Passport data of the car VAZ "OKA" 1111 1988-2008

Repair of VAZ VAZ OKA: Vehicle data sheets

Technical characteristics of cars of the Oka family

The model and number of the vehicle, engine model, name of the manufacturer, options and configurations are indicated on the identification plate (Fig. 1.4).

The identification plate is secured with tear rivets in the engine compartment on the upper front cross member.

The identification number is duplicated by stamping on the rear floor cross member on the right (under the rear seat) and on the water deflector (it can be seen through the heater air intake slots on the bottom of the windshield frame).

– first three letters (XTJ) – manufacturer’s index:

geographical area (X - Europe);

country (T - Russia);

manufacturing plant (J - JSC "Serpukhov Automobile Plant");

– the next six digits (111130) – car model;

– (1) – code of the model year of the vehicle (see Table 1.1);

– last seven digits (0055709) – car body number.

Technical characteristics of cars of the Oka family

VAZ-1111-11113 OKA

Section 1. VEHICLE STRUCTURE General information about cars Vehicle registration data

Section 2. ENGINE Possible engine malfunctions, their causes and solutions Useful tips Replacing the coolant Replacing the engine oil and oil filter Cleaning the crankcase ventilation system Setting the piston of the first cylinder to the TDC position of the compression stroke Adjusting the tension of the camshaft drive belt Replacing the tension roller Replacing the drive belt camshaft Removal, installation and troubleshooting of the flywheel Replacement of engine seal parts Cylinder head Adjustment of clearances in the valve drive Removal and installation of the engine Engine repair Lubrication system Cooling system Exhaust system Power supply system

Section 3. TRANSMISSION Clutch Gearbox Front wheel drives

Section 4. CHASSIS Front suspension Rear suspension

Section 5. STEERING Inspection and check of the steering on the vehicle Steering column Steering mechanism Steering linkage

Section 6.BRAKE SYSTEM Checking and adjusting the brake system Replacing the brake fluid Bleeding the brake system hydraulic drive Master brake cylinder Vacuum brake booster Pressure regulator Replacing brake hydraulic hoses and pipelines Front wheel brakes Rear wheel brakes Parking brake

Section 7. ELECTRICAL EQUIPMENT Fuses and relays Generator Starter Ignition system Lighting, light and sound alarms Windshield wipers and washers Engine cooling fan Instrument cluster Switches and switches

Section 8. BODY Possible body malfunctions, their causes and solutions Replacement of buffers Hood Side door Rear door Rear view mirrors Seats Heater Body care

Applications Appendix 1. Tightening torques for threaded connections Appendix 2. Fuels and lubricants and operating fluids Appendix 3. Basic data for adjustments and control Appendix 4. Filling volumes, l Appendix 5. Oil seals Appendix 6. Layout of rolling bearings Appendix 7. Electrical equipment diagram car: 1 - side turn signal repeater; 2 — front direction indicator; 3 - headlight; 4 — electric motor of the cooling system fan; 5 — sound signal; 6 - sensor for turning on the electric motor

Our data is used

See how the service works

• It is enough to know the license plate number
• Verification takes only 5 minutes
• You can even check Japanese cars
• More than 13 official sources

We will refund the money on the same day if the report contains incorrect information

Thousands of buyers and sellers trust us to verify

They're checking now

More than 2,600,000 inspections per year

Our sources

• traffic police
• Russian Union of Auto Insurers
• Credit Bureau
• FSSP
• Courts of the Russian Federation
• Notary Chamber
• Banks
• Insurance companies
• Car dealers
• Federal Customs Service of the Russian Federation
• Notice boards

Try mobile AutoCode

Convenient to take to a car deal or inspection

The entire history of checks on the website and application

Payment is made in any convenient way

Help and advice from 09:00 to 21:00 Moscow time 8

Reviews

I constantly check my car at work. Very convenient service. All reports are stored in your personal account. You can send a link to the report. You can check it via the app right on the spot. The price has become favorable - only 100 rubles per report if you buy the Outpurchase package.

I accidentally decided to check the car before selling it. I saw traffic police restrictions that I didn’t even suspect about. At first I thought that the service was lying. I started to figure it out. It turned out that several years ago I received a fine that I did not pay. The fine turned into restrictions. I paid off the debt and the report became clean.

I checked all the cars before going for inspection. Half was cut off. Either accidents, or repairs, or restrictions. Just in case, I checked the selected option again before purchasing. For me, it’s better to spend 349 rubles on an inspection than to later invest in repairs or go through the courts.

I checked the KIA RIO. I was afraid that the seller was hiding something. I have heard about how, after buying a car, people cannot register it. But the car I bought turned out to be clean. I liked that the report arrived very quickly. It seems to me that not even 5 minutes have passed.

