What bearings are installed on VAZ 2110, 2111, 2112
Position number on the diagram | Explanation of the position on the bearing arrangement diagram for VAZ 2110, 2111, 2112 | Designation VAZ |
1 | Differential bearing (right and left) | 21080-2303036-01 |
2 | Steering shaft bearing | 21080-3401120-01 |
3 | Steering gear bearing | 21080-3401123-00 |
4 | Front suspension strut bearing | 21080-2902840-02 |
5 | Steering gear | 21100-3401104-00 |
6 | Front wheel bearing | 21080-3103020-01 |
7 | Gearbox rear support bearing | 21080-1701033-00 |
8 | Bearing of the front support of the gearbox input shaft | 21080-1701031-01 |
9 | Clutch release bearing | 11110-1601182-00 |
10 | Bearing of the front support of the secondary shaft of the gearbox | 21080-1701180-01 |
11 | Timing belt tensioner bearing | 21080-1006120-00 |
12 | Timing belt tensioner bearing | 21120-1006135-00 |
13 | Generator rear bearing | 80202 (GPZ) |
14 | Generator front support bearing | Pressed into the generator cover |
15 | Coolant pump bearing | 21080-1307027-11 |
16 | Rear wheel bearing | 21080-3104020-00 |
Symptoms of failure
We replace the bearing when the following symptoms appear:
- Noise and knocking noise in the front hub.
- Severe play on the bearing.
- Leakage of grease from under the bearing seal.
- Mechanical damage to the unit.
Wheel bearing VAZ 2110, 2111, 2112
Front wheel wheel bearing
Designations:
- For VAZ - 21080-3103020-01 or 21080-3103020-02;
- According to the classification of the bearing plant (GPZ) - 6-256907 AKE12L19 or 6-256907EK12.
Dimensions of wheel bearing 21080-3103020-01 for the front wheel of VAZ 2110, 2111, 2112:
- Outer diameter D - 64 mm;
- Inner diameter d - 34 mm;
- Thickness B - 37 mm.
Installation location of the wheel bearing 21080-3103020-01 of the front wheel of VAZ 2110, 2111, 2112:
Item number in the picture | Explanation of the position in the picture of the front wheel hub | VAZ catalog number |
1 | Fist rotary right or left | 21080-3001014-00 or 21080-3001015-00 |
2 | Inner anti-splash ring | 21080-3001060-00 |
3 | Outer anti-splash ring | 21080-3001061-00 |
4 | Retaining ring | 21080-3103032-00 |
5 | Front wheel hub bearing VAZ 2110 | 21080-3103020-01 |
6 | Front wheel hub VAZ 2110 | 21080-3103012-00 |
7 | Dirt ring | 21080-3103061-00 |
8 | Bearing washer | 21080-3103079-00 |
9 | Wheel hub cap | 21080-3103065-00 |
10 | Ring sealing | 21080-3103068-00 |
11 | Wheel hub cap | 21100-3103065-00 |
12 | Nut M20x1.5 self-locking | 00001-0040442-71 |
Rear wheel bearing
Designations:
- For VAZ - 21080-3104020-00 or 21080-3104020-01 or 21080-3104020-02;
- According to the classification of the bearing plant (GPZ) - 6-256706E1S17 or 6-256706E2S17 or 6U-537906E.
Dimensions of wheel bearing 21080-3104020-00 rear wheel:
- Outer diameter D - 60 mm;
- Inner diameter d - 30 mm;
- Thickness B - 37 mm.
Installation location of the wheel bearing 21080-3104020-00 for the rear wheel of VAZ 2110, 2111, 2112:
Item number in the picture | Explanation of the position in the picture of the installation location of the rear wheel wheel bearing of VAZ 2110, 2111, 2112 | VAZ catalog number |
1 | Hub axle | 21080-3104063-00 |
2 | Rear wheel hub VAZ 2110, 2111, 2112 | 21100-3104014-00 |
3 | Dirt ring | 21080-3104016-00 |
4 | Retaining ring | 21080-3104032-00 |
5 | Wheel bearing of the rear wheel of VAZ 2110, 2111, 2112 | 21080-3104020-00 |
6 | Bearing washer | 21080-3104079-00 |
7 | Wheel hub cap | 21100-3103065-00 |
8 | Ring sealing | 21080-3103068-00 |
9 | Wheel hub cap | 21100-3104065-00 |
10 | Nut M20x1.5 self-locking | 00001-0040442-71 |
Stories from our readers
“Fucking basin. "
Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.
Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet. You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, they call it Forex. But when I started delving into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums, studying trading strategies. I tried it on a demo account, then opened a real account. To be honest, I didn’t manage to start earning money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day. I managed to get the car buy after half a year, but in my opinion this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, I have more free time for myself and my family. You’ll laugh, but I work directly on the phone)) If If you want to change your life like me, then here’s what I advise you to do right now: 1. Register on the site 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY! I also advise you to download the application to your phone, it’s much more convenient to work from your phone. Download here.
Checking the wheel bearing. There is something humming in the cabin and the hum intensifies as the speed increases. Instructions for checking bearings.
Removing the VAZ 2110 wheel bearing. It is worth noting that replacing a wheel bearing on an old car is quite difficult.
Front bearings VAZ 2110, 2111, 2112
Front strut bearing VAZ 2110, 2111, 2112
Accepted designations:
- For VAZ - 21080-2902840-02 or 21100-2902840-00 or 21100-2902840-01;
- According to the GPZ classification - 348702L20 or 348702K2L19 or 348702KL20.
Bearing dimensions 21080-2902840-02 front strut:
- Outer diameter D - 52 mm;
- Inner diameter d - 14.5 mm;
- Thickness B - 14 mm.
Installation location of bearing 21080-2902840-02 front strut VAZ 2110, 2111, 2112:
Item number in the picture | Explanation of the position in the picture of the front pillar of VAZ 2110, 2111, 2112 | VAZ catalog number |
1 | M8 nut self-locking | 00001-0061041-11 |
2 | Washer 8 | 00001-0005196-01 |
3 | Upper strut bolt | 21080-2901050-00 |
4 | Bolt washer | 21080-2901052-00 |
5 | Nut M12x1.25 self-locking | 00001-0061050-21 |
6 | Bolt M12x1.25x55 | 00001-0055409-31 |
7 | Lower strut bolt | 21080-2901051-00 |
8 | Right telescopic stand assembly | 21100-2901030-00 |
9 | Protective cap | 21100-2901054-01 |
10 | Protective cap | 21100-2901054-00 |
11 | Nut M14x1.5 | 21080-2901056-00 |
12 | Washer | 21100-2901032-00 |
13 | Upper pillar support | 21100-2902820-00 |
14 | Internal housing | 21100-2902826-00 |
15 | Front strut bearing VAZ 2110, 2111, 2112 | 21080-2902840-02 |
Popular manufacturers
The production of these ball bearings is established at several domestic enterprises. These are: Saratov SPZ, Vologda 23 GPP (VBF) and Samara SPZ-4. There are products labeled Kursk 20 GPZ; most likely, these are goods from storage.
The range of imported products of the same standard size is extremely wide. Products bearing the FAG, SKF, SNR and KOYO marks can be considered the best in all respects.
Do you have any questions about bearing 256907 or something to add? Then write to us about it in the comments, this will make the material more complete and accurate.
Wholesale supplies of bearings!
Flexible system of discounts depending on volume; There are certificates and passports. Own production; Complies with GOST and ISO!
Source
Generator bearing VAZ 2110, 2111, 2112
Generator rear bearing
Accepted designations:
- According to the GPP classification - 80202.
Bearing dimensions 80202 rear generator support:
- Outer diameter D - 35 mm;
- Inner diameter d - 15 mm;
- Thickness B - 11 mm.
Installation location of bearing 80202 of the rear support of the VAZ 2110, 2111, 2112 generator:
Generator front bearing
Accepted designations:
- According to the GPP classification - 80302 (6302).
Bearing dimensions 80302 front generator support:
- Outer diameter D - 42 mm;
- Inner diameter d - 15 mm;
- Thickness B - 13 mm.
Installation location of bearing 80302 (6302) of the front support of the VAZ 2110, 2111, 2112 generator:
Diameter and number of balls
Number of rolling elements in bearing 256907 – 28 pcs. These are balls of regular spherical shape with a diameter of 9.525 mm. They are made of special grades of steel (usually ShKh-15) and undergone heat treatment.
The separator can be steel, made by stamping from an alloy with a high carbon content (without additional designation), cast polyamide (E5), made of textolite (E1C17).
Attention! Some car enthusiasts consider bearings with cages made of plastic materials to be unreliable, but in reality this is not the case. Modern industry offers composites that are in no way inferior to conventional steel.
Release bearing 2110, 2111, 2112
Accepted designations:
- For VAZ - 11110-1601182-00 or 21090-1601182-00;
- According to the GPZ classification - 6-520806KECHS30 or 76-520806К1УL20Ш1.
Dimensions of release bearing 21090-1601182-00:
- Outer diameter D - 55 mm;
- Inner diameter d - 31 mm;
- Thickness B - 19 mm.
