Which torpedo is suitable for the VAZ 2107? When you want comfort. Panel for a VAZ 2107 car: which one can be installed?

In the interior of the VAZ 2110, the dashboard is the most noticeable part. Every driver wants to sit in a stylish and well-maintained interior. But the standard panel looks angular and gray. This is especially noticeable after long-term use, when abrasions, scratches and cracks appear on the panel. Motorists solve this problem in different ways - some install another standard dashboard from a VAZ 2110, other drivers prefer to install a Europanel - this is the name of the trim from a third-party manufacturer. The trim allows you to transform the interior and turn the “ten” into a foreign car, at least on the inside. Whatever you choose, removing the panel is a must. In this material we will tell you how to properly dismantle the standard panel and install the Euro version.

Dismantling the VAZ-2107 dashboard

Removing the dashboard on a classic “Seven” is quite simple. This procedure is necessary when replacing lamps or electrical appliances, as well as if you want to tune the VAZ-2107 torpedo. The work is not a difficult process: it does not require special tools or extensive knowledge in the plumbing field.

Step-by-step procedure for dismantling the VAZ-2107 dashboard:

the ground cable is disconnected from the battery terminal;
the levers of the heating device are removed using a screwdriver;
the protective plug is removed from the bolt responsible for fastening the panel;
the bolt is unscrewed, after which the panel is dismantled;
the speedometer cable nut is unscrewed, after which the device itself is removed;
the voltage supply cables are disconnected from the economizer;
the wire blocks are removed;
The dashboard is removed.

After the structure is removed, you can begin work on replacing any of its components and elements. You can install the device using the same instructions, the steps of which are performed in reverse order.

Recommendations to avoid problems during the process of removing the torpedo

If you intend to remove the dashboard in a VAZ-2107 car for the first time, be sure to follow the following rules:

When removing the upper part of the steering column protective cover, be careful not to damage the ignition switch O-ring. This part is made of rather flimsy rubber that cannot withstand strong mechanical stress;
Mark all connectors, wires and switches that you remove to gain easy access to the dashboard. They will avoid confusion during the installation process;
When removing the additional dashboard, do not try to use force, as there is a fairly high risk of breaking the plastic clips. Finding a replacement for them will not be so easy.

Radio tape recorder

No upgrade of the “six” is complete without installing a speaker system or at least a simple radio. A standard place for a radio receiver in the beard of a small-sized “six”. It should be trimmed to standard 1DIN. This can be done with a metal file. Then sand the edges with sandpaper.

Installing a radio

The radio tape recorder is attached to the beard using a metal case. Radio installation steps:

Having bent all the tabs, use special spatulas to remove the radio from the case.
The metal base is inserted into the prepared hole.
We fix it using special tongues.
Then carefully insert the radio unit itself, which should snap into place.

Cables are included to connect the player. The most commonly used are:

black - “earth”;
red and yellow (often wound together) - ignition “+”;
blue - power for the active antenna;
white - front left (FL) speaker;
gray - front right (FR) speaker;
green - rear left (RL) speaker;
purple - right rear (RR) speaker.

You can connect the radio to the ignition switch to the free INT terminal. Then it will only work when the engine is running and the ignition is on. This connection scheme will protect forgetful car owners from completely draining the battery.

If you twist the red and yellow wires together, the radio will no longer depend on the ignition. You can listen to music with the ignition off too.

The standard connection diagram is usually glued to the cassette player

Typically, a connection manual comes with the audio system. Following the instructions and color scheme, installing audio equipment in the “classic” will not be difficult.

Speaker installation

A good place to place the speakers would be the front door panels. If you choose the right size speakers, they will fit here very well. To install, perform the following steps:

Remove the trim from the doors.
On the casing we cut a hole for the speaker. A hole of the required size can be made using a template. To do this, trace the speaker on paper. You need to work carefully so as not to miss the size.
We attach the column and screw it to the casing using the fastening that comes with the kit.
We carefully lay the wires in the cavity of the doors so that they do not sag or fall out.
We install the casing in place.

To give a finished look, the door cards are covered with leatherette, and a protective grille is installed on the speaker.

Additional speakers are placed on the dashboard or on the side pillars of the windshield.