FAQ

To receive a report with the vehicle history, it is enough to know the license plate number or VIN code of the car.

Main advantages of the service:

• • Verification takes only 5 minutes
• • It is enough to know the license plate number
• • You can check right-hand drive Japanese cars
• • More than 13 official sources (State Traffic Police, EAISTO, Federal Customs Service, Federal Tax Service, banks, car dealers, etc.)
• • Maximum data about the car: from restrictions and fines to mileage and repair history
• • Technical support 8,800
• • Applications for IOS and Android

In the search bar on the main page, enter the license plate number or VIN, click the “Check car” button. After this, a short report about the car will open. To get complete information, enter your e-mail and pay.

We provide up-to-date information that is available in source databases at a given time.

Yes, you can check the history of a deregistered vehicle.

If the VIN number is missing or does not meet the standard, you can check the car by license plate.

The Autocode service receives data from government and commercial sources: the State Traffic Safety Inspectorate of the Ministry of Internal Affairs of the Russian Federation, the Federal Tax Service, the Federal Customs Service, taxi registries, large banks, insurance companies and others.

The report contains the following information:

• • year of issue,
• • number of owners,
• • mileage,
• • pledges,
• • information about the theft,
• • traffic police restrictions,
• • use in taxis,
• • participation in an accident,
• • repair work,
• • leasing,
• • disposal,
• • customs history,
• • data on compulsory motor liability insurance,
• • history of fines,
• • changes in vehicle design,
• • data on technical inspections.

The license plate is installed on the rear and front bumpers of the car.

This is a unique vehicle number consisting of 17 characters, divided into 3 parts - the worldwide manufacturer index (3 characters), the descriptive part (6 characters) and the distinctive part (8 characters). Common locations: under the windshield, on the left of the dashboard and on the driver's door.

Yes, you can. This information is reflected in the “History of registration actions” and “Ownership periods” blocks. There you can see the date and region of the car's last registration. Information is provided according to the traffic police.

According to Federal Law No. 152 “On Personal Data”, we do not have the right to provide personal data. Personal data includes full name, place of residence, passport data, etc. The full report indicates the status of the owner: individual or legal entity.

Technical characteristics of SeAZ (Oka, VAZ) 11116, 1111, 11113 - Remont-Avtovaz.ru

In 1988, an especially small class car, the VAZ Oka, rolled off the AvtoVAZ assembly line. Subsequently, production was transferred to other factories, but the Serpukhov plant became the main one, with the corresponding model designation - SeAZ. But at the same time, the name of the model, “Oka,” remained unchanged.

The first model was the basic one and it had the Oka index 1111. Subsequently, several more models appeared that received improved technical characteristics and other indices. The most popular of them were models with indexes 1113 and 11116.

Production of this car stopped in 2008. Being practically the smallest domestically produced car, the VAZ 1111 had quite good technical characteristics for its class.

Vehicle identification

Like all cars, the Oka had identification numbers applied to the body and engine. The body number was additionally an identification designation of the car itself.

The identification number was applied to the car body in three places, which eliminated the possibility of counterfeiting. The first number was applied to a special plate attached to the front of the body, in the engine compartment. This plate also carried information in the form of a code about the manufacturer; the model index and model year of manufacture were applied to it.

The identification number was additionally applied to the body under the air intake grille located near the windshield.

The third number was applied inside the cabin, on the cross member of the trunk floor.

The engine had an identification number in only one place - on the front cylinder block, next to the second cylinder.

Dimensions

All versions of the car had a monocoque three-door body, and the car was designed for 4 passengers. Despite the fact that three different models were produced, their overall dimensions were identical. The length of the car was only 3200 mm, with a width of 1420 mm, and almost the same height - 1400 mm. At the same time, the wheelbase of the Oka was 2180 mm. The ground clearance for all models was 150 mm. But they differed in curb weight: 1111 had a weight of 640 kg, 1113 had 645 kg, and 11116 had 665 kg. The use of engines with different design features had an effect.

Engines and transmissions

The Oka engine had different characteristics, depending on the model. Oka 1111 and 1113 were equipped with two-cylinder power units with synchronous piston stroke and a balancing mechanism. The power system is carburetor, cooling is liquid, and the ignition system is electronic non-contact, using a Hall sensor.

For Oka 1111, the technical characteristics of the engine were reduced to a total volume of combustion chambers of 0.649 liters and a power of 29.3 hp. In fact, it was half of the 1.3-liter engine of the VAZ-2108 model.