Installation location of release bearing 21090-1601182-00 VAZ 2110, 2111, 2112:
Item number in the picture | Explanation of the position in the picture of the location of the release bearing VAZ 2110, 2111, 2112 | VAZ catalog number |
1 | Clutch disc | 21100-1601085-00 |
2 | Bolt | 21080-1601207-00 |
3 | coupling | 21100-1601180-00 |
4 | Release bearing VAZ 2110, 2111, 2112 | 21090-1601182-00 or 11110-1601182-00 |
5 | Spring | 21080-1601188-00 |
6 | Slave disk | 21100-1601130-00 |
7 | Overlay | 21100-1601138-03 |
8 | Overlay | 21100-1601138-00 |
9 | Rivet | 21080-1601295-00 |
Reasons for replacing and diagnosing wheel bearing failure
In addition to driving style and road quality, the reasons for wear are the following: - quality of products; - quality of service; — weather conditions (at high temperatures, overheating and expansion occur, and the bearing is also susceptible to drying out of the lubricant). — other minor factors: serviceability of the suspension, tire profile, play in the units, alignment.
Let's look at the signs of a breakdown, there are several of them: 1. Rumble from behind when driving; 2. Vibration in the cabin; 3. Over time, the noise will turn into periodic grinding; 4. The wheel is loose when raised;
Bearing of the input shaft VAZ 2110, 2111, 2112
Transmission input shaft front bearing
Accepted designations:
- For VAZ - 21080-1701031-01 or 21080-1701031-02 or 21080-1701031-03 or 21080-1701031-04;
- According to the GPZ classification - V66-42205AEM1SH1 or 6-42205A1EUSH1 or 6-42205A1E1USH1 or 6-42205A1E1USH1.
Dimensions of the front bearing 21080-1701031-01 of the gearbox input shaft:
- Outer diameter D - 52 mm;
- Inner diameter d - 25 mm;
- Thickness B - 15 mm.
Installation location of the front bearing 21080-1701031-01 of the input shaft of the VAZ 2110, 2111, 2112 gearbox:
Rear gearbox input shaft bearing
Accepted designations:
- For VAZ - 21080-1701033-00 or 21080-1701033-01 or 21080-1701033-02 or 21080-1701033-03;
Dimensions of the rear bearing 21080-1701033-00 of the gearbox input shaft:
- Outer diameter D - 62 mm;
- Inner diameter d - 25 mm;
- Thickness B - 17 mm.
Installation location of the rear bearing 21080-1701033-00 of the input shaft of the VAZ 2110, 2111, 2112 gearbox:
Bearings for the secondary shaft of the VAZ 2110, 2111, 2112 gearbox
Front bearing of the secondary shaft of the gearbox
Accepted designations:
- For VAZ - 21080-1701180-01 or 21080-1701180-02 or 21080-1701180-03 or 21080-1701180-04;
- According to the GPZ classification - 6-42305AEUSH1, 6-42305AE1USH1, V26-42305AEMSH1, 6-42305AE1USH1.
Dimensions of the front bearing 21080-1701180-01 (6-42305) of the secondary shaft of the gearbox:
- Outer diameter D - 62 mm;
- Inner diameter d - 25 mm;
- Thickness B - 17 mm.
Installation location of the front bearing 21080-1701180-01 (6-42305) of the secondary shaft of the VAZ 2110, 2111, 2112 gearbox:
Rear gearbox secondary shaft bearing
Accepted designations:
- For VAZ - 21080-1701033-00 or 21080-1701033-01 or 21080-1701033-02 or 21080-1701033-03;
Dimensions of the rear bearing 21080-1701033-00 of the secondary shaft of the gearbox:
- Outer diameter D - 62 mm;
- Inner diameter d - 25 mm;
- Thickness B - 17 mm.
Installation location of the rear bearing 21080-1701033-00 of the secondary shaft of the VAZ 2110, 2111, 2112 gearbox:
Steering bearing VAZ 2110, 2111, 2112
Steering column bearing VAZ 2110, 2111, 2112
Accepted designations:
- According to VAZ classification - 21080-3401120-01 or 21080-3401120-02 or 21080-3401120-03;
Steering column bearing dimensions 21080-3401120-01:
- Outer diameter D - 37 mm;
- Inner diameter d - 21.65 mm;
- Thickness B - 11.5 mm.
