How to convert liters of gasoline to a ton. Transition formula.

How to convert liters to tons?

To calculate the mass of fuel, it is necessary to convert the formula used before.
We get: m=V* ρ, in our case: m=V*0.769/1000 (result in tons).

This formula uses the average value of fuel density established by the Ministry of Industry and Energy

Attention! Rostekhnadzor calculates the mass of fuel differently, taking separate values ​​for each type of fuel. Thus, the density of diesel fuel is assumed to be 0.84 t/m3

Based on the above, we can conclude that in the warm season, due to the reduced density of the fuel, its volume will increase, and in the cold season it will decrease.

We hope that this method of converting from one measure to another will be useful to specialists whose duties involve maintaining fuel records. And to avoid fraud when accepting fuel, it is better to enter into an agreement with a reliable company.

Other articles:

Changes in the ruble program card service network:

Changes in the service network for liter and ruble program cards:

Changes in the ruble program card service network:

Sverdlovsk, Nizhny Novgorod, Chelyabinsk, Astrakhan regions, Krasnoyarsk, Khabarovsk territories.

AI95 from Rosneft is conquering the market

Rosneft's Ryazan refinery has exceeded the 1 million ton mark in the production of highly environmentally friendly Euro-6 gasoline.

New methane aromatization technology from Rosneft

Employees of the laboratory of NPK Rosneft have created the latest technology for methane aromatization.

Rosneft began production of motor oils of the highest technological line

The new Rosneft Magnum Racing motor oil for sports cars is a high-tech development from Rosneft.

By continuing to use ruspetrol.ru you agree to the use of cookies.

More information can be found in the Cookie Policy.

RusPetrol LLC, 2007-2020

Reproduction of site materials is permitted with the consent of the owner

His Majesty coefficient

How many liters are in one cube of water according to the meter?
For simplified and correct conversion, the Ministry of Industry and Energy of Russia made a truly Solomon-like decision to introduce fixed average density values ​​for all types of liquid hydrocarbon fuels. Now accountants and all interested parties do not have to agonize over how to convert the number of liters of gasoline into tons. It is enough just to look at the corresponding table of coefficients and substitute the required value from there into the following formula: M = Vρ. It must be remembered that the result of such a simple calculation will be kilograms, which can only be converted into tons.

The coefficients for the most common and frequently used brands of gasoline are as follows:

1. AI-80 = 0.715 g/cm3
2. AI-92 = 0.735
3. AI-95 = 0.75
4. AI-98 = 0.765
5. Diesel fuel – 0.769

In addition, Rostekhnadzor approved its own gradation of coefficients, according to which, for example, the specific density of diesel fuel is 0.84. This is the result of a double system of technical coordinates. It only remains to add that the actual density of the fuel can be measured independently with a special device - a hydrometer.

How do you know which number to put into the formula?

The Federal Tax Service of the Russian Federation, referring to the order of the Ministry of Energy, believes that the density of the fuel should be determined upon receipt of the fuel batch by measuring it with an oil densimeter - a special measuring device such as a hydrometer.

If the device is not available, then use the average density values ​​of diesel fuel, which can be obtained from the local branch of Rostekhnadzor.

Gasoline conversion

The density of gasoline varies in the range of 0.70 kg/l - 0.78 kg/l.

When recalculating, the above formula is used, into which, in the absence of instrumental measurement of fuel density, the average value ρ is substituted:

• For AI-80 0.715 kg/l;
• AI-92 0.735 kg/l;
• AI-95 0.750 kg/l;
• AI-98 0.765 kg/l.

Conversion of kerosene

The density of kerosene varies, depending on the brand, in the range: 0.775 kg/l - 0.85 kg/l. Examples:

• lighting kerosene brand KO-30: density 0.790 kg/l;
• lighting kerosene brand KO-20: density 0.83 kg/l;
• Hydrogenated aviation kerosene for supersonic aircraft: density 840 kg/l. Etc.

Conversion of kerosene from liters to tons is carried out using the method described above after determining or establishing the density value.

Call the number. It’s convenient with us, delivery 24/7

Density of different types of diesel fuel

How many cubic meters of gas are in a 50 liter propane cylinder?

All diesel fuel is divided into different types and is not standard. There are at least three types: summer, winter, arctic fuel. The density is different, and in order to calculate how many liters of diesel fuel are in 1 ton, we need to know this value.

So, summer diesel fuel has a density of 860 kg/m3. This diesel fuel is distinguished by its operating temperature range. At 10 degrees above zero, this fuel may begin to solidify. The temperature at which a flash is possible is 45 degrees above zero. It is usually sold in hot countries.

Winter diesel fuel has a density of 840 kg/m3. It does not harden at temperatures not lower than -35 degrees. Therefore, this fuel is effective in winter. Ignition is possible at 40 degrees Celsius.

There is also Arctic diesel fuel, which is rarely found at gas stations in the city. Its density is 830 kg/m3. It can ignite at 35 degrees Celsius.

If this product is sold in large volumes, the calculation is made in tons, not in liters. This is because liquid can contract or expand at low and high temperatures, respectively. Consequently, the volume will increase or decrease, but the mass will remain constant. Of course, you can buy it in liters, but then there may be a high error for better or worse for the buyer or seller.

Calculator for converting gasoline from liters to tons

How long can you store gasoline in a plastic canister? expiration date of gasoline. gasoline brands and shelf life

To make it easier to transfer fuel, a special calculator is used. Thanks to it, you can convert liters of any gasoline into tons and calculate the cost per unit. The calculator program can calculate the result if you enter data on the type of fuel and its quantity. Indicators are entered manually or by selecting existing data.

What is it for

The need to recalculate fuel arises among large enterprises and retail chains. The supply of large volumes of fuel is easier if its volume is indicated by tonnage. But for warehouse operations, write-off of fuel when used in transport, and other accounting calculations, an indicator in liters is required.

To prevent mistakes that could cause losses, it is necessary to distinguish between the concepts of mass and volume. A ton is the weight of fuel, i.e. its mass, which is equal to 1000 kg. And displacement is the volume of fuel mass. And due to the density of gasoline, the volume relative to the mass cannot be equivalent.

Odds

It is quite difficult to explain visually the process of the relationship between weight and displacement. But knowing the appropriate fuel units and coefficient, the conversion of gasoline is quite simple. The coefficients are determined in the laboratory; independent calculation is not possible. Therefore, ready-made data for each type of fuel is used for calculations:

Conversion formula

To convert fuel from one indicator to another, you need to turn to physics, where to determine the density (p) you need to know the volume (v) and mass (m). From the reverse, you can get a formula for calculating volume from mass:

v = m / r

Conversely, obtaining tonnage from displacement is carried out according to the formula:

m = v X p

Obtaining data when transferring fuel is not limited to regular formulas. The reason for this is the difference in the measurement system, because weight is expressed in kilograms, and volume in cubic meters. Therefore, it is necessary to determine how many cubic meters make up 1 liter.

1000 l. = 1 m3, which means 1 liter. = 0.001 m3

When the conversion formula and the applied coefficients of different types of fuel are known, a mathematical procedure is performed that allows you to convert gasoline into tons. For example, it is necessary to obtain the mass of 1 liter of AI-98 gasoline. To do this, the calculation is performed as follows:

1 x 0.001x 776.0 = 0.776

Using a simple, understandable formula, the fuel indicator, taking into account the density, can be converted into any unit of measurement.

Effect of temperature on mass calculation

There is another important indicator that directly depends on the result of fuel conversion calculations. This indicator is the temperature from which the density of the fuel changes. It is known that as the temperature increases, the density decreases, and as the temperature decreases, it increases.

