Where is the relay for switching on the Kalina 8 valve fan?

Kalina » Maintenance and repair
A possible reason for your power windows, cigarette lighter, or other electrical device not working may be a blown fuse or broken relay.

Below - about fuses and relays on the LADA Kalina (station wagon, hatchback) of the 2nd generation: where they are, how the circuits are deciphered and how to replace them yourself.

Where are the fuses on Kalina and why are they needed?

Every vehicle is equipped with a fuse box. The first generation “Kalina” is equipped with 3 such devices: installation, control and additional. The second generation model, or as it is also called “Kalina 2”, is equipped with 2 blocks.

These elements are necessary not only to protect all vehicle electronics from combustion, but also prevent the occurrence of fire, because In the event of a short circuit, they take on the entire load. In this case, the fuse itself fails, thereby stopping the flow of current to the electrical appliance.

Or maybe it's not the fan relay?

In order to accurately determine the cause of such a malfunction, it is necessary first of all to check all fan contacts for the presence of oxides and traces of rust, as well as the wiring for breaks and abrasions.

Fan relay and fuse, where are they?

The additional fuse box is marked with an arrow in the photo.

If these manipulations did not bring any success, then it is necessary to look at the fuse and relay responsible for the operation of the cooling fan.

  1. Finding them is not difficult; you just need to unscrew one bolt located on the side of the center console near the left foot of the front passenger.
  2. When the decorative trim is dismantled, we will need a “10” key to remove the fuse box from its place of fixation and bring it out.
  3. This work may cause some inconvenience, because thick wire harnesses are connected to the relay block.
  4. This is how it looks after removal, now all that remains is to check their functionality and put everything back in the reverse order.

When they are dismantled from their place, you can easily carry out work on them.

  1. Low speed cooling fan relay.
  2. Main relay.
  3. High speed cooling fan relay.
  4. 50 Amp fuse.
  5. Relay for turning on the pump (fuel).

Source

Fuse types

Fuses are classified into cylindrical and blade. The first ones were used in the operation of old-style Russian cars. Knife-type elements are considered safer, more convenient and are used in all Lada Kalina cars.

Fuses also differ in the rated current indicated on the housing and in size. In addition, each value of the maximum permissible current has its own color, which also makes it possible to distinguish fuses without much difficulty.

Problems when paying with bank cards

Sometimes difficulties may arise when paying with Visa/MasterCard bank cards. The most common of them:

  1. There is a restriction on the card for paying for online purchases
  2. A plastic card is not intended for making payments online.
  3. The plastic card is not activated for making payments online.
  4. There are not enough funds on the plastic card.

In order to solve these problems, you need to call or write to the technical support of the bank where you are served. Bank specialists will help you resolve them and make payments.

That's basically it. The entire process of paying for a book in PDF format on car repair on our website takes 1-2 minutes.

Mounting block

Located under the instrument panel for controlling dimensions and headlights, on the driver's side to the left of the steering wheel. In this block, Kalina fuses are responsible for the safety of almost all installed electrical appliances. The location of the mounting block for car fuses of generations 1 and 2 is the same, but its diagram is different.

A breakdown of the Kalina fuses of the 1st and 2nd generations is presented below.

Control block

On the 1st generation Kalina it is installed under a cover in the center console. The fuses in this unit protect the most basic electronics. There is also a connector for injector diagnostics. On a 2nd generation car the unit is located under the hood, in the engine compartment.

Removal and replacement process

To replace blown fuses and broken relays, you will need plastic tweezers or needle-nose pliers/long-nose pliers.

Under the hood

The procedure is as follows:

  1. Turn off the ignition and open the hood.
  2. Remove the cover from the unit by pulling it up.
  3. Pull out the required fuse and insert a new one.
  4. Check the operation of the protected device. If the fuse link immediately burns out, you need to find and eliminate the cause of the short circuit.
  5. Close the block with a lid.

