russian, including the explanation on the cover of the engine compartment module. Installer in the showroom.

№	A	Fuse name	Protected circuit
1	10	START	Starter relay
2	10	A/CON SW	Air conditioning ECU
3	10	HTD MIRR	Heated exterior mirrors
4	15	SEAT HTR	Seat heating
5	10	A/CON	Air conditioner
6	10	HEAD LAMP	High beam
7	25	FR WIPER	Front glass cleaner
8	15	RR WIPER	Rear door window cleaner
9	15	DRL OFF	Turning off the low beam headlights during the daytime
10	10	RR FOG	Rear fog lights
11	25	P/WDW LH	Window ECU
12	10	CLOCK	Watch
13	15	C/LIGHTER	Cigarette lighter
14	20	DR LOCK	Sunroof, ignition ECU relay
15	15	DEICER	Heated front window relay
16	15	STOP	Brake lights
17	15	ROOM LP	Interior lighting
18	15	AUDIO	Radio, on-board computer
19	15	T/LID	Backdoor
20	25	SAFETY P/WDW RH	Locking power windows on the right
21	25	SAFETY P/WDW LH	Left power window lock
22	25	P/WDW	Power windows
23	15	P/OUTLET	Electrical socket
24	10	T/SIG	Switch block
25	10	A/BAG IND	Airbag warning lamp
26	10	CLUSTER	Dashboard
27	15	A/BAG	Airbag
28	15	SPEARE	Reserve
29	15	RR P/OUTLET	Front power outlet
30	10	TAIL RH	Rear right marker
31	10	TAIL LH	Rear left marker

Block under the hood.

№	A	Name	Protected circuit
1	20	ABS2	ESP stability control and ABS anti-lock braking system
2	40	ABS1	ESP and ABS
3	50	B+1	ECU for interior electrical equipment
4	40	RR HTD	Heated rear view mirrors
5	40	BLOWER	Electric fan
6	40	C/FAN	Air conditioning fan
7	20	H/LP WASHER	Headlight washer
8	20	SPARE	Reserve
9	125	ALTERNATOR	Generator
10	80	MDPS	Electric power steering
11	15	FR FOG	Front fog lights
12	10	A/CON	Air conditioner
13	15	HAZARD	Emergency crew
14	10	SPARE	Reserve
15	20	SPARE	Reserve
16	15	F/PUMP	Gasoline pump
17	15	SPARE	Reserve
18	10	ECU1	Motor control unit
19	10	ECU2	Motor control unit
20	20	ECU3	Motor control unit
21	15	INJ	Fuel injectors, air conditioning system
22	10	SNSR2	Sensors
23	15	HORN	Sound signal
24	50	B+2	ECU for interior electrical equipment
25	40	IGN2	Starter, ignition switch
26	30	IGN1	Egnition lock
27	30	ECU	Main relay
28	10	ABS	ESP, ABS, stability sensor
29	10	ECU2	Ignition system
30	10	B/UP	Tail light switch
31	10	H/LP LO RH	Right low beam
32	10	H/LP LO LH	Left low beam
33	20	H/LP HI	High beam
34	10	SNSR1	Sensors

Relay.

№	Relay name	What is he responsible for?
R1	C/FAN 2	Electric cooling fan at low speed
R2	C/FAN 1	Electric cooling fan at high speed
R3	START	Starter
R4	F/PUMP	Gasoline pump
R5	A/CON	Air conditioner
R6	H/LP LO	Low beam
R7	HORN	Sound signal
R8	H/LP HI	High beam
R9	FOG LP	Rear fog lights
R10	WIPER	Wiper
R11	MAIN	Main relay

Kia Sid: cigarette lighter fuse

The protective element in the 2008 modification has the number 13 and a rating of 15 A. But in the SID 2022 its number is already 46 and the power is 20 A.

LED heater fuse

Since 2010, element 12 with a nominal value of 10 A has been responsible. It is located in the engine compartment block.

Starter fuse and relay

The retractor often requires replacement or repair. If the car does not start, the reason lies in it, since the starter does not turn without it. It’s worth considering intervention if you hear something clicking when you start the car. You can find this element directly on the side of the starter, under the hood of the car. The fuse is also located there.

The average price for a part, if you need a new one, ranges from 1500-2000 rubles.

Kia Ceed fuel pump fuse and relay

Number 16 and is located in the engine compartment. There is also a relay located there, marked R4.

Radio tape recorder

So that the driver can listen to music, the Sid manufacturer installs an audio system, the protection of the electrical circuits of which is provided by fuse 18, supplied since 2012, in the interior mounting block. Its nominal value is 15 A.

Windshield washer

The front wiper circuit is protected by a seventh 25 Amp cabin fuse. Relay R10 is responsible for its operation.