Therefore, calculation using the formula without taking into account the temperature conditions of gasoline storage will be erroneous. GOSTs do not contain density indicators regarding fuel types and temperature fluctuations, but there is a method for calculating it. Thus, the density for a particular fuel has a range depending on its temperature.

Calculating density on your own does not make sense. There are reference books and tables that indicate extreme indicators regarding the temperature regime of all types of fuels and lubricants. It is enough to know the temperature and volume to convert liters of fuel into tons.

Why use oil conversion in kg?

Our online calculator for converting kg of oil to liters will make it possible to find out the weight of one liter or more of motor oil, and will also allow you to recalculate the weight in kilograms or tons of any other type of oil, fuel and other fuels and lubricants. Or, on the contrary, understand how many liters of raw materials should be at a certain weight.

Such a transformation may be needed not only for reporting in organizations involved in fuel and lubricants or transport companies, but also for ordinary car owners. How?

As an additional indicator of the need for an oil change. After all, the weight of one liter will change by 4 - 7% during wear and tear over 1-2 years. And if you focus on the average density, then by weighing still fresh oil you can determine its quality. Low-quality motor oil may contain harmful additives, due to which it will have increased density and, accordingly, more weight. Or vice versa, due to an insufficient amount of additives for a particular type of oil, the mass will be less than it should be according to the characteristics specified by the manufacturer.

The technical documentation of a high-quality lubricant contains stated characteristics, including not only viscosity, temperature, base number and ash content, but also density at 20°C (kg/l or kg/m3)!

And also, knowing the fact that the volume of oil increases when heated, some suppliers, when filling cans on the packaging line, heat the lubricant and pour it according to the volume, rather than weighing it. As a result, the canister of oil on the counter will stand compressed and several grams lighter, because, in fact, it will not be topped up. An individual buyer will not notice a shortage of a few milliliters, but on the overall scale of production, the difference is significant. Therefore, by weighing such oil and using a conversion calculator, it will be possible to identify such a deficiency.

How to save on gasoline

How to convert liters of gasoline to a ton. Transition formula

Oddly enough, people quite often ask on the Internet about how to convert liters of gasoline to a ton. This transition is not as straightforward as it seems, because a liter is a measure of volume, and a ton is a measure of the weight of a substance. In order to convert liters of gasoline to a ton, you need to understand the difference between volume and weight. But this difference is not nearly as clear as it seems.

What is it for

Most often, such information is needed to account for different types of fuel. Such a recalculation is necessary for logisticians, accountants, warehouse workers, drivers and all those who regularly account for fuel consumption and storage. Meanwhile, the answer to the question of how to convert liters of gasoline to a ton is quite simple and does not require any special knowledge.

Transition formula

You can learn how to convert liters of gasoline to a ton from a school physics course. The standard formula relates the volume V and mass m through a certain quantity called the density ρ of the substance. The transformation looks like this:

ρ = m/V

From here we can derive an inverse formula, suitable for converting any substance from a weight measure to a mass measure. This also applies to various types of fuel, such as diesel fuel and gasoline. Liters are converted to tons after converting accounting values ​​to the SI system. The transition formula looks like this:

m = V × ρ.

Conversion to SI

By default, the formula is correct for mass expressed in kilograms and volume described in cubic meters. Accordingly, the question of how to convert liters of gasoline to a ton requires the use of certain coefficients.

One thousand liters is one cubic meter of liquid or gas. Accordingly, one liter is 1×10-3 m3. We do the same with tons. One ton of any substance is 1×103 kg.

Density of gasoline

Now, from reference tables, we determine the density of common brands of gasoline. It is presented below:

• The density of the AI-92 grade corresponds to 735 kg/m3.
• The density of the AI-95 grade is 750 kg/m3.
• The density of the AI-98 grade is 776.5 kg/m3.

Naturally, the density of gasoline may vary slightly, depending on the various impurities with which modern fuel is saturated. But for basic estimates, greater accuracy is usually not needed, and we can easily use standard data.

As you can see, the density of gasoline is much less than the density of water. