how to set the time on the on-board computer of a VAZ 2114

1. Install 2. Reset
The ignition key must be set to ACC (I) or ON (II) position.

Press and hold the SET button for approximately 2 seconds until the time display begins to flash. Release the button. Then press the SET button again to set the minutes and hours.

When you have completed setting the time, press the SELECT button to start the clock.

When the clock's time display is flashing, press the RESET button to reset the clock. The clock will be set to show the time in hours.

If the clock is reset at a display reading between 9:01 and 9:29, for example, the time will be reset to 9:00. If a reset occurs between 9:30 and 9:59, the time will be reset to 10:00.

When the power is turned off, the time is automatically reset to 1:00.

If the car is equipped with an audio system, then the clock is built into the system itself.

How to set the clock in the instrument panel of a VAZ 2114

Category: Detailed car maintenance guide

Vehicle characteristics: The dimensions of the car are as follows: length - 3013, width - 1100, height - 1925 mm. The wheelbase is 2329 mm. Ground clearance 157 mm. The car is equipped with a hybrid power unit. The 4-cylinder engine is equipped with a system that provides engine power output. There are 4 valves per cylinder. The diameter of one cylinder is 70 mm, the piston stroke is 78 mm. The engine crankshaft accelerates to 4000 rpm. Maximum torque is maintained up to 2000 rpm.

Posted by admin: at the request of Gaspar

Watch the VIDEO about how to set the clock in the instrument panel of the VAZ 2114.

Original title: Herhen bagts tsag luggage sambar VAZ 2114

Release date: 04/02/2014

Laughter on the topic: - Girl, maybe we should turn off the light and go to bed? - Man, I’m not sleeping with a man I’m seeing for the first time. - So what should I do before Vladivostok, smoke in the vestibule?

Video instructions: how to set the clock in the instrument panel of a VAZ 2114

Designation of icons on the instrument panel of the VAZ 2114

The instrument cluster on the VAZ 2114 is located on the left side of the dashboard, which motorists often call a “torpedo”. The dashboard also contains various switches and indicator lights that are necessary to control lighting equipment, heater and other important units.

Instrument panel VAZ 2114

Purpose of VAZ 2114 devices and interpretation of the symbols on them

Located on the left side of the dashboard, directly in front of the driver's seat, the VAZ 2114 instrument cluster plays an important role in driving. It contains pointer instruments, VAZ 2114 indicators with electronic digital windows and signal lights for various purposes.

The numbers on the scale indicate:

The graphic symbol of a gas station at the top of the device indicates a fully filled tank. At the bottom right, an indicator in the form of a gas pump lights up in orange, indicating that the remainder in the tank is less than six liters.

Designation of light bulbs and indicators on the instrument panel of the VAZ 2114

The dashboard, by definition, is designed to contain instruments, indicators and switches that could inform the driver about the current state of various vehicle systems, signal an emergency during the operation of the car or the failure of any units, as well as using buttons and switches control individual equipment or mechanisms.

The designation of icons on the instrument panel of the VAZ 2114 is made in accordance with all requirements and standards that call for the unification of symbols so that they are absolutely clear to every driver. The symbols on the instrument panel of a VAZ 2114 with the latest injection engine are located mainly in the lower part of the instrument cluster:

Indicators VAZ 2114

1 - the icon of the light indicating that the oil level in the engine crankcase has dropped below the minimum level, lights up in red;

2 - this light indicates an insufficient level of washer fluid; it lights up orange when the remainder in the tank is less than one liter;

3 - this icon, lighting up in orange, indicates a decrease in the coolant level in the expansion tank with a cold engine below the permissible level;

4 — warning light icon for unlocked doors, lights up red;

5 — fault indicator for “brake lights” or dimensions;

6 - this is a warning light for a malfunction in the brake system, indicating that the brake pads are worn out;

7 - light bulb icon that indicates unfastened seat belts.

On earlier versions of the car, the designation of the light bulbs on the dashboard of the VAZ 2114 in the lower part is slightly different, when viewed from left to right:

Designation of icons on the instrument panel of the VAZ 2114

In addition, car enthusiasts should know what the lights on the VAZ 2114 instrument panel mean, indicating the performance of the lighting equipment or the condition of the engine:

Identification of buttons

It is also important to know the designation of the buttons on the VAZ 2114 panel. On the instrument cluster on the right side there is a button (11), with which the time and temperature on the digital indicator are switched, and when pressed for 5 seconds or more, the current mileage is reset, if pressed this button on a stationary car.

