The “simplest” on-board computer for the Lada Granta is the BC STATE X1-G. It is compatible with ITELMA M74, M75 units, as well as BOSCH ME17.9.7. The connection is made to the OBD connector, which is located in the cabin. No additional power is required. We will look at how to install it, as well as how to update the firmware. Sometimes you need to update it immediately to get compatibility with a new car. Therefore, read the review carefully.
All functions of BC STATE in one video.
Description STATE 115 X-23 M - (discontinued)
On-board computer with text display (16 characters on 2 lines) and blue backlight.
Sound accompaniment with a squeaker.
This BC does not have an input for connecting gas equipment.
Compatible with all types of BOSCH, JANUARY, ITELMA controllers, including E-GAS.
Video review of BC State 115 X-23 M
Trip computer with two independent mileage and consumption counters, as well as the ability to view previous parameter values (before reset) for one type of report.
Diagnostic tester, allows you to read errors and operating parameters of the ECM.
Eight multi-displays (MD) with a variable set of parameters and one multi-display with automatic change of parameters depending on current conditions.
The BC has a “TAXI” mode, which allows you to display the cost characteristics of the trip and the cost of fuel consumed.
The BC has a “DYNAMICS” mode, which allows you to measure and display the dynamic characteristics of the car.
Functions PLAZMER (drying and warming up spark plugs for cold engine starts), TROPIC (automatic control of the cooling system fan when the engine temperature specified by the user is reached), FORCING (reset of the controller learning memory when switching “gasoline” / “gas”, leading to the state of the original factory settings) installations for gasoline with an octane number of at least 95)
Emergency alarm for critical events, as well as warnings about the expiration of insurance and the need for maintenance.
Photo of the on-board computer STATE 115 X-23 M:
Instructions and manuals STATE 115 X-23 M:
Installation and Operation Guide - Download PDF
Firmware and programs for the on-board computer STATE 115 X-23 M - SOFTWARE STATE 115 X-23 M
Possible names:
staff, shtat, staff 115×23, staff x23, 115 x23-m, x23m, on-board computer, trip computer
| Main characteristics of the on-board computer | |
| Fastening | To a regular place |
| Display type | LCD RGB |
Avtobortovik.ru team will ensure delivery of goods to any city in Russia, as well as to all CIS countries and the world. We work with the country's leading forwarding services - Russian Post , Business Lines.
Cost and delivery time:
Type of departure
Delivery period
Cost of delivery
Russian Post Ground (prepaid)
200-400 rub. (depending on the region and weight of the item). When ordering from 3000 rub. Free shipping applies.
Russian Post Ground (cash on delivery)
from 300 rub. (depending on the region and weight of the item). Shipping costs are pre-paid (new customers only).
Russian Post 1st class Air (prepaid)
from 300 rub. (depending on the region and weight of the item).
Russian Post 1st class Air (cash on delivery)
from 400 rub. (depending on the region and weight of the item). Shipping costs are pre-paid (new customers only).
Business lines to the terminal (prepaid)
from 350 rub. (depending on the region and weight of the item). Delivery costs are paid upon receipt.
International delivery (prepaid)
600-1500 rub. (depending on the country and weight of the item).
After shipping the goods, we send you a message with the bill of lading number, by which you can track the movement of your parcel. To track the movement of your parcel using the bill of lading number, follow the link:
To a simple question - do you need a car computer in your car - many of us will answer in the affirmative, although we may not fully understand all the tasks and problems solved by the State family of on-board computers. It's not even a matter of wanting to have a nicer and more convenient information system. Tolyatti specialists, who have developed several interesting models, tried to guess the demand for more comfortable conditions for driving a car. Support for the State car on-board computer is carried out by specialists from State LLC together with Tolyatti State University.
The goals for which a car enthusiast puts a new electronic device in his car, often with his own hands, are easy to list:
From simple to complex
Of the more than twenty main models, the simplest and cheapest on-board computer is the X1M Universal. The device is equipped with a digital indicator, is very small in size and can be easily mounted on the dashboard of VAZ cars. Designed for installation on Kalina, Niva-Chevrolet, VAZ 2110 or Samara 2.
Despite its modest appearance, the main functions of the ultra-compact on-board computer command respect. For connection in the car, the OBD II diagnostic connector or the Russian diagnostic connector block is used.
