About wheel bolt patterns on Chevrolet cars

Successful selection of wheels for Chevrolet, which will not lose their original properties for a long time, must begin with the correct determination of the model modification, engine size and year when it was released. If there is a need to replace car wheels, then it is important to take into account such a parameter as the wheel bolt pattern on a Chevrolet.

Chevrolet Cruze

Models of different generations used different wheels. As a rule, this information is indicated in the technical documentation for the vehicle. In addition, each car has a sign indicating which tires and wheels are suitable.

To secure the Chevrolet wheel, there are five bolts tightened with a torque of 140 Nm. The hub hole is 56.5 millimeters, and the bolt pattern of the Chevrolet Cruze wheels is 5x105.

The preferred wheel size is from 16 to 18, with a offset of 34-42 millimeters. On standard Chevrolet Cruze R16 wheels, the bolt pattern is no different.

Characteristics

Let's look at the wheel bolt pattern for the Chevrolet Cruze according to the manufacturer's data by year of manufacture and generation:

Alloy wheels.

Tuning version

For a sporty driving style, wide wheels with wide tires are more suitable. They improve road stability and braking. As a result, the driver feels more confident and can accelerate at high speeds.

In addition to bolt patterns, tire pressure can also affect your driving experience on your 2013 Chevrolet Cruze. It is best to check it after a trip, when the car has cooled down, after about 2 hours. The optimal value is 220/2, 2/32.

2011 Chevrolet Cruze bolt pattern - 5x105. This model does not have bolts that change depending on the year of manufacture. Therefore, tires are interchangeable. From the factory, the car was equipped with 16 or 17 wheels. A radius of 18 is already considered tuning and significantly affects the style of the car.

Technical parameters of the disk.

The 2012 Chevrolet Cruze bolt pattern will not differ from the standard one. To tune this model, you can set the offset to 40 mm, put on wheels with a diameter of 18 and a width of 7.0-7.5. The appearance of the car has already changed significantly.

The 2013 Chevrolet Cruze bolt pattern has the same parameters as previous models. The optimal values ​​for tuning are 18 diameter, 40 mm offset and rim width 7.5.

Chevrolet Lacetti

Each vehicle is designed for a specific drill and tire size. The manufacturer prescribes all the technical characteristics of the vehicle, which can be studied in the service book or on the body pillar on the right side.

Characteristics provided by the manufacturer for Lacetti:

• 14 / 5.5J PCD 4×114.3 ET 44 CO 56.5;
• 15 / 6.0J - all other values ​​are repeated

The numbers 14 and 15 indicate the diameter of the disk, which is set at the time of assembly, the next indicator, that is, 4x114.3, is the bolt pattern.

The central hole is 56.5 millimeters, the normal wheel offset is 35-44. The permissible width of the disks is 5.5 - 6.0.

What is the difference between original wheels and replicas?

To avoid accidentally purchasing a replica, you must first carefully inspect the wheels from the inside. Their markings should be indicated there. Its absence or unclear, uneven application is the first signal that the wheel is a replica.

However, many manufacturers are able to accurately fake even the markings. Then it is important to pay attention to the quality of execution of the innermost part. If there are small irregularities, chips or defects, it is recommended not to purchase such wheels.

The greatest possible protection against counterfeiting or replicas can be made by purchasing from an official store, where all the certificates and necessary documents are present. Due to the prevalence and standard sizes of wheels and tires on the Chevrolet Cruze, choosing high-quality products is not difficult. The main thing is to buy kits from trusted, reliable sellers and avoid used options.

The Chevrolet Cruze bolt pattern is an important parameter that the owner of this car needs to know when replacing wheel rims. In some sources there is a second name for the parameter - drilling. You need to know it, as it indicates how the wheel is attached to the chassis.

This budget sedan is produced and sold all over the world. It has become quite widespread in Russia.

Differences between hatchback and sedan

The popular Chevrolet Lacetti model is available in three body styles: sedan, hatchback and station wagon. They have no difference in drilling parameters. An absolutely identical indicator of 4 × 114.3 is used. This is done for unification, since the same wheels are installed on these cars. This reduces the cost of the production process as there is no need to drill different holes for a specific vehicle. This is also done for the convenience of car owners so that there is no unnecessary confusion.

These modifications differ only in the size and design of the disks themselves, which depend on the configuration chosen at the dealer. Stamped steel products are installed in the base and cast ones in more expensive modifications.