Installation location of the steering column bearing 21080-3401120-01 VAZ 2110, 2111, 2112:
Item number in the picture | Explanation of the position in the picture of the installation location of the VAZ 2110, 2111, 2112 steering column bearing | VAZ catalog number |
1 | Steering shaft | 11180-3401160-00 |
2 | Steering column bearing VAZ 2110, 2111, 2112 | 21080-3401120-01 |
3 | Bracket pipe | 21230-3403160-00 |
4 | Installation ring | 21100-3401134-00 |
5 | Bolt M8x35 | 00001-0060426-31 |
6 | Intermediate shaft | 21100-3401092-20 |
7 | Spring washer 8 | 00001-0005166-70 |
8 | Nut M8 | 00001-0061008-21 |
9 | Tightening bolt | 21100-3403185-00 |
10 | Pinch bolt bushing | 21100-3403183-00 |
11 | Washer 8 | 00001-0005196-01 |
12 | Adjustment sleeve | 21100-3403062-00 |
13 | Adjustment lever | 21140-3403041-00 |
14 | Retaining ring | 21100-3403188-00 |
15 | Adjustment buffer | 21100-3403206-00 |
16 | Steering bracket | 21120-3403009-00 |
17 | Spring | 21100-3403061-00 |
18 | M8 nut self-locking | 00001-0061041-11 |
Upper steering gear bearing
Accepted designations:
- According to VAZ classification - 21080-3401123-00 or 21080-3401123-01 or 21080-3401123-02;
- According to the designation GPZ - ,80-903E.
Dimensions of the upper bearing 21080-3401123-00 of the VAZ 2110, 2111, 2112 steering gear:
- Outer diameter D - 35 mm;
- Inner diameter d - 17.7 mm;
- Thickness B - 8 mm.
Installation location of the upper bearing 21080-3401123-00 of the VAZ 2110, 2111, 2112 steering gear:
Steering gear lower bearing
Accepted designations:
- According to VAZ classification - 21100-3401104-00 or 21100-3401104-01;
- By designation GPZ - 1-SK152112E, NK 1512 V
Dimensions of the lower bearing 21100-3401104-00 of the VAZ 2110, 2111, 2112 steering gear:
- Outer diameter D - 35 mm;
- Inner diameter d - 17.7 mm;
- Thickness B - 8 mm.
Installation location of the upper bearing 21080-3401123-00 of the VAZ 2110, 2111, 2112 steering gear:
Item number in the picture | Explanation of the position in the picture of the steering mechanism of VAZ 2110, 2111, 2112 | VAZ catalog number |
1 | Rack bushing | 21100-3401022-00 |
2 | Ring | 21100-3401020-00 |
3 | Crankcase pipe | 21100-3401016-00 |
4 | Pipe nut | 21100-3401268-00 |
5 | Retaining ring | 21100-3401270-00 |
6 | Lock washer | 21100-3401048-00 |
7 | Support plate | 21100-3401274-00 |
8 | Frame | 21100-3401272-00 |
9 | steering gear upper bearing | 21100-3401104-00 |
10 | Steering gear housing | 21100-3401015-00 |
Differential bearing 2110, 2111, 2112
Accepted designations:
- According to VAZ classification - 21080-2303036-01, 21080-2303036-02 or 21080-2303036-03;
- According to the designation of the GPZ - 6U-7207AK, 6U-7207AK1
Dimensions of bearing 21080-2303036-01 differential VAZ 2110, 2111, 2112:
- Outer diameter D - 72 mm;
- Inner diameter d - 35 mm;
- Thickness B - 18.25 mm.
Installation location of bearing 21080-2303036-01 differential VAZ 2110, 2111, 2112:
Item number in the picture | Explanation of the position in the figure of the differential VAZ 2110, 2111, 2112 | VAZ catalog number |
1 | Main drive driven gear | 21080-2302060-30 |
2 | Differential bearing VAZ 2110, 2111, 2112 | 21080-2303036-01 |
3 | Adjustment ring | 21080-2303090-00 |
4 | Axle shaft seal left | 21100-2301035-00 |
5 | Axle shaft seal, right | 21100-2301034-00 |
6 | Driven gear bolt | 21100-2403021-00 |
7 | Front axle differential | 21080-2303012-00 |
Timing belt tensioner bearing
Accepted designations:
- According to VAZ classification - 21080-1006120-00, 21120-1006120-00, 21120-1006120-01, 21120-1006135-00, 21120-1006135-01;
Dimensions of bearing 21080-1006120-00 of the timing belt tensioning mechanism VAZ 2110, 2111, 2112:
For 21080-1006120-00:
- Outer diameter D - 63 mm;
- Inner diameter d - 10.1 mm;
- Thickness B - 27 mm.
Or for 21120-1006120-00, 21120-1006120-01, 21120-1006135-00, 21120-1006135-01:
- Outer diameter D - 63 mm;
- Inner diameter d - 10.1 mm;
- Thickness B - 32.4 mm.
Installation location of bearing 21120-1006120-00 of the timing belt tensioning mechanism VAZ 2110, 2111, 2112: