Everything with your own hands! — an honest story from Granta’s owner

Important point: gas pedal

VAZ does not equip all models of its products with an electronic version of the gas pedal. If it is not on your Lada Grant Sport, tuning will include replacing the mechanics with electronics. This pedal provides the control unit with the ability to more accurately and quickly respond to the driver’s actions. The dosing of the force developed by the engine becomes jewelry-precise. An additional positive point is more economical fuel consumption.

If your Lada has an electronic pedal, you may encounter another problem: insufficient response to pressing the accelerator. It indicates that the throttle valve is operating with some delay. The owners of the Lada Granta Sport car figured out how to solve the problem long ago: tuning should be supplemented with a booster - a device that amplifies the signal. Its installation is elementary and does not require any special knowledge or specific tools. The booster is installed between the electronic control unit and the accelerator within half an hour. When changing gears, the acceleration gap disappears and the car accelerates in a shorter period of time.

How to improve the motor and accelerator assembly?

Here chip tuning should come to the fore. The basic setting assumes that the electronic control module implements averaged and optimal engine operating parameters that are suitable for the vehicle's running-in process. The modernization procedure involves removing the microcircuit from the ECU and reconfiguring it. You should carry out this activity yourself only if you have certain knowledge and experience in the field of programming. For the average owner of a Lada Grant sedan, such a specific procedure as chip tuning is not available, so its implementation should be entrusted to experienced programmers from specialized studios. If you perform the firmware correctly, it is quite possible to achieve a power increase of 15-20%. An adjustment to the level of fuel consumption may also occur here. This parameter depends on the software version.

Another significant point that can provoke increased attention from the owner is the accelerator pedal. The standard setting of the unit is characterized by a “sluggish” response of the Lada Granta sedan engine to pressing the corresponding pedal

To achieve a sharp increase in speed, you will need to press the pedal deeper, but even here there are delays. This annoying feature can be minimized by tightening the damper cable drive and adjusting the camshaft.

pros

What are the positive aspects of the increase in the number of cars?

• There is a huge manufacturing industry involved in manufacturing, selling and servicing automobiles, which means that numerous jobs are created.
• The comfort of people's lives increases. It is much more convenient to drive your own car than to depend on public transport, stomping to stops in the morning in the cold or heat, in the rain or snow.
• Well, there’s one more plus, maybe dubious, but still. It consists in the fact that a large number of cars produced leads to a similar growth in transport on the secondary market (where used cars flock from owners who have decided to replace the “iron horse”). Second-hand prices are low, so people with average earnings can afford a used car.

It is difficult to argue with the ambiguity of the phrase “A car is not a luxury, but a means of transportation.” You now know who the author of the expression is. Ilf and Petrov probably had no idea that it would become winged. But in vain.

Important Details

As standard, the Lada Granta is equipped with steel engine protection, which reliably performs its duties. If you want to strengthen the engine protection, you can use it from Kalina. To protect the liftback body from impacts, dirt and abrasive wear, tuning experts recommend using wheel arch liners made of polymer materials. Fears that fender liners can disrupt ventilation in the body space are absolutely groundless. If you don’t drill the body yourself when installing pokers, they will only be useful.

Having decided to tune liftback wheels, 13-inch ones are successfully replaced with 15-inch ones, which are distinguished by a more neat appearance. The update can improve the movement of Grants on uneven domestic roads. You can risk installing 16 or even 17-inch wheels, but this option is only suitable for traveling on good roads.

Write to us if the article was useful.

Social character of personality

The concept of social character was introduced into science by E. Fromm.

Social character of personality

is a set of traits that arises in people belonging to the same social group. Moreover, these special features appeared under the influence of common experiences and an identical lifestyle.

The psychologist has developed two types of social characters: unfruitful and fruitful.

Unfruitful

These types are called unfruitful because they are “takers”, believing that they can only receive benefits from the outside.

Fruitful type

This is a kind of humanistic ideal to which we need to strive. It is characterized by: reliance on one’s own strengths and their use both to receive benefits and to give to other people. A fruitful social character gives and does not receive; it is based on love, the highest degree of which is maternal love, which does not know selfishness.

Basic engine upgrade

Of course, you should not interfere with the operation of the power unit immediately after purchasing a car. After running in, you can set the “zero” (zero resistance filter). As a result, 3-6% more oxygen will enter the combustion chambers, which will have a positive effect on engine power.

Another useful step is to use a modified exhaust system. On the market you can find an exhaust manifold with larger diameter pipes, which reduces the resistance to the movement of gases in the exhaust system. The look can be completed with a beautiful coating on the exhaust pipe.

Chip tuning of the Lada Granta liftback will help you optimize engine parameters. This refinement option helps you select settings that suit a particular person's driving style. As a rule, power always increases.

The car can also be equipped with an electronic accelerator pedal. It allows you to control the engine's response to pedal pressure as accurately as possible. This, in turn, helps save fuel. New versions of these pedals are equipped with a separate control module that allows the driver to select one of several operating modes.

If you decide to carry out a more serious modernization of the Lada Granta Liftback engine, we recommend installing a turbocharger, a forged piston assembly and cylinder boring. Experts recommend taking comprehensive measures, since installing the turbine itself can damage the pistons under heavy loads. And forged elements of the piston assembly are simply useless to install without increasing the performance of the fuel system.