In the central part of the dashboard are located in a row:

Double headlight switch. Button 1 turns on the dimensions, button 2 turns on the low beam;

Buttons on VAZ 2114

Key switch block. The first 1 turns on the front fog lights, the second 2 turns on the rear fog lights and the third 3 turns on the heated rear window.

How does a bookmaker differ from a control panel?

Many car owners are sure that there is no need for an on-board computer; all data is displayed on the dashboard, and that’s enough.

But let's take the speedometer as an example. As you know, it reads the engine speed, converting from to speed. But if you install wheels of larger diameter, the speed will increase, but the dashboard will work according to the old scheme, that is, you will exceed the speed limit, although everything on the speedometer is “within the limits of the law.”

Universal model

Simple clamps do not cope with their tasks as well as BC is capable of it. In theory, it is possible to calculate only from the dashboard the amount of fuel used, current and average fuel consumption, the number of kilometers traveled, and so on. But why sit behind the wheel and calculate something, be distracted, if you can just get an on-board vehicle and look at its screen, receiving the necessary information based on changing parameters.

VAZ 2114 instrument panel: finding out what's what

An element such as the dashboard of the VAZ 2114 allows the motorist to accurately monitor the most important parameters of the car’s condition while driving, as well as timely receive information about problems that have arisen in it. It includes components such as the instruments themselves, control icons, display panels, as well as buttons and lights.

Devices and their purpose

As mentioned above, the VAZ 2114 tidy includes several devices, namely:

The first of these devices is the tachometer. It is located in the center left of the instrument panel. This device is designed to monitor current engine speed. Its scale is graduated at intervals of 5 units, and the maximum value indicated on the scale is 80 units.

As you can see, the interval from 55 units to 60 is highlighted with red shading, and the interval from 60 to 80 units is completely red. This is a critical interval, which indicates that the engine at such speeds is working at its limit and there is a possibility of its failure.

Directly below the tachometer is an indicator panel that displays the ambient temperature and the current time.

To the right of the tachometer, also in the middle of the dashboard, is an induction speedometer. It allows you to instantly monitor any changes in the speed of the machine. The scale of this device is calibrated in increments of 10 km/h, and the maximum speed shown on the speedometer is 200 km/h.

Directly below the speedometer there is an indicator panel that displays the current (from the moment of zeroing to the present) and total (for all time) mileage of the car.

Guided by the readings of the induction speedometer, you should remember that the minimum error of such devices is at least 5 km/h, and the maximum can reach 10-15 km/h.

On the very left edge (to the left of the tachometer) the VAZ 2114 panel contains an indicator of the current coolant temperature. The readings on it come from an electronic temperature sensor. The interval of divisions on the instrument scale is 20 degrees C, and the maximum possible point is 130 C. It should be noted that the interval from 105 C to the upper limit of the scale is highlighted in red, which indicates the danger of further movement.

If the instrument needle enters the specified interval, you should immediately stop the car, turn off the engine and allow it to cool. Otherwise (if you continue to drive), the engine may fail as a result of overheating.

Instruments for temperature and fuel level readings in VAZ 2114

On the far right side of the panel, to the right of the speedometer, there is a device indicating the current amount of fuel in the tank.

Its scale is graduated through 1/4 of the total volume of the tank, and has additional numbers and symbols:

It is worth noting that operating a car in which one or more main instruments do not work is extremely undesirable, since this can lead to errors in driving and possible serious damage to the vehicle’s components (and driving with a non-working speedometer, on top of that, is illegal).

Looking at the instrument panel of the VAZ 2114, you will notice that in addition to the main instruments, there are additional lights and illuminated icons on it. They play a very important role and inform the motorist either about turning on/off any functions or about the critical condition of certain components and assemblies of the car.

It is worth noting that the badges on all makes and models of cars are unified according to the international standard. This was done so that the car owner could always accurately and accurately determine their value.

Designation of the VAZ 2114 tidy icons

Let's take a closer look at these icons and their purpose:

In addition, the instrument panel of the VAZ 2114 of earlier releases had several additional symbols that were located in its lower left part, namely:

Along with these icons there was also a red low oil level icon, made in the form of an oil can.

Thus, the icons on the dashboard cover almost all the main parameters that indicate the condition of the car, and allow the driver to immediately take measures to eliminate any malfunctions that have arisen.

