Life hack: side mirrors on Priora - removal and installation

Good visibility is important for safe driving. While driving, the driver always has to “keep his finger on the pulse” so as not to get into an unpleasant situation (accident). The side mirrors on the Priora are initially made quite well - the viewing angle is enough to sit still when reversing or changing lanes. This is not a joke, it’s really like a Kruzak review. After the Priorovskie cars I get into other cars and I miss my familiar overview. Mirrors on Priora come with turn signals (repeaters); this is the Special Edition version of Lada (luxury) Priora cars. The price of these is naturally more expensive, but not by much 900 rubles. They can be installed on a regular Priora. Turn signals in mirrors are a newfangled theme and they look beautiful and are also practical.

The side mirrors of the Priora 1 car have been improved along with the restyling of the car. In the SE luxury version, which is essentially the most expensive and complete package of the car, these devices have changed, the car has become even more convenient “for the driver”. Some people buy such SE mirrors on a Priora 2 and install them even if they originally bought a car with a more economical package.

All that remains is to properly disassemble the mirror and make friends with the wires. Indeed, to install the modernized version you will have to put a lot of effort into finding reasons. You can do simple tuning, if you want to change the appearance to a more curly one - just put covers on the mirrors. It seems like a small change, but the car looks more solid with them.

Who hasn’t felt the thrill of using a car after ten, or a classic, freezing the car in winter - heating seems to be a common thing, but this was not the case on the VAZ. The heated mirrors of the Priora car are implemented using spirals. Often turning on heating in wet weather, a mark forms on them. Despite this, after 6 years of use, they have not faded.

Standard side mirrors - article number and price

For the Lada Priora car, standard parts with electric drive have catalog number 2170-8201017. Price – about 3,100 rubles per set.

Compared to the SE version, they have one design disadvantage. The surface area does not completely cover the mirror, which can also be “usefully” occupied. This shortcoming was corrected with the SE, where the mirror elements were actually made larger.

Heated mirrors on the Priora received a larger mirror element. Thanks to this, the driver does not have to lower them when reversing – even this difficult-to-reach area is visible. For the SE version, repeaters were added to the mirrors. Priora with electric drive, repeater and heating (catalog number 2170-8201021, price - about 3,800 rubles per set) was much more expensive than conventional versions.

Please note that kits are often sold unpainted or painted to match the body color. If necessary, paint the body of the mirror device before installation. Painting it yourself will turn out much better. Some stores offer painting only the upper parts of the body, but you can choose any painting method yourself. Speaking about the rear-view mirror of a Priora car, you can notice that it is ordinary, as simple as two rubles, attached to a holder that is secured under the trim.

Reviews Running turn signal buy in Vologda

Runled turn signals are a revolutionary European tuning of premium quality that will help you stand out from the gray stream of boring cars. They can be installed in a few minutes and will delight the car owner for many years! Reviews Running turn signal buy in Vologda

I can speak positively about the RunLed running LED turn signal. This is a truly useful device for your car, which can be easily adapted to any domestic or foreign model. The installation of the equipment does not cause any complaints, and the utility and safety factor of the driver and his passengers increases significantly.

I will share my real review about the Running turn signal to buy in Vologda. If you are a true connoisseur of truly useful gadgets for the car, then you will undoubtedly like the next development, called the RunLed running LED turn signal. It must be said that thanks to this innovative invention you will become even more visible in the dark. Modern tuning has already become an adornment for thousands of cars in Europe, and is now available for installation in Russia. The simplest way to install the product, where even the most novice can cope with the task. Each original package contains high-quality 120 cm glue. The entire engineering structure is easily secured to the rear of the machine. All you have to do is correctly connect the contact wires to the electronics and enjoy the result achieved.

More links where you can learn about Running turn signal buy in Vologda: Running turn signal chevrolet cobalt

Running turn signal buy in Vologda

Running turn signal honda odyssey

, Running turn signal honda odyssey

Running turn signal buy in Vologda

,Rolling turn signal mitsubishi outlander xl, Running turn signal ssang yong musso How to install a running turn signal Running turn signal mercedes sl class.