Tuning Lada Granta: options for changing the appearance and interior

Tuning of the Lada Granta sedan car is more extensive than that of liftback or station wagon models. It is divided into external and internal. You can carry out tuning work both in the workshop and at home, with your own hands. Let's look at all possible variations for improving the Lada Granta car.

Sedan body

The first thing many people want to change is the body color, since you can only choose it at the time of purchase at a car dealership. When buying a used car, the color does not always satisfy the owner’s wishes, and repainting does not always have enough money to solve this problem. So, there is a way to change the color of your “iron horse”, much cheaper. This method is called film.

Such tuning is available to almost every owner of a Lada Granta car, thanks to its relatively low cost. Working with such material can cause some difficulties, especially in places where the body bends. But, if you do everything carefully and slowly, then everything will work out great.

Changing color with film

The color of the film can be completely different, and in addition, it can have a mirror or matte effect.

After the body color of the Lada Granta sedan has been changed, you can proceed to other external tuning details. For example, body kits are very often used. Bumpers, sills, overhead wheel arches can be of absolutely any shape and design. They have standard attachments to the body, and when it comes to choosing a shape, your imagination has no limits.

Some “Kulibins”, in addition to low body kits, also make suspension tuning, lowering it by several centimeters. Of course, such an appearance is not for everyone, but no one will like the comfort of riding on such a suspension.

Also, a Lada Granta in a sedan body, due to the shape of its trunk, can have such a detail as a spoiler. Since it is installed on the trunk lid, it can have any shape, and at the same time, it will not interfere with the functioning of this element.

And finally, you can do wheel tuning by installing titanium wheels on your Lada Granta car, even with a slightly larger diameter, if provided by the factory. And in addition to them, install new mirrors, as well as air intakes on the roof or hood. The appearance of your swallow will change significantly.

Liftback body

Tuning the Lada Granta, in a liftback body, is practically not multifaceted. This is explained by the fact that the developers of this Lada Granta have already installed a rather nice sports body kit on the liftback, in the standard version.

Body kits for the Liftback model

There are no restrictions regarding painting, just like on the sedan body. Otherwise, tuning can be without restrictions, but the question only arises: is it needed on the Lada Granta liftback?

Station wagon

This type of body, unlike the sedan and liftback, does not have a horizontal trunk lid, therefore, it will not be possible to install the spoiler you like on such a Lada Granta car. For him, there are only a few types of spoilers that are suitable for mounting. Therefore, many simply do not install it at all.

Otherwise, the tuning is similar to previous Lada Granta body types, from painting to new low-slung wheels.

Interior tuning

The Lada Granta salon, regardless of whether it is a sedan, station wagon, or liftback, has the same opportunities for tuning. Moreover, like body improvements, all robots can be carried out with your own hands.

Let's start with the dashboard. The Lada Granta car already has the following installed from the factory: radio, on-board computer, all the necessary sensors and buttons, etc.

Therefore, most owners only change the coating of this part. The same thing happens with door panels, trim, and seats.

Sometimes, there are cases when Lada Granta car owners change the standard steering wheel to a sportier, square one.

Tuning the interior of LADA GRANTA

Of course, if we take it by and large, you can completely replace all the interior parts, but this will be a very large and labor-intensive job, which obviously cannot be done with your own hands, and you will definitely need the help of specialists and quite a lot of money.

Bottom line

In principle, all Grant tuning can be the same, whether for a sedan body or for a liftback or station wagon. There is a difference, literally in one or two parts, which can be installed on a sedan, but impossible on a station wagon, and so on.

In general, if you have the means, desire, and a large amount of money, then you can also use your imagination, and then tuning your iron friend will simply know no bounds.

Rear head restraints for Grant

When tuning lighting and other elements of the car, do not forget about comfort. Therefore, tuning the Granta seats will not be superfluous. It is about improving this part of the interior of the Lada Granta that it is worth talking in more detail.

Some Grant models are equipped with head restraints at the factory. Other cars are deprived of this privilege. If you are the owner of just such a car, do not be upset. On the contrary, this will be a reason to install these parts yourself, and at the same time an opportunity to get to know your car better.

Before tuning the car interior with your own hands, you need to purchase a set of head restraints for Granta. They are available in almost all auto stores in the country.

We will also need the following tools:

• drill with drill number 6;
• key No. 10;
• marker (not black);
• screwdriver;
• sharp knife.

The first thing to do is remove the seat backs. To do this, you should carefully remove the upholstery and unzip the zipper. Next, unscrew it with a screwdriver and pull out all the plastic components and locking buttons that are located in the seat backs. After this, you need to find the centers of the colored inserts on the upholstery and mark them with a marker.

Then we attach the head restraints with brackets to the seat backs, marking the places where the head restraints will be installed. After this, we drill holes in the pipes of the latter, attach the brackets to the seats, and tighten the fasteners with a wrench. Next, use a sharp knife to make small cuts, in place of which we install the headrest fungi. At the final stage, carefully assemble the seats in the reverse order.

It is worth noting that headrests will not only add comfort to your Granta. Thanks to this tuning of the car interior, you can store things on the rear parcel shelf of the car and not worry about them falling on the heads of passengers.

All these improvements for the Lada Grant are designed to make operating the car more comfortable. They make driving much more enjoyable.

Exterior change

Do-it-yourself modification of the Lada Grant can begin with modifying the appearance of the car and modernizing its aerodynamic characteristics. Installing a front bumper with a modernized water intake makes it possible to provide better airflow to the brake system and power unit.

Also included in the tuning section of the model in question is the conversion of turn signals to be compatible with side lights. To work you will need a soldering iron, wires, LEDs and insulating material. A standard lamp with two contacts is changed to an analog version with three terminals by laying wiring from the dimensions to the base.

The connection diagram looks like this:

• The contact is connected to the common ground;
• In addition, through 12 V it is in contact with the dimensions (5 V) and turn signals (25 V);
• As a result, when the dimensions are activated, a lower-power filament will light up, and the turning on of the direction indicators is accompanied by the lighting of more powerful lamp filaments.

One of the conditions for the long-term service of a car is caring for its body. One of the methods that can prolong its operation is polishing. The coating prevents the formation of corrosion and refreshes the overall appearance of the machine. The car should be polished in a dry garage or outside in consistently warm, but not hot, weather.

After washing and drying the vehicle, it is necessary to apply polish to the body and, using slow movements using a machine and a special nozzle, rub the product into the body at medium speed.

To perform this type of work at home, you will need the following tools and equipment:

• Polishing machine and corresponding attachments;
• Polish;
• Water.

Wax finish is the cheapest, but requires updating after 2-3 months. Teflon polish is an analogue of the previous variation. Makes the color of the car more saturated. Withstands up to 7-8 washes without loss of effect. The best options are epoxy and varnish treatments, which have high performance and do not require updating for 6-9 months.

Secrets of suspension tuning

The chassis of the Lada Grant sedan can be subjected to such a thing as do-it-yourself tuning without much difficulty. Initially, the suspension design assumes driving characteristics aimed at achieving softness and comfort. This aspect will show its best side on a good quality road surface. But in reality the situation is different, and therefore the suspension of the Lada Grant sedan requires modifications.

The actions are not intricate in nature, but consist of cutting one turn on each of the springs. The resulting rigidity can provide the car with previously missing stability. You can also replace the front shock absorber struts with those elements from Kalina. Due to the shorter length of the borrowed struts, they will ensure a low landing for the improved LADA Granta sedan.

Design features of car headlights

Today, the most popular type of optics tuning is the installation of bi-xenon lenses. They not only improve the light of the headlights, but also give the car a completely different look. In this article we will look at the process of installing bi-xenon lenses yourself using the example of a Daewoo Lanos car.

It was not for nothing that Lanos was chosen as an example. The fact is that lenses cannot be installed in any headlights, but only in those whose glass does not have a pronounced diffuser. Take, for example, the standard headlight of a VAZ 2107. Its glass on the back side is covered with special “ribs”, which are designed to diffuse the light of the lamp so that it does not blind drivers of oncoming cars. The same situation applies to other VAZ models. No, you can install lenses on both the Zhiguli and the Samara, but for this you will have to buy other headlights. Otherwise, you will not achieve the desired effect.

On the inner surface of the standard VAZ 2107 headlight there are special “ribs” that scatter light

But the Lanos has headlights like those of foreign cars - they also have a lens, but the glass in the center is almost smooth. In addition, it is not glass at all, but a special heat- and shock-resistant plastic.

The headlights of the Lanos have almost smooth glass in the center

In all other respects, the Lanos headlights are no different from the headlights of other cars. Their design consists of:

• housings with holder;
• diffuser (glass);
• light sources (lamps);
• reflector (reflector);
• electrical connectors and wires.

There are three lamps in the Lanos headlight:

• side lights;
• head light;
• direction indicator.

The main lamp of the Lanos headlight is double-filament, i.e., when switching the “low/high” modes, one specific filament works. The light emitted by the lamp is not focused by anything here, but is simply “collected” by the reflector and directed forward.

The Lanos headlight lamp has a two-filament design

Exterior modernization Grants FL

Most tuning experts recommend starting improvements with the appearance of the car. Although the new Granta in 1818 underwent some face lifting, there are still a lot of places in the exterior that require improvement.

It is worth saying that the front part of the new Grant is made quite well. The X-shaped style looks amazing.

Minimal improvements

First of all, Granta owners advise installing a mesh on the radiator grille. This mesh is designed to protect the radiator of the car’s cooling system from any road surprises. For example, small stones or insects.

It is imperative to carry out anti-corrosion work. Unless, of course, they are made. Anti-corrosion coatings are designed to protect the vehicle body from irritating rust. Thanks to the anticorrosive treatment, the car will delight its owner for many years to come.

It is worth noting that to carry out anti-corrosion work, you should contact a service station. At an official dealer, this service costs several times more.

Some areas of the car also need to be covered with a special protective film. This film will protect the car from sandblasting, chips and scratches, which increase the risk of corrosion.

Exterior styling

To improve the appearance of the car, you can also install new bumpers. Fortunately, such parts are a dime a dozen on the market. It will not be difficult to choose the details to your taste. With modified bumpers, the Lada Granta is significantly transformed. For example, like the car shown in the photo.

To further decorate the exterior, you can add car door moldings. True, on some trim levels the moldings are installed initially. Door moldings are not only visually attractive, but also practical. Quite often a situation occurs when a neighbor opens the doors too wide in a parking lot. Installed moldings prevent any minor mechanical damage.

In addition to new bumpers and body kits, you can add spoilers and decorative covers for headlights, side mirrors, and handles to the car’s exterior. These decorative elements will make the vehicle attractive and recognizable.

Regarding the car's lighting technology, it is still better to install more advanced optics. The original lighting technology is certainly good, but LED optics are still better. In addition, more advanced optics will make travel safer.

Film tinting

First, let's decide on a suitable shade. Automotive stores offer a wide selection of this product. You will definitely need: a stationery knife, a spray bottle, an electric hair dryer, an alcohol solution (one hundred grams of pure alcohol for half a liter of water), a flexible scraper with a felt pad. We wash the headlight, wipe it with alcohol, and measure. Cut out the film with an overlap.

We treat with a water-alcohol solution using a spray bottle, direct the hair dryer and apply the film. Smooth the surface with a squeegee, expelling any remaining liquid and air. Cut off the excess part with a knife. The film will protect the surface from scratches, damage and decorate the appearance of the car. With minimal effort, you will get beautiful headlights with anti-gravel function.

Additional recommendations

Already in the base, each Lada Granta is equipped with metal protection for the power unit. Of course, this option also provides some protection, but it is much better to buy a higher quality part. The liftback's impressive ground clearance will not help avoid damage as a result of overcoming road obstacles. Owner reviews show that in this case, liftback tuning is carried out using the appropriate spare parts from the Lada Kalina model.

Don't forget to install fender liners (aka "lockers"). They will provide reliable protection of the body from dirt and moisture, which will significantly facilitate the fight against corrosion processes. Some motorists think that fender liners prevent normal ventilation of the body space, as a result of which the metal begins to rust literally before our eyes. But in reality, it all depends on the quality of the locker installation. If you do everything correctly and don’t check the body again, you will only get benefits.

The basic equipment of the car includes 14-inch steel wheels, which spoil the whole picture. And the body on them looks very “heavy”. The problem can be solved by installing wheels with a diameter of 15 inches. And it will be much easier to overcome obstacles on the road. In some cases, tuners even use 16- and 17-inch rims. True, you will have to fork out for low-profile tires. This Lada Granta tuning option is only relevant for residents of megacities with good roads.

External mirrors with heating and electric adjustment - this will not surprise anyone, so they should be installed by default. The heating activation is connected to the heated rear window button, so this function will not require further attention.

Tinting is an integral attribute of a modernized car. However, do not forget that the film should not be used on headlights, because this directly affects the safety of the car. If you decide to tint your rear lights, we recommend that you read our recommendations.

Technical nuances of tuning Grants

However, there is a certain audience that will choose the Lada Granta. Do-it-yourself modifications will not stand in the way of those who have been fans of the brand for many years or for those who simply do not yet have the money for a more advanced car. We are not inclined to think that instant technical tuning of a new car can bring any positive results. The car must be run in and get used to both the owner and the conditions, and after that it can be modified as necessary.

If we talk about the Granta engine, then there is no need to isolate it. Absolutely the entire AvtoVAZ model range uses engines of a similar design, originally from the twentieth century, and they, naturally, require modifications. It is useless to want enormous power from the imperfect engines of Tolyatti small cars. All we can do is make life easier for the engine, and it, in turn, will give us several horsepower, noticeable, however, only on bench measurements.

Do-it-yourself tuning of the Lada Granta interior: instrument panel

As practice shows, the vast majority of Lada Granta owners are not satisfied with such an element of the car interior as the instrument panel. Namely, the color and intensity of its illumination. Many car owners turn to specialized auto repair shops for help, but it is quite possible to improve this part yourself. The main thing that is required for this is experience in working with a soldering iron and desoldering pump. Let's look at this tuning in more detail.

Based on this, tuning the Granta instrument panel will differ from the improvement of previous VAZ models.

Before tuning this part in a Lada with your own hands, you need to disassemble it. To do this, you need to bend the plastic clips located around the entire perimeter of the instrument panel. Next, remove the back cover. The latter is easy to reach by pulling up the special arrows. After removing the cover we will see the Granta instrument panel board. We take it out and proceed to the display. It may be soldered to the panel and you will need to use a desoldering pump to remove it. After soldering, the display antennae should move freely in the landing areas. After dismantling the display, we get access to all the LEDs on the Lada panel.

Next, you need to insert your own LEDs instead of the factory ones, and then immediately check the serviceability of the entire instrument panel. If all lights work, then you can begin reassembly.

When assembling the instrument panel, special attention should be paid to the location of the display antennae. They must fit into their seats as accurately as possible. Otherwise the system will stop working

Upon completion of assembly, it is worth treating the cover of the Granta shield with Anti-creak cream

Otherwise the system will stop working. Upon completion of assembly, it is worth treating the cover of the Granta shield with Anti-creak cream.

"Deep" tuning

True engine boost enthusiasts can go much further in their pursuits. Among the most popular measures:

• installation of forged pistons;
• cylinder boring;
• installation of a nitrogen accelerator;
• turbocharged engine.

If you intend to strengthen the engine of your Granta Sport in this way, it is better to carry out tuning in a comprehensive manner. Installing a forged group is pointless without intensifying the fuel supply, and turbocharging accelerates the wear of serial pistons. And do not forget that increased “sporty” engine power requires intervention in other car systems. It will be necessary to strengthen the brakes, modify the suspension, and make changes to the transmission. Without these procedures, you will not be able to enjoy the speed of your fret for long.

Refinement of the power plant

The serial engine of the car was manufactured taking into account movement in the city and on the highway in compliance with traffic rules.

However, tuning for the Lada Granta liftback 2022 means not only a beautiful appearance.

Refinement of the engine and associated equipment is fraught with low results in the case of infusion of a small amount of funds, or an unusually high cost. Therefore, before you undertake the modernization of the internal combustion engine, you will need to perform several calculations.

1. What power increase does the user want to get at the output?
2. Will the suspension, chassis and transmission handle the increase in horsepower? And as a result, what will need to be completed to equalize the characteristics of the car.

A preliminary assessment is necessary due to erroneous tuning by beginners. Many car enthusiasts know that if you install a turbine on an engine, its performance will increase significantly. This increases the load on the piston group, cooling system, brakes, and transmission.

To obtain a 60-100% increase in power, the power plant will need to perform a number of modifications.

1. Completely disassemble the power plant and inspect it. Engine strengthening is carried out only if all components of the machine are in full working order, otherwise the risk of breakdowns increases.
2. Boring of cylinders and selection of a new piston.
3. Installation of a turbine and a more efficient cooling system. If you plan to increase engine power by more than 100%, it will also not be superfluous to install an oil cooler.
4. Reflashing the ECU or installing a new module. On the Lada Granta Liftback fl tuning the brain part is quite simple due to the large number of possible firmware and open source code.
5. Installation of an overcooked exhaust manifold, exhaust system and direct-flow type muffler.
6. Strengthening suspension and brakes. With increased power, the car will drive faster. Standard brakes can quickly overheat - a negative process that greatly reduces the performance of the calipers. There is also a risk of the car rocking on uneven surfaces due to the overly soft suspension. Therefore, tight struts, stiff springs and lowering the ground clearance are a necessary measure, unless the car is planned to be used on a dirt road (here a completely different set of parts will be required).
7. It is also recommended not to disdain the installation of additional body elements. Increasing the rigidity of the load-bearing part of the car will increase cornering stability.
8. At the same time, shock absorbers and struts are changed. This will allow you to tolerate increased speed normally.
9. Additional measuring instruments such as pressure in the turbine and others are displayed in the cabin - this will help to accurately monitor the processes occurring in the racing engine.

If the modification of the power plant is carried out by a competent specialist, if the power is increased by 50%, you will have to spend an amount equivalent to a third of the cost of the car. At the same time, increasing the performance of the internal combustion engine for every subsequent 10% will be disproportionately expensive, but if there is a desire, everything is possible.

Lens installation

It is recommended to wear gloves when installing the lens into the headlights. This is necessary so as not to stain the lenses with dust or other dirt. The mask or body is removed from the packaging. They also take out a silicone adapter and a lens, which are inserted into the mask. They are then fastened with the supplied screws. This design is mounted in the optics housing. On the reverse side, the assembly is screwed with a contact nut. When replacing lenses in headlights, you can also use these instructions.

The decorative lighting ignition unit is glued to the optics body using double-sided tape. Next, the lamps are mounted in the lenses. All wiring is routed outside the housing. Sealant is placed in a special groove on the body, the glass is heated and glued.

If the connection between the glass and the flashlight body is unsealed or the connection is poor, the lens may sweat. This problem cannot be solved by replacing the lenses in the headlights. You need to disassemble the optics and eliminate the cracks or re-glue the glass. It is recommended to use alcohol and soft, lint-free cloths to clean the lens. After cleaning the headlight, it is better to additionally blow out the inside of the housing with a compressor to remove dust.

Interior modernization

For the Lada Granta, liftback interior tuning is designed to improve the interior space of the car. The simplest upgrade option would be to replace the seats or purchase covers. By painting individual elements of the panel or dashboard, you will be able to highlight this part of the car. This kind of work is easy to do with your own hands; just study the instructions for dismantling the plastic elements.

Interior lighting will not only look original, but will also significantly improve interior visibility. LED strips glued to Granta's thresholds make boarding/disembarking much easier. When starting work, a plan is initially drawn up for dismantling and assembling the panels, as well as connecting the lamps. Considering that the owners of this model noted poor sound insulation, you will have to work on it yourself.

For those who like to travel to the music, making a mobile disco out of a car is not difficult. The dimensions of the liftback trunk and interior allow the installation of the most sophisticated equipment. Installing huge speakers is too expensive, but worth it. Having seriously worked on the drive and suspension, you can build a racing car from a Lada Granta. And massive wheel arches will add style to your car.

First level tuning

Before you start tuning the liftback grants, you should not immediately begin to chop up the hood filling. The first thing you should do is give the car a month, run it in properly and find out for yourself its behavior, driving dynamics, and, perhaps, identify structural factory defects that tuning will correct.

In any case, here are some innovations you can add to your car at first:

1. Installing a new air filter. By installing a zero-resistance air filter, you can add the amount of oxygen that enters the internal combustion chambers. Increasing the amount of oxygen will, in turn, increase engine power.
2. The increase in engine power will also be affected by replacing the exhaust manifold. The factory manifold is efficient, but installing a more balanced analogue will improve the results.
3. If during the run-in it was decided to carry out a complete engine upgrade, then it is better that it be carried out as a whole. Installing the forged parts and adding the turbo must be done at the same time in order for the engine to really start running better.

Basics of mechanical tuning

The Lada Granta, which comes off the manufacturer's production line, has shortcomings and these little things can already be replaced after the first run-in of the car. The accelerator pedal responds weakly, traction at the bottom behaves indirectly, the car itself switches to powerful mode only after the driver presses the pedal all the way. Drivers want to get power out earlier. The power drops significantly even after turning on the air conditioner. This problem is solved after minor changes at a high degree of engine boost. Changes are being made to the intake and exhaust elements, the ShPG parts are replaced, the camshaft is reconfigured and the engine displacement is significantly increased. In the workshop, first of all, the engine controller is reconfigured, which corrects the original industrial firmware of the car. Tuning allows you to reduce fuel consumption, increase efficiency and power delivered to the car in the initial stages, as well as improve torque.

Exterior tuning

External tuning of the Lada Granta liftback involves replacing the wings and other body elements. Instead of the factory metal fenders, you can install more attractive parts made of suitable plastic. By the way, this will help you forget about the problem of corrosion. Many studios offer ready-made sets of bumpers, fenders and radiator grilles. Purchasing and installing a similar body kit for a Granta in a liftback body will help make the car truly unique.

Installing a front bumper with a larger air intake will not only help improve the appearance of the car, but will also contribute to more efficient airflow to the engine and front brakes. And this is a very important factor that should be taken into account after tuning the Granta power unit.

An equally popular solution is to improve the optics of the Lada Granta. For example, some car owners decided to install eyelashes on their headlights. You can also look for ready-made kits of modernized lighting equipment.

In fact, the design of the Lada Granta liftback already in the base looks quite acceptable. The shape of the version in this body style looks much more interesting compared to the four-door. For this reason, car owners very often do not make significant adjustments to the appearance of the Grant. In this case, tuning a Granta in a liftback body may involve installing a compact rear spoiler, which should be placed on the cargo compartment lid.

This small element will help optimize the aerodynamic performance of the rear of the car and protect the rear window from dirt. At the same time, the spoiler is harmoniously combined with the factory body elements of the car, so even fans of original cars will like it.

The practicality of the car can be improved by installing roof rails tailored to the characteristics of the new body. To install these tuning elements, there is no need to make holes in the roof. The roof rails are mounted in places intended for installing the trunk. There are black and silver elements on sale.

Where to begin

Deep tuning of the new Lada Granta sedan should not be started before the end of the warranty period - this may result in refusal of free service. When purchasing a car ex-showroom, experienced craftsmen recommend using only external modifications that are decorative in nature. If the warranty does not matter, you can begin to modernize the engine and chassis.

Experienced experts recommend modifying cars that are in good technical condition. Therefore, before making any modifications, you will need to get the car in order.

External tuning of Lada Granta FL sedan

Often, the factory settings of the suspension and power plant are sufficient for the user. Car enthusiasts want to modernize the exterior parts of the body, decorative trim, and interior panels. The degree and depth of modification depends on the financial capabilities and imagination of the car owner.

Body panels

If you have no experience in self-modification, you should start with exterior decoration.

Installing tuning bumpers, door sills, mirrors, and designer wheels allows you to transform your car relatively inexpensively and quickly. Some connoisseurs prefer to install additional elements in the interior, or change the factory ones.

Typically the body tuning procedure looks like this.

1. The store selects the required part.
2. Buy paint of the required color. Typically, retrofit body panels are supplied to the market coated with a primer.
3. The car is washed thoroughly - it is recommended to use car shampoo or special soap. Particles of dust and dirt can prevent the repair from being carried out efficiently.
4. The car is driven into a well-lit garage, where the repair process takes place.
5. Next, the factory parts are removed and new ones are installed in their place.
6. The car is painted and polished.

Next comes the alteration of the interior, dashboard, door cards, and steering wheel.

Some car enthusiasts cover the panels with Alcantara, change the upholstery of the seats, or even install racing buckets.

Shumka

The next step is for motorists to enhance the factory sound insulation. Factory panels are designed to partially dampen vibration and absorb noise.

To properly “roll up” the car you will need to spend a lot of money. The panels are glued in two layers (the simplest method).

1. Bitumen sheets. If the car will not compete in competitions, it is enough to use 2-3 mm bitumen. The sheets are cut to size and rolled onto the metal surface with a roller.
2. Tuning of the Lada Granta fl sedan continues at the stage of installation of soundproofing slabs (splen). The sheets are rolled on top of the vibration insulation. Typically, users choose a layer thickness of no more than 10 mm.

If desired, you can use thicker panels, which will only improve the result.

Some craftsmen advise first reading the literature on exactly how and in what places insulating material should be applied. If you don’t have enough experience, you can make a lot of mistakes that reduce efficiency.

Photos will tell you what a similar tuning of the Lada Granta sedan looks like.

Acoustics

A separate category is the modernization of the car’s acoustic system. The factory setting is only suitable for listening to the radio in a traffic jam, not music at full volume.

The main requirement when installing more productive music in a car is the competent selection of noise insulation and vibration-absorbing layer

You should also decide what is important – volume or quality

Additionally, you should consult with specialists. It often turns out to be possible to build high-quality acoustics for reasonable money. The main thing is knowledge of the compatibility of individual blocks and experience in their installation.

First you need to make some noise:

Only then mount all the elements tightly.

It is also recommended to connect a technician after installation to calibrate the player and speakers.

