Acceptable parameters are indicated depending on the modification of the vehicle; the Lada Largus tire in this version is an exception. The operating manual indicates the only tire size for the Largus car for all trim levels - 185/65 R15.
Product size Lada Largus
Design parameters for Lada largus are designated as follows: 6Jx15, offset (ET) for R15 = ET50. The hub bolt pattern is 4×100. The Lada Largus car is adapted for the Russian market. The technical passport of the Largus foreign car indicates the same wheel size.
Many motorists set the standard wheel size to 185/65 R15. Another popular size of the same diameter is 195/65 R15. A few installed 205/60 R15 and 195/60 R15 tires on their cars.
Many motorists like to install large tires: 205/55 R16, 195/60 R16 and 195/55 R16.
R17 wheels: 205/50 R17, 205/45 R17, 225/45 R17 or 215/50 R17.
Exclusive sizes: 215/35 R18 and 215/40/18.
Compliance criteria for linear dimensions
Wheels with a diameter of 16 inches are standard by default for the Largus Cross when installed at the factory. And if the rim is damaged beyond repair, AvtoVAZ recommends replacing the damaged one with a disc that exactly matches the factory parameters: sixteen-inch, because the dimensions and shape of the wheel were designed for the safest and most trouble-free driving.
Not all motorists follow this rule. Many are guided by appearance and buy a more beautiful rim, not always taking into account its difference in diameter, width, etc. Let's take a closer look at the parameters that can or cannot be changed when installing a new disk.
Each manufacturer recommends certain wheel characteristics. They are indicated in the car’s passport data in the form of a formula. For example, this: 6J15PCD4-98et35DIA58.6, where 6J15 is the width and diameter of the rim in inches, the numbers 4 and 98 indicate, respectively, the number of bolt holes and the distance between the bolts in mm. Et - disc “overhang” (extrusion depth relative to the rim axis). This parameter can be either positive or negative, or zero. 58.6 is the diameter of the central hole in mm.
Purchasing a wheel other than the factory one in the above dimensions affects:
- quality of use of the vehicle chassis;
- suspension wear period;
- driving safety;
- risk of being denied warranty service.
The larger the rim diameter, the smaller the tire profile should be. The profile is also called the height of the tire. This is the vertical distance from where the wheel sits on the tire to the most protruding part of the tread. So this is what we get by increasing the rim. The wheel becomes lighter due to the reduction of the same tire profile, the car becomes more controllable, has better grip on the road, and, accordingly, becomes more stable.
But by increasing the diameter, you reduce the degree of passability of uneven areas, for example, when driving over rough terrain. And also due to the fact that there is less rubber between the rim and the road, it is easier to damage it. There is no point in reducing the profile from its rated value if you drive on poor-quality road surfaces.
The diameter of the center hole may be slightly larger than the diameter of the hub (the central part on which the disc is mounted). In this case, an additional adapter ring is used for installation and balancing.
If the diameter of the hole is smaller than the diameter of the hub, such a rim is not suitable: it simply cannot be secured.
DIY tire replacement rules
In order to save money, many car enthusiasts are thinking about replacing tires themselves. The process is not the easiest, but doable. To work, you will need a balloon, mounting blades, a jack and a compressor or pump. When performing the procedure, you should take into account some tricks, without which this event is doomed to failure.
Removing the tire from the rim
First you need to remove the wheel from the hub. Then it is laid on the ground so that the nipple nipple is at the top. All the air is released from the tube or tire, in the case of a tubeless tire, and the nipple nipple is recessed inside. You need to stand on the wheel with your feet so that the edge of the tire separates from the rim of the disc. Sometimes extra force may be required if the rubber sticks to the metal.
A mounting blade is inserted into the gap between the edge of the tire and the disk, then a second one. The main task is to turn the sidewall of the tire beyond the edge of the rim. If the wheel has a tube, it is pulled out through the resulting gap. If the tire is tubeless, you need to unscrew the entire side of the tire by the rim, then unscrew the second sidewall of the tire using the same edge of the rim and remove it from the rim.
Mounting a tire on a rim
Before installation, make sure that the tire is the correct size and has no defects. It is recommended to remove the balancing weights and the old nipple. When installing, you should take into account the markings on the tire, usually the direction of travel in the form of arrows.