For better sound distribution, high-frequency speakers are installed at the head level of the driver and passenger

If the car owner changes the entire beard, creating it himself to his own size, then he can place a 2DIN radio in it. A player with a large screen will add charm to the appearance of the car.

If the car has a 2DIN radio, then you can connect the rear view camera to it

Some craftsmen insert speakers instead of air ducts. But from personal experience I know that the standard “six” torpedo does not have side window blowing. In humid and cold weather, windows fog up and freeze. If you remove the air ducts for the windshield, the airflow will worsen even more. Therefore, I do not recommend this installation of speakers.

Choosing the right dashboard

Dismantling the old torpedo

If we talk about which car the panel fits the VAZ 2107 from, then auto mechanics recommend installing a torpedo from a BMW or Volga 3110. Often, “Seven” car owners prefer the second option. The main task in this case is to install the oval panel into a square one. A BMW torpedo, unlike its domestic counterpart, does not require the installation of additional plastic.

When deciding which panel is best suited for the VAZ 2107, you need to take into account that the dashboard from the 3110 car model has a different shape. To install it, the corners are removed and additional work is carried out to adjust this structure.

Panel or torpedo?

Which torpedo is suitable for the VAZ 2107? The issue is complex, but completely solvable. Just to begin with, you should determine how radical the alterations will need to be made. Such tuning can be done in two ways:

Replacing the dashboard;
Replacement of the entire torpedo.

The first option will allow you to get by with little expense and replace the panel with another one that suits you more. You just have to adjust the socket a little in size. It is somewhat more difficult to install a new panel. At the same time, it must be suitable in size and provide the ability to connect all vehicle systems. The final choice depends on your ultimate goals and capabilities.

Gazelle dashboard

When replacing the instrument panel on a VAZ-2107, the equally popular Gazelle often becomes the donor. Despite the fact that the manufacturer of these two machines is the same, the work will be more complex. The Gazelle panel has large dimensions and also has a completely different configuration, shape and size. You will also have to tinker with the electrical wiring: you will need a number of adapters, as well as knowledge from the field of electrical engineering.

In such work, you will have to use a jigsaw and a soldering station to resolder the adapters. This is a rather painstaking procedure that should be approached with special care.

Read, it may come in handy: If the windshield wipers do not want to work

Tuning VAZ 2107 with a torpedo from BMW e-34

Also, this appearance has no attractiveness. Therefore, many drivers replace dashboards. The issue is complex, but completely solvable. Just to begin with, you should determine how radical the alterations will need to be made. Such tuning can be done in two ways: Replacing the dashboard; Replacement of the entire torpedo.

The first option will allow you to get by with little expense and replace the panel with another one that suits you more. You just have to adjust the socket a little in size. Feeling upset, I turned on the TV. A few minutes later an idea came. Light bulbs may also not work. And I didn’t check the devices at the time of purchase. 4 light bulbs did not work, I cleaned three, and pulled out one penny from the original instrument panel. It would have cost a little money if there had been a bug in the circuitry of my adapter - it would have been a break of about two months until I recovered my strength.

So the process was completed completely unexpectedly. It was Saturday outside, I got up in the morning and, as always on Saturdays, went to the car market.

Description of the electronic instrument cluster

The standard instrument panel on the VAZ 2107 has a simple design and does not represent anything remarkable. That is why owners of sevens often wonder about tuning the standard one, or replacing the analog panel with a digital one. Among all the advantages of the Europanel is the possibility of installing it on the seven yourself without the help of specialists. The only drawback is the price, which varies from 8 to 10 thousand rubles.

Electronic instrument clusters in Russia are produced by different manufacturers. You can install digital equipment only on injection sevens. This type of equipment may be partially unsuitable for carburetor cars. The design of the equipment uses light indicators and units of measuring devices. If we delve into the details of such a device for the VAZ 2107, then it is worth noting the following points:

The on-board computer is one of the biggest advantages of the installation. When replacing an analog panel with a digital one, the owner automatically acquires an on-board computer. As you understand, the computer only works on injection-type cars.
The speedometer and tachometer are the two main indicators by which the speed of movement is controlled, as well as the speed of the crankshaft.
Fuel indicator.
Econometer.
Emergency stop indicator and direction indicators.
Control indication of oil pressure and battery charging.

The new instrument panel on the VAZ 2107 is not only beautiful and modern. With this equipment, the driver will be informed about the need to perform maintenance procedures, having previously configured the system. The device has a backlight adjustment function, which eliminates the possibility of blinding the driver while driving in the dark. One of the positive functions of the installation is the display of only those parameters that deviate from the specified ones.

Installation of electronic combination

Electronic devices are adapted to work with control units January 5.1, VS 5.1, 7.2, M7.3, M7.4 and Bosch M1.5.4, MP7.0 and M17.9. It is also possible to connect parking sensors to the dashboard. It is not rational to install the equipment in question on carburetor sevens, since in this case the on-board computer will not function, as well as indicators, the operation of which is tied to the computer.

When installing equipment on a car, you must first remove the analog instrument panel. Initially, do not forget to turn off the power to the car by disconnecting the negative terminal from the battery. In place of the standard one, a digital instrument panel is installed, which is fixed with similar fasteners. First, power wires are connected to the device and terminated with clips. On the back of the device there are corresponding sockets for connecting plugs. In this case, no modifications will be required.

After installing and connecting the digital instrument panel, you will also need to install the handles on the control levers for the ventilation and heating system of the car. After assembling the equipment, you need to connect the terminal to the battery and turn on the ignition. When you turn on the ignition, enjoy the updated modern instrument panel on the seven.

It is worth noting separately that the necessary wires and adapters are included with the installed equipment. The on-board computer controls many different parameters, and therefore, having installed such a device on the seven, you will no longer need to frequently visit a car service center to conduct a diagnostic study and identify errors.

In conclusion, it is worth noting that the owners who installed the devices on the injection sevens are satisfied with modern equipment, modernization of the interior, as well as an increase in the number of options. In addition to the high cost, the electronic panel has another drawback - if the car already has an on-board computer, it will have to be dismantled.

Source

Changing the torpedo

Some drivers are not satisfied with the appearance of the torpedo on the VAZ 2107. Sometimes this element from the “five” may be installed on the car. In this case, a purely practical inconvenience is added to the unpleasant appearance. You have to close the glove compartment with a universal “lock”, or rather, seal it with tape. Otherwise it will constantly open. Therefore, you can change the torpedo.

Of our models, the best fit is a spare part from a VAZ 2115. You just have to use polyurethane foam to seal small non-joints. Of the foreign cars, the best fit here is a torpedo from a BMW E30

. She will look much more advantageous.

There is another option, install a torpedo from a Toyota Camry

It is slightly wider than the standard part. Therefore, for a more accurate installation, you will have to trim the torpedo a little from the bottom on the sides. But even in this case, it will interfere with the window regulators. So get ready to install electric lifts right away. This will be the best option. You will also have to struggle with installing the steering wheel cover.

The standard cover will not fit into the steering wheel opening on the BMW dashboard. Therefore, craftsmen usually perform adjustments. Some people cut the panel, but it is much easier to cut off the excess from the casing. It is better to use standard mounts from the original torpedo, only they are slightly bent. Often the torpedo can sag downwards, so it is advisable to immediately provide support.

Installation highlights

Before deciding which panel you can install, you should take into account that the original VAZ 2107 torpedo can be returned at any time. If such a procedure is carried out independently, it is recommended to use a book on repairing classics. It will take a lot of time to complete the work.

When connecting the wires, you need to remember that one goes to ground, and the second goes to the panel to the corresponding contact. It is recommended to label which connector goes where. To operate the speedometer, a speed sensor from model 2110 with 6 pulses is installed. If the “seven” is equipped with an econometer, it is recommended to install a tee from 2106 on 2 sensors, including a pressure sensor from engine 402..

Video: tuning the “Seven” dashboard

Description of the electronic instrument cluster

In our country there are several manufacturers of this type of equipment that offer their products to consumers. The electronic panel for the VAZ 2107 model car is a set of indicators and units of measuring devices, assembled in a single housing and adapted for installation instead of the factory one. This instrument combination contains the following elements:

on-board computer with a liquid crystal display measuring 132x48 pixels;
speedometer;
tachometer;
fuel level indicator;
econometrician;
turn signal indicators;
indicator lamps for oil pressure in the lubrication system and battery charge level.