Buttons

In addition to the main instruments, lights and icons, the panel itself also contains a number of buttons responsible for turning on/off certain useful functions.

They look like this:

Useful video

You can find additional interesting information in the video below:

Finally

As you can see, everything is quite simple, and if you want to learn how to accurately understand the readings of instruments, icons and lights, you can quite simply, and the five buttons located on the dashboard itself should not cause any difficulties at all.

Published July 27, 2018

Brief instructions for use

The on-board computer in question is a structurally complex electronic design capable of performing about 500 options. The STATE variation is interfaced with the VAZ 2114 ECU, which ensures normal operation of the device. To use the computer correctly, you should study the purpose and functionality of the BC control buttons located on the dashboard.

It is not necessary to keep in mind the decoding of all the codes; you just need to print them out and take them with you. Important notices:

2
– excessive voltage in the on-board network;
3
– problems with the fuel indicator;
4
– signals a violation of the temperature regime of the power unit;
6
– indicates engine overheating;
7
– critical decrease in pressure in the lubrication system;
8
– violations in the brake unit;
9
– battery discharge.

It happens that the BC issues codes incorrectly due to the failure of a sensor. However, you should not ignore checking the car, since, most often, the activation of errors indicates a malfunction. After fixing the problem, you should reset the processor. This procedure is performed by turning on and holding the daily mileage button.

What parameters does the BC screen display?

By connecting the onboard vehicle, you will be able to access a large amount of information and data about the operation of your car.

Parameter displays

Most computers suitable for the VAZ 2114 display the following data:

Vehicle speed;
The volume of fuel remaining in the tank;
Travel time;
Engine speed;
Fuel consumption indicators;
Engine heating degree;
Temperature inside the cabin;
The distance that the car can travel on the remaining fuel;
Distance traveled by the car;
Voltage in the on-board electrical network;
The amount of heating of the coolant;
Throttle position;
Total air flow;
Error codes and their designation in understandable language;
Average car fuel consumption;
The amount of fuel consumed for the current trip;
Distance traveled during the trip in kilometers;
Average speed;
Other useful information.

PURPOSE OF THE ON-BOARD COMPUTER

An on-board computer on a car is an electronic computer device designed to monitor the status of various components of the car and transmit information to the car owner. Depending on the technical equipment, on-board computers (BCs) can vary in complexity, and accordingly, the price of the device can vary significantly.

The VAZ 2114 car is equipped with BC 2114-3857010 as standard from the factory. The device is mounted on the panel to the right of the instrument cluster at the same level with it. On those VAZ models that are not equipped with such a device, there is a plug in the standard place on the instrument panel and there must be a 9-pin connector for connecting the device.

In the “native” BC 2114, you can view the following parameters on the display:

The “Lux” package is equipped with an AMK-211501 on-board (or route) computer, which has added firmware that allows you to diagnose the electronic engine control system (ECM). But many owners of VAZ models 2113, 2114, 2115 are not satisfied with the standard equipment with its limited functionality, and they strive to install a more advanced BC with a larger set of controlled parameters. They can be understood - now there are many different models from different manufacturers.

The smallest BC State X-1M is made in the form of buttons.

BC State X-1M

It is mounted above the standard location of the trip computer instead of push-button plugs. Among the interesting additional functions of the device are:

In total, the device has 30 functions, and the BC costs about 1000 rubles. More expensive trip computers are installed in a standard place and are more functional. On the display of the Orion BK-46 model you can see up to 7 controlled parameters simultaneously, and when the battery is disconnected, all data is saved in memory in the device. The issue price is about 2500-2800 rubles.

One of the most advanced BC models for the VAZ 2114 is the “Gamma GF 415T”. Here you can see interesting features such as:

There are a lot of controlled parameters, the cost of a bookmaker is in the range of 4000-4600 rubles. Many systems are equipped with audible alerts, and these computers are very easy to use.

Device installation

The domestic model VAZ 2114 is equipped with a place for mounting the BC. It is closed with a control plug, which must be carefully removed. The installation work is facilitated by the presence of a special set of wires with a nine-pin connector. It must be connected to the corresponding input of the device. The main interaction between the device and the machine is activated by connecting the brown wire to the “M” (Euro 2) or “7” (Euro 3) socket. The opposite end of the wire is inserted into the input socket of the device. The operation of the computer is tested, if everything is normal, the installation can be considered complete.