To facilitate the installation task, you can apply a soap solution to the edge of the tire and the rim of the disk, but within reasonable limits, otherwise the tire will slip. Installation is carried out in the reverse order of removal. First, one edge of the tire is put on, after which the second one is wound on the rim.
Tire pressure and inflation
For wheels with a tube, everything is simple - you need to inflate the tube more than required in the manual (the pressure in Largus tires is no more than 2.1 atmospheres). This is necessary so that the tube sits evenly in the tire, after which you can deflate the air to the required values. For a tubeless tire the process is more complicated. When you try to inflate it, air will escape through the gap between the edge of the rim and the sidewalls of the tire.
You need to inflate any other wheel to 4 atmospheres. After this, remove the hose from the pump and put the end without a fitting on the nipple of the installed tire, the other end with a fitting is put on the inflated tire. Air under high pressure and at high speed will quickly fill an empty tire. This will be enough for it to sit tightly on the rim without having time to let air through the gaps. But it’s better to go to a tire shop, where this procedure will take a few minutes using special equipment. After the procedure, you will need to balance the wheels, which cannot be done in a garage without a machine.
Unlike all previous AvtoVAZ models, larger wheels are initially installed on Largus. This way, this model further emphasizes its relationship with other brands. Lada Largus is a joint product of AvtoVAZ and the Nissan-Renault concern.
Manufacturing methods and other factors
Linear parameters are not the only deciding factor. Some also choose to change the material the disc is made from. This is an important point - the material from which the purchased disc will be made, as well as the technology for its manufacture. The most popular types of discs found on sale are made of steel, aluminum, magnesium and titanium.
This series is arranged in ascending order of cost. At the same time, steel wheels are the heaviest, but flexible. Aluminum and magnesium alloys produce lightweight parts. This certainly significantly reduces fuel consumption. But such rims are quite easy to damage. But titanium gives the highest strength index. This is what you pay the most.
But for some drivers, it is not necessary to wait for damage to “change” the car. This applies to tuning enthusiasts. But here's what you need to know when choosing the color and appearance of a disc, which is made in different ways. There are stamped, cast and forged discs. So, manufacturing technology affects the ability to obtain a certain color and variety of styles. Stamped and forged wheels, due to the peculiarities of the technology, cannot be presented to customers in aesthetic diversity. But cast ones are easy. They are represented on the market in the largest number of positions.
The degree of damage and fuel consumption also depend on the method of manufacturing the disc. Stamped - they bend when hit, but do not crack. They can be restored. And due to the heavy weight of the car, gasoline costs increase. Another disadvantage is their susceptibility to corrosion, which cannot be said about cast products. But if the cast disc is cracked, it cannot be repaired. But the most expensive type of disc is forged. It is very difficult to deform, and it weighs little.
The manufacturer's recommendations also indicate what the optimal tire pressure should be. After all, it happens that when drivers change cars, out of habit they pump up the tire to one level, but it turns out to be either too low or too high. Both are bad. At a low level, the rubber on the disc is damaged, and at a high level, there is a high probability of breaking through the ramp or damaging the spool.
When choosing the optimal disc option, you should take into account many parameters that match the vehicle and do not forget about safety.
Standard wheel sizes for LADA Largus 1.6i B0
The LADA Largus 1.6i B0 model was produced from 2012 to 2019. Table of standard and suitable wheel sizes for LADA Largus 1.6i B0.