Basic faults

Additions to the conventional mirror element make driving even more comfortable. Just in case, the repeater makes it clear to inattentive traffic participants where the driver is going to go. Heating will promptly evaporate moisture - raindrops, and will not leave stains that distort the image. The following malfunctions may occur during operation of the machine:

  • The fasteners have become loose. Each part is held in place by several fasteners at different points. They may become so loose that tightening them will be useless. Everything will depend on the severity of the damage. In some cases, replacing the fasteners will be sufficient.
  • The heating does not work. Check the connection of the wire blocks. Perhaps it is enough to strengthen the wire connections so that they no longer come loose.
  • The electric drive does not work. Adjusting the position of mirror devices while sitting in your seat is much more convenient than doing it manually. Check the wiring.
  • Turn signal repeater. If the repeater does not work, it means the signal is not reaching it. The problem, again, is the wiring.
  • Broken mirror element. It will be enough to replace it with a new part, but during the replacement you should be extremely careful. It is important to prevent splinters from getting under the cover.

Product categories

You can make purchases in our store without mandatory registration. But by registering, you will be able to do it faster and more conveniently, in addition, you will be able to monitor the fulfillment of orders and view the history of your orders. After registration, you will not have to enter your data each subsequent time for delivery of the purchased goods; it will be enough to simply log into the store using your personal data.

LLC "S-Auto" Dimitrovgrad, st. Pobeda, 9-47 TIN 7302036687 OGRN 1077302000929

Call us: 8-909-360-09-33 Mon-Sat 8:00-18:00 (Moscow time)

How to disassemble a mirror (left and right) on a Priora car - removal and installation

Replacing a device that is installed on a car of the “Norma” or “Standard” trim levels with the SE version becomes a good way of tuning. In order to disassemble these devices, you will have to disassemble the interior trim. Carry out the work as follows:

  1. Remove the screws that secure the A-pillar trim.
  2. Pull part of the trim towards you.
  3. The part is held in place by three bolts. First, lower the glass, then slowly unscrew the bolts, taking the reflective element with your other hand.
  4. Do not jerk the device. First, disconnect the wires - there should be two terminals going through them. The first is for heating, the second is for position adjustment.
  5. Place the new part in place of the old one and secure it with bolts.

Connecting the mirrors of a Priora car should be done according to the following diagram:

  1. the green wire goes to the black-green one;
  2. red wire - to blue-red;
  3. connect the blue wire to the black-blue one;
  4. brown wire - to red-blue (second block);
  5. black to black wire (second block; This is the “minus” for repeaters and heating).

If you change this part in winter, when the outside air temperature drops below zero, you will have to be more careful with the mirror element. Once you remove it, you should warm it up using a hair dryer or heat gun. The surface may become chipped or “burst,” so that it remains useless. You will have to prepare for the replacement in advance by obtaining the necessary tools.

Installation

Remove the standard side mirrors (pry off the mirror triangle with a screwdriver and remove the three mounting screws). Install the new mirror in the reverse order.

We stretch the turn signal wires to the mirrors:

  1. Remove the door trim.
  2. Remove the turn signal from the fender and disconnect the block. We install plugs instead.
  3. Pull the wires out of the fender and into the interior. To do this, unscrew the sill trims in the cabin, peel back the carpet and felt and pull the black wire in the engine panel. We determine which of the two +12 V wires using a multimeter or a test lamp. We insulate the second wire.
  4. Route the wire from the passenger compartment to the car door through the corrugation.

Connection

Old style mirrors (without direction indicators) have two connectors (3 and 2 wires):

The mirrors of the new SE model have 1 block of 6 wires:

We cut off the wires from the SE mirror block and solder it according to the diagram:

The process of installing and connecting mirrors of the new SE model is also shown in the video:

Found an error? Select it and press Ctrl+Enter..

Mirrors on the Priora SE and the old model, what is the difference?

1) The presence of turn signals on the mirrors. SE has them, old ones don't.

2) Visibility, it is greater on the SE mirrors.

3) Mirror mounting triangle. On the SE mirrors it fits better without any gaps.

4) Protection from rain. SE mirror housings provide less protection from rain and snow.

5) The external differences of the mirrors can be seen in the following photos:

At the moment, the price of SE mirrors on Lada Priora is about 3,300 rubles.

Installing SE mirrors on Priora

How to remove a mirror on a Priora. We follow these instructions, dismantle the old-style mirrors and install the SE mirrors in the reverse order.

