How to remove the cigarette lighter of a VAZ 2110 8 valves

For the modern driver, this device, located next to the ashtray, has become almost indispensable. Even non-smoking drivers use the cigarette lighter, because through it you can connect a charger for a mobile phone, tablet or other gadgets. Therefore, a broken cigarette lighter becomes a real inconvenience for the car owner.

However, it is not difficult to remove the device and carry out repairs yourself. Read the article about why the cigarette lighter burns out and how to remove it on a VAZ 2112 with your own hands and replace it with a new part.

Replacing the cigarette lighter for VAZ 2110, 2111, 2112

If previously only smokers used the cigarette lighter in a car, today it acts as a power source for DVRs, compressors, car refrigerators and many other devices, and with such intensity of use, replacing the cigarette lighter in VAZ 2110, 2111, 2112 cars may be required much more often.
The owner can carry out such repairs independently, without contacting a service station. But, for this it is necessary to at least understand the connection diagram of the node to other modules of the on-board network.

How to connect the device to a cigarette lighter without a plug

Some owners decide to abandon the device itself and prefer to install other devices directly. To connect the device directly without a plug you will need:

blowtorch, solder;
screwdriver.

Procedure.

We dismantle the car cigarette lighter, gaining access to the cables.
We connect the wires of the installed device, observing the polarity.
We carry out the assembly.

Connection diagram.

A constant minus. Comes to the car body.
A constant plus. Connects through a fuse to the battery.
Plus, coming up to the backlight bulb.

Order of Operations

Before removing the cigarette lighter of a VAZ 2110, 2111 or 2112, you need to de-energize the circuit; to do this, remove the negative terminal from the battery. Now you can start working directly:

It is necessary to remove the plates on each side of the instrument tunnel; to do this, unscrew two bolts from each. On the right side, disconnect the backlight and cigarette lighter connector.

The housing of the unit is fixed to the casing of the instrument tunnel; it must be removed. The trim is located under the handbrake lever. It can be easily removed with a flat screwdriver.

Also, using a flat-head screwdriver, you now need to pry and remove the housing from the gearbox shift lever.
There is a screw under the cover; you need to unscrew it with a Phillips screwdriver.
You need to remove the top cover of the instrument tunnel. Now the cigarette lighter is accessible. You can remove its cartridge. Then the screen is removed so that the tabs come out of the grooves on the light guide.
Use a flat-head screwdriver to press the latch next to the cigarette lighter socket, so it is released from the light guide.
Now you can remove the assembly along with all the elements.
Then you need to tighten the latches on the light guide, so it is immediately disconnected from the assembly.
If you need to change the LED itself, it can be easily removed by pressing the tabs on the housing. When installing a new device, make sure that the slot in the casing aligns with the protrusion on the housing.
Now you can begin installing the new cigarette lighter. First, it is connected to the light guide, the following operations are performed in the reverse order.

To replace the cigarette lighter of a VAZ 2110, 2111, 2112 with your own hands without disassembling the tunnel, watch the video:

Required Tools

Before dismantling the cigarette lighter on a VAZ 2110, repairing it or installing a new device, or replacing a fuse, you will need to stock up on suitable devices. To work you will need:

Phillips and standard screwdriver;
protective gloves.

To fix a broken cigarette lighter or fuse, the following will be useful:

multitester;
blowtorch with solder;
heat shrink tubes, electrical tape;
wire cutters;
needle file

Let's summarize

Obviously, the procedure for replacing the cigarette lighter is quite simple, even a beginner can do it. But you need to understand that the cigarette lighter will have to be changed often if the current consumption increases above 25 amperes. Once this value is reached, the entire procedure described above will have to be performed again, since the node will inevitably fail. The most common reason for this is connecting multiple devices at the same time. You should not use tees, and you should always know exactly how much the device you want to connect to the cigarette lighter consumes. This will extend the life of both the unit itself and the fuses.

Source

The principle of operation of the cigarette lighter

The principle of operation of the cigarette lighter is as follows:

in the inactive position, the cartridge is in the socket, while the heating element circuit is open.
When the cigarette lighter handle is depressed, the cartridge is immersed in the socket and the circuit is closed.
The thermoelement starts heating.
When the desired temperature is reached, the contacts of the bimetal holder diverge and the cartridge spring throws it out of the socket, breaking the power circuit.
The cartridge is removed from the socket and used to light a cigarette.

Uninterrupted operation of the cigarette lighter and the safety of the vehicle's electrical network are ensured by a separate 25 amp fuse. It is located in the relay and fuse block, most often marked as F18, less often as F8. In the first case, together with lighting, the stove operates; in the second, the lighting lamps under the hood of the car are ensured.

Important! The maximum current for which the cigarette lighter is designed is no more than 15 amperes, voltage - 12 volts. The fuse resistance SHOULD NOT be less - optimally it should be 25 amperes.

Why does the cigarette lighter on a VAZ 2110 not work?

