Car seats in all cars are primarily designed to carry passengers, thanks to their special anatomical shape and softness. However, the rear seat in tandem with the trunk can also be used as a place for transporting large cargo and other things. In this article we will take a detailed look at the design of the rear seat and the procedure for dismantling it to increase space and cargo.
Purpose and design of the rear seats
The voluminous design in the form of a wide cushion for seating and a backrest with soft filling provides all passengers with a comfortable position in it.
These elements are very rigidly fixed inside the cabin, and the profile, rigid frame on the back is not only designed to increase elasticity, but also to hold the padding inside it. The backrest can be folded, increasing the space in the rear of the car.
Headrests
The rear seats are equipped with another element that is responsible for the comfortable position of passengers in the cabin - head restraints . There are two of them in the back seat, and they are installed on the left and right sides, which allows them not to interfere with the driver’s view in the rearview mirror.
To make it easier to unfold or dismantle the chair, you must first remove the headrests, adjusting their position with special pins.
This is what the headrests on a Niva Chevrolet look like.
note
There are a few simple recommendations when transporting large cargo on the folded rear seat. Most of them are dictated by ordinary common sense. For example, if the cargo you are transporting is unevenly heavy, then try to place the heaviest part of it in the trunk. The improvised stiffener, which we wrote about above, certainly helps, but it does not guarantee 100% safety of the seats. If the load is heavy at any point, try to position it so that the load falls more on the surface of the trunk floor. If possible, the load should be secured. For this you can use, for example, belts or blankets. Well, or support it with another, smaller load.
Manufacturers often promise a “flat floor” when the seats are folded down. Some, of course, keep their promise. But for many, the floor will not be completely level. Therefore, again, if possible, place unstable cargo (buckets with liquid, boxes with bulk mixtures, etc.) so that it does not have room to move. In general, as we said, these rules are determined only by common sense and are intuitively understandable.
Rear seat removal process
It may be necessary to dismantle the rear seats for several reasons, such as the need to replace some parts, modernize them, install covers, or reupholster the seats in general.
Step-by-step removal procedure
- Open the trunk door and remove the rubber mat.
Trunk mat and trunk itself on Niva Chevrolet.
How to fold the rear seats to create a sleeping area
I offer a convenient option for transforming the interior of a seven-seater Largus. Fold the backrests of the second row seats and raise the cushion until the back of the backrest is in a horizontal position. We fix this position using, for example, a rolled up jacket or blanket.
We do the same with the third row. We fill the space between the seats and the trunk with belongings.
If there are not enough things, cover the gap between the rows with a sheet of plywood measuring 500x700x6 mm. The length of the berth is maximized, and there is no need to shift luggage if you need to change your place of overnight stay.
How to fold out the rear seats on a Chevrolet Niva
If from all of the above it became clear to you that the entire seat can be easily removed from the interior, it can also be simply unfolded.
In order to do this, you need to find a special lock that holds it in a locking position, pull the loop and release the lock. However, before this, make sure that there is free space under the backrest; to do this, we slightly raise the backrest and move it straight to the front seat, and the backrest simply reclines, thereby providing free space for transporting all kinds of cargo.
Second row rear seats: functionality
To fold the seats
Remove the head restraints if the vehicle is equipped with them.
Pull handles 1 and lower the seat backs.
When transporting bulky items, the rear seats can be folded down.
Pull strap 2 to raise the seat cushion to a vertical position.
For safety reasons, make all seat adjustments only while the vehicle is stationary.
Check the rear seat belts for proper installation and operation each time the rear bench seat is moved.
- fold down the seat backs;
- by pulling the belt 3, lift the seat cushion to a vertical position;
- open latches 4 and 5;
- lift the seat up.
To install the seats
- lower the seat cushion until it locks;
- raise the backrests;
- Make sure the seat cushions and backrests are securely fastened.
When moving the rear seats, make sure that there are no objects in the fastening area (there should be no stones, rags, toys, etc.).
conclusions
To sum up all of the above, we can confidently say that in order to make more space in the back seat of a Niva Chevrolet, you don’t need much experience, the main thing is to carefully read our article.