In almost all even the simplest on-board devices, the State is implemented with a basic set of functions:
In addition to the above, additional service functions are implemented in State on-board computers. One of them involves programmable activation of the fan, allowing it to be started to cool the radiator at 97-98 o C instead of 101-104. The Tropic mode is fully implemented only on later versions of the device. In addition to the alarm functions of monitoring the thermal regime, it is possible to automatically turn on the mode according to a programmed algorithm.
The “Afterburner” option is considered useful, allowing the State on-board computer to return to the original software settings of the controller if the engine for some reason is operating in an off-design mode. This is possible if the control controller fails when switching from gas to gasoline mode and vice versa.
Stories from our readers
Digital errors on the on-board computer are easy to decipher. To fully launch the BC, all that remains is to connect the K-line.
The wire with the sensor can be taken out from the passenger compartment through a hole in the engine shield under the speedometer cable, next to it. The preliminary stage of installing an on-board computer on a car is to select the appropriate tools that will be needed during the installation process: a classic set of automotive screwdrivers; directly the on-board computer of the car; standard wire is about 1 meter. BK10 on VAZ2110
More advanced models
More advanced are the on-board car computers of the State 115X23-M model, designed for use on Samara 2 and Samara cars. This model is equipped with a two-line display that allows you to more fully display on-board computer message information. To the functions listed above, you can add the appearance of options for calculating cost and mileage, as well as the “Dynamics” mode. The latter allows you to measure and display the dynamic characteristics of a car's movement. Taken together, the State 115X23-M computer is more suitable for implementing the functions of special delivery vehicles.
The State 115X42-M car on-board computer model differs from the previous one in having a more advanced display and the presence of a number of additional, very useful modes - “Taxi”, “XX Control” and “Engine Diagnostics”. The latter mode allows you to use the car computer to check the operation of the injectors and gasoline pump. The State on-board computer implements the “Sleep Mode” system, a reminder service about the timing of maintenance and the validity of the insurance policy. Like the previous model, this on-board car assistant is designed for use on Samara 2 and Samara cars.
The Chevy Vector M car on-board computer model deserves special attention. Despite the more than twofold difference in price with the simplest X1 model, the Chevy Vector M State has enormous capabilities and potential.
The most interesting new modes and functions of the on-board computer Chevy Vector M staff:
The Chevy Vector M car on-board computer has a built-in non-volatile memory that allows you to save all settings after a complete blackout of the on-board network. Almost all major State models have the ability to control the installed software version, and, if necessary, download information for updating via the Internet.
In addition, State 115X42-M and State 115X23-M have the ability to connect to other VAZ models using a special adapter.
In the video you will find an overview of the on-board computer State:
Controller types
The computer is compatible with all types of controllers BOSCH, January, Itelma, Avtel, except January 4.1, GM, including E-Gas. The computer has non-volatile memory, which allows you to save all data when you remove the terminal from the battery.
Functionality
Parameters of the current trip readings of the remaining fuel in the tank readings of the average speed for the trip readings of the average fuel consumption for the trip travel time speed readings of the distance traveled for the trip readings of fuel consumed for the trip forecast of mileage on the remaining fuel travel time readings of gas consumed gas level taximeter previous data on trip
engine temperature readings tachometer throttle position ignition timing angle on-board network voltage air consumption current vehicle speed voltage on DC1 and DC2 temperature in the intake manifold injection time injectors fuel consumption IAC position ECU software version 8 dial-up multi-displays and 1 automatic multi-display
Those. maintenance and diagnostics
Next maintenance date Oil changes in the engine and gearbox Replacement of air and fuel filters Replacement of the timing belt and generator Reading errors ECM Plasmer Fast and Furious OSAGO expiration date CASCO expiration date Fuel quality control vehicle dynamics parameters Acceleration dynamics Braking dynamics Engine diagnostics Fuel pump circuit operation test Injector balance measurement
Settings and Settings
display brightness display color display contrast speed threshold cooling fan activation temperature greeting rarely/often “favorite function” button “clock” button displaying the status of the automatic door lock mode reset settings
Additional bookmaker settings
Taxi mode cost of 1 km mileage cost of supplying a car cost of a liter of gasoline speed threshold idle control set idle speed signal on the LPG contact sign of door opening choice of voice messages male/female
Connection settings
type of ECM controller source of fuel level sensor gas tank volume cylinder volume selection of source for fuel consumption and mileage data maintenance warning MTPL warning
Loading factory settings
Fine adjustments of the BC, mileage correction, consumption correction, clock correction, voltmeter calibration, fuel level calibration in the tank, gas consumption correction, external air temperature correction, BC diagnostics
Alarms and warnings
wishes for a safe journey the side lights are not turned off; maintenance is close ; And HAPPY HOLIDAYS to everyone!
