Selecting and replacing an oil filter for a Lada Priora car

How to choose an oil filter for Priora? The answer to this question depends on many factors. Drivers have different attitudes towards cars produced by AvtoVAZ. Nevertheless, Lada Priora is one of the most popular brands. It is available in several body types: sedan, hatchback and station wagon. According to the classification adopted in Europe, the car belongs to the C class.

Lada Priora was developed on the basis of the VAZ 2110 and is a restyled model of the famous “ten”. Over the years of production, the car has undergone a number of changes. In particular, three models are produced under the Priora brand: 2170 (sedan), 2172 (hatchback), and 2171 (station wagon).

The basic configuration of the Priora includes impressive options, for example, electric windows, airbags, electric power steering, central locking, which has a remote control type, and height adjustment of the steering wheel. If we compare this car with previous models that came off the AvtoVAZ assembly line, it is significantly better than its predecessors.

Oil filter for Priora 8 and 16 valves

Regardless of whether the Lada Priora has an 8 or 16 valve engine, the car is equipped with the same oil filters. In the original configuration, filters from 2 manufacturers :

• LADA 2108-1012005-08 – . Cost – from 160 rubles. Has a lot of negative reviews. The main disadvantages are oil leakage along the rolling contour and low quality filter paper.

• Salute 2108-1012005-010 – . Average price - from 160 rubles. It has an original bypass valve design, which ensures constant oil flow through the filter, even when the filter components are clogged. Reviews about this filter model are different. The main disadvantage is the poor quality of filter paper. It often breaks during operation. Also uneven placement of the filter element.

Oil filter Salyut 2108-1012005-010

Dimensions of the original oil filter Lada Priora

When choosing an oil filter for LADA Priora, you should pay attention to the following substitutes:

• BIG Filter GB-102M . Price – from 120 rub. Manufacturer: Russian company BIG Filter. A popular substitute among Lada Priora owners. According to customer reviews, the quality is above average. Among the shortcomings is a weak rubber sealing ring.
• FRAM PH5822 Price – from 170 rub. Reviews about this filter model are both positive and negative. The main disadvantages are that the filter element has a small total area and is not dense enough.
• Mann W914/2 Part price – from 170 rubles. High-quality foreign analogue for Priora. Customer reviews are only positive. It has good quality synthetic filter paper, as well as an opening pressure of the bypass valve of 1.2 bar.

Which air filter is better?

For LADA (SHIGULI) 2170 (Priora) 1.6, MANN recommends the following filters: C 22 117. Detailed characteristics of these filters can be found in our catalog.

Replacement intervals

from 30 to 60 thousand km, depending on the manufacturer’s recommendations.

Air is a necessary condition for the combustion of fuel in the engine cylinders. In the LADA (SHIGULI) 2170 (Priora) 1.6, as in other cars, this air is taken from the street and, of course, it is highly undesirable for foreign particles to get in with this air. To ensure clean air enters your engine, you need an air filter. Many people forget that the air filter also requires replacement every 40 thousand km under normal operating conditions. MANN air filters are leaders in air purification for your engine. And when answering the question of which air filter to install on the LADA (SHIGULI) 2170 (Priora) 1.6, we definitely answer -MANN. Below is a selection of air filters from the above-mentioned company for your car.

Choosing a Lada Priora oil filter

Many VAZ-2110 car owners often have disputes about which oil cleaner (hereinafter referred to as MF) is better to install: with a long or short skirt.

Don’t worry, both filters are compatible with the AvtoVAZ 2110 model. They were installed with a long skirt until 2013, and with a short skirt - starting from 2014. The parts are interchangeable with each other, the dimensions and parameters are identical.

Manufacturers: domestic and foreign.

Replacing the oil filter yourself is not difficult; it is quite feasible for a driver without vehicle maintenance skills.

Selection of MANN filters for LADA (SHIGULI) 2170 (Priora) 1.6

MANN is one of the leaders in the production of filters for various automotive components. MANN gives the following recommendations for LADA (SHIGULI) 2170 (Priora) 1.6.

Table of contents

Below we will look at which MANN filters can be used in various LADA (SHIGULI) 2170 (Priora) 1.6 units. When the time comes to replace one or another filter on a car, the car owner one way or another has a question: which filter to choose or which filter is better for my car, and some do not even know which filter to buy. We have posted a selection of MANN filters on our website and will answer which filter will be the most optimal.

Good non-original filters: articles, price

Specifications (size):

• outer diameter: 86.5 mm;
• screw thread: M20x1.5;
• internal diameter: 58.4 mm.