Knowing the drilling parameters for the Chevrolet model range, you can easily select any wheel rims. Maintaining the correct details ensures that the products will fit and conform to factory settings.

Tire markings

The wheel bolt pattern on a Chevrolet Cruze has the following abbreviations:

• ET – disc offset;
• LZ – number of holes;
• DIA – hole diameter;
• PCD – hole center diameter.

The wheel bolt pattern on a Chevrolet Cruze is not all that a car enthusiast needs to know to select tires for his car. Important parameters are the markings on the tires:

• Treadwear 300 – a value characterizing wear resistance;
• Traction A - skid-resistant tires, the letter C means compliance with the minimum requirements;
• Temperature – heat removal at high speeds, A – heat removal at speeds above 180 km/h, B – at speeds 160-180 km/h, C – at speeds below 160 km/h;
• TWI – tire wear mark;
• M+S - an indication of the large distance between the tread lugs, which increases stability in snow and mud.

Bottom line

The best option would be to purchase original components, which will prevent the possibility of incompatibility of the product with the vehicle, however, in the case of installing non-standard options, it is necessary to pay attention to the bolt pattern and offset of the disk, as well as the diameter and quality of the mounting holes.

The design architecture of the Chevrolet Cruze provides for the installation of wheels of unofficial standard sizes, which allows you to completely customize the car to the individual preferences of the owner - you just need to select the right components.

Bolt pattern Chevrolet Cruze (J300) 2011 1.6 (124 hp, gasoline). Wheel bolt pattern on a Chevrolet Cruze

Wheel bolt pattern Chevrolet Cruze (J300) 2012 1.8 (141 hp, gasoline)

1. Razboltovka.ru
2. PCD
3. Chevrolet
4. Cruze (J300)
5. 1.8 (141 hp, gasoline)
6. 2012

Find the disk parameters of Chevrolet Cruze (J300) 2012, 1.8 (141 hp, gasoline).

Table of parameters and wheel bolt patterns for the Chevrolet Cruze (J300) 1.8 (141 hp, gasoline) model – 2012.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Save just in case so as not to lose!

razboltovka.ru

Chevrolet Cruze (J300) wheel bolt pattern

1. Razboltovka.ru
2. PCD
3. Chevrolet
4. Cruze (J300)

Select modification

Wheel bolt pattern table for Chevrolet Cruze (J300), wheels installed from the factory and matching the parameters.

• Cruze (J300) 1.4 (101 hp, petrol)
• Cruze (J300) 1.6 (109 hp, petrol)
• Cruze (J300) 1.6 (113 hp, petrol)
• Cruze (J300) 1.6 (124 hp, petrol)
• Cruze (J300) 1.7 D (131 hp, Diesel)
• Cruze (J300) 1.7 TD (110 hp, Diesel)
• Cruze (J300) 1.8 (141 hp, gasoline)
• Cruze (J300) 2.0 CDI (125 hp, Diesel)
• Cruze (J300) 2.0 CDI (150 hp, Diesel)
• Cruze (J300) 2.0 CDI (163 hp, Diesel)

Save just in case so as not to lose!

razboltovka.ru

Wheel bolt pattern Chevrolet Cruze (J300) 2011 1.6 (124 hp, gasoline)

1. Razboltovka.ru
2. PCD
3. Chevrolet
4. Cruze (J300)
5. 1.6 (124 hp, gasoline)
6. 2011

Find disk parameters for Chevrolet Cruze (J300) 2011, 1.6 (124 hp, gasoline).

Table of parameters and wheel bolt patterns for the Chevrolet Cruze (J300) 1.6 (124 hp, gasoline) model – 2011.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Save just in case so as not to lose!

razboltovka.ru

Wheel bolt pattern Chevrolet Cruze (J300) 2013 1.8 (141 hp, gasoline)

1. Razboltovka.ru
2. PCD
3. Chevrolet
4. Cruze (J300)
5. 1.8 (141 hp, gasoline)
6. 2013 onwards

Find the disk parameters of Chevrolet Cruze (J300) 2013, 1.8 (141 hp, gasoline).

Table of parameters and wheel bolt patterns for the Chevrolet Cruze (J300) 1.8 (141 hp, gasoline) model – 2013.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)

Save just in case so as not to lose!

razboltovka.ru

Wheel bolt pattern Chevrolet Cruze (J300) 2015 1.8 (141 hp, gasoline)

1. Razboltovka.ru
2. PCD
3. Chevrolet
4. Cruze (J300)
5. 1.8 (141 hp, gasoline)
6. 2015

Find the disk parameters of Chevrolet Cruze (J300) 2015, 1.8 (141 hp, gasoline).