If it is necessary to dismantle the BC, the following manipulations are performed:

The system is de-energized by removing the terminal from the battery;
The radio control panel is dismantled, along with it;
Through the resulting window, the BC fastenings are disconnected;
The device is removed after first disconnecting all connected devices;
The radio and panel are mounted in place.

CONNECTION

The connection diagram for the on-board computer on the VAZ 2114 is simple - it does not require special training or special qualifications. Therefore, you can connect the on-board computer to the VAZ 2114 with your own hands; detailed instructions are always attached to each device.

The connection principle is the same for all BCs, so let’s take a closer look at how to install an on-board computer on a VAZ 2114:

That's all, the installation of the on-board computer on the VAZ 2114 has been completed.

ERRORS

On the on-board computer you can read all the errors that occur in the ECM. Deciphering the VAZ 2114 error code follows certain codes. If there are no errors, the message “No errors” lights up on the display. The list of errors is large, so we will list only the most common error codes for the VAZ 2114:

0134 – no oxygen sensor activity;
0116 – coolant temperature sensor error;
0172 – enriched fuel mixture;
0300 - presence of misfires;
0340 – phase sensor is faulty;
0505 – failures in the XX regulator.

Errors on the VAZ 2114 on-board computer are reset according to the instructions for each specific model by pressing a button combination, but a general reset can be done by temporarily disconnecting one of the battery terminals.

Sources:

https://autocenter-neva.ru/kak-nastroit-chasy-na-bortovom-kompyutere-vaz-2114 https://zen.yandex.ru/media/id/5c87a4b998f53700b45ed19b/5defbdd7e882c300b08a8d96 https://autovaz-2114. ru/electrical-equipment-in-the-car/kak-ustanovit-bortovoj-kompyuter-na-vaz-2114/

SETUP AND TROUBLESHOOTING

Setting up the on-board computer is not always required; for example, the BC 2114-3857010 is easy to use and requires almost no settings. Each device displays its own parameters, so you need to read the instructions for the BC and follow the recommendations from the manufacturer.

If the VAZ 2114 on-board computer does not work, you need to check:

Sometimes it is necessary to reset all data (fuel consumption, travel time, etc.). As a rule, the instructions contain instructions for this (usually a reset button). But if there is no instruction or it doesn’t say anything about it, then you can reset the indicators like this:

The readings should reset to zero.

HOW TO USE SUCH DEVICES: BRIEF INSTRUCTIONS

For installed devices, instructions are included for the standard on-board computer of the VAZ 2114. It informs and instructs car owners in detail about what needs to be done in a given situation. Let's talk about how to use the VAZ 2114 on-board computer. To use it correctly you need to:

These trip computers are highly complex electronic devices capable of performing more than 500 different functions. All this requires the driver to carefully study this device. The instruction manual helps with this. It is good to study it with the information board turned on;
When studying, the most attention should be paid to the icons and symbols of emergency commands.
The dashboard has buttons that control the operation of the VAZ 2114 BC. You need to learn and remember the rules for working with them.

When choosing such devices, there are no special requirements for them. The selected model must support programs for the VAZ 2114 ECU. Today, the cost of a VAZ 2114 on-board computer can range from 1,500 to 4,000 rubles. In online stores you can find even lower prices for these products.

It makes no sense to memorize all possible error codes displayed on the information board. They don’t need to be recited by heart like in school. We live in the age of Internet technology, find the designation of these error codes, print them out and carry them with you in the car. If you see the symbols on the information board, you can quickly make the right decision. Continue driving further, or call technical assistance. Unfortunately, there are times when the on-board computer erroneously issues a danger signal. The culprit in such cases may be some sensor or the processor itself. No one is immune from electronic malfunctions, but in most cases, the display indicates reliable information.

Below will be shown the main possible error codes on this machine:

2 – on-board network voltage exceeded;
3 – problems with the fuel level sensor;
4 – malfunction with the sensor that monitors the temperature of the motor;
5 – incorrect signal from the outside air temperature sensor;
6 – signal about overheated motor;
7 – pressure in the vehicle’s lubrication system is too low;
8 – problems with the braking system;
9 – undercharged battery.

You should respond to codes 4, 6 and 8, which need to be eliminated and only then continue further movement. After elimination, a processor reboot is required. Errors are reset by pressing and holding the daily mileage key.