The SeAZ-1113 had a larger volume - 0.75 liters, and the power was also higher - 33.0 hp.

SeAZ 11116 had slightly different technical characteristics. This model, which appeared later than all others, was equipped with a Chinese power plant with 3 cylinders. The working volume of this unit was already 1.0 liter, and the power it produced was 53 hp.

Article on the topic - Design of the OKI (SeAZ) engine

All cars were front-wheel drive. On versions 1111 and 1113, a 4-speed gearbox was used, equipped with synchronizers for each gear.

The maximum speed of Oka 1111 was 115 km/h, and 1113 – 130 km/h.

The Chinese engine version 11116 was already paired with a 5-speed gearbox. This made it possible to accelerate the car to 150 km/h.

Suspension, steering, braking system

The front of the car was equipped with a MacPherson-type suspension, with telescopic shock absorbers, wishbones and a transverse stabilizer bar. At the rear, a suspension was used, consisting of shock absorbers, coil springs, trailing arms and a transverse beam.

Steering "Oka" ...

injury-proof, made of the “rack and pinion” type. The transmission of force from it to the wheels was carried out by two steering rods.

The front wheels were equipped with disc brakes...

the caliper was movable. The gaps between the caliper and the pads were adjusted automatically.

The rear wheels had drum mechanisms; the gap between the shoes and the drum was adjusted automatically. The drive of the service brakes was hydraulic, while the parking brake had a cable drive.

Article on the topic - OKA suspension: diagnostics and malfunctions

On-board electrical network…

the car was single-wire, the negative pole was the body itself. The nominal voltage in the network was 12 V. The voltage in the network was maintained by two sources - the battery and the generator.

In general, the Oka car was very interesting, but the unprofitability of production and lack of competitiveness with foreign cars of this class led to the curtailment of its production.

Video - Test drive Oka “truck” SeAZ

Designations

The very first characters in the VIN code indicate the country of manufacture of the car, as well as the manufacturing company. Let's look at the example of Japanese cars, where the first letter in the code will be " J"

«.

For example, the combination " JT"

at the beginning of the VIN will indicate Japanese
Toyota
,
“JS” - Suzuki
,
“JN” - Nissan,
and so on.
Sometimes the manufacturer is designated not by two, but by three letters: “ JMZ” - Mazda
.

A few examples in the case of motorcycles: " JYA" - Yamaha

,
"JK" - Kawasaki
,
"JH" - Honda
.

Important:

The first letter is
“J”
only if the vehicle is manufactured in Japan. If the equipment was produced in another country, then the first symbol will be different.

In VINs of Russia

and
the USSR
the first character is
“X”
, Ukraine -
“Y”
, China -
“L”
, Korea -
“K”
, Germany -
“S”
or
“W”
.

Vehicle registration details

Technical characteristics of cars of the Oka family

The model and number of the vehicle, engine model, name of the manufacturer, options and configurations are indicated on the identification plate (Fig. 1.4).

The identification plate is secured with tear rivets in the engine compartment on the upper front cross member.

The identification number is duplicated by stamping on the rear floor cross member on the right (under the rear seat) and on the water deflector (it can be seen through the heater air intake slots on the bottom of the windshield frame).

– first three letters (XTJ) – manufacturer’s index:

geographical area (X - Europe);

country (T - Russia);

manufacturing plant (J - JSC "Serpukhov Automobile Plant");

– the next six digits (111130) – car model;

– (1) – code of the model year of the vehicle (see Table 1.1);

– last seven digits (0055709) – car body number.

VIN number for a foreign-made car

In order to better protect a vehicle from theft, manufacturing plants of both domestic and foreign cars duplicate numbers in several places on the vehicle. For example, on American cars you can most often see the VIN on the windshield, where it touches the hood. The Americans also duplicate it on the nameplate in the driver's door opening or in other areas of the body.

On German cars, as in the case of Russian cars, the location depends on the year of manufacture. Especially when it comes to BMW. If we take the “troika” in the back of the E36 as an example, then there are as many as 13 possible places for applying the VIN code, starting from the bumper beam under the decorative panel and ending with the frame of the front seats. But on the X5 it is located in a small box under the hood on the right side. In the same places you can find the VIN on a Volkswagen, and on a Mercedes-Benz the number is usually hidden in the window on the windshield.

On Asian cars, the number is most often located on a plate located on the lower part of the B-pillar of the driver's doorway. Traditional application areas also include the cylinder head and engine compartment. The same answer can be given to car owners who are interested in where the body number is located on Renault and other European-made brands. Especially if the car is new. In this case, if it is not in the window on the windshield, the easiest way is to look in the doorway or under the hood.

