The domestic car Lada Vesta has many good reviews. The car has good ground clearance, which is important for our roads. It has excellent sound insulation and maneuverability. But in a barrel of honey, as they say, there is a fly in the ointment. Over time, extraneous noise arises: a knocking sound in the rear of the suspension system.
Plant specialists admit this fact and say that the reason is the shock absorbers on Vesta. The solution to the problem is simple: you need to choose the right washers of the right size for the front strut supports. Or rebuild the suspension and replace parts. During the replacement process, you can install original kits or related products.
It is the issue regarding the replacement and installation of analogues that will be discussed in this article. We will touch upon the issue of stands for shock-absorbing elements and announce the timing of replacement of shock absorbers.
Features of Vesta car shock absorbers
The front shock absorbers have the appearance of classic MacPherson struts and have the following characteristics:
Catalog number | 8450006745 (left) 8450006744 (right) |
Shock absorber type | Gas |
Bottom mount | Eyelet + rubber-metal joint |
Top mount | Stock |
Rod diameter | 20 mm |
Case diameter | 48.5 mm |
A special feature of the rear shock absorbers is their separate location from the springs. These are double-sided gas shock absorbers, which differ from other VAZ models in their size.
Catalog number | 2180-2915402 |
Shock absorber type | Gas |
Axle (installation side) | Rear, right, left |
Bottom mount | Eyelet + rubber-metal hinge |
Top mount | Stock |
Rod thread parameters | M10x1.25 |
Connection length 2 | 602±3 mm |
Connection length 1 | 375±3 mm |
Rod diameter | 12.5 mm |
Casing diameter | 47 mm |
Rod stroke | 237 mm |
Installation of stabilizer struts
Installation of the new kit is carried out in the reverse order.
When tightening, you do not need to exert high physical effort. 44 Nm is enough. If you are installing the original, you need to know the product catalog number: 8450006748.
Sometimes you can only get by by replacing the stabilizer bushings. Stub bushings are suitable in dimensions d/h/w: 40/45/38 mm. hole diameter 22 mm.
Of particular interest are products made from polyurethane in the following dimensions: L/W/H: 39/42/43.5 mm. similar dimensions to Chevrolet Niva.
Also suitable are consumables, which according to the catalog go under No. 2123-2906046. If we talk about KIA, this is the catalog number KSBSJULF-21.5 mm (54813-2K 100). This option uses brackets 54814-G000.
For complete clarity, we present the average prices of assembly bushings:
- The stub will cost 450-700 rubles.
- Niva costs from 150 to 300 rubles per pair.
- KIA option 150-600 rubles per unit (piece).
In addition, the fastening nuts are disposable. When assembling a new kit, you need to use new fasteners.
How do you know if a shock absorber has failed?
The first sign of a damaged rack will be discomfort when hitting an obstacle.
The lack of proper shock absorption is very noticeable in the cabin. The following signs will help you suspect a malfunction:
- Unusual sounds from the suspension. They may be constant or occur only during off-road driving;
- The car's controllability has decreased, the car skids and sways from side to side.
- The ground clearance has decreased (the car has sank).
- If the shock absorbers are oil or gas oil, they may leak. The appearance of drips on the racks indicates that they need to be replaced. The leakage of gas struts can be determined by the characteristic hissing sound made by the gas escaping from them.
Related link:
Test drive - Lada Vesta
If you have such problems, you need to contact a service station, where they will carry out diagnostics and find out the causes of the problem. If you have a suitable location and the necessary equipment, you can inspect and identify the problem yourself.
Practical tips for choosing racks
After making sure that the shock absorbers are faulty, the driver needs to select a worthy replacement for the worn-out parts.
Some tips for choosing spare parts:
- Pay attention to original products, or choose analogues from well-known and well-established manufacturers;
- Buy parts from large retail outlets that have quality certificates for their products and guarantee their originality. Do not buy spare parts on the market or secondhand.
- The cost of the shock absorber should not be too low. If the price differs significantly from other offers, most likely you are being offered a low-quality product.
- The shock absorber must be packaged in a separate box with the article number, catalog number and manufacturer's logo on it. Factory catalog number of rear shock absorbers 2180-2915004-12, front 8450006745 (left), 8450006744 (right).
Cost of shock absorbers for Lada Vesta
Many drivers are interested in the question, what shock absorbers are installed on Vesta from the factory? According to information from official sources, Lada Vesta cars of all modifications are equipped with Russian-made parts. They are manufactured by the Russian company SAAZ (Skopinsky Automotive Aggregate Plant), specially commissioned by AvtoVAZ. These racks are adapted for difficult road conditions and have proven themselves in practice.