Disc drilling parameters are usually called bolt pattern:
- LZ (number of holes)
- PCD (hole center circle diameter)
- ET (disc offset)
- DIA (hole diameter)
Useful articles and reviews Announcements of certificate drawings among subscribers. Subscribe to VK group
| Make model modification Auto | Year of issue | Options | Disc width | Disc diameter | Bolt pattern LZ*PCD | Departure ET | Diameter DIA | type of instalation |
| LADA Largus 1.6i B0 | 2019 | 5.5Jx14 4/100 ET45 d60.1 | 5.5 | 14 | 4X100 | 45 | 60.1 | Factory |
| LADA Largus 1.6i B0 | 6Jx15 4/100 ET50 d60.1 | 6 | 15 | 4X100 | 50 | 60.1 | Factory | |
| LADA Largus 1.6i B0 | 6Jx16 4/100 ET50 d60.1 | 6 | 16 | 4X100 | 50 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 6.5Jx16 4/100 ET48 d60.1 | 6.5 | 16 | 4X100 | 48 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 2018 | 5.5Jx14 4/100 ET45 d60.1 | 5.5 | 14 | 4X100 | 45 | 60.1 | Factory |
| LADA Largus 1.6i B0 | 6Jx15 4/100 ET50 d60.1 | 6 | 15 | 4X100 | 50 | 60.1 | Factory | |
| LADA Largus 1.6i B0 | 6Jx16 4/100 ET50 d60.1 | 6 | 16 | 4X100 | 50 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 6.5Jx16 4/100 ET48 d60.1 | 6.5 | 16 | 4X100 | 48 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 2017 | 5.5Jx14 4/100 ET45 d60.1 | 5.5 | 14 | 4X100 | 45 | 60.1 | Factory |
| LADA Largus 1.6i B0 | 6Jx15 4/100 ET50 d60.1 | 6 | 15 | 4X100 | 50 | 60.1 | Factory | |
| LADA Largus 1.6i B0 | 6Jx16 4/100 ET50 d60.1 | 6 | 16 | 4X100 | 50 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 6.5Jx16 4/100 ET48 d60.1 | 6.5 | 16 | 4X100 | 48 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 2016 | 5.5Jx14 4/100 ET45 d60.1 | 5.5 | 14 | 4X100 | 45 | 60.1 | Factory |
| LADA Largus 1.6i B0 | 6Jx15 4/100 ET50 d60.1 | 6 | 15 | 4X100 | 50 | 60.1 | Factory | |
| LADA Largus 1.6i B0 | 6Jx16 4/100 ET50 d60.1 | 6 | 16 | 4X100 | 50 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 6.5Jx16 4/100 ET48 d60.1 | 6.5 | 16 | 4X100 | 48 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 2015 | 5.5Jx14 4/100 ET45 d60.1 | 5.5 | 14 | 4X100 | 45 | 60.1 | Factory |
| LADA Largus 1.6i B0 | 6Jx15 4/100 ET50 d60.1 | 6 | 15 | 4X100 | 50 | 60.1 | Factory | |
| LADA Largus 1.6i B0 | 6Jx16 4/100 ET50 d60.1 | 6 | 16 | 4X100 | 50 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 6.5Jx16 4/100 ET48 d60.1 | 6.5 | 16 | 4X100 | 48 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 2014 | 5.5Jx14 4/100 ET45 d60.1 | 5.5 | 14 | 4X100 | 45 | 60.1 | Factory |
| LADA Largus 1.6i B0 | 6Jx15 4/100 ET50 d60.1 | 6 | 15 | 4X100 | 50 | 60.1 | Factory | |
| LADA Largus 1.6i B0 | 6Jx16 4/100 ET50 d60.1 | 6 | 16 | 4X100 | 50 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 6.5Jx16 4/100 ET48 d60.1 | 6.5 | 16 | 4X100 | 48 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 2013 | 5.5Jx14 4/100 ET45 d60.1 | 5.5 | 14 | 4X100 | 45 | 60.1 | Factory |
| LADA Largus 1.6i B0 | 6Jx15 4/100 ET50 d60.1 | 6 | 15 | 4X100 | 50 | 60.1 | Factory | |
| LADA Largus 1.6i B0 | 6Jx16 4/100 ET50 d60.1 | 6 | 16 | 4X100 | 50 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 6.5Jx16 4/100 ET48 d60.1 | 6.5 | 16 | 4X100 | 48 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 2012 | 5.5Jx14 4/100 ET45 d60.1 | 5.5 | 14 | 4X100 | 45 | 60.1 | Factory |
| LADA Largus 1.6i B0 | 6Jx15 4/100 ET50 d60.1 | 6 | 15 | 4X100 | 50 | 60.1 | Factory | |
| LADA Largus 1.6i B0 | 6Jx16 4/100 ET50 d60.1 | 6 | 16 | 4X100 | 50 | 60.1 | Acceptable | |
| LADA Largus 1.6i B0 | 6.5Jx16 4/100 ET48 d60.1 | 6.5 | 16 | 4X100 | 48 | 60.1 | Acceptable |
Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.
