The VAZ 2110 gearbox has one “disease” - a deteriorating oil seal. Either the left or the right side suffers. Fortunately, replacing the oil seal is a completely do-it-yourself procedure. And our article will tell you how to replace the gear selector rod seal of a VAZ 2110 without removing the gearbox.
Removing the VAZ 2110 gearbox takes a lot of time and effort. In addition, such a procedure is generally not recommended to be done without the necessary knowledge. Still, tasks of this level of complexity are best left to the service center specialists. But if you are in no hurry to take your car to a service station and want to replace the oil seal yourself, then our detailed repair instructions will be of great help to you.
How often do they need to be replaced and why do they break? This element is a very important part of the car. It needs to be changed every three years, because even the slightest displacement will cause an oil leak. Replacement should be carried out only when the signs are clearly expressed, in our case it is oil leakage. This procedure and its consequences must be treated carefully, and not negligently. The sooner you notice a breakdown, the less damage will be caused, and the less costly this situation will be for you. So always monitor the condition of this element, as they say, listen and take a closer look.
Tools
- Hammer;
- Screw;
- New part;
- Lubrication.
In order to replace the oil seal in a VAZ 2110 gearbox, you need to purchase the correct part. Before purchasing, pay attention to the broken part, where it was located on the left or right. This is the part you need to purchase. The left and right ones differ in the arrow indicators on the inside, the color and different numbers on the ends. You can purchase them at any car market or specialty store.
When and how to replace the oil seal on a VAZ 2110 gearbox?
The VAZ 2110 gearbox is manual. To extend its service life, it is advisable to use original transmission oils. It should be noted that the VAZ 2110 is equipped with injection engines.
When does it become necessary to replace the VAZ 2110 gearbox oil seal?
The VAZ 2110 transmission system includes reliable components that, when interacting, ensure smooth running and decent power performance of the vehicle. Among the consumables that periodically have to be changed on a car are oil seals. These components are located on the front wheel drives and the gearbox input shaft. Among the reasons for their deformation are:
- natural wear and tear;
- factory defect of the product;
- mechanical damage as a result of external influence.
The result of this is an oil leak from the gearbox. The failure of a spare part can be indicated by the presence of an oil slick under the car or the appearance of a characteristic crunch when changing gears. An independent inspection often reveals fuel leaks at the junction of the gearbox and the power unit. In case of these manifestations, vehicles must be sent for diagnostics.
What tools are needed to replace consumables? To carry out this procedure, you need a set of keys and heads, a chisel (punch punch), and a hammer. The sooner a breakdown is detected, the less damage will be caused to the automotive system.
How to replace the gearbox drive oil seal, the input shaft of the VAZ 2110 gearbox?
When servicing a car's gearbox, the driver often needs to change the rod seals along with the seals on the manual transmission. If these elements have lost their physical properties, then the owner of the VAZ 2110 will face a problem such as oil leakage in the gearbox. To fix the problem, you need to replace the seals, seals and sealants.
The drive seal (left or right) is changed as follows:
- The driver must provide access to the checkpoint.
- It is necessary to drain the transmission oil from the car into a previously prepared container.
- The drive is removed.
- The old oil seal is removed and a new one is installed.
In this case, there is no need to disassemble or remove the gearbox from its original location.
Important! When installing a new oil seal, it is necessary to lubricate it and use a special seal.
Removal of the gearbox is required if the input shaft oil seal is worn out. This accessory part changes as follows:
- Removing clutch parts from the housing.
- Using a special tool, you must carefully pierce the oil seal.
- To remove the oil seal, use pliers.
- A new part is being installed.
How often do you have to replace? This indicator is influenced by driving style. On average, a spare part is replaced every three years. As a rule, after replacing this component, the car restores its driving properties.
Thus, it is possible to replace the oil seal on a VAZ 2110 gearbox yourself using special tools. This transmission consumable cannot be restored. Its price remains affordable. To keep vehicles in working condition, it is worth undergoing maintenance every 15,000 km.
Instructions
- Place the car on a lift.
- Disconnect the wire from the terminal.
- Remove the flywheel.
- Remove the rear shield of the clutch housing, which is directed towards the bushings.
- Unscrew the bolts (8 pieces).
- Remove the holder from the part.
- Now you need to knock it out of the gearbox; to do this, use a screw and a hammer.
- Now we take the new element and press it into the holder. Outer diameter - (99±0.5) mm.
- The working edge should be on the inside, if anything, turn it over.
- A gasket that is torn must be removed. It will stay in place thanks to the lubricant on the holder.
- Lubricate the edge with engine oil.
- Also lubricate the crankshaft flange with engine oil.
- Place the working edge onto the flange.
- Tighten the bolts.
- Reinsert the crankcase and bushings.
- Replace the flywheel and clutch.
How to replace the gearbox drive seal on a VAZ 2110
Replacing the front-wheel drive oil seal on VAZ-2108, VAZ-2109, VAZ-2110, VAZ-2115 cars
Is the front wheel drive seal leaking? Thoughts like: How expensive is it to replace an oil seal? Is it possible to replace the oil seal with your own hands? And how difficult is it to replace it? Yes!? Then you have come to the right place... I can say for sure that it is not difficult, and you can easily carry out the work yourself. Of course, only if you have the desire, the necessary tools and precise instructions for correctly replacing the front wheel drive oil seal on VAZ-2108, VAZ-2109, VAZ-2110, VAZ-2115 from the Auto Repair School website! ))) Well, as they say, from words to deeds! Let's move on to the description of the main thing - a list of tools, purchasing spare parts and the process of replacing the drive seal with photographs