Chip tuning of Nissan Navara SUV

Every car owner wants his “favorite” to be unique and one of a kind. Tuning the Nissan Navara is designed to make the dreams of all owners of this SUV brand come true. If the changes made concern the appearance of the car (body kit, airbrushing, interior reupholstery, lighting solutions, tuning of car wheels), then they are more often called styling.

1 What is “brain firming”

The Nissan Navara is a pickup truck designed primarily for off-road use, which is why the Navara's tuning is appropriate:

• specific protective body kit;
• KUNG;
• engine crankcase and gearbox protection;
• suspension lift;
• front and rear winches;
• additional lighting devices, etc.

Tuning Nissan Navara

Navara engine tuning requires special consideration.

The ECU (electronic engine control unit) is responsible for the optimal operation of the Nissan Navara engine. This device is often called the controller or the “brains” of the engine.

The modern Nissan engine is equipped with many sensors, information from which is sent to the electronic control unit. He, in turn, based on the received information, makes adjustments to the operation of the engine systems.

Changes made to the operation of this unit at the software level are called chip tuning or “brain firmware”.

2 What does chip tuning give to Nissan Navara?

Today, you can find a Nissan Navara SUV on sale, equipped with two types of diesel power units.

YD25 Kai3:

• four-cylinder, in-line;
• 4 valves per cylinder;
• DOHC gas distribution system;
• variable geometry turbocharging and intercooling;
• ECM control system;
• volume - 2488 cm3;
• fuel supply - direct injection + Common Rail;
• exhaust gas recirculation (EGR) system and catalytic converter;
• maximum engine power, kW (hp)/rev. min - 140(190)/4000;
• maximum torque, Nm/rev. min - 450/2000.

Nissan diesel power unit

V9X diesel unit:

• six-cylinder V-shaped (65°);
• 4 valves per cylinder;
• turbocharging with intercooling;
• ECM control system;
• volume - 2993 cm3;
• fuel supply - Common Rail + multipoint injection;
• exhaust gas recirculation (EGR) system and catalytic converter;
• maximum engine power, kW (hp)/rev. min - 170(231)/3750;
• maximum torque, Nm/rev. min - 550/1750.

Chip tuning for Nissan Navara allows you to remove the maximum speed limit and optimize the operation of the turbine. Thanks to a little modification, you can get rid of the “turbo pit” phenomenon.

In addition, tuning the car makes it possible to increase power and torque (within the limits set by the manufacturer) and stabilize the engine in idle mode.

The result is a reduction in fuel consumption.

Engine chip tuning

During chip tuning, the security systems installed by the manufacturer remain active. The engine load limit is not exceeded.

The Nissan Navara exhaust system is equipped with a particulate filter. Physical removal of this element requires mandatory reprogramming of the engine control unit.

3 Chip tuning box

In the engine modification market they offer the installation of a tuning box. This proposal is especially attractive because such installation can often be done independently. The tuning box connects to the pressure sensor and lowers its readings. Before installing the box, Nissan Navara owners need to take into account that such a modification is not capable of:

• limit the maximum engine torque;
• remove the maximum speed limit;
• turn off the particulate filter;
• control the operation of the turbine;
• turn off the EGR system.

To maintain the factory warranty on the Nissan Navara, it is necessary to carry out licensed chip tuning.

The software for the control unit in these cases was developed by the manufacturer's engineers. Such services are provided by official Nissan dealers.

Read our news first - add “365NEWS” to your favorite sources

Filters and exhaust system

And first of all, this is the installation of high-quality and expensive filter elements.
They, like no other design element, affect the power, efficiency, and service life of the Granta engine. Installing a good zero-resistance filter will give the engine up to 10% additional oxygen, which will have a positive effect on the combustion process. The mixture will burn faster, without residues, and as a result, engine power will increase by several percent. Tuning the exhaust system will also add a few percent of power to the engine. However, in the case of the exhaust manifold, you need to be careful and choose among the offers those companies that have already proven themselves. There is good quality steel, anti-corrosion treatment and successful exhaust routing schemes.

4-2-1 is an excellent manifold, especially well made and without the effect of parasitic swirl, it can simplify the exit of exhaust gases, and as a result, improve the purging of the cylinders at high engine speeds. We are not yet talking about refining the muffler itself, which can be either fancy or quite modest, but effective.

Adjustment

This is a required step. Lenses in xenon headlights require adjustment after installation - this is the only way to achieve efficiency from these devices and not dazzle oncoming drivers. To set up, you need a flat vertical surface, a tape measure and something to mark the wall.

The machine is placed as close to the wall as possible. What happens next? A line is drawn on the wall surface that corresponds to the vertical axis of the machine. Then you need to drive away to a distance of 7.5 meters.

Using a tape measure, measure the distance from the ground to the center of the lens. Next, measure the distance from the lens to the vertical axis of the machine. Then a point is found on the wall, which is located at the level of the headlights. From this point, another horizontal line is drawn 3.5 centimeters downward. Two lines are lowered onto it perpendicularly - they must correspond to the centers of both lenses. The headlights are adjusted using a corrector so that the light beam is clearly at the intersection of the horizontal and vertical marks. This is how the lenses in headlights are adjusted for xenon.

Updated Lada Granta: all the details about the extended family

Without waiting for the Moscow Motor Show, which will open this week, AvtoVAZ has completely declassified the updated Granta. In addition to the sedan and liftback, the modernized family included the previous Kalinas (hatchback, station wagon and cross-station wagon), that is, the Lada Kalina brand ceased to exist.