Replacing mirror elements

To replace the mirror elements of the Priora side mirrors, you will need a flat-head and Phillips screwdriver. Use a Phillips screwdriver to unscrew the side mirror from the door. Next, press on the bottom side of the Priora mirror element, a gap will appear. Insert a straight screwdriver into the resulting gap and unclip the lock of the mirror element. Then, disconnect the block with wires from the heater of the mirror element of the Lada Priora. Finally, you can unscrew the side mirror adjustment mechanism. Another replacement option is to simply break the mirror element with a hammer. Installation is carried out in reverse order.

Owners of a Priora in an old body can install turn signal indicators on the mirrors. Of course, you'll have to tinker with the wiring. On mirrors with turn signals, in addition to the adjustment and heating pads, a third pad is mounted. Turn signal block. On the Internet you can find a wiring diagram for the kit for installing a turn signal in the Lada Priora mirrors.

After all the manipulations with replacing mirror elements and installing repeaters. Mirrors should be adjusted to minimize blind spots. There is a universal way to adjust the mirrors, taking into account the body structure of the Priora. All you need to do is ensure that all mirrors do not reflect the same objects. If a car is visible in the left mirror, then it should not be visible in the interior mirror. Thus, the car behind will move from one mirror to another until it overtakes.

Mirror elements of the Lada Priora are a fragile part of the car, without which driving becomes dangerous. Mirrors must be kept clean and tidy. Moreover, you can replace the mirror elements yourself, with just a couple of screwdrivers on hand.

Video

How to disassemble the side mirror on a VAZ 2110, see the following video:

Disassembling side mirrors

You can remove the mirror element from the mirror body in various ways: 1. Unclip the mirror by pressing on its center from the inside, using a curved object or a screwdriver. If you pry the mirror element from the edge, you can break it.

2. You can also remove the mirror element by sharply hitting the mirror body on a soft surface.

To detach the mirror housing from the triangular mount, simply remove the spring, unscrew the adjusting rod and remove its pin.

Assembly and installation of the mirror is carried out in the reverse order.

In order to replace the internal rear view mirror on VAZ 2110-2112 cars, you only need a couple of minutes of time and two screwdrivers:

Discuss

Select it and press Ctrl + Enter

Every now and then there are miracle projects online that bring smiles to the public’s faces. Like, for example, the little UAZ-452.

This time, the tuning masters got to the point of the Soviet “all-terrain vehicle”. The “shorty loaf” caused both laughter and affection with its appearance. The authors of the project, apparently, decided to create a toy SUV, shortening the all-wheel drive off-road minibus by almost half.

Upon completion of the project, the car received a narrow wheelbase and began to resemble Smart cars. Painting in light green and pink colors emphasizes not only the place where the two halves of the UAZ-452 body are welded, but also a certain “toy-like” quality of the car itself.

Netizens left a lot of funny comments about what they saw.

Somehow, projects involving the remaking of the Soviet model GAZ-24 Volga have become frequent online. They have already managed to transform it into a muscle car, giving it unusual shapes. This time, users of the social network Vkontakte heatedly discussed the new concept. Now the Volga has received a futuristic image, which actually amazed the audience.

However, it is worth immediately noting that the car still exists only in the form of a render from one independent designer. But look what he offers.

The shape of the head optics and bumper, as well as the radiator grille, refer us to the original source. The rest of the designer's decision was dictated by modern trends.

The car appears before us in a two-door version, which makes it even more attractive. At the same time, some features from the Mustang are captured.

The author of the project did not specifically disfigure the usual style of the car, adding only laconic modifications. At the same time, it was decided to make the interior sporty.

Search

Choosing a mirror in Kalina

Kalina mirror often requires replacement. This is justified by the difficulties of the first years of driving and the desire to install a more beautiful part.

Replacing a side mirror is not a complicated process; it is important to be careful and follow a certain method

How to make a worthy choice?

Exterior mirrors are one of the most important and important parts of a car. Without them, it is impossible to look at the situation and move along a busy highway. Side view mirrors often require replacement, which is explained by their greatest “trauma” while driving. Before starting work, you need to choose a balanced version of the mirror part. This could be a similar or more sophisticated mirror in Kalina. If you're having trouble choosing, you'll need to familiarize yourself with the basic setup mechanisms.

There are the following types of mirrors:

Ease of use depends on the choice of mechanism. The articulated mirror element is the most common type. Almost all modern cars do not do this.

The lever control is based on a joystick or lever located inside the cab and is pulled to the side by a narrow cable.