Which disc is suitable for Lada Largus Cross
As you know, the prefix Cross in the name of the Lada model means that it is an off-road type vehicle. One of the most significant differences between the Cross version and its predecessor Lada Largus is the increased wheelbase. On a regular Largus, four 15-inch disks are installed by default. In Cross, the diameter was increased to 16. By the way, unlike many automakers who indicate possible variations in wheel diameters, AvtoVAZ clearly stated the only acceptable option for the wheel diameter.
Answers (5)
The budget station wagon Lada Largus is equipped with stamped rims with a radius of R15. Bolt pattern - 4x100 (like Renault Logan), offset ET 50, centering hole - CO 60.1, width - 6.0J.
15 / 6.0J PCD 4×100 ET 50 CO 60.1 and tires 185/65 R15
Is it possible to install winter tires on a Largus 15R 195 65, how will it affect the warranty and the chassis and transmission of the vehicle?
Can. but there is little space left between the wheel and the fender liner and ice will accumulate, which will irritate with characteristic sounds.
With the standard 185/65/15 wheel, the car will not drive right through the stove.
Will he really bury himself up to the stove? Bullshit.
Wheels for cars
Lada Largus is a station wagon with increased capability for transporting cargo. The car was released in 2011. The basis for the car was the Dacia Logan model, which is produced in Romania. "Largus" immediately became quite popular among car enthusiasts due to its increased capacity, low price and ease of maintenance.
Original alloy wheels "Lada Largus"
For any vehicle, wheels and tires are more than just a design element. It is on them that the behavior of the car on the road depends as much as possible. It is customary for all car manufacturers to indicate recommended dimensions for all their models. The AvtoVAZ concern is no exception.
However, it is not always and not among all manufacturers that it is customary to indicate the permissible dimensions and parameters of wheels. Often there are several options listed without specifying the minimum and maximum allowable ones. For example, in the official instruction manual for the Lada, the parameters of the wheels on the Largus are indicated in only two options:
- The usual model of the Largus station wagon should be equipped with products with a radius of R15.
- The all-terrain model "Largus Cross" is equipped with wheels size R16.
The AvtoVAZ concern does not recommend installing wheels of other sizes. Basically, they are replaced when the season changes, possible damage occurs, in which it is undesirable to use the product. In this case, replacing the disks with identical ones is explained by traffic safety.
Wheels for Lada Largus R15
Installing unsuitable wheels can affect the following characteristics:
- traffic safety;
- warranty conditions for the car, if the period has not yet expired;
- high-quality work of parts and suspension units;
- wear of chassis parts.
Since the car has become quite widespread on the roads of the country, there are many offers for the sale of wheels and tires for it. In the original configuration, the Largus is equipped with stamped wheels. In this case, many car enthusiasts are not satisfied with the appearance and characteristics of the car in motion. Then the stamped products are changed to cast or forged. Wheels on Largus size 15 are the only ones provided by the manufacturer, regardless of whether they are stamped or cast.
The Largus Cross model, even in the basic configuration, comes with installed cast parts.
Non-standard wheels instead of standard wheels
Sometimes owners have, for example, 14-inch stamped wheels left over from a previous car. Is it possible to install them on LADA Largus instead of the original “products”? Yes, but it will require loosening.
In such a situation, you may encounter the problem of aligning the disc with the brake caliper bracket. The fact is that the bracket sticks out in relation to the plane of contact of the disk to the hub. Moreover, if you tighten the fasteners of such a disk, it will subsequently not be able to rotate.
The same situation will happen if you install R15 wheels. They will rub against the same unfortunate bracket.
Only 16-inch ones will provide the required clearance.
If the discs have a small offset, then after installation they will provoke a change in the load applied to the wheel bearings. Also, protruding rims and tires will “throw” dirt onto the side panels of the body.
It is useful to know that a 6.5-inch disk with a 45 mm offset will touch body elements.
How to choose alloy wheels
For the Largus Cross car model, there are many different variations for installing wheel rims. They vary in manufacturing methods, shapes, cost and design.
The characteristics, price and controllability of the machine depend as much as possible on the method of production of the products. For Lada Largus Cross, wheels are made from the following materials:
- Steel. Conventional stamped products are made from it.