Decoding the fuses on Kalina 1

Mounting block fuses

Marking on the diagramCurrent strength, AProtected elements of the electrical network
F-110Turn signals, reverse signal, immobilizer, instrument panel
F-230Electric door windows
F-310Emergency Signal
F-420Windshield wipers and washer, turning off heated rear view glass
F-525Interior heater engine (heater)
F-620Sound signal (beep)
F-710Car interior lights, brake lights
F-820Heated rear view glass
F-95Right dimensions, glove compartment lamp
F-105Left dimensions, external rear license plate illumination
F-117,5Rear fog lights
F-127,5Right low beam, low beam position control for right headlight
F-137,5Left low beam, low beam lamp position corrector for left headlight
F-1410Right high beam
F-1510Left high beam
F-1610Right front fog lights
F-1710Left front fog lights
F-1815Seat heating
F-1910ABS brake system
F-2015Cigarette lighter
F-2110Reverse fuse "Kalina" (limiter on the gearbox)
F-2215Security alarm
F-23, F-24, F-25Stock
F-2625ABS
F-2750Electric power steering
F-2850ABS

Vehicle maintenance

A catalog of consumable spare parts required for maintenance is given in Chapter 3b of this manual.

Periodic Maintenance

Timely and regular maintenance of the car in accordance with the technological map (see the service book attached to the car upon sale) can significantly extend the life of the car.

A message appears in the notification center indicating the mileage remaining until the next service. This message appears and remains for 4 seconds each time the ignition switch is turned to position 2.

The display begins to show mileage - 10,000 km. This distance gradually decreases (every 50 km) until zero remains (in this case, service must be performed). After each service the display is reset again to 10,000 km.

Note

Service intervals are based on 50 km intervals, so short journeys may not be shown on the display.

The vehicle must be serviced every 10,000 km or every 6 months (whichever comes first).

Note

If service has not been performed (or the display has not been reset), the distance indicator will remain at that value after reaching zero until reset.

The service center employee must make the appropriate notes, stamp and sign the vehicle’s service book for each maintenance service.

Replacing brake fluid

Brake fluid requires replacement every two years, regardless of the vehicle's mileage.

Note

Replacing brake fluid is included in scheduled maintenance and is paid for.

Coolant replacement

Engine coolant must be replaced every three years, regardless of the vehicle's mileage.

Note

Coolant replacement is included in scheduled maintenance and is paid for.

Monitoring the content of harmful emissions in exhaust gases

This vehicle is equipped with a system to control harmful emissions and fuel vapors. Incorrect engine settings can affect exhaust emissions, engine performance and fuel consumption, and can cause elevated temperatures that damage the catalytic converters and engine.

Attention Please be aware that replacement, modification or counterfeiting of these devices is punishable by law. In addition, outside interference in engine settings is strictly PROHIBITED!

"Kalina 2" - decoding the purpose of the fuses

Mounting block fuses on Kalina 2

Designation on the diagramCurrent strength, AProtected elements of the electrical network
F-115Ignition coil, injectors, engine control unit (ECU, “brains”), engine cooling fan
F-225Body electrical equipment, power windows, exterior mirrors
F-315Automatic transmission
F-415Airbags
F-57,5Instrument panel, electric power steering, speed sensor, brake light, windshield wipers, heated rear and windshield, heated seats
F-67,5Reversing warning light
F-77,5Canister purge valve, mass air flow sensor (MAF), oxygen concentration sensor, phase sensor
F-825Heated rear window and exterior mirrors
F-95Right dimensions
F-105Left dimensions, rear license plate illumination
F-115Rear fog lights
F-1210Right low beam
F-1310Left low beam
F-1410Right high beam
F-1510Left high beam
F-1610Front fog lamp right
F-1710Front fog lamp left
F-1820Cigarette lighter, heated seats
F-197,5ABS system
F-2015Sound signal (beep)
F-2110Fuel pump
F-2215Wipers and washer for rear and windshields
F-235Diagnostic connector
F-247,5Air conditioning, climate control
F-257,5Brake lights
F-2625ABS
F-27, F-28, F-29, F-30Reserve
F-3130Body electrical equipment, windshield wiper motor
F-3230Interior heater (stove), climate control
Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]