Electronic mirror element. this is a modern mechanism. It is found in new cars equipped with many additional features. Its implementation. comfort and safety.

Main advantages of the electronic mechanism:

  • increased appearance;
  • anti-glare coating;
  • heating;
  • Built-in double turn signal.

How to remove

and disassemble the side mirror

by car Lada
Kalina
.

replacing the mirror element with an exterior rear view mirror from Kalina, Grants and Priors

Video review of the self-service mirror element on the external rear view mirror of such cars

Heated mirrors. These are modern developments that simplify the life of every motorist. Increased visibility allows you to better navigate city roads. This option reduces the likelihood of accidents and increases the chances of noticing a dangerous moment. Lastly, the clarity and appearance of this item is much better than the standard part.

The anti-reflective coating on the viburnum mirror allows you to reflect both the sun and bright light. The anti-glare effect ensures good visibility while driving.

Heated mirrors. this is a convenient option. Thanks to this, you don't have to remove snow and ice from the glass. This is a very nice and convenient addition. Finally, there is a built-in signal repeater. This Lada Kalina Mirror element allows everyone to know the traffic about future maneuvers. Which simplifies the trip and makes it safe.

When choosing the best mirror element for Lada Kalina, personal preferences should be taken into account. Of course, do not forget about convenience and safety.

The process of tensioning the timing belt “from start to finish”

We perform all operations on a cold engine. Let's say the belt is now being replaced and the nut on the roller is not tightened. Then just skip "step 1":

  1. We take a crocodile clip for the battery and fix the belt on the pulley. Then use a 17mm wrench to loosen the nut (see photo).
  2. We screw an M8 pin into the threaded hole next to the roller. We screw two nuts onto it. We put a plate on the roller and set the force with a dynamometer - exactly 4 kgf.
  3. The inner nut on the stud should touch the plate. Screw another nut on top, securing the plate in place.
  4. Taking the key “17”, tighten the nut on the roller. Recommended force – 33.2-41.1 N*m.
  5. All that remains is to remove everything unnecessary - the plate and the pin.

On a VAZ-2112 engine, the timing belt tension depends on the force applied to the adjusting key. The force should be 2.0 N*m. And our distance from the axis to the “ear” is 51 mm (see below). Multiply 0.051 by 39.2266 (4 kgf in Newtons) and you will get what you need.

Plate drawing

The plate shown in the drawing is made from steel 2 mm thick. The pattern must be made based on the characteristics of the bending equipment. When bending, the length decreases, which means that the dimensions of the pattern will be larger than 94x75 mm.

Threads for M4 screws are cut in the standard way. Each screw should protrude 7 mm beyond the plane.

Types of windshields

The dimensions of the windshield, standard, and sensor-equipped windows are the same. Additional features and prices will vary. The most convenient way to select is by article number.

Standard

The most common glass without additional options. Installed on the factory rubber seal. The cost of the original glass model is approximately 2.5 thousand rubles; replacement will cost 2 thousand rubles if the work is done in a workshop.

Front windshield on Priora with rain sensor

The rain sensor automatically turns the windshield element and sometimes the washer system on and off. The essence of the operation of the unit is the refraction of an IR light beam. It passes through snow, mud, and water drops, coordinating the operation of a special photocell. The sensor can be rearranged after replacing the glass. The price of one product is from 5 to 9 thousand rubles, installation will cost 2 thousand rubles.

Heated

A product with a heating function can have different versions:

  • heating of the entire working surface;
  • warming up the working instrument area.

The principle of operation of the system is to heat thin filaments inside the glass. The unit operates automatically and switches off periodically, saving battery power and preventing overload of the on-board network. The ice crust thaws quickly in winter, providing good visibility and protection from fogging. Price – 6–10 thousand rubles, installation usually costs 2 thousand rubles.

Installation

Remove the standard side mirrors (pry off the mirror triangle with a screwdriver and remove the three mounting screws). Install the new mirror in the reverse order.

We stretch the turn signal wires to the mirrors:

  1. Remove the door trim.
  2. Remove the turn signal from the fender and disconnect the block. We install plugs instead.
  3. Pull the wires out of the fender and into the interior. To do this, unscrew the sill trims in the cabin, peel back the carpet and felt and pull the black wire in the engine panel. We determine which of the two +12 V wires using a multimeter or a test lamp. We insulate the second wire.
  4. Route the wire from the passenger compartment to the car door through the corrugation.
Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]