- Aluminum and magnesium. Cast or alloy wheels are made from these materials.
- Titanium. In combination with aluminum and magnesium it is a raw material for the production of forged products.
In this case, forged wheels have the minimum weight and maximum strength characteristics. They have long been known for their use in auto racing and have become widespread in the automotive industry. But the forging process does not allow creating a variety of shapes and textures, so such products are limited in design solutions.
Stamped steel wheels can take any shape. Their prices also please car owners. However, high weight and low characteristics negate all the advantages of this manufacturing method.
Casting is another matter. The process allows you to create products of any shape and texture. In terms of weight and strength, these products are slightly inferior to forged ones. But the ability to create a product of any size, width and shape quite cheaply makes these products extremely common on auto store shelves.
You can choose cast products for the Largus Cross machine from a wide range. Products from many brands of various colors, parameters and sizes are presented. The most famous companies Sparco, MOMO and Enkei are famous for their quality. You can choose cheaper products.
Dimensions and dimensions
and “Largus Cross” wheels only in sizes R15 and R16. Installation of products on 17 and 18 inches is possible. However, in this case the warranty will be lost. The comfort level on large wheels will also decrease.
For 15-inch wheels, 195/5 R15 tires are often used; sometimes you can find sizes 205/60 R15, 195/60 R15. Tuning enthusiasts most often install wheels of sizes 205/55 R16, 195/60 R16. Sometimes you can find large ones, such as R17: 215/50 R17, 205/50 R17, and a very rare option are the sizes 215/40 R18, 215/35 R18.
About summer tires for Largus 185 65 R15
According to car owners, a tire from Renault Logan 5.5×14/4×100 D60.1 ET43 is ideal, but the Lada Largus will need a tire size with parameters 185/70 R14. Factory-assembled 16-inch Largus Cross alloy wheels. They have unique parameters: width is 6 inches, drilling is 4x100, offset is ET50, CO is D60.1. The declared size of parts for the Lada Cross corresponds to 205/65 R16 tires. AvtoVAZ supplies Continental Premium Contact tires with a low profile (55% of the width).
The smaller the unsprung mass (this includes the mass of tires and wheels), the better the car will hold the road and accelerate faster. For example, if you install wheels that are 2 kg lighter each, then acceleration to 100 km/h will be reduced to 0.2 seconds.
Source kolesa.guru
This is not a problem, but it might be useful to someone. A question arose about the size of tires for the winter. On the site, many people write that 205/60/R16 fits without problems. Well, this size looks absolutely perfect on Largus Cross. Moreover, in my opinion, this size should be stock on the Cross from the factory.
Yesterday I tested tires especially for RUSTEM50. And unfortunately, I must note that there are problems (If you twist the steering wheel all the way and try to turn sharply, the rubber catches on the fender liner, not much, but there is a characteristic sound. Otherwise, jumping over the police and the comb have not yet noticed any problems. Now we have a thaw, but As soon as the snow porridge appears, I’ll test for frozen ice under the fender liners and report back.
Source www.drive2.ru
The size of tires and wheels not only adds style to the car, but also greatly influences the vehicle's performance on the road. Each manufacturer indicates acceptable standard sizes, and AvtoVAZ is no exception. In this review, we will look at the wheel size of the Lada Largus.
Usually, the manufacturer, depending on the modification of the car, indicates several acceptable wheel sizes, Lada Largus is an exception. The instruction manual indicates the only wheel size for all trim levels: 185/65R15 . Lada Largus wheel parameters: 6Jx15, offset (ET) for R15 = ET50. Wheel hub bolt pattern 4x100. Everyone knows that the Lada Largus is a 2006 Dacia Logan MCV adapted for the Russian market. The technical characteristics of the foreign car indicate exactly the same wheel size.
Based on reviews and surveys of Lada Largus car owners, we can summarize:
- The most popular tire size with a diameter of 14 inches turned out to be 185/70R14 , by the way, it is indicated in the table with tire pressure. Another less popular option is 165/80R14.
- The majority use the standard wheel size 185/65R15 . Another popular size of the same radius is 195/65R15 . A few installed 205/60R15 and 195/60R15 tires on their cars.
- Fans of larger wheels install tires: 205/55 R16 , 195/60 R16 and 195/55 R16.