I often have to go on business trips for work, but it’s not always possible to rent a room or a hotel room, so I often have to spend the night in the car. But sleeping in a Chevrolet Niva is not very comfortable, because the seats do not fully recline. In the morning my back hurts as if I had been loading cars all night. But to finalize it, we only need five minutes of time, no more. I tried to sleep on the back sofa, but it’s the same story, you have to bend over backwards, so you can’t get enough sleep.
After this, we move the seats as far forward as possible and remove the headrests. After this, we lower the back of the seat along the board, and at the same time raise the chair cushion. What else? And nothing else is needed, the modification of the front seats is completed, you can immediately experience the result for yourself.
We also don’t leave the rear sofa without attention. We take a 13-size wrench plus a screwdriver with a reversible head, onto which we place the 13-size head. If you don’t want to suffer in the future, then I recommend replacing the regular nuts with wing nuts, so that later you don’t need a wrench, you can unscrew them with your bare hands.
Folding out the front seats of the Prado
The front seats are adjusted using the following levers:
- position control knob - it can be moved forward or backward along the plane;
- backrest angle adjustment;
- height control (option available only for driver);
- lumbar support adjuster (also exclusively for the driver).
To facilitate the process, an electric drive is installed in the cars; unfolding is carried out using switches that set them in motion. Each of them is responsible for the same adjustment as the manual levers.
The front seats fold out like this:
- From the folded position (the backrest is horizontal), push the structure back with the control lever until it stops until the driver hears a slight click.
- Using the backrest tilt adjustment, recline it to the desired position.
In a three-door model, if the driver needs to seat passengers in the second row, the front seats will need to be folded down.
Chevrolet Niva | Reclining seats | Chevrolet Niva
Niva Chevy. The lock of the rear seat back is jammed. Disassembly
In order to do this, you need to find a special lock that holds it in a locking position, pull the loop and release the lock.
On a Chevrolet Niva, the rear seat is a removable structure consisting of a backrest and Important!…
To disassemble them, you need to pull the latches. This circumstance allows you to freely use the work, while respecting personal non-property rights - the right of authorship, the right to a name, the right to protection from any distortion and the right to protect the author's reputation - since these rights are protected indefinitely.
As a rule, they have an L-shape, which allows you to select the optimal height position and, when recessed, are almost completely hidden without obstructing the driver’s view.
Video instructions: how to fold out the rear seat of a Chevrolet Niva
Owners of Niva Chevrolet from time to time complain about such an unpleasant situation as the failure of the backrest lock. Despite the fact that the price barely exceeds rubles, a breakdown at the most inopportune moment will leave the most unpleasant sensations. Therefore, it is sometimes worth paying increased attention to this part, and at the slightest sign, replace it, and this is done as follows: The old lock must be dismantled, having first unscrewed two bolts from its body.
Next, loosen its clamps and remove it from its seat. We insert the new part in the same order as removal. Conclusions Summarizing all of the above, we can say with confidence that in order to make more space in the back seat of a Chevrolet Niva, you don’t need much experience, the main thing is to carefully read our article.
After this, using a 8 key, unscrew the rear seat fastenings.
Shniva. How to organize a sleeping place in a Chevrolet Niva. Chevrolet Niva.
Then the bolts of the slide located in the middle part are unscrewed. A spring washer will be located under it. After this, you can remove the seat from the passenger compartment and, if necessary, dismantle or repair the front slide of the Chevrolet Niva. In order to remove the slide, you need to unscrew the bolt that secures it to the seat. Now you can unscrew the rear bolt securing it to the seat. If necessary, the slides can be lubricated or replaced with new ones.
How to fold the front seats
The process of folding the front seats is simple. It is similar to unfolding only in reverse order:
- Pull the backrest tilt adjustment lever with your left hand (if on the driver's side) until it stops.
- With your other hand, place it on the bottom pillow.
- Move the folded structure all the way forward towards the steering wheel until you hear a click.
This frees up the passage to the second row. Moving and tilting seats in a car must be done carefully; passengers or the driver should not be close to the position changing mechanisms.
It is not recommended to change the condition of the seats while the vehicle is running. Be careful with your fingers - do not place them in the device under the chairs while they are moving - you can seriously injure them.
A car enthusiast can imagine how the whole process happens by watching a video on how to fold the rear seats on a Toyota Land Cruiser Prado 150.