To make it easier for the driver to perceive information, the computerized dashboard for the VAZ 2107 car has a familiar appearance. The speedometer, tachometer and fuel level indicator are designed as dial indicators. This instrument combination has the following functionality:

diagnostic tester;
trip computer;
alarm indicator;
alarm clock and calendar;
dynamic parameters indicator;
storage and display of service book information.

After appropriate configuration, this instrument cluster will remind you of the need to perform vehicle maintenance operations. The information content of such a panel on a VAZ 2107 car is at a very high level, and well-chosen lighting does not distract from driving the car. The instrument cluster works on the principle of indicating only those parameters that have significant deviations from the specified ones.

Installation of ready-made tuned devices on a VAZ 2107

The dimensions and connectors of the finished devices, which are intended for upgrading the “tidy”, do not differ from the standard ones. Installing them is not a problem.

It is almost impossible to confuse the connection of connectors to devices - they differ in shape.

The only thing you should pay attention to if you choose this method of tuning a VAZ 2107 torpedo is the speedometer cable. It is installed in a braid so that it can be easily removed towards the interior. In this case, it may become disengaged with the speedometer drive at the gearbox. If this happens, then after tightening the fastening nut on the speedometer, the latter will not work. To avoid having to remove the dashboard again and fix the problem, you should check the position of the cable before installing the nut.

After attaching the cable, all that remains is to tighten the self-tapping screw securing the dashboard and install the decorative trims and the daily mileage reset button in place.

The installation of additional instruments and indicators on the VAZ 2107 dashboard depends only on the tastes and imagination of the car owner.

Read, it might come in handy: Do-it-yourself acoustic shelf (photo and video)

Glass tinting

Glass tinting is an elementary type of tuning the panel of a Lada Priora. The film is attached to the outside of the glass. You can use film No. 15 or any other depending on the driver’s preference. The main thing is to choose the right shade to make the glass look good. American film, which often has a reddish tint, is not suitable for every interior.

The film is applied as usual - degrease the glass using any dishwashing detergent, Fairy and others will do

We apply the film and cut it, paying special attention to the edges. It is better to cut off the edges so that the film does not start to bubble after installing the glass in place.

Console tuning

Tuning the VAZ-2107 console is an optimization of the front panel, as a result of which many useful features and advantages can appear in the car, such as a new tape recorder, clock or cigarette lighter. Refinement of the beard of the VAZ-2107 allows you to make the vehicle more original and functional. Anyone can, through simple improvements, install a player, a modern clock, a USB socket, devices for monitoring the electrical network and small “pockets” for small items in the car.

Among the main tools, without which tuning the standard beard of a VAZ-2107 is impossible, it is worth noting: an electric jigsaw and drill; "grinder"; locksmith corner; a simple pencil; ruler; glue and stapler for furniture.

Do-it-yourself tuning of the VAZ-2107 beard may involve the manufacture of a new panel, which will initially have special areas for the location of switches and indicators. The easiest way to tune the console is with ordinary plywood with a thickness of about 6 mm. It is advisable to use artificial leather as finishing materials, which perfectly matches the color with the rest of the interior elements. Recently, car owners have even adapted to introducing carbon fiber.

Tuning the VAZ-2107 beard can be done with the help of a comprehensive modernization, which will “radically” change the interior of the car. Replacement on doors and other interior elements can be made using carbon fiber and leatherette. The new console will need to be positioned in place of the factory fixture, which must first be dismantled. By removing a standard beard, the motorist can quickly take measurements to further create drawings.

Tuning scales

In the basic version, the background of all scales is black. The marks on them look too faded. This style was relevant about 2 decades ago. Nowadays, this design looks rather poor.

A chic, sporty look is achieved by installing white scales with contrasting black markings. They can be made on a color printer using self-adhesive film.

When making improvements at this stage, do not forget to exercise maximum caution - the mechanisms are extremely fragile.

Expansion of functionality

The VAZ-2107 is equipped with a minimum of instruments, and therefore installing new ones will significantly increase the information content of the panel. Most often they add:

light and temperature sensors;
fuel consumption indicator per kilometer;
ECU;
TV, etc.

Additional holes are cut for them. It is also necessary to install wiring and make changes to the design of the machine (in particular, to provide it with missing sensors).