If replacement is necessary, the driver can purchase original spare parts that are commercially available. You can also use analogues, which are also widely available on the shelves of auto stores. The cost of shock absorbers from different manufacturers is presented in the following table:
Manufacturer | vendor code | Cost (front/rear) | |
Front | Rear | ||
ASOMI (Russia, Tolyatti) | А180.2905.002 А180.2905.003 | A180.2905.004-30 | 5980 RUR/2 pcs. RUR 3,980/2 pcs. |
Demfi (Russia, Skopino) | SFC8012 | SRC8012 | 6400 RUR/2 pcs. 5200 RUR/2 pcs. |
SS20 (Russia) | OEM 8450006744 and 8450006745 | OEM 8450006786 | 6490 RUR/2 pcs. 4160 RUR/2 pcs. |
Finwhale (Germany) | 13081GR 13082GL | 25057 GU | 2000 rub/piece 1100 rub/piece |
Trialli (Russia, Türkiye) | AG1365 AG01164 | AG 01515 | 2800 rub/piece 1500 rub/piece |
Pilenga (Italy) | SH-P2712G | 2300 rub/piece 1900 rub/piece | |
Stellox Germany (produced in Macedonia, Turkey, Poland) | 4214-0108-SX 4214-0107-SX | 42140106SX | 2300 rub/piece 1800 rub/piece |
Related link:
Vesta SW – is it worth paying extra for the Cross console?
*Prices are valid as of August 2022
Reviews and recommendations from Lada Vesta owners
Positive | Negative |
With a mileage of 38 thousand, strange sounds began to arise from the front suspension. It turned out that the racks were rattling and had already exhausted their service life. I decided to replace the original shock absorbers with the manufacturer Acomi. After I ordered on the official website, the manager immediately called back and clarified the details. The parcel arrived in Tula in 4 days, the details are as in the picture, packed in boxes. I’ve been riding the new shock absorbers for a month now, and so far I can’t say anything bad – they cope with unevenness and obstacles perfectly. | After replacing the original front struts with Acomi, the car began to handle worse. With the Saazov struts, it seemed to be more confused; I always knew how the car would behave in a given situation. Now, when cornering, the car sways a little and in a strong crosswind, strange vibrations are felt. The original shock absorbers were still better. On the plus side, I note that the new struts are a little quieter and give a smoother ride. |
Three months ago I installed SS20 struts on my Vesta. They are much quieter and softer than their relatives, and they are a pleasure to drive. I go over potholes smoothly, even speed bumps are not a problem. Great product! I recommend! | Don't buy Finwhale! This is not Germany, as it says on the box, but the real China. I didn’t even drive 15 thousand on them - they rattled like mad! |
In my opinion, the best shock absorbers for the Lada Vesta are Demfi. They are inexpensive, reliable and high quality, although a little harsh. I’ve been driving them off-road and in potholes for the second year now, no problems and the price is very reasonable. | For me, not only the service life of the struts is important, but also the comfort of control and in the cabin. The Russian SS20s are very disappointing in this regard, as they are even more rigid than the original ones. Every bump in the road is clearly felt in the cabin. This is despite the fact that I did not choose the sports version, but the softer one. I can imagine how it feels to drive sports models! |
I work in delivery, so the factory suspension did not last long. When it came time to change the struts, the guys from the service station advised Demfi. Russian manufacturer, quite reliable and inexpensive. | I wanted to buy good racks for a Lada Vesta car. The Kayaba manufacturer was not available; they probably don’t produce shock absorbers for this car yet. The sellers persuaded us to use Trialli. To be honest, they didn't impress me. The car looks like jelly on them, it doesn’t listen well to the steering wheel and it even seems to me that the seating position has become lower. The factory racks were even better. |
Related link:
Review of the Lada Vesta model range
Top 2. LEMFORDER 3536401
Rating (2021): 4.69
The most reliable stabilizer struts. A powerful strut designed for the highest loads. The best option in terms of reliability and durability.
- Characteristics
Average price: 1,900 rub.
- Country: Germany
- Stand length (mm): 295
- OE code: BMW 31 35 6 765 933
This is not the most popular product, as its price may shock many. In fact, there is nothing strange about this. The company is German and produces racks at its own factory, which is why we see such a price. The company's products are installed on BMW cars, and this already says a lot. But nothing prevents you from installing them on a Lada Vesta car: 295 millimeters in length are ideal for the design of the car. The resource here is very high, about 85 thousand km. Moreover, this is not driving on flat roads, but a maximum load. Of course, the price is very high, but replacement is required extremely rarely, which partially offsets it.
Advantages and disadvantages
- High reliability
- Long service life for any driving style
- Real German quality
- High price
- Maximum stand length for Vesta
See also:
- 5 best brake pads for Lada Vesta
conclusions
- The shock absorbers on the Lada Vesta have an original design and are not used on other VAZ car models;
- Factory-installed shock absorbers from the Russian manufacturer SAAZ are of good quality and have a long service life;
- If replacement is necessary, the buyer can purchase original spare parts or replace them with high-quality analogues;
- Among all the models on the market, the most popular manufacturers are: SAAZ, SS20, Demfi and Acomi. They offer good quality at an affordable price, as well as a large selection of models with different functional features.
Analogs of front shock absorber struts for Lada Vesta
Before considering the possibility of installing products from related companies, it is necessary to understand the part numbers and dimensions of the front pillars. After all, the right and left elements have different article numbers: left 8450006745 ; right 8450006744.
Returning to the issue of quality, we can state that original designs, with proper care and a calm driving style, last a long time, especially on our broken roads. Drivers are not bothered by knocking and noise.
Some of them do not agree with this: they modernize the factory struts and change the original valves. Today you can choose shock absorbers from allied companies, as they say, according to yourself:
- Strengthened version.
- Less noisy analog components.
There are a lot of options on sale to suit every taste and budget. We will consider only those analogues that have officially entered our market and are popular among Lada Vesta owners.