Where is the body number on the Oka Link to the main publication

• Rent a paint thickness gauge

Body number: plate features, definition and much more

What is the body number? This is a special identification code applied to the body of a specific car. The developers in this case pursued a single goal: to uniqueize the body, creating a primitive but very effective method of protection. We will learn more about the body number from the article.

Features of the VIN code: what is a check number

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

So, VIN, as the dedicated vehicle identification number is also called, has a certain structure. As a rule, this is always a code consisting of numbers and Latin letters.

It will be useful to know that numbers are applied mainly to those areas of the body that are integral. They write, or more correctly, knock out the code on a special plate or nameplate.

Dimensions of Japanese car license plate

Vin is not a chaotic collection of alphanumeric values, as some people imagine. Each given value is encoded data about some element of the car.

It will also be useful to know that Vin consists of 17 characters of alphanumeric values ​​in which letters like I/O/Q never collide.

In the code there is also the concept of CN position. It is calculated by comparing other code values. It is this very calculation of the CN that becomes extremely effective when uniqueizing the number. Thanks to the check number, the vehicle body is protected from having the number plate interrupted.

Note. To better understand the above, let’s imagine a situation where a criminal wants to interrupt a number. In this case, all numbers are rarely replaced, and the hijacker is limited to only replacing some characters, especially those that are somewhat similar in appearance. For example, 3 and 8. And here the problems begin, because adjusting the changed values ​​to the control number turns out to be an extremely difficult task.

It will be useful to know that when compiling VINs, all American car manufacturers, as well as auto companies that directly export their models to the States, follow the standards for calculating the CV. But Japanese manufacturers, such as Mitsubishi, Toyota and others, on the contrary, do not adhere to this, as do European, Korean and Russian automakers.

Where is the license plate on Sobol and Kalina cars?

Many people are interested in the location of the plate with the number. Let's take a closer look at where it is located on domestic cars.

The passport data of the Sobol car includes the Vin number. As you know, the sable has an all-metal body, and a plate with a code is applied to it in 2 zones of the outer panel of the front part of the car: directly under the hood on the passenger side and in a similar place, but on the driver’s side. The photo clearly shows that the letter A indicates the VIN code of the vehicle, and the letter B indicates the location where the body or cabin ID is applied.

VIN code for a Sobol car

If cars have a platform, then the VIN plate can also be applied to the right side member of the frame.

On the popular Kalina car, the plate with the number is stamped in several places.

ID number of Kalina on the radiator grille

About the sign

A duplicate data plate is required on any vehicle, as it allows you to find important information in the event of damage and unreadability of the main plate.

To be precise, Vin is mostly applied to the following areas of the car.

1. Body. As a rule, if we are talking about a “passenger car”, then in 2 places of the car frame - on the front and rear.
2. If it is a bus, then the plate with the number is again applied to the body, only in this case in different places (as a rule, again 2 places).
3. If it is a trolleybus, then Vin is applied only in one place of the body.
4. As a rule, on the cabins of trucks and forklifts the plate is knocked out in just one place.
5. If we are talking about a semi-trailer and motorized vehicles, again, the plate is knocked out in one place.
6. On SUVs, forklifts and trolleybuses, the plate can be stamped on a separate area.

The passenger car plate, stamped on the front of the body, should contain as much information as possible. In particular, there must be information about the car model, body make, engine, permissible weight, and so on.

How to fix missing number

What to do if you become the owner of a car on which it is impossible to subtract the license plate or it is missing? Such a purely numberless body. Is it possible to do anything in this case?

As a rule, an expert audit is appointed in such cases. Any briefing with a government representative may be a reason to order an audit and determine further actions. In this case, the body number may be rusty, mechanically damaged, etc.

Examination of the number according to the traffic police database

The examination can be carried out either at the post of a traffic police inspector, or during regular maintenance. Frequent cases of examination: registration/deregistration of a car.

On certain vehicles, plates are located in areas where they are most exposed to aggressive environments: saline-water solutions and so on. In such conditions, it is not possible to keep the number intact - as a result, the necessary information is missing.

As a rule, the inspector, having noticed the picture, issues a referral for examination to determine it. Documents for the car are confiscated on suspicion of broken numbers, but later, after checking everything falls into place, the inspector issues authorization based on the results of the audit.

The owner of the car with these papers goes straight to the point listed in the documents, where he is given a coupon indicating the date of the procedure. Before the audit begins, everything that, in the opinion of experts, will interfere with the study of the license plate is removed from the engine compartment.

As a result, after experts have applied various chemical compositions or found duplicate plates and identified them, the car owner is given an official resolution, with which he can safely go to the traffic police. If the plate could not be read, and no duplicate numbers were found, you will have to wait for the results of the examination for several days.