How to distinguish a fake from an original filter

You can purchase consumables, including MF, in various places, namely:

• at the car market;
• in a specialized store;
• in online catalogues;
• through intermediaries.

Given the breadth of choice, for an inexperienced owner the risk of purchasing non-original products increases due to insufficient knowledge of unmasking factors.

When selecting consumables, be sure to check the availability of:

• and integrity of branded cardboard packaging;
• holographic protection from the front of the package;
• factory stamp with batch number, date of manufacture, country of origin;
• rubber seal on the inner diameter of the MF.

When purchasing, check for a quality certificate or other documentary materials indicating the origin of the product. If in doubt, refuse.

Reviews

Yaroslav Anatolyevich, 44 years old, Slavyansk: I bought a VAZ (Lada Priora) two years ago, the car is good, no comments. I take care and follow the maintenance schedule. Before visiting a service station, I always purchase consumables. In particular, I always take fuel and oil filters with original serial numbers (H90W03, H90W27). My comrades buy high-quality analogues, they are cheaper. I believe that there is no need to cheapen consumables.

Dmitry Nikolaevich, 41 years old, Astrakhan: bought a VAZ car secondhand, got it from the previous owner in good condition. During two years of active operation there were no serious breakdowns, only scheduled maintenance. I don’t buy original filters, I limit myself to high-quality analogues, they are a third cheaper. I always order from the online store, it has been tested over the years, my recommendations to motorists.

Denis, 35 years old, Melansk: I don’t trust analogues, I always buy factory products and consumables (H90W03, H90W27). I believe that what is prescribed by the manufacturer is most compatible with the model of my car. I bought third-party products several times, I didn’t like it, the LED lamp on the dashboard burned for a long time.

Alexey Vladimirovich, 42 years old, Voronezh: I carry out the technical inspection on my own. As for consumables, I always take originals with factory serial numbers so that the engine lasts longer and breaks down less often. I buy spare parts in a specialized store, they are always of high quality and come with a guarantee from the manufacturer.

Leonid, 33 years old, Aktyubinsk: bought a Lada Priora car second-hand, the previous owner installed non-original consumables (C-1823, W 7053, LC-1400). I didn’t change it, I buy similar spare parts. Technical inspection is 15% cheaper and does not affect the quality and performance of the machine.

Source

How a successful successor to the “ten” was created

Lada Priora, or VAZ 2170, was born in the throes of design for quite a long time. The “birth” began when the first 2110 just rolled off the assembly line. Manufacturers already understood then that the “ten” would soon be restyled, and far from cosmetic. Almost everything had to be changed - interior, exterior, power units, chassis.

Finally, by 2001, the “face” of the new car was finally formed. By 2003, a prototype was created. Serial production began at the end of 2006, and sales began only in the spring of 2007. From the very beginning, a sedan was produced (VAZ 2170), a little later - a station wagon, as well as a hatchback (2171 and 2172). Coupes were produced in limited numbers (21,728).

The model was successfully produced and sold for almost 10 years, until in mid-2022 AvtoVAZ managers announced that production would be discontinued. During this time, more modern car models appeared - Grant, Kalina-2 and Vesta. Be that as it may, 2170 turned out to be a successful model and still pleases its owners.

Life hack: Priora oil filter

The oil filter of a Priora car is responsible for cleaning the oil from impurities and metal particles. There are many filter manufacturers on Priora: Mann, Livny, Big, Salute and others. The price of an oil filter starts from 200 rubles - read the article to the end: you will find out popular filters, which one is better and the article numbers (original number) for them. All the oil in the engine flows through the oil filter. Therefore, it is the most important element of the filtration system. It is located in the lower engine compartment. The degree of oil purification affects the operation of the engine compartment. The cleaning system element does not depend on the engine type (16 or 8 valves); the standard configuration may have several variations.

Fuel filter

For LADA (SHIGULI) 2170 (Priora) 1.6, MANN recommends the following filters: C 22 117, W 914/2, WK 512. Detailed characteristics of these filters can be found in our catalog.

Replacement intervals

On LADA (SHIGULI) 2170 (Priora) 1.6 it is recommended to change the fuel filter every 100 thousand km.

If you are wondering which fuel filter to install on the LADA (SHIGULI) 2170 (Priora) 1.6, then MANN has taken care of you and has created a selection of filters from its catalogs specifically for your fuel system. Below is a list of fuel filters that you can install on LADA (SHIGULI) 2170 (Priora) 1.6. The fuel filter is one of the most important filters; it has a high degree of purification and prevents small and large particles from getting into the engine along with gasoline or diesel.

Source

Dimensions of the original Priora oil filter - article number

Regardless of the type and characteristics of the engine, the factory version of the Lada Priora is equipped with one of two filter options.

Oil filter salute

Manufactures. The company has been producing filter system elements for VAZ cars since 1998. Among the advantages of the part is a bypass valve device. Thanks to this system, the part allows the oil substance to pass through it, even if it is completely clogged. Among the disadvantages is the low quality of filter paper. It often breaks.

The article number for the oil cleaning element is 2108/1012005/010. The price of the part is from 150 rubles.

Oil cleaner Lada

Releases. Car enthusiasts note the low quality of the part. Disadvantages - poor quality paper, oil leakage around the perimeter of the folding.

Part number – 2108/1012005/08. Price – from 150 rubles.

To replace a part, you need to know its dimensions in order to select an analogue.

How to change the engine oil filter

Replacing an old filter device with a new one in relation to a Priora car is carried out simultaneously with changing the oil fluid in the engine. AvtoVAZ recommends changing synthetic lubricant every 15 thousand kilometers. If the car is operated in difficult urban conditions, this procedure should be carried out more often - every 10 thousand km. In order to carry out this work, you must first prepare:

• synthetic motor oil with a volume of at least 3.5 liters;
• a new oil filter from those listed above;
• a container for draining spent fluid with a capacity of at least 4 liters;
• wrench 17, filter removal device;
• rags and wire brush.

Before replacing, warm up the engine well to operating temperature. It is advisable to fill in the same lubricant as was used before. If you want to fill in a different brand of lubricant from a different manufacturer, after draining the used one, you need to rinse the motor with a special flushing oil. In this case, it is advisable to change the filtration device 2 times - before washing and before adding fresh oil.

1. Lada Priora is placed above the inspection hole or drives onto an overpass.
2. The hood opens, the neck is unscrewed, through which lubricant is poured.
3. The engine splash guard is removed, cleaned with a brush and a rag, and then the drain plug is loosened.
4. An empty container is placed under the cork, and the cork is carefully unscrewed.
5. The spent fluid is drained from the engine. You should wait until the leak stops.
6. The plug is screwed into place.
7. The container is installed under the filter to prevent lubricant from spilling from it. It is unscrewed with a special device.
8. Fresh oil is poured into the new filter device to 2/3 of its volume.
9. The O-ring is also lubricated with clean oil.
10. The new filtration device is screwed in by hand. As soon as the seal touches the motor housing, you should tighten the filter by hand 3/4 of a turn.
11. Fresh lubricant is poured through the neck under the hood. Its level is checked with a dipstick. It should be around the max.
12. Start the engine, check the lubricant pressure level using the emergency indicator - it should go out 2-3 seconds after the start.
13. After the engine has been running for several minutes, the lubricant level is measured again. The norm is in the middle between the min and max marks. If below, oil should be added.

It is necessary to check for any grease leaks in the area of ​​the filter and drain hole. If there is, you need to tighten these elements. This completes the work.

List of oil purifier analogues for Lada Priora

Since the hole for the filter in many machines is the same diameter, many manufacturers produce these consumables under their own brand.

Manufacturer: Big filter company. The price is approximately 130 rubles. Users note the quality. Among the shortcomings is a weak seal. Article – gb 102 m.

The model is considered a foreign analogue of good quality. Those who used the analogue and installed the part found no shortcomings. The price of the mann cleaner is from 180 rubles. Article - w914-2.

Product code – ph 5822. Price – around 160 rubles. Among the reviews there are both positive and negative. The disadvantages are that the filter component is of insufficient size and density.

Article - 0451 103126. The filter will fit the characteristics of the Priora. It is distinguished by its quality and significant filtering area.

Lubrication system

The image below shows the oil system of Lada Priora engines - VAZ 21116 and 21126. The lubrication system option is combined. For example, engine oil is supplied to the crankshaft bearings (main and connecting rod) under pressure, and is sprayed onto the surfaces of the cylinders by nozzles. The oil filter is a full-flow type. It is a disposable, non-removable device that must be replaced simultaneously with the lubricant.

The main task of the lubrication system is to provide oil access to all engine parts, ensuring their lubrication and removing excess heat. A gear-type oil pump is responsible for the pressure inside the system channels, ensuring continuous circulation of engine lubrication. The pressure sensor allows the driver to control the process. If the pressure drops below normal, the warning indicator on the dashboard lights up.

Instructions for dismantling and replacing parts

To replace it, it is not necessary to contact a car service specialist. You can do the work yourself if you acquire the necessary tools and follow the sequence of activities.

What is required for dismantling and replacement

• wrench or socket size 17;
• workwear;
• container for draining used oil;
• new spare part;
• screwdriver;
• rags;
• hammer;
• lubricant;
• oil.