This device is rarely used in a car for its intended purpose, for lighting cigarettes. However, it is popular even among non-smoking drivers. Other devices can be operated from the cigarette lighter socket. Most often they connect to the socket:

video recorder for recording movement;

fan;

additional power bank for powering a phone, tablet or laptop, charger for these devices;

navigation system;

compressor for inflating tires.

Therefore, failure of a part or fuse can lead to a lot of inconvenience for the car owner. Read the article about why the cigarette lighter in the VAZ 2110 model does not work, how to check it, find out the cause of the breakdown and carry out repairs.

VAZ 2110 cigarette lighter diagram

The device is powered through car wiring. The VAZ 2110 cigarette lighter connection diagram is shown in the photo. The pinout of the device is as follows: three wires come to the device - two positive and one negative.

Red, positive – connected to the cigarette lighter battery through fuse F18. The circuit current is 25 amperes, and if this parameter is exceeded, the protective element burns out.
Yellow. The positive wire is responsible for the cigarette lighter lamp.
Black, minus. It comes to the cigarette lighter body, and the other end is a mass powered through the car body.

Onboard circuit diagram and cigarette lighter fuse

The photo shows what the cigarette lighter assembly 2108-3725010 looks like. The yellow wire is the backlight power, and the red and black wires are connected to the heater.

Cigarette lighter assembly

As you can see, the ground wire of both circuits is common (black). Our words are illustrated by a diagram.

Standard version of the electrical circuit

Note that two fuses are responsible for the operation of the cigarette lighter - F18 and F9. The circuit of the first of them includes the glove compartment illumination.

If the cigarette lighter does not work, the first thing to do is open the glove compartment. There is no backlight, which means we check fuse F18. Then we look for a short circuit in the circuit.

What to do first

Be sure to disconnect the negative terminal of the battery (key “10”). Then, after removing the trim near the passenger's feet, find the connector with the black and red wires (see photo). It is disconnected, just like the connector with the yellow cord.

Heating element connector

At this point, all operations with electricity can be considered completed.

A cord of any color can come from the lamp. Find a connector with one terminal - this is what you need.

VAZ 2110 cigarette lighter does not work: reasons

Over time, any part can fail. Before you replace it with a new one or repair it yourself, you should understand the reasons why the VAZ 2110 cigarette lighter or its backlight does not work. A list of the most common faults and methods for solving them is presented below.

Fuse burned out

One of the most common cigarette lighter malfunctions is a worn-out protective element. The circuit current for normal operation of the fuse should not exceed the parameter 25 amperes. This fuse is located in the mounting block.

Diagnosing cigarette lighter problems

If malfunctions occur, the device should be inspected to determine the cause of the failure.

Turn on the heater fan. If it does not work, then the VAZ 2111 cigarette lighter fuse located in the mounting block has blown.
We inspect the contacts on the device itself and its socket. If there are oxides or rust, remove them with a file.
Visually inspect the cables coming to the device for fractures or breaks. We test the wires using a multitester. We turn it on for resistance, and then check each of the three cables coming to the device.

After identifying the problem, you can begin to repair the device.

Replacing the cigarette lighter VAZ 2110

To carry out the work you will need to stock up on suitable tools. You will need:

Screwdriver Set;
blowtorch with solder;
protective gloves;
multitester or 12 volt lamp;
insulating tape.

Before replacing a non-working VAZ 2110 cigarette lighter, you need to buy a working part. There are different options for the car. A standard long device has a number of disadvantages: poor contacts, unpresentable appearance.

Therefore, drivers prefer short Euro models. Their price ranges between 400-800 rubles, depending on the manufacturer. It is advisable to choose an original part. Installing such a car cigarette lighter yourself is not difficult - detailed instructions are shown in the video.

Is there a standard cigarette lighter?

VAZ 2112 models that came off the assembly line are equipped with long, old-style instruments. Their disadvantage is that they do not provide reliable fixation of connected devices that are designed to meet European standards. As a result, cigarette lighters sometimes short out and refuse to work correctly.

Many owners decide to replace the device on the 2112 with a new device (see photo). The cost of such a cigarette lighter ranges from 600 to 1.5 thousand rubles. Too low a price indicates low-quality materials used in the production of the part. Therefore, you should discard such elements; they will quickly break.

How to properly remove the cigarette lighter on a VAZ 2110

The disassembly process is as follows:

Open the hood and remove the negative terminal from the car battery. This will de-energize the system and eliminate the possibility of a short circuit during repairs.
It is necessary to remove the plastic trim on the center console. To do this, unscrew the fastening bolts.
Afterwards we get access to the wiring blocks. Disconnect the three-pin cigarette lighter connector.
We dismantle the facing lining under the parking brake, gaining access to the tunnel mounting bolts.
We unscrew them and then remove the plastic casing.
Pull out the car cigarette lighter socket to disassemble it. To do this, you will need to tighten the latches and carefully remove the metal cartridge.

Replacement with tunnel dismantling

According to the user manual, the device must be removed by removing the decorative cover of the central tunnel. The instructions will tell you how to correctly remove the cigarette lighter of the VAZ 2110.