As a rule, if it is proven that the number is missing due to corrosion due to time, no criminal case will be initiated. A photo of the damaged license plate is pasted into the PTS, and a corresponding note is made.

Find out more about the features of the body number from other articles on our site. Read interesting recommendations for repairing and restoring body parts.

Tired of paying fines? There is an exit!

Forget about fines from cameras! An absolutely legal new product - Traffic Police Camera Jammer, hides your license plates from the cameras that are installed in all cities. More details at the link.

• Absolutely legal (Article 12.2);
• Hides from photo and video recording;
• Suitable for all cars;
• Works through the cigarette lighter connector;
• Does not cause interference to radios and cell phones.

Is the car engine a spare part? No, this is a numbered unit! Checking the engine number.

I often hear from drivers the careless “The engine is a spare part!” If it knocks, I’ll buy the engine from disassembly.” But today the engine number is strictly checked by a criminologist at the inspection site at the traffic police. The engine became recognized as a numbered unit. The article is required reading for all drivers who want to purchase a car on the secondary market.

1. How to check

engine number when buying a car?
2. How and what kind of engine should you buy
if it breaks down in your car?

1. When buying a car, you must definitely ask the seller to show the title and the area with the engine number. The model and its number must match the number in the documents. If the seller refuses to do this, then immediately refuse to buy such a car.

If you find that the engine number is illegible or destroyed, then it is better to choose another car for purchase, because car registration is regulated by Order of the Ministry of Internal Affairs of Russia dated June 26, 2022 N 399 “On approval of the Rules for state registration of motor vehicles and trailers for them in the State Road Safety Inspectorate of the Ministry of Internal Affairs of the Russian Federation, a sample form of a certificate of vehicle registration and invalidation of regulatory legal acts of the Ministry of Internal Affairs of Russia and certain provisions of regulatory legal acts of the Ministry of Internal Affairs of Russia,” which clearly states:

General provisions. Clause 3. Not subject to registration

in the State Traffic Inspectorate and registration actions are not carried out with vehicles on the following grounds:
signs of concealment, falsification, alteration, destruction of
vehicle identification numbers, numbers of components and assemblies (body, frame, cabin,
engine
) identifying the vehicle were detected, or forgery of submitted documents , non-compliance of vehicles and numbered units with the information specified in the submitted documents or registration data, as well as in the presence of information about the presence of vehicles, numbered units on the wanted list or the submitted documents among the lost (stolen),
with the exception
of vehicles with changed markings of vehicles funds and numbered units
as a result of natural wear and tear, corrosion, repairs or returned to the owners or holders after theft
, subject to their identification.

If you have already purchased a car with a replaced engine, then the criminologist, when registering the car with the traffic police, will write it down on a piece of paper and check it with the Ministry of Internal Affairs databases, and what car did this engine belong to? The problem is that you won’t be able to find out this information on your own in advance.

If the engine belongs to a car on which the bailiffs have imposed restrictions on registration actions

, then the inspector
will refuse to register the car
and ask you to replace the engine with another one.

If the engine belongs to a car that is on the wanted list

(that is, it was stolen), then you will go home on foot, because an employee of the Ministry of Internal Affairs will draw up a report, the car will be sent for examination, and in the future the question of
initiating a criminal case
. And it is virtually impossible to prove the fact of an honest purchase of a car. If you arrive with a stolen engine, you will be held accountable by law.

If you bought a car with an unreadable or destroyed engine number, the car will also be sent for examination, as a result of which the number will either be recognized as destroyed naturally

(corrosion, photo above), or they admit that the engine belongs to a stolen car (the consequences are also indicated a little higher)

2. A reliable and safe way to buy an engine is to purchase a contract engine

similar model with documents.
It will be legally clean, so you can safely install it in your car as a replacement for a faulty engine. After such a purchase, be sure to save the documents! When you sell a car with a replacement engine, you can show the buyer that you purchased it honestly and legally. When registering such a car, the buyer will hear from the inspector at the traffic police during the inspection of the car something like: “The engine is in order, its new number will be indicated in the “special notes” field
in your PTS.”

Conclusion: When buying a car, check its engine number. If the number differs from that indicated in the PTS, then ask the seller for documents for the engine. Refuse to buy a car: if the seller does not have such documents, if the engine number is illegible or destroyed. When purchasing an engine, avoid engines that have been dismantled without documents; invest in a contract engine.

Thanks for reading. If the article was useful, then give it a thumbs up, thereby helping other readers familiarize themselves with it. You have questions? My profile on VK, Instagram, page on Avito. Best regards, Bogdan.