Step-by-step instructions for replacing the outer and inner door handles on a VAZ 2114

Print this article Font size 16

Tuning is a common phenomenon among modern motorists. But if some fully fit into the design of the engine, chassis and other units that affect the speed and power of the car, then others prefer external tuning. The installation of Euro handles on the VAZ 2114 is a prime example of this.

Photo of installed euro handles on VAZ 2114

What are Euro pens?

It is impossible to say for sure why they are called Euro pens. Apparently, this somehow relates to European cars, Western auto production. Let's be honest, the factory door handles on the “fourteenth” are far from being an example of automotive design art.

Euro handles are a set of door handles that significantly transform the appearance of the car and allow you to open and close doors more comfortably. They have a comfortable design and are pleasant to hold with your hands. Plus, the quality of individual handle models significantly exceeds even VAZ factory elements for opening front and rear doors.

Removing and installing the outer door handle on VAZ 2113, 2114 and 2115

The first step is to remove the door trim. After this, access to the lock mechanism and its rods from the inside opens.

Now unscrew one nut securing the handle from the inside, as shown in the photo below.

The second nut is located on the outside:

From the outside, move the handle slightly to the side, as shown clearly:

And then it is necessary to disconnect the two rods from the handle mechanism of the VAZ 2114-2115 from the inside. This can be done using a flat screwdriver, and the shorter it is, the more convenient it all is.

The rods are hinged, so you will have to apply moderate force to disconnect them from the lock mechanism. After which you can finally remove the handle and replace it with a new one.

It is worth noting that the price of a new factory handle for the front doors is around 300 rubles, but the rear ones can be bought a little cheaper - from 200 rubles apiece. Installation occurs in the reverse order of removal.

Many people tune their cars, some increase their speed characteristics, while others prefer to improve the appearance and increase the comfort of using their personal cars. This type of tuning includes Euro handles for the VAZ 2114.

Handles "Lynx"

Despite the fairly extensive range of Euro handles suitable for the VAZ 2114, domestic owners of the “fourteenth” most prefer to use the “Lynx” kits. These are high-quality, reliable products with excellent design, smooth lines, streamlining, and excellent grip comfort.

Handles Lynx

Plus, of course, quality plays a big role in the popularity of accessories. Here it is not possible to make any claims to the Lynx Euro handles for the VAZ 2114 car.

Installing euro handles on a VAZ 2114

Now let's look at the whole process of self-replacement. To carry out the work you will not need any special tools, lifting mechanisms or other favorable conditions. All you need is:

• flat and Phillips screwdrivers;
• key to "8";
• spare clips for fastening the casing (may be useful if you damage the old fastenings);
• a couple of hours of free time and a little patience.

So, the whole stage includes the following steps:

1. The first, rather lengthy and responsible job is removing the door trim. First we need to remove the so-called card. It is better to start work from the front doors. First, use a Phillips screwdriver to unscrew several screws around the perimeter of the bottom of the door (storage niche). To remove the trim, you will need to disconnect the window handles and door handles. Disconnect the contact chips. Try to remove the trim carefully, gradually snapping the clips off the fastenings and metal of the doors. It happens that some clips get damaged, so stock up on a small amount in advance.
   Read also:  Install a tachometer on a VAZ 2105: why and how to do it
2. Now that the door card has been removed, we can observe the entire interior space. We are, of course, interested in the handle mount. So, we take a regular “8” key and unscrew the nut from inside the door, while at the same time holding it with our hand (so that it does not fall into the internal cavity). The second fastening nut is located at the very edge of the door, above the locking unit. As in the first case, unscrew it.

3. Next, you need to remove the two internal rods from the handle.
4. From the outside of the car, pull the door handle towards you, while rotating it so that the rods come out of the hole in the metal.
5. Take a new product and transfer the internal contents from the factory handles (locking mechanism, cylinder and rods) onto it. Sometimes certain models of Euro handles are equipped with their own rods.

6. At the replacement stage, it would not be superfluous to lubricate the internal parts of the lock with a special product. In addition, the places where the handles are attached must be cleaned of dirt or dust.
7. Rear handles are much easier and faster to change (they do not have a locking mechanism or cylinder).
8. Install everything in reverse order. At the same time, before installing cards on the doors, it is very important to make sure that the mechanism is working. Check each door individually; opening and closing should be done without any complaints.

Now the question of how to install Euro handles on a VAZ 2114 will not cause you confusion or any difficulties.

Varieties

The Lynx Euro pens have a factory designation, which determines the differences between the sets.

1. IN 1. This designation indicates that the package contains four handles - two rear and two front. In this case, the front larvae do not have.
2. AT 2. There are also four handles, a pair for the rear and front doors. Only here the larvae are present.

Which one should I choose? The question is purely individual. On the one hand, B1 have a solid, smooth structure that is not spoiled by key holes. For external tuning they are simply perfect.

The second option is preferable for those who value quality, visual appeal, but at the same time reliability. After all, the presence of a cylinder will give you the opportunity to open the car with a key if problems arise with the alarm or key fob.