Turn off the ignition, open the hood, remove the negative terminal.
We unscrew two bolts securing the cover of the instrument tunnel (see photo).
Carefully remove the wire block.
Now you need to remove the decorative plastic trim under the parking brake.
Unsnap the latches of the gearshift lever cover and remove it.
Unscrew the screw using a Phillips screwdriver.
Move the seats aside, and then remove the screw from the tunnel near the gearshift lever.
The tunnel protective cover should now be easy to remove.
We dismantle the cartridge along with the filter and fuse.
We remove the device in order to repair or replace it.
Installation of the device is carried out in the reverse order.

Connection diagram

There is the filament element itself, contact connectors and a fuse.

The most accurate pinout of the part can be found in the vehicle owner's manual.

How to remove the cigarette lighter

To completely remove the element from the car, you will need to disassemble the device and perform a certain sequence of actions.

Disconnect the battery from the car.
Remove the device casing and remove the device socket.
There is a terminal block under the facing plate. The connection is disassembled.
Squeeze the indicator light screen until the clips come out of their sockets.
Next, use a screwdriver to unclip the light guide fasteners and remove the part.
Next, you need to remove the device from the facing element.
Next, the mounting socket itself is removed.

Disassembling the center console

To completely remove all the cigarette lighter wiring, you will need to dismantle the instrument console.

Use a Phillips screwdriver to unscrew the screws from the side grooves.
Next you need to disconnect the clips in the central part.
If everything is done correctly, the panel will be removed from its fastenings and can be dismantled.

After unscrewing the part, access to the cigarette lighter contact group opens.

Spiral

If everything is working normally, the coil heats up in about 20 seconds. Then the cartridge is fired. In case of strong changes in heating time, the contacts of the spiral should be straightened or bent.

Connecting a new cigarette lighter

To install a fresh element on a VAZ 2110 you will need to follow the procedure:

disconnect the battery;
disassemble the center console of the tidy;
disconnect the terminals of the contact group;
follow the dismantling procedure described above;
install the new part in reverse order.

Pinout

The Euro cigarette lighter 2110 has only three contacts.

The negative terminal is connected to the car body.
The plus filament is located in the center and is connected to the cigarette lighter power line coming out of the fuse box.
The third contact is intended to supply power from the vehicle's side lighting.

Important! The standard block 2110 is not suitable for working with the Euro module. To do this, just find a contact connector in any auto store.

How to correctly connect the cigarette lighter directly to the battery via a fuse

It is enough to perform a simple sequence of actions.

Route the power line to the battery under the hood.
Connect the line securely to the battery terminal.
Next you need to insert a fuse into the system. It is usually placed directly in front of the device.
It is also useful to install a switch or relay here. To be able to accurately control the activation and deactivation of equipment. Typically, users connect the relay to the ignition switch. Thus, only after turning the key in the cylinder, the device will be powered.
The final step is connecting the wiring to the device.

Removing the cigarette lighter socket

The process of dismantling the seat is carried out in the same way.

We de-energize the system by removing the negative terminal from the battery.
It is necessary to disassemble the side cover to disconnect the wiring plug.
Dismantle the gearbox casing and parking brake tunnel.
We bend the plastic screen so as to pry off the fixing tabs.
We remove the cigarette lighter socket through the opening with the wiring block.
We inspect the device and proceed to replacement.

Repairing a broken cigarette lighter

Sometimes replacement is not necessary. In some situations, you can carry out repairs yourself. Inside the car cigarette lighter itself is a small mica plate. This is a semiconductor that often fails. It needs to be removed. After this, it is worth assembling the device and then checking that it is working correctly.

Often you just need to treat oxidized contacts or solder fallen wires.

Instructions for replacing the backlight lamp

If you need to carry out this procedure, then you should act according to a certain scheme.

Turn off the ignition, and then remove the wires from the battery.
To get to the lamp, we dismantle the plastic lining inside the cabin.
Disconnect the gearbox and parking brake housing.
We take out the car cigarette lighter along with the backlight.
Squeeze the screen to remove the metal tendrils.
We rotate them 90 degrees, and then remove the lamp from its seat.
We install the new element, and then carry out the assembly. When connecting, you should use A 12-4 lamps.

A detailed video on how to remove a VAZ 2110 model device with your own hands is presented above.

Is it worth making an additional cigarette lighter?

Many drivers install a second socket on their car. This will increase the number of potentially connected devices. But we must remember that the electrical system will experience heavy loads and the fuse may trip. Therefore, it is important to connect all wires correctly.

It is necessary to connect the new connector through a fuse to avoid melting the wires. You will need to cut a separate hole in the interior or trunk. An alternative to this method is to purchase a splitter that plugs into a standard socket.

How to check your cigarette lighter for problems

First of all, you need to visually inspect the wires that go to the mounting block (through them the cigarette lighter receives current from the battery).
In addition to inspection, you also need to check the connectors of the connections - they must “fit” tightly. It happens that they become separated.
Special attention should be paid to electrical connectors. They are located approximately in the same place as the passenger's left foot.
If there are problems with the wires, then you need to replace them (you will need new wires, electrical tape, a utility knife for stripping the insulation, rubber gloves).