Washer does not work

The Ceed chain is protected by fuses 7 and 8 for the front and rear washer. If one of them does not work, then most likely the fuse element responsible for it has burned out and requires replacement.

Cooling Fan

Two relays are responsible for the operation - R1 and R2, for low and high rotation speeds. But there is only one fuse - the fifth in the engine compartment, for 40 Amperes.

Dimensions

The right and left are protected by inserts 30 and 31 of the interior block. They are rated at 10 A.

Low and high beam

No. 31 and 32 under the hood. And the power of both is 10 A. The fuse element of the high beam lamps can be found in the cabin unit, where it is marked as 6 and has the same rating as the previous ones.

Number plate illumination

The factory configuration does not include the element responsible for it.

Wipers

For the normal operation of the windshield wipers in the Ceed, there are 2 fuses located in the interior mounting block: the seventh for the front and the eighth for the rear. The rating of the first is 25, and the second is 15 Amperes.

Where is the turn signal relay located?

Absent.

Fog light fuse

Sid's are divided into different mounting blocks. If the right and left front PTFs are protected by element 11 in the block under the hood, then the tenth interior module is responsible for the rear ones. The power of the first is 15 A, and the second is 10 A.

Brake light fuse

To protect it, the LED uses a 16 by 15 Ampere element in the interior mounting block.

Generator fuse

The voltage regulator can be found on the device to which they are attached with screws.

Window lifter

Fuse element 22 in the cabin block is responsible for it. Its rating is 25 Amps.

central locking

It is protected by fuse 26 in the engine compartment, which is rated at 30 Amps.

DRL

The high beam of the Ceed is controlled by fuse 33 in the engine compartment block. Rated for 20 A.

DRL OFF fuse is on

Responsible for the DRL and connected to the steering wheel light switch. Frequent failure symbolizes insufficient power or problems in the wiring. A 15A fuse is required.

Reverse

Fuse element number 30 of the block under the hood, rated 10 Amperes, is responsible for the reversing light.

USB

№30.

Relay blocks under the dashboard

The relays in the Kia Ceed 1 interior are located in two additional blocks. The first is mounted under the dashboard, in the upper part to the left of the instrument panel. The second is in a niche with Kia Sid interior protective elements.

The relay part of the first Kia Ceed I mounting block includes the following electrical circuits:

• heating complex;
• trunk lock;
• backlight;
• window lift drive.

The second Kia Ceed I unit with a relay part provides operation:

• central lock;
• sound warning of anti-theft system;
• heated windshield;
• built-in-ICM;
• rear fog lights.

Material about the Kia Ceed catalyst at this link.

Rules for replacing fuse links

When changing fuses for Kia Sid 1st generation, the cause of failure of the protective element is first eliminated. To remove a faulty device with a fuse link, special plastic pliers are used. When installing a new fuse, be sure to use one that is identical in current. The installation of jumpers and homemade fuse links is also strictly prohibited. , there is a high probability of damage to the electrical circuit, even leading to a fire in the Kia Ceed I.

Removal and replacement process

To replace fuses you will need:

• Phillips screwdriver;
• tweezers (fixed in the engine compartment);
• fixed key: 10 mm.

Under the hood

The procedure is as follows:

1. Turn off the ignition and stop the car.
2. Remove the terminal from the “-” pole of the battery.
3. Open the unit cover by pressing the latch on the side of the left headlight.
4. Remove the tweezers from the lid.
5. Pull out the blown fuse with tweezers. If it is necessary to replace the fuses protecting the alternator and electric power steering circuits (No. 9 and 10), unscrew the 2 mounting screws with a Phillips screwdriver and remove them.
6. Install replacement or new parts.
7. Close the block and install the terminal.

What else should you pay attention to?

Most often, clogging or freezing of the liquid occurs in the lines supplying it to the nozzles. Sometimes, due to driver forgetfulness, the washer reservoir is empty. Problems are created by the use of “counterfeit” antifreeze or ordinary water. In some cases, the use of two different types of liquids leads to precipitation, which easily clogs the main pipes and nozzles.

If this happens on your Kia Sid car, the system should be thoroughly rinsed, blown with compressed air, and the fluid replaced with a high-quality one. Fluid used out of season must be changed, otherwise it may freeze. If this happens, the system needs to be warmed up. To do this, the car must be placed in a warm place. This could be a heated garage, underground parking, or other similar places.

Share this article with your friends:

Block in the cabin

It is located under the instrument panel on the driver's side, behind the protective cover.

On the reverse side of which the actual purpose will be printed in the form of a diagram.

Scheme

Description

Fuse No. 46, 20A, is responsible for the cigarette lighter.

Location of all control units

General layout of all electronic units and control components.