- R17 wheels: 205/50R17 , 205/45R17, 225/45R17 or 215/50R17.
- Exclusive sizes: 215/35R18 and 215/40/18.
R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim in inches. The most popular wheel sizes are shown in bold.
When choosing wheels, you should take into account the full diameter of the wheel; it should not differ much from the standard one. Compatibility table:
Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.
Don't forget about the rim width:
Options
The AvtoVAZ concern added the Cross prefix to the model name for a reason. It is understood that the model has increased off-road capabilities.
The parameters of the basic wheel rims are as follows:
- drilling parameter is 4×100;
- wheel width - 7.0 J;
- disc offset is ET 40;
- centering hole size - 60.1.
Knowing all the various methods for producing wheel rims and their advantages, you can choose a set of quality products for Lada Largus. In order for the disc to fit perfectly, you also need to know the basic parameters and dimensions of the mounts.
Tires directly affect fuel consumption, vehicle cross-country ability, its behavior on the road, and noise level. The appearance of the vehicle also depends on the tires.
AvtoVAZ recommends a certain wheel size for Lada Largus. Let's consider the parameters allowed by the manufacturer and study possible variations. Let's get acquainted with the top 5 winter and summer tires (according to owner reviews).
ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"
Lada Largus is represented by three models (Largus R90, F90, Cross). Options with 7 or 5 seats are produced (except for the F90 cargo vehicle). The basic requirements for tires and wheels differ only for the Lada Largus CROSS. Parameters important when choosing wheels are indicated in the user manual. The recommended index of load capacity and speed, the standard air pressure are also set in the instructions.
| Model | Size, load capacity index | Center diameter wheel holes (DIA) | Radius between holes (PCD) | Number of nuts, pcs. | Wheel width, inches | Disc offset (ET) |
| R90 | 185/65R 15 88 H | 60,1 | 100 | 4 | 6J | 50 |
| F90 | 185/65R 15 92 H | 60,1 | 100 | 4 | 6J | 50 |
| CROSS | 205/55R 16 91 H | 60,1 | 100 | 4 | 6J | 50 |
Owners consider the categories of acceptable sizes. One of the reasons is the range of prices; manufacturers have better options among non-standard tires. Sometimes rubber remains from an old car. Some people think that the larger the wheel, the better. Let's learn how to choose safe wheels.
Buy wheels K&K Lada Largus-cross (KC703) 6J*R16 4*100 ET50 DIA60.15 Silver
The Sokoleso online wheel store recommends buying K&K Lada Largus-cross (KC703) 6J*R16 4*100 ET50 DIA60.15 Silver at a bargain price of 0 rub. in Yekaterinburg and Chelyabinsk. If you buy a set of 4 wheels K&K Lada Largus-cross (KC703) radius R16 of the K&K brand, delivery is provided to any area of Ekaterinburg, Chelyabinsk. There is a delivery of tires and wheels to the region. You can get all the necessary information about K&K Lada Largus-cross (KC703) wheels in size R16 in the Sverdlovsk and Chelyabinsk regions from our employees by phone or go to the delivery page.
What is the tire pressure
The tire pressure level is specified in the manufacturer's instructions.
| Model | Front tire pressure, kgf/cm² | Rear tire pressure, kgf/cm² |
| R90 | 2,4 | 2,6 |
| F90 | 2,4 | 3,0 |
| CROSS | 2,4 | 2,6 |
Constant monitoring of this parameter is necessary. Fluctuations to a lesser or greater extent affect the behavior of the car, efficiency, and driving safety. Let's look at the relationship more specifically.
Pressure higher than specified:
- the tire is harder, the comfort of movement decreases;
- the risk of damaging the wheel when hitting a stone or hole increases;
- grip on the road deteriorates;
- braking distance increases;
- the tread pattern wears unevenly;
- wheels rotate easier;
- machine stability improves.
Pressure below normal:
- fuel consumption increases;
- rubber wear increases (due to an increase in the contact patch area);
- car steering accuracy deteriorates;
- stability on the road surface decreases (due to changes in the angle of inclination);
- the risk of skidding increases.
What non-standard sizes can be supplied?
What wheels are suitable for the Largus fret?
Buy tires based on the full diameter of the wheel. It shouldn't be too different from the standard one.