Table of parameters and wheel bolt patterns for the Chevrolet Cruze (J300) 1.8 (141 hp, gasoline) model – 2015.

carwheelblog.ru

Parameters of trouser nuts - choose correctly

The issue of nuts becomes acute when switching to discs using a different manufacturing method: standard nuts from stampings may not be suitable for forging or casting. Wheel nuts differ only in design and height of the product - and if the height is insignificant, then the seat determines the compatibility of the fixing elements and the safe operation of the vehicle.

It is important to know! For the purpose of aesthetic comfort, it is recommended to choose nuts made of chromium, which are resistant to corrosion and oxidation processes. The steel mounting option will quickly fade, which will worsen the appearance of the disc.

Danger of incorrect bolt pattern

The definition of bolt pattern should not be neglected. It is this that, although indirectly, affects driving safety. If you install wheels without taking into account deviations in any direction, then it will be mounted with inaccuracy along the axis. This, in turn, will not allow you to achieve the desired tightening level.

It is almost impossible to determine whether the bolt pattern was made correctly “by eye”. The consequences of improper installation will be noticeable while driving by the following signs:

• increased wheel runout;
• damage to the steering mechanism, suspension;
• increasing the likelihood of the wheel coming loose.

As you can see, loose bolts have a serious impact on safety and can even lead to an accident.

You can often hear stories among motorists about adjusting the car's characteristics to new wheels whose PCD value is greater than the standard one (the one provided by the automaker). They often use disc centering rings during the installation process. It is worth mentioning the ambiguity of this method, however, many motorists see this as a way out when changing discs.

General background information

Possible value ranges for 2015 Chevrolet Cruze tires and wheels.
Tires

Wheel disks

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Chevrolet Cruze 2015?

3 types of rims:

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

• deterioration of management;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

• increased fuel consumption;
• rapid wear of the outer tread segments;
• the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

Generation 2 (not yet presented in Russia)

There have also been many changes in the interior, although the old architecture has been preserved.
A new instrument panel and steering wheel were installed in the cabin, and the center console and front panel were redesigned. The MyLink system with support for Apple CarPlay and Android Auto was already installed in the basic version. Due to the imposition of sanctions, deliveries of the second generation Chevrolet Cruze to Russia never began. On the global market, the model is available with the following power plant options:

1.8-liter engine (140 hp):

• 6.5J wheels on 16 ET39, tires – 215/60R16;
• 7J wheels on 17 ET40, tires – 225/50R17;
• 8.5J wheels on 18 ET40, tires – 225/45R18;
• wheels 9J on 19 ET40, tires – 235/40R19.

2-liter turbodiesel (153 hp):

• 7J wheels on 17 ET40, tires – 225/50R17;
• 7J wheels on 17 ET40, tires – 215/55R17.

The units are combined with a robotic gearbox or a 6-speed manual transmission.

Does the type of material matter or which discs are better?

Car rims also differ in type of manufacture - products are classified into:

Stamped wheels are a budget option, as they are produced by factory stamping with carbon steel separately from the rim and front part, followed by a welded connection.

After manufacturing, the discs are coated with powder enamel to increase resistance to metal corrosion. The main advantages of stampings are repairability and softness, thanks to which dents on the product can be straightened out yourself.

Cast metals are made by casting molten metal into a prepared die. Alloy wheels are made from light alloy materials: aluminum, titanium or magnesium. This method provides higher strength and corrosion resistance, but reduces the ductility of the product, which increases the fragility of the structure.

According to the law, repairs of cast light alloy products cannot be carried out by welding, and if cracks appear, the discs become unsuitable for use.

Forged - produced by volumetric stamping followed by assembly of a mixture of aluminum with magnesium and titanium. The stamped blank is processed on milling machines and hardened at high temperature. Forged wheels are characterized by high strength and durability, and due to the ductility of hardened metal, they are suitable for restoration.

Prefabricated discs are a rare type of disc, which is associated with the high cost of production. The products are made from versatile titanium alloy structural elements: a separate rim, front part, bolts. Features of the model are exclusivity and variability of appearance, which allows you to fully implement any design solution.