Description

1	ABS electronic control unit
2	Electronic air conditioning control unit - in the air conditioning/heating control panel
3	Sunlight sensor (air conditioning system) (with automatic lighting control system)
4	A/C/Heater Blower Motor Control Module - Next to Blower Motor
5	A/C/Heater Fan Motor Relay
6	Air purity sensor
7	Shock sensor, left
8	Shock sensor, right
9	Side impact sensor, left - upper part of the B-pillar
10	Side impact sensor, right - upper part of the B-pillar
11	Anti-theft alarm sound
12	Generator excitation circuit resistor
13	Accumulator battery
14	Speed ​​control system control unit (cruise control)
15	Diagnostic connector (DLC)
16	Power window relay - in the fuse/relay box under the dash
17	Electronic engine control unit
18	Fuse/Relay Box, Engine Compartment 1
19	Fuse/Relay Box, Engine Compartment 2 (Diesel)
20	Fuse/Relay Box, Instrument Panel
21	Rear window defroster relay - in the under-dash fuse/relay box
22	Beep (upper)
23	Beep (lower)
24	Electronic immobilizer control unit (Diesel)
25	Immobilizer ring antenna - near the ignition switch
26	Instrument cluster illumination rheostat relay (with daytime running lights) - in the fuse/relay box under the instrument panel
27	Instrument cluster control unit
28	Multifunction switch control unit
29	Multifunctional control unit - functions: Anti-theft system, central locking, daytime running lamps, electric windows, hazard warning lights, headlights, rear window defroster, windshield defroster, interior lighting lamps, seat belt warning system, tail light relay, windshield cleaner/washer
30	Ambient temperature sensor - 1
31	Ambient temperature sensor - 2
32	Parking Assist Control Module - Behind Right Rear Trim Panel
33	Parking system buzzer
34	Power steering control unit
35	Rain sensor
36	Rear Window Wiper Relay - Behind Left Rear Trim Panel
37	Relay unit - functions: Anti-theft alarm horn, central locking, windshield defroster, fog lights, rain sensor
38	Fixed power supply (stop-start system)
39	Seat heating control unit, left. - under the seat
40	Seat heating control unit, right. - under the seat
41	Brake lamp fault monitoring unit - behind the right rear trim panel
42	Electric sunroof control unit
43	Electronic control unit SRS
44	Tail light relay - in the fuse/relay box under the instrument panel
45	Rear door actuator relay - in fuse/relay box under dash
46	Electronic transmission control unit
47	Selector and/or ignition key lock control unit
48	Tire pressure monitoring control unit
49	Displacement/acceleration sensor

Replacing fuses KIA Ceed

• Discussion of the section Replacing fuses for KIA Ceed
• Cerise
• I bought a Lanos from a car dealership and it’s warm there
• Petra Chebykina
• For Ford Focus 3 station wagon, also make a video on how to change the cigarette lighter fuse
• Foss
• I think the Chinese have scammed you))))
• Spence

In general, the car was built for me over time) It turned out that in the control unit, a leg of one of the microcircuits broke off and it came off, creating this problem. The asking price in Moscow is 5,000 rubles and two days of work.

Vusal

Good afternoon, How can I check why the speaker is not working? Car: Honda CRV.96 right hand drive. The speaker itself works if you put it in a different slot or another door. There is no signal in the right door wiring. Thank you!

Uzun Tilonov

Hello Misha. where is the horn relay for HONDA SRV RD1. right hand drive?? thanks in advance, if you know, please let me know guys...

1. Azina Ruzana
2. Thank you, very useful video!
3. Demyakina Stefania
4. That is, you need to do the same thing with a multimeter in dialing mode, do I understand correctly?
5. Albion

*94 liters per minute??? You probably confused it with the figure 9.4 l/min*

• Baktiyar
• Replace the cabin filter
• Duca
• please write your phone number
• Tendril
• 'Don't pull' the car on the handbrake
• Amantay
• Question for the owner of the car, why did he go there to set it up and didn’t mark himself before “setting up” everything?
• Koba
• I don't give a damn what you bought where you went
• Chayan

Could it be that even when it’s hot, it starts up and revs up to 2.5 thousand?

Daria

A great auto electrician, he understands everything thoroughly and does it in a humane manner without any messy twists. Honor and respect!

Weeds

The most intelligent diagnostician, it’s a pity we have almost no such people, greetings from Kazakhstan!!! Good luck, bro)))

Isen

Good day! Please tell me!!!!!!the right turn light is on, but does not blink! And it does not turn off until I remove the battery terminal, changed the turn relay, the problem remains ((((what do you recommend???

Reeves

thank you. very helpful. I didn’t know it was really that easy

Dominic

So what was the cause of the short circuit? Still haven't found it? Is the wire melted?

Cinelev Hood

Are there identification marks on the wiper relays? I can't find it all in Chinese.

Cat

75,000 thousand mileage is it too early to change the mesh?

Ksenya

Well done. How to make a control?