Standard sizes allowed for installation.
| Model | Size, load capacity index | Center diameter wheel holes (DIA) | Radius between holes (PCD) | Number of nuts, pcs. | Wheel width, inches | Disc offset (ET) |
| R90 | 185/65R 15 88 H | 60,1 | 100 | 4 | 6J | 50 |
| F90 | 185/65R 15 92 H | 60,1 | 100 | 4 | 6J | 50 |
| CROSS | 205/55R 16 91 H | 60,1 | 100 | 4 | 5 ½, 6, 6 ½ J | 50 |
| Parameter | Increasing tire width | Increasing rim width |
| Keeping the car on the road | will improve | will improve |
| Accuracy of maintaining a given direction of movement | will improve | will improve |
| Road grip coefficient | will increase on dry roads | does not affect |
| Resistance to aquaplaning effect | will get worse | without changes |
| Traffic noise | will intensify | does not affect |
| Feelings when driving on rough roads | more comfortable | does not affect |
| Fuel consumption | will increase | will increase |
| Tire wear time | will speed up | without changes |
Be sure to calculate the load capacity index. Depending on the model, 88 (560 kg), 92 (630 kg) and 91 (615 kg) are allowed. The speed index is indicated next to the load capacity. T – up to 190 km/h, H – up to 210, V – up to 240.
An approximate formula will come in handy. Calculate the mass of the car, the weight of all possible passengers and cargo. Divide by 4 (wheels). Add a little extra.
Important! Installing large wheels can lead to incorrect operation of the ABS and electronic dynamic stabilization system of the vehicle. The lighter the tires and wheels, the faster the vehicle accelerates.
So, a car will accelerate to 100 km/h 0.2 seconds faster if the wheel weight is 2 kg less
The lighter the tires and wheels, the faster the vehicle accelerates. Thus, a car will accelerate to 100 km/h 0.2 seconds faster if the wheel weight is 2 kg less.
Frequency of checking tire pressure
The tightness of the wheel structure is not ideal. The air gradually comes out. The reduction in pressure directly depends on the air temperature.
Monitoring must be regular. It is optimal to check your blood pressure at least twice a week. Ideal when leaving a parking lot, visiting a gas station, or performing maintenance.
The measurement should be carried out before the tires heat up (for example in the morning) in all wheels, even in the spare wheel. Checking along the way will not give accurate indicators.
The pressure in the tire should be lower than in the other wheels.
Visual assessment of the condition of tires is an irresponsible attitude towards the vehicle and safety. There is a high risk of not noticing a slight decrease or increase in pressure (0.1-0.5 atmospheres).
It must be remembered that temperature fluctuations and vehicle loading lead to changes in the indicator.
In the following situations, it is recommended to reduce the atmosphere to a level lower than the factory instructions:
- when driving on a slippery road (in winter);
- for off-road driving.
Review of the best summer and winter tires
When choosing tires, owners take into account the following points:
- manufacturer;
- operating conditions (pay attention to the pattern, tread);
- size;
- price category.
Based on reviews from Lada Largus owners, let's summarize.
The majority of survey participants adhere to the recommended sizes. The most popular non-standard tires are 195/65 R15, 195/60 R15, 205/60 R15.
Top 5 summer tires:
- Nokian (HAKKA GREEN 2, Nordman SX);
- Michelin (Energy XM2);
- Continental (ContiPremiumContact 5);
- Matador (MP 44 Elite 3)
- Amtel (Planet T-301). Attention. Complaints about rapid wear. They can burst at high speed.
The tread pattern is:
- asymmetrical;
- directed;
- symmetrical (universal, therefore the most popular).
The latter is ideal for use around the city. It has an affordable price. The downside is unsatisfactory handling at high speed, on wet road surfaces, and when making sharp turns.
Top 5 winter tires:
- Nokian;
- Michelin;
- Continental;
- Goodyear;
- Gislaved/Hankook/Bridgestone.
It is recommended to install standard winter tires. Studded or non-studded - depends on personal preferences and operating conditions. The first option is more popular among Lada Largus owners.
The pattern and tread height are important. You shouldn't skimp on winter tires.
"All-season" is not the best option. They lose to seasonal tires in most respects. In winter, there is a high risk of getting into an accident on such tires.
Application. Table from the instructions.