VAZ employees admit that there was actually no question of which of the two names to keep in service: Granta sells much better than Kalina, and market research has shown that buyers have a more neutral attitude towards the Granta brand. Therefore, from now on, the Lada Granta has four body types to choose from with a single front end design.

So, Granta got a new front bumper with chrome inserts, a radiator grille and headlights, but in addition the shape of the front fenders and hood was changed. Its beak has become slightly longer, and the windshield washer nozzles have disappeared from the surface and are now located under the trailing edge. Although the headlights are new, their layout has not changed: the running lights are still located near the radiator grille, and the turn signals are at the edges.

The most serious changes to the rear are on the sedan. The trunk lid with a small spoiler tail is new, and the license plate area has been moved to it from the bumper. As AvtoVAZ chief designer Steve Mattin said, this alteration had to be done because the loin of the pre-reform Grant looked too heavy and visually narrow. The hatchback, liftback and station wagon do not have this problem, so their hardware remains untouched. But all variants have modified rear bumpers with black inserts, and on the liftback they are stylized as a diffuser.

The design of the wheels has changed, and the arches are equipped with soft fender liners made of a special material that does not absorb moisture and effectively absorbs impacts from stones. Turn signals in mirror housings appeared on expensive versions of the pre-restyling Grant. The trunk lock on all body variants now has a button and an electromechanical drive, and only the simplest sedan variants retain the key cylinder. And from now on, all modifications will have bumpers in body color: black elements can no longer be found even on basic versions. Two new colors have appeared in the palette - Techno (gray-brown) and Carnelian (red).

Trunk release button

The interior design of the updated Granta does not depend on the body type. AvtoVAZ said goodbye to the original Grant front panel, installing on all versions a panel from the previous Kalina with rectangular central ventilation deflectors. There are not many changes: this is an X-shaped decor around the same deflectors, as well as white backlighting of buttons and instruments instead of green. The instruments themselves are the same, but are now designed in Vesta style: they have orange rims and radial digitization.

The front seats have been seriously improved: not only new upholstery has appeared, but also enlarged side support bolsters, and in expensive trim levels there is finally height adjustment of the driver's seat (in the range of 40 mm). The area of ​​all five head restraints has also been increased. The ERA-GLONASS emergency warning system with a button on the ceiling is now installed on all Grants without exception.

The set of power units is the same. The basic eight-valve 1.6 (87 hp) is combined with a five-speed manual transmission, a sixteen-valve 1.6 engine with a power of 98 hp. works only in tandem with a four-speed Jatco automatic transmission, and the engine produces 106 hp. a manual transmission or an AMT robot is installed. And although the share of two-pedal versions in the demand structure of the pre-reform Grant/Kalina family is small (6% according to Autoreview), VAZ decided not to give up two automatic transmissions in order to preserve the choice for buyers. For example, car sharing companies strictly order only cars with the classic Jatco automatic transmission.

On the left is the Jatco automatic transmission selector, on the right is the AMT automatic transmission selector

Technical changes are few and mostly related to the transmission. For cars with “mechanics” and “robots,” the gear ratio of the main pair has been increased from 3.7:1 to 3.9:1. This made it possible to make the cars more dynamic: for example, an 87-horsepower sedan now reaches 100 km/h in 11.6 s instead of 12.2 s, and a 106-horsepower manual version takes 10.5 s versus the previous 10. 9 p. Well, the AMT “robot” has been modernized following the example of Vesta: it has a creeping mode (the car starts moving when the brake pedal is released), the noise level has been reduced and a more wear-resistant clutch has been installed. A Sport mode has also been added, which is activated by a button on the center console and features reduced gear shift times. In addition, the calibrations of the gearless electric power steering have been changed.

So far, AvtoVAZ has announced only initial prices for the updated Granta. The sedan costs from 419,900 rubles (an increase of ten thousand), the liftback - from 436,900 rubles (plus two thousand). But the former Kalinas with a name change acquired simpler configurations and became cheaper! The hatchback is now priced at the same 436,900 rubles as the liftback (minus 23,700 rubles), and the station wagon - at least 446,900 rubles (minus 28,300). A set of air conditioning and heated side mirrors will cost 26 thousand, but detailed price lists with all prices and equipment will be published on the start of sales on August 30.

The elevated Lada Granta Cross station wagon will hit the market a little later, so even the base price has not yet been determined for it (a pre-restyling car costs at least 545,800 rubles). Subsequently, the “warmed up” Granta Sport will be updated. Such cars will be offered in sedan and hatchback bodies, but there are no plans for a Sports liftback yet, although the release of this version looks logical - and prototypes of such cars were even built in Togliatti.

In the first half of the year, the most popular of the Grant/Kalina family was the sedan (64% of sales). The liftback accounted for 18%, the cross-station wagon took 10%, the regular station wagon – 5%, and the hatchback – only 3%. According to VAZ calculations, this structure of demand after restyling will not fundamentally change, except that hatchbacks and station wagons, thanks to more affordable versions, may be a little more in demand.

And another effect of combining all versions into one family will be reflected in statistical reports. Lada Granta will be able to return to first place in the absolute sales ranking, because the total sales volume of the pre-reform Granta and Kalina for seven months of this year amounted to approximately 63 thousand cars, while the current leader Kia Rio found 59 thousand buyers.

Source