Tuning menu
Failure of Temperature Sensors Occasionally, due to exposure to extremely low temperatures, off-board temperature sensors may fail.
Installation features and computer connection procedure
Remove the on-board computer, having first unfastened all the wires connected to it.
Features of connecting the VAZ on-board computer Saturday, July 27 The VAZ error code is deciphered using certain codes. Sometimes it is necessary to reset all data on fuel consumption, travel time, etc. Yes, morally I have matured, but financially I could not cope. I also advise you to download the application to your phone, it’s much more convenient to work from your phone. Only a touchscreen from the Sony-Ericsson G phone is added. Why do you need an on-board computer? At cost, it turned out to be about rubles.
You can remove the on-board computer on a VAZ in the following way: Remove the battery terminal; Stick your hand into the opened niche and release the BC fastening; Remove the BC by disconnecting its plug and wires; The radio is then installed in place. I continued to dig further and came across binary options. How to connect HBO and the on-board computer “State”
Installation instructions for on-board computer
In this article we will look at the process of installing the Prestige on-board computer with diagnostic and error reading functions.
For work we will need:
Screwdrivers, on-board computer, 1m long wire.
We remove the plug on the central dashboard and look for a 9-pin wiring block in it. This block must be present on all cars of our model. All that remains is to connect the block to the computer and that’s it, but we need to draw a K-line.
How to draw a K-line?
For a more complete and clear idea of the work, a diagram is presented.
What to do if there is no socket for the on-board computer under the instrument panel?
In this case, all that remains is to assemble a new block: buy a 9-pin block and run wires to it according to the following diagram:
fuel consumption signal (green wire) ignition (orange wire) + 12 volts (red/white wire) red wire with white stripe ground (black) speed sensor (brown wire) 6k line (most often gray or black wire) mute (green /red wire)green wire with red stripe
backlight (white wire, or can be taken from the size button)
fuel level sensor(pink)
About replacing the device and the list of required tools
Which computer should I install? There are models of trip computers on sale that are specially adapted for the LADA Kalina electronic control system and have more advanced functionality. Manufacturers include instructions with the controller, which are an indispensable assistant during installation.
To quickly and efficiently install (replace) a new device in the LADA Kalina panel, you will need to acquire the following set of traditional tools:
The instructions provide detailed information regarding the functionality of the new device and techniques for its correct installation. A detailed diagram of all electrical connections is also provided. We recommend that you carefully follow the manual while performing the entire list of installation procedures. After installation, the owner of a LADA Kalina car receives more detailed information about the state of important systems that are included in the overall electronic complex of the car. The instructions also describe in detail how to use the device.
How to connect the State on-board computer to a VAZ 2110 (instructions)
With the advent of more modern technologies, domestic cars began to be equipped with on-board computers. The VAZ 2110 model was no exception.
Thanks to the on-board computer on the VAZ 2110, you can check for yourself what condition the car is in, what problems have arisen and how to solve them.
Versatile alternative
Of course, thanks to their various mounting locations, Multitronics on-board routers can compete with the States. Powered by a 32-bit processor, multitronics are precise and fast in operation. If a car enthusiast has the opportunity to buy such an on-board computer, then the car will be under excellent control thanks to functions such as:
- a large number of diagnostic protocols, including extended ones;
- transfer and save all driving statistics to a personal computer;
- voice accompaniment;
- parking radars, etc.
All of the above functions of the State on-board vehicle have been added to the multitronics. In addition, the latter have easy setup for operation and a convenient user interface. But due to all this, the price will be much higher than that of a compact and more suitable State Grant.
Initially, it was possible to buy on-board computers for the Lada Granta only from the official one. Since sales of this car started at the end of 2011, for some time the unavailability of additional equipment for the Lada made it not very popular among car enthusiasts. However, it is now possible to buy on-board computers from official dealers and various suppliers of automotive products and equipment.
Installing an on-board computer allows you to monitor problems in the operation of the internal systems of the car. The most popular device model STATE GRANTA x1 is already used by many motorists.
Owners note the ease of use of the device and its high quality. It includes 30 useful functions, which are controlled using two buttons.
The main reasons for installing an on-board computer on a VAZ 2110
There are several objective reasons . Why is it rational to install and use on-board computers on the VAZ 2110:
Such a device costs only 2,000 rubles, so it is recommended to install it. This will not require serious financial expenses, but the return and benefits from the on-board computer will exceed all your expectations.
