Setting the time on the Lada Granta on-board computer

There are several reasons why you will need information on how to set the time in the domestic Lada Granta. Often, when you buy a new car at a dealership, the clock shows the wrong time. Failures in the electronic system of a car also occur due to various unfavorable factors from the influence of the external environment, for example, in windy, excessively frosty, too snowy or even rainy weather.

On a domestic Lada Granta, the clock may suddenly start showing a completely different time; this is a factory defect, and you will have to figure out how to set the time in your car. Numerous owners of Grants write on various large forums that it is necessary to set the exact time on a model when it is in constant use quite often.

To change the incorrect time on the popular Lada Granta yourself, you don’t have to be a professional car service employee, and you don’t even have to be a car mechanic or an experienced car enthusiast. You can easily and simply do everything yourself, the main thing is to know how to set the clock on the device.

If you know how to set the time correctly on the Lada Granta model, then this procedure will take you very little time. When you set the clock to the actual time for the very first time, and use your knowledge to figure out how to set everything yourself, then from now on you will be able to quickly set the clock in absolutely any situation when it goes wrong, and sometimes this happens at the most inopportune moment.

It should also be noted here that when setting the clock directly in the Lada Granta, there is absolutely no difference what configuration of the model it is, whether it is “Lux” or “Standard”, the time will be set the same everywhere.

What is needed to set up the time in the grant?

The clock in the Grant car we are considering today is located on a modern liquid crystal screen, respectively, on the instrument panel.
All digits on this clock are significantly larger than any other digits or symbols on the rest of the screen. The display, in addition to the exact time, displays fuel consumption, total and daily mileage, and other information data. Kalina starter repair

Lada Kalina won't start reasons

Lada Kalina fuel consumption per 100 km

Now you need to pay special attention if you want to know how to set the time with your own hands in a modern liftback from the AvtoVAZ automobile manufacturer. You must determine exactly where the following controls are located in your car:

Button for self-control of the car dashboard display. This is the same button that resets the so-called daily mileage.
A car ignition switch, or a size switch located on the instrument panel.
The lever that controls the windshield wipers (this is the so-called steering column switch on the right). This lever performs various functions, including it always scrolls in a circle the modes of direct operation of that same display, thus displaying information about the current time, fuel consumption, and mileage.

Automatic transmission diagnostics

Diagnostics of the gearbox is also possible, but limited by the Granta ECU itself. Yes, you can use professional, expensive car scanners, but we are talking about self-checking.

Using an adapter and an application on a smartphone, you can see errors in the transmission; if there are any, their decoding will indicate one or another malfunction of the box. Also, in real time, data from temperature sensors is taken from the box.

Automatic transmission errors:

P0720 “Output shaft speed sensor is faulty” P0717 “Turbine speed sensor” P0706 “Automatic transmission selector. No signal" P0705 "Automatic transmission selector. Several signals at the same time" P0974 "On-off solenoid. Open circuit" P0973 "On-off solenoid.

Circuit shorted to ground" P0963 "Pressure control solenoid. Open circuit" P0962 "Pressure control solenoid. Circuit shorted to ground" P0740 "LOCK UP SOL(Open)" P0743 "LOCK UP SOL(GND short)" P17AB "L/C SOL(Open)" P17AA "L/C SOL(GND short)" P17AE "2-4 /B SOL(Open)

" P17AD "2-4/B SOL(GND short)" P17B1 "H/C&L&R/B SOL(Open)" P17B0 "H/C&L&R/B SOL(GND short)" P1735 "INTER LOCK FUNCTION(1st)" P1736 " INTER LOCK FUNCTION(2nd)" P1737 "INTER LOCK FUNCTION(3rd)" P1738 "INTER LOCK FUNCTION(4th)" P0744 "LU CLUTCH(Lock-up)

» P1744 “LU CLUTCH (Slip Lock-up)” P0731 “Incorrect automatic transmission ratio in 1st gear” P0732 “Incorrect automatic transmission ratio in 2nd gear” P0733 “Incorrect automatic transmission ratio in 3rd gear” P0734 “Incorrect automatic transmission ratio in 4th gear” transmission" P17A1 "NEUTRAL FUNCTION(1st)

» P17A2 “NEUTRAL FUNCTION(2nd)” P17A3 “NEUTRAL FUNCTION(3rd)” P17A4 “NEUTRAL FUNCTION(4th)” P17A0 “NEUTRAL FUNCTION(Rev)” P0712 “Oil temperature sensor, low reading” P0713 “Oil temperature sensor, high reading » P0711 “Oil temperature sensor, frozen” P0863 “CAN bus connection (initialization)” P062F “BACKUP MEMORY” P1701 “Controller supply voltage”

To watch online, click on the video ⤵

Setting the Lada Grant clock 2022 Read more

How to set the clock on a Lada Granta Read more

Setting up the Lada Granta watch More details

LADA GRANTA LIFTBACK (setting the clock and other functions of the on-board computer) More details

Setting the clock and time zone on the Lada Granta Fla More details

Setting the clock on Kalina and Priora Read more

Lada Granta FL dashboard on-board computer Read more

Setting the clock on a VAZ - Lada Granta More details

Setting the clock on a VAZ - Lada Kalina 2 More details

Setting the clock and time zone LADA GRANTA FL LUXE (With cruise control) More details

Lada Granta Automatic Setting the Clock All Computer Secrets More details

NEW GRANT FL: THE MAIN SHOOT OF THE TRANSMISSION HOWL (lada granta FL 2020)! COMPARE WITH LADA VESTA? More details

Reconnecting the Datsun radio - operation without ignition. More details

NEW GRANT FL DO YOU NEED AN ALARM?? (lada granta FL 2022 how autostart works) More details

Resetting fuel consumption in the luxury Lada Granta FL 2020 with cruise control More details

Lada Granta (Lada Granta). Installation of radio and acoustics. Inexpensive version of the Chinese Soundmax. More details

MANDATORY IMPROVEMENTS FOR THE NEW LADA GRANT FL (lada granta FL sedan 2022 at a minimum) More details

Diagnostics of the dashboard Lada Granta Read more

✅KALINA CROSS ITS HIDDEN FUNCTIONS OR YOU DIDN’T KNOW ABOUT THEM Read more

Trip computer

Lada Granta instrument panel pinout Trip computer (MK), shown in Fig. 37, is installed in a variant version instead of a clock in VAZ 2110, VAZ 2111, VAZ 2112 cars. The MK has 15 functions, divided into 3 groups (see Table 2). The group is selected using buttons 1, 2 and 3.

In each group, functions are divided into basic and additional. The main functions are navigated through the ring using buttons 1, 2 and 3. Additional functions are navigated through button 5. When the ignition is turned off, the computer is always in the “Current Time” mode. When the battery is removed, the clock progress and all accumulated parameters are retained for at least 1 month.

How to set the time of the Lada Granta fl

After restyling, the Lada Granta FL acquired not only a new appearance, but also an updated dashboard, on which new functions and controls became available. The readability of the on-board computer has also been improved, and its setup has become easier.

The time settings on the dashboard may differ depending on the configuration of the Lada Granta FL, let's consider them in order.

On all trim levels, setting the time begins with a long press of the button on the dashboard (see photo above), hold it down when the total mileage of the car is displayed on the on-board computer. At the same time, the first part of the time, responsible for the clock, will begin to blink.

If the equipment of your Lada Granta does not include control buttons located on the steering column wiper switch, then all time adjustment will be done using one button on the dashboard. After switching to the time setting mode (as written above), use short presses to change the numbers on the dashboard.

New Lada: Lada Granta covers in Balashikha from 2290 RUR

After setting the desired hour, wait 5 seconds, after which you will proceed to editing the minutes. Every five seconds of inactivity, a transition will be made to editing the next functionality, after minutes you will be able to set the time zone, and after waiting another 5 seconds, exit the time setting mode.

In the Lada Granta FL, which has three buttons on the steering column, setting the time will be much easier. To do this, after entering the time setting mode, press the RESET key to switch from hours to minutes or to the time zone, and use the side keys (see photo above) to adjust the selected value. Having set the correct date, press the key on the dashboard and exit the setup mode.

In the Lada Granta FL configurations with six control keys on the windshield wiper switch, the time is set using keys 3 and 4, and buttons 1 and 2 are used to switch between hours, minutes and time zone. Exit the setting by pressing the Menu/Exit button (see photo above).

It is worth noting that sometimes it is enough to set only the time zone value for the time to be displayed correctly. In this case, the time zone in which you are located will be displayed on the dashboard. This function will only work if the signal from the GLONASS/GPS systems is constant and stable.

Source

Lada Granta liftback (2019). Guide - part 4

The transition to the time setting mode is made by long pressing the control button 20 (Fig. 29a) when the total mileage counter is displayed. In this case, the clock digits go into flashing mode. Further actions depend on the presence of control keys on the windshield wiper switch. If there are no control keys on the windshield wiper switch, the clock is set by pressing control button 20 (Fig. 29a). When you pause pressing for more than 5 seconds, you go to setting the minutes; setting the minutes is similar to setting the hours. The following pauses of pressing for more than 5 seconds switch to the time zone setting mode, and then to exiting the time setting mode. With a windshield wiper switch with 3 control keys (Fig. 29c), the readings are set using the and keys (item 2, Fig. .29c) . The “RESET” key (pos. 3, Fig. 29c) switches the adjusted parameters in the sequence “hours” - “minutes” - “time zone”. Exit from the time setting mode by pressing the control button 20 (Fig. 29a) or a pause in pressing any key for more than 60 seconds. With a windshield wiper switch with 6 control keys (Fig. 29d), the readings are set using the and keys (pos. 3 and 4, Fig. 29d), and switching the adjusted parameters using the and keys (pos. 1 and 2, Fig. 29d). Exit the time setting mode by pressing the “Menu/Exit” key (pos. 6, Fig. 29d) or pausing to press any key for more than 60 seconds.

Note. In the area of reliable reception of signals from GLONaSS/GPS systems, it is enough to set only the time zone; the hours (taking into account the time zone) and minutes will be set automatically.

Rice. 29th century Switch

with 3 control keys

Rice. 29 Switch

with 6 control keys

The functions of the on-board computer are indicated in field 3 (Fig. 29b). The list of functions and control of the display are determined by the presence of control keys on the windshield wiper switch. If there are no control keys on the windshield wiper switch, only “coolant temperature” is displayed in the field of the on-board computer. If there are control keys on the windshield wiper switch, switching the displayed function is carried out operated by the keys (pos. 2, fig. 29c) or (pos. 2, fig. 29d) in direct sequence and by the keys (pos. 2, fig. 29c) or (pos. 1, fig. 29d) in reverse order .Resetting (resetting) the route parameters (items 5–8 of the table) is carried out by long pressing the “RESET” key (pos. 3, fig. 29c) or “Menu/Exit” (pos. 6, fig. 29d) with -cations of any of the route parameters.

Source

What are the advantages of the device?

Commercially available on-board controllers, adapted for Lada Grants, are equipped with displays and are endowed with a significant amount of information memory. This feature is very useful for owners with poor eyesight, and will also prove to be an indispensable assistant for female drivers who are unsure of the purpose of the information elements of the dashboard.

In view of the noted features, the on-board controller can contribute to more comfortable driving due to the efficiency and timeliness of providing the driver with route information. After all, it is capable of displaying information regarding the following points:

travel time;
fuel consumption during various driving modes;
average speed and specific fuel consumption;
remaining fuel equivalent to mileage;
speed of the car at the start of movement;
fixed motor temperature at a certain time, whose control avoids overheating of the unit;
occurrence of malfunctions in Lada Granta units that have feedback from the control unit;
timely heating and drying of candles;
temperature inside the cabin and a similar parameter outside.

In addition to the indicated functions, the on-board computer is equipped with options, including:

non-volatile storage device;
the ability to generate a signal about emerging problems;
supervisor: the option warns about the unauthorized start of the car (rollback), left lights and turn indicators on;
“afterburner”: the function allows you to cancel memory data that implies the use of fuel of questionable quality, and during sudden acceleration, return to the original settings.

To activate this option, you must use 95 gasoline as fuel.

The on-board computer in the basic modification is marked “State X1 M” (“Multi-Set”). This is the highest priority option for the Lada model family. Thanks to its compact dimensions, it can be easily integrated into the seat on the panel. If you are inclined to purchase a “standard” device, you will find instructions and cabling in the kit.

The on-board computer “State X1 M” has a processor capable of processing the entire amount of information required by the driver regarding the operation and diagnosis of on-board systems.

The computer diagnostic tester is equipped with a plasma lamp, a digital tachometer, and a speedometer. The tester allows you to accurately determine the position of the throttle valve of the power system and monitor the condition of the electrical network on board. This useful option allows you to prevent a possible short circuit or fire in the cable network in the car.

List of sensors and signal indicators on the panel

The diagram shows a detailed layout of the devices present.

The instrument cluster on this car, as the instructions show, has the following sensors:

Tachometer (for instant recording of the crankshaft speed).
Motor control module malfunction indicator.
Signal lamp indicating left turn is on.
Indication of low oil pressure in the engine.
ABS indicator lamp.
Signal indicator of a malfunction in the immobilizer assembly.
Symbol for indicating increased coolant temperature in the engine cooling circuit.
A lamp indicating an emergency condition of the brake system components.
Right turn indicator indication.
Battery charge level indicator symbol.
Speedometer (speed controller).
Indication of directional stability.
Indicator that the transmission is not allowed to move to the next stage.
High beam symbol.
Stern fog light indicator.
Activated low beam lamp.
Indicator that the front fog lights are on.
Button for resetting the daily distance traveled.
Route controller display.
A lamp signaling the need to close the doors.
Low fuel level indicator.
Symbol of lack of required tire pressure.
Fault lamp in the electric power steering system.
Seat belt indicator.
Indicator of breakdowns in the motor unit (infrequently used).
Airbag integrity and serviceability indicator.

The dashboard will definitely tell you the following:

If, after starting the engine, the engine status indicator does not “disappear,” then this implies a malfunction in one of the components of the unit or its attachments.

If the low oil pressure lamp in the Lada Granta engine continues to blink after starting it, then it becomes necessary to check the operation of the lubrication system components (pump, pressure reducing valve, etc.), as well as the condition of the cylinder-piston group.

The ABS indication, if this system is in good condition, should be deactivated after a couple of seconds from the moment the engine starts.

The lamp, indicating an excessively high coolant temperature in the engine cooling circuit, stops lighting 5 seconds after the engine starts. When this phenomenon is not observed, there is a likely risk of engine overheating. Here it is recommended to check all components that influence the maintenance of a “normal” (working) temperature indicator.

If the brake symbol is active when the engine is running, you should check the level of the corresponding fluid (reservoir under the hood) and top up if necessary.

The activated indication of the unit that provides directional stability “tells” that it is disabled.

A signal appeared from the fuel reserve lamp - it became necessary to replenish the tank with fuel.

If the status indicator of the electric power steering mechanism lights up, this fact confirms the presence of a malfunction in this unit.

When the pressure inside the LADA Granta tires reaches a minimum, the corresponding symbol informs about this moment.

When the engine is running, the lamp responsible for indicating the airbag cannot be illuminated.

From this it can be seen that the entire list of sensors and indicator symbols that the instrument cluster contains around the perimeter is endowed with a traditional character. They are informative and understandable even for customers who have touched the steering wheel of a Lada Grant for the first time.

Setting the Lada Granta clock

Opinion of a car owner named Isaac: The main thing is high ground clearance, LED headlights and a 360-degree viewing system. The headlights feel brighter in the dark than xenon; the auto high beam function is on. It doesn’t work perfectly, but literally I thought that “Eh, I’ll turn it on myself” after 1-3 seconds it turns on itself. It turns off without any complaints. The interior is equipped with leather.

So where your “silhouette” leather sits, on the sides there are inserts made of zama leather (Nothing cracks). I immediately put the braid on the steering wheel - otherwise it would quickly become shiny. By the way, the leather on the seats is not ventilated, even in the top-end configuration (by the way, the only difference is that the seats are beige and the ceiling is Alcantara 19 wheels). The ground clearance is the envy of the Gods.