Installation

Installing Euro handles on a VAZ 2114 is a lengthy process. Get ready to devote a whole day to this issue. It is best to learn the disassembly and assembly sequence using visual videos.

The stages of installing euro handles are as follows:

• The door trim is removed. This is a rather lengthy task that can take up the most time among all other processes. Don’t forget, the casing still needs to be put in place later.
• There is no need to drill, saw or cook anything. The only exceptions are those Euro handles that are not intended for the VAZ 2114. They are adjusted, something is cut out. Complex and sometimes pointless tuning. Today there are many excellent Euro handles that fit perfectly on the “fourteenth” model without unnecessary manipulations during the installation process.
• Each new part is installed in place of the standard one.
• It is advisable to arm yourself with additional fasteners for the trim in advance, since an inexperienced car owner can damage them during disassembly or reinstallation. They are cheap, but can come in handy at any time when replacing Euro pens.
• After removing the old handles, be sure to clean the socket and treat the surfaces with polish. After this, proceed to install new elements. There is nothing complicated there if you remember the dismantling process well.
• The penultimate stage is reassembly.
• The process of installing Euro handles on a VAZ 2114 is completed by cleaning new accessories and putting things in order inside and outside the car.

Euro pens are a simple but effective way to look at your car differently. Initially, it seems that installing such elements will have little effect on the appearance. But after installation you realize how different the car looks. Such a small accessory has a very positive effect on the VAZ 2114. This is a good and fairly simple type of tuning.

Locking mechanisms, handles and other elements of VAZ 2114 cars, to put it mildly, do not have a very attractive design. One such example is standard door handles. Fortunately, on the market for spare parts and auto accessories you can select and purchase Euro handles for the VAZ 2114. How do they differ from the original ones, you ask? There are differences, here are some of them: smooth operation of the product, excellent appearance and more convenient design. In addition, it is worth noting the higher quality of the materials from which the modified handles are made. As a result, they will last much longer than stock ones.

Quality checking

Whether it be Lynx or European pens from another manufacturer, you definitely need to make sure of the quality of the products offered to you. There are some useful tips for this.

1. Buy directly from good stores rather than ordering online. Today it is important to order many spare parts online. But the problem is that you won't be able to see or touch them until delivery. If we are talking about online ordering, check the reliability of this online store, read reviews about it, study the nuances of delivery and payment. The best option is to pay the courier on the spot. This way you can first look at the handles, and only then, if everything is good, pay for the order. Well, when you are in a regular store, there will be nothing difficult in studying spare parts in detail.
2. Package. Surprisingly, it is important to pay attention to the packaging. Factory products must have barcodes, certificate marks, full instructions, a warranty, and so on.
3. Content. If each pen is packaged in a separate bag, this indicates a responsible approach by the manufacturer. After all, the transportation process takes a lot of time, and you yourself know the quality of our roads. Constant shaking leads to friction between parts, which leads to scratches and damage. Separate packaging will prevent this from happening.
4. Instructions. Good manufacturers provide detailed instructions for installing them along with Euro handles. There is nothing complicated about this, but the very fact of the presence of this instruction already speaks volumes.
5. Quality. Alas, it cannot always be determined visually. Nowadays low-grade materials are so skillfully disguised that only laboratory tests can help you in some cases. As for European pens specifically, the best guarantee of quality is purchasing products from a trusted manufacturer. Such as Lynx, for example.

Replacing the inner handle

If the internal door handle of a VAZ 2114 is broken, then cosmetic repairs are impossible. To repair, you will need a standard set of tools: several types of screwdrivers, a sharp knife and a 8mm wrench. It is better to change the part while in the salon. Algorithm for replacing a part:

1. The lining is removed. It is pryed off with the thin end of a screwdriver. It is important to remove all fragments of decor.
2. The door card is being dismantled.
3. The rod is disconnected.
4. To remove the remains of the broken opening device, the fasteners are unscrewed.
5. A new element is installed. It should be attached to the rod, and then the facing elements should be reassembled.

The trim on the VAZ is fixed with special clips. To remove them, you can pry up the edge with a screwdriver. Proceed with caution as they are plastic and may break. This is affected by rough handling, material wear or cold.

The second stage is assembly!

1. Before installing the Euro handle in the VAZ 2115 door, you need to remove the lock along with the cylinder from the old handle. To do this, remove the rod that is attached to the cylinder, then carefully remove the retaining ring of the cylinder along with the spring. We install the key in the keyhole and pull it towards ourselves along with the cylinder.
2. We clean and lubricate the mechanism, as well as all rods and connections, after which we install the rubber gasket that comes with the Euro handle and begin assembly.

1. Before final assembly, we check how the handle and lock work, making sure that everything is assembled correctly and works as it should.
2. We attach the handle to the bolts and assemble everything in the reverse order.

As you can see, installing Euro handles on a “tag” is a fairly simple task that any “home” craftsman can do. By installing Euro handles “Lynx” on a VAZ 2115, they can improve the appearance of the car and also make opening doors more pleasant.