Video “Main functions of the BC X-5 M in Kalina”
The video below demonstrates the options that the device performs (the video was filmed and published by the channel In Sandro’s Garage).
Many experienced car owners, when purchasing a new Kalina 2, immediately notice a significant drawback of this car - it does not have a coolant temperature indicator. Fortunately, solving this problem is quite simple using the on-board computer (BC). The most popular bookmaker for the new Kalina is State X1-G. This on-board computer was developed for the Granta, but due to the structural similarity of these cars, it is also suitable for the second generation Kalina. The manufacturer himself recommends this particular BC for Kalina 2, so no problems should arise.
Installing an on-board computer on a VAZ 2110 with detailed instructions
Each standard on-board computer on the VAZ 2110 comes with instructions . according to which you can dismantle the old BC and put a new one in its place. Therefore, first of all, arm yourself with this guide.
It’s not difficult to figure out for yourself how to connect an on-board computer to a domestically produced VAZ 2110 car . It is necessary to act consistently and follow stages.
By following fairly simple instructions, you should be able to connect the VAZ 2110 BK to your car without any problems. Carefully study each point, think about whether you can really do everything yourself.
As we have already noted, the approximate cost of a new on-board computer intended for installation on a VAZ 2110 car is 2 thousand rubles. There is no need to purchase additional tools or materials for self-installation, that is, the whole process will cost you 2 thousand.
When you contact a service station, you will be asked for about 2 thousand rubles more to connect the on-board computer. This is the best case scenario.
Considering the relative simplicity of the work, there is no need to trust it to car mechanics. By consistently performing each step and following the instructions, you will be able to equip your VAZ 2110 with an on-board computer with your own hands.
Source
Hello! I am writing my review after it “burned out” due to my fault and I purchased another on-board computer: My review about the Orion BK-16 On-board computer and how the 115X23-M burned out.
And here is a little review of the BC (on-board computer) State 115X23-M. Used it on a VAZ 2115. It also works for some other cars from our manufacturer.
The set of functions is quite standard:
Most of the features are useless. Since to use them, you need to spend a lot of time setting up the bookmaker.
— The backlight becomes a little dimmer when the headlights or side lights are turned on. This is convenient in the dark and not entirely sunny weather.
— There is such a function as warming up the candles. I never managed to use it when it was really necessary. Outside, it’s minus 20 degrees Celsius and the BC starts to “freeze”, and the screen doesn’t display anything except the backlight. The buttons are hard to press. There is no sound confirmation of a button press. Accordingly, when the spark plugs flood in the cold and need to be warmed up, you won’t be able to do this with the help of an on-board engine. Even if this function is added to the “favorite function”, which is called by a single click on the button of the same name.
— A very useful function is the choice of temperature for turning on the cooling fan. Very useful for those who have problems with motor overheating due to untimely turning on of the fan. After all, the ECU is programmed to turn on the fan temperature at 102 degrees Celsius, and my car boiled at this temperature.
— ECU memory reset. Works fine. Resets errors and completely resets the ECU memory.
— There is a set of error codes in memory.
— You can enter insurance information (end date), oil change date, timing belt, etc. into the BC memory. And the BC will notify you when it is necessary to replace a particular spare part, or about the expiration of the insurance period.
The buttons, as can be seen in the photo, are made of the same plastic as the body. They are pressed with a characteristic “cheap” click. Blue backlighting of buttons and screen.
The photo above is from their archive when BC was still operating. This is the format it displays ECU errors. The error code is displayed here, and if you press the “right arrow” button, it will give a description of the error (decoding).
On the left side of the BC there are holes for the speaker, which reproduces only short tones. The white cross to the left of the screen is an emergency light. Lights up red when there is a fault.
In general, the option of purchasing such an on-board computer can be considered as worthy of attention.
Source
What is a plasma device in a car, and why should it be turned on?
The car has not only obvious functions, but also hidden ones, the presence of which many drivers are not even aware of. One of these options is “Plasmer”. Let's figure out what it is and why this option is needed?
Option - assistant
This option is designed to make it easier to start the engine in the cold season. It is used when the car has been left in the cold for a long time without moving. Since the winter start of the engine is accompanied by a large load on all its units, there is a need to somehow reduce this load and make the engine easier to operate. Activating the “Plasmer” option enables pairwise operation of the spark plugs in idle mode. That is, current is supplied to the spark plugs and a spark occurs, but there is no fuel-air mixture in the combustion chamber, which means the engine does not start.