There were no curbs yet in MCK where you could drive by striking the bottom or “skirt” of the bumper. And in our snowy winter now mixed with melting snow - this is important. 360 vision system. IDEAL FOR PARKING, but of course when the cameras are clean. The rear of the camera is washed with special. a trickle, but the front and sides - just wipe them yourself. I recommend it.

At night, you can also see everything very well, they are infrared. In reality, it parks itself, but only when it “stops in the box.” But if you need to stand up crookedly, you can adjust it on the cameras. DO NOT STOP BEFORE THE OBSTACLE CAM, so be careful.

New Lada: Replacement of front struts, springs and supports on Priora

If you press the CAMERA button a second time, the right side of the car near the front wheel is displayed on the display - very convenient in MCK yards, where graph paper is easy. At the same time, the sensors operate clearly, no matter how dirty they are.

Category: Car repair yourself

Vehicle characteristics: The vehicle dimensions are as follows: body length - 3177, width - 1100, height - 1961 mm. The wheelbase is 2536 mm. Ground clearance 114 mm. The car is equipped with a hybrid power unit.

The 4-cylinder engine is equipped with a system that provides engine power output. There are 4 valves per cylinder. The diameter of one cylinder is 74 mm, the piston stroke is 78 mm. The engine crankshaft accelerates to 5000 rpm.

Maximum torque is maintained up to 2000 rpm.

Posted by admin: at the request of Herbert
Views: 2536
Original title: Nastavenie hodin Lada Granta

Source

Rules for driving a car with an injector

A car equipped with an injector is less susceptible to ambient temperatures. However, in severe frost, the injection Lada also experiences difficulty starting. Here it is worth using the on-board computer with the function of heating spark plugs. Every time the temperature drops below a certain value and the car is turned off, a special heating of the tips is carried out to ensure a stable engine start.

Also, the VAZ engine sometimes overheats, which can cause valve burnout and costly overhauls. However, this is possible if the cooling system is faulty. If necessary, you can activate the Tropic function for the on-board computer of the VAZ 2110.

Installing a computer on a VAZ 2110 will open up a lot of good options and has a huge number of advantages:

the presence of a trip computer allows you to find out about the power reserve;
the ability to combine a computer and a navigator;
option for heating the spark plugs of a disabled vehicle;
the ability to check errors and eliminate them immediately. Replacing the bearing that caused the malfunction significantly
cheaper than subsequent extensive repairs.

Resynchronization of remote control codes

In cases where the remote control buttons are pressed outside the range of the radio channel, the “floating” code counter in the remote control goes out of synchronization with the counter in the system control unit. If the number of button presses outside the signal reception area of the system exceeds 1000, the system stops responding to remote control commands. In this case, the remote control training procedure should be repeated.

Updated August 01, 2022

Due to the increasing number of cases of lost training (master) keys for car owners of Kalina, Priora, Grant, Niva-Chevrolet, we are introducing a new type of service: registration of working keys in these cars, without a master key!

Usually in such cases, it is necessary to change a set of blocks: ECU (electronic engine control unit), APS unit, glass control unit, ignition switch complete with door cylinders and new keys, etc.

Now in our company you can register a working key with buttons without a training key, and for an additional fee you can receive a new training (red) key for your car. For this procedure, you need to come by car and leave it while the work is being carried out.

The work includes dismantling the necessary units (ECU, APS, etc.) from the car, programmatically changing data, installing units on the car and registering keys. We emphasize that a key registered in this way will cost more than registering a remote control yourself if you have a training key, but naturally cheaper than buying and replacing a set of blocks with new ones.

Update January 05, 2022

Attention! It is now possible to make a duplicate chip for autostart using a working key with remote control buttons! A master or training key is not required. The chip obtained in this way can be used both for installation in the immobilizer bypass unit to implement autostart, and for everyday use, starting the engine of Lada Kalina, Priora, Niva-Chevrolet cars.

Such a duplicate is more expensive than a regular chip, which can be registered using a master key, but this is a real solution in cases where the master (training) key is lost. To create a duplicate, you need a car, a working key with remote control buttons (and it doesn’t even matter if it is partially faulty, for example, the buttons don’t work, etc., the main thing is that the ignition key starts the engine). The entire copying procedure takes 10-15 minutes. Contact us by phone in contacts.

Maintenance schedule and work performed

Having studied the basic information about maintenance for cars of the Lada Granta line, it is worth taking a separate look at when the first maintenance of the car is carried out, how the 8-valve version differs from the 16-valve version, and what list of works is relevant for this or that maintenance.

Zero maintenance

Although this is considered the first maintenance, in fact it is zero, since it is not relevant for all versions of the Lada Grant.

The so-called TO-0 has its own characteristics, provided for by the instructions of the domestic automaker dated March 20, 2013.

According to this directive, for 8-valve engines installed on Lada Granta, only valve adjustment is required as part of zero maintenance. This is done in the period from 2 to 3 thousand kilometers.

If there is a 16-valve engine under the hood, TO-0 is not required, nor is it necessary to make any entries in the service book.

Therefore, it is often important to study the list of necessary work on Lada Granta cars within the framework of 1, 2, 3 and all subsequent regulated maintenance. By following the established schedule and completing the required list of work, it is possible to maintain the machine in optimal technical condition.

TO-1

It is carried out one year from the start of operation, or after 15 thousand kilometers.

This includes the following checks and work:

a complete list of work prescribed for all maintenance;
replacing the cabin filter;
checking belt tension and adjusting valves (for 8-valve versions);
cooling system and antifreeze level;
electrical equipment;
gearbox oil level and signs of leaks;
suspension;
steering mechanisms;
electrolyte in the battery;
brake pads, cylinders and boots;
clearances on the steering rack;
steering rack play;
air conditioner.

All work, except the first 3 points, belongs to the category of additional.

TO-2

Valid after 2 years or after 30 thousand km.

Mandatory work includes:

all activities for TO-1;
changing the air filter;
fuel filter;
alternator belt;
spark plugs.

Additionally, you need to check the brake pads and the condition of the brake assembly.

TO-3

Required after a mileage of 45 thousand kilometers or after 3 years from the start of operation of the vehicle.

It is necessary to perform the following work:

operations within all maintenance;
replace the cabin filter;
fill in new brake fluid;
adjust the valve clearances and check the tension of the alternator belt (8-valve engines);
change the coolant.

Additional checks include the work prescribed in TO-1.

TO-4

As part of the 4th scheduled maintenance, the list of work is similar to that carried out at TO-2. The exception is replacing spark plugs.

It is carried out when the mileage reaches 60,000 km.

TO-5

Valid for 75,000 km. mileage or 5 years from the start of operation of the Lada Granta.

As part of this service you will need:

perform work and inspection in accordance with TO-3;
change antifreeze (coolant);
install a new oxygen sensor;
pour new oil into the manual box;
change the timing belt if it is an 8-valve internal combustion engine.

As you can see, the work is repeated periodically, and the routine procedures do not differ much from previous maintenance.

TO-6

This is already an impressive 90 thousand kilometers. However, within the framework of this maintenance, the same operations are carried out as in the case of TO-2. But you will also need to replace the brake fluid.

TO-7

As part of the conditionally final maintenance at around 105 thousand kilometers, the work is similar to that performed at maintenance-1.

Recommendations

In my user manual, it is written about setting the time on page 51. And the note states: “In the area of reliable reception of GLONASS/GPS signals, it is enough to set only the time zone, the hours (taking into account the time zone) and minutes will be set automatically.”

...Personally, I have not tried to enter the time setting mode. )

Well, what, there is a Glonass era block. It is just integrated into the CAN bus interface. Well, it gives out coordinates and time, and probably also GPS speed, just in case. The tidy reads this.

So outwardly there are zero changes, but in fact a lot depends on the software.

Who is he giving it to? Not the Ministry of Emergency Situations, not the ambulance, not the cops - they don’t see your cows...

This is stupid satellite communication, so that you yourself can transmit your coordinates in the event of an accident, in which you, for example, lost consciousness :))).

New Lada: How to set the time of the 2022 Lada Grant

The driver of a car with the GLONASS system gets into an accident, the car calls itself, the operator answers: Hello, how can I help? Driver’s “corpse”: I got skidded here, on the highway, in the taiga, wrapped around a tree, can I send a hearse over such and such barks and let it go faster, it’s just that a bear is wandering around here, it will eat it and there will be nothing to bury...

What I mean is that in case of an accident, it is of ZERO use! Well, not really, for example, if you punctured a tire in the middle of the taiga and Siberia, there is no cell phone reception and you know what kilometer of the highway you are stuck on and the number of this road - then GLONAS will be useful (call for help before it freezes, or a hungry bear to go around did not leave his territory). In anything else, it is useless!

And I almost forgot, in case of a tire puncture, they will call the nearest dealer, calling a tow truck... The dealer will issue an invoice for the towing to the driver. And you can wait for a tow truck for a very long time, since dealers mainly live in large regions, and not in the taiga, only the tents of the Ministry of Emergency Situations are scattered in the forests - but no one will call them (you didn’t get into an accident, the wheel was just punctured :))) and don’t give a shit that a bear might eat you, you need a car from the Ministry of Emergency Situations - climb a tree and call 112, at least try :))) ).

source

conclusions

There is no need to go to a dealership to set up your watch. The setup procedure is described in great detail in the vehicle's owner's manual. But we tried to describe everything in more detail, use it. Don't forget to say thank you in the form of a like!

Let's sum it up

As you can see, there are no difficulties or obstacles to setting the time in the popular LADA Granta. The main thing is to follow the entire sequence of actions and you can easily set everything up in a matter of minutes. These setup instructions are also included in the user manual. Having done this procedure once, all subsequent times you will do without instructions, and in any place and time, you will make adjustments if necessary. Let us remind you that these setup instructions apply to all Grants, regardless of configuration.

Reviews from Lada Granta owners about the functionality of the dashboard

№	Positive
1.	Nikolay, 39 years old: in general, I am satisfied with the information content of the console, the display is bright. True, it shines a little in the sun, but this is not so significant.
2.	Konstantin, 41 years old: I bought Grant a year ago in the “Lux” configuration with a new dashboard. I'm 100% satisfied.
3.	Vitaly, 44 years old: I bought a Granta in 2022, the old instrument panel was good, but it was deformed after an accident, I replaced it with a new version from the “Lux” version. Identical in fastenings.
4.	Dmitry, 37 years old: during a side collision with Renault, the dashboard and dashboard were damaged. I didn’t upgrade to a luxury one, I bought my original one.
5.	Vladimir, 39 years old: he will buy Grant second-hand, he is happy with everything, the panel is good and informative. True, at night it is too bright, sometimes it strains the eyesight.
6.	Kirill, 45 years old: I work as a taxi driver, I drive all the time, I’m happy with the panel, it’s informative. The on-board computer quickly displays all the necessary data.
7.	Vladislav, 34 years old: after a major overhaul, friends recommended installing a new panel from the Luxury configuration, but he left the old one and is happy with everything.
Negative
1.	Vladlen, 44 years old: the old instrument panel is not very informative, often displays information and speedometer readings incorrectly. Installed from Lux configuration. Now there are no complaints.
2.	Sergey, 33 years old: after the accident, I replaced the front console, including the panel, since the old version was unfinished and damp.
3.	Vyacheslav, 39 years old: I drove the original device for a month and replaced it with a luxury version, it is much better and more informative.

approximate cost

It is impossible to name the exact cost of maintenance, since everything depends on the specific situation and the list of work performed, in addition to the regulated ones. And they will definitely be there.

According to the official AvtoVAZ website, the approximate prices are as follows:

For TO-0 1600 rubles for an 8-valve internal combustion engine. Other versions of TO-0 do not pass;
TO-1 will cost 5-6.5 thousand rubles;
TO-2 costs about 6-7.2 thousand rubles;
TO-3 from 5 to 6.5 thousand rubles;
TO-4 from 6 to 7.3 thousand;
TO-5 about 5-6.5 thousand;
TO-6 will cost 11.5-12.5 thousand rubles.

The exact cost can be found out after the diagnosis. The craftsmen will draw up a list of necessary work.

Compared to many other cars, maintenance for the Lada Granta is cheap. But even for such a car you have to pay money if the owner is interested in maintaining its technical condition at the proper level.