1. Evgen
2. When you come to Floresti, I will give you one
3. Vagan
4. Thanks for the video, otherwise such a group on a Prado costs 20k, I almost cried)
5. Shirvan

HBO stood bro...

• Kambar
• After reading it again I realized that the cigarette lighter is on the top and on the bottom it’s the same, it just says 12V, that’s where there is no power, although according to the system there’s a radio at the top and a fuse socket at the bottom
• Gulia

What does calm mean? How to get it, what? Interesting for beginners.

Bria

There was a reason that under the steering wheel some kind of snot was shorting out the steering wheel!! stalled at the turn!!! But no!!) HANDSOME GUY!)

1. Batu
2. Sergey good afternoon, Volvo s60 2007 error p2227 crashed, cause of error and how to fix it
3. Paradise
4. Well, how can you do this carelessly. disgusting to watch
5. leave a comment

Checking the electrical circuit

To check the electrical circuit Kia Sid, the following methods are used:

• Finding the location of the short circuit is done using a multimeter or an indicator light. The devices are installed in the same place as the removed fuse . In this case, there will be no voltage. Next you will need to run the wiring harness. If you observe a blinking lamp or voltage surges, you should look for a damaged conductor. Most likely, the insulation on it is broken, which leads to a short circuit to the car body.
• Checking the reliability of the contact connection with ground - with the battery disconnected, the indicator lamp is set to a known good ground. In this case, the second contact of the lamp is connected to the electrical circuit being tested. If the lamp lights up, there are no problems with the contact and vice versa.
• Checking the continuity of the circuit - operations are performed after de-energizing the on-board network of the Kia Ceed I. Next, an indicator light with an external power source is used. To test an individual conductor, you will need to connect the ends of the lamp at the beginning and end of the wire. The absence of light from the lamp indicates a break. In the same way, the on position of the switch is checked, but the ends of the lamp are installed on the corresponding contacts.

DIY KIA Ceed fuses replacement

All on the topic Replacing fuses for KIA Ceed

• Brown
• My brother is such a fucking idiot
• Anthony
• Why don't you show how the connectors are connected back?
• Murat

Thanks to the author - it helped, even with the alarm set.

Greenwood

I will give you a possible reason why the old air flow meter failed. It costs second generation HBO, which is undesirable on engineering engines. I think that a bang hit the intake and the flow meter was torn apart... If so, then this new flow meter will not last long with this 2nd generation LPG. Apparently there isn’t even a firecracker in front of the throttle...

Aurelia

handsome!!! I also use Victor sealant and use antifreeze hepu :) The video is normal, at this rate you will be known as Travnikov :) in Ukraine there are also video bloggers chotkiy!!! thanks!

Chevalier

Thank you buddy! Respect. I subscribed!

1. Zane
2. Hello, can you do the same for the Nissan Xtrail T30? The thing is that I bought a Nissan X trail 2.2 dci Elegance Columbia 6 speed manual transmission and the spare key initially did not work and I changed the battery but nothing helped, tell me if I can do something, I will be very grateful to you
3. Jeanelle
4. Seryoga, do you have a dacha near the airport?))
5. Nera

Useful, thanks! Especially the log function. They say that if you sit in the garage for a long time, the mafon eats up the power. And I watched the review of the 2-din radio tape recorder Prology DNU-2650... not a bad device!

• Tamirlan
• Thank you Victor, the car will be on the move tomorrow
• Akib

I looked at the title and thought, what... friends! We bought a car for a friend...

Brune

Trouble guys, if you mess it up like this, the engine ECU won’t see the engine speed. that is, everything seems to be fine until the engine warms up, then it just starts to slow down. I'll take the brains apart and repair them. then I'll post what happened

1. Miley
2. useful video
3. Onegin

thank you very much for two weeks, it’s been soaring, it starts up, then it doesn’t, I tried everything, there was air in the pipes and the airy system and I put the return line directly from the pump, all this is nonsense, kengo works even with air, but I didn’t pay attention to the light bulb, I thought it went out when I started the engine, I pulled the fuse and aleluya it started but there is also a battery in the key and it came from here and the instability preliminary diagnostics over the phone was terrible or the fuel pump or injectors or brains but not a word about immo or they don’t know or????

• Hasmik
• Misha question: central locking control unit for honda cr-v rd1 where is it located?
• Noisy

Hello. There was a problem: the DPKV wire got onto the exhaust manifold and got burnt, the car won’t start. I started looking and saw that the wire was shielded, please tell me how to restore the wire or change the entire braid?

Maximilian

Tell me, what can I fill the ECU board with after soldering (welding) instead of semi-liquid gel? Considering that you may have to disassemble it more than once, so as not to be dead. Opel Vectra used Simtec 70

Write a comment

Source: https://chinusam.ru/kia-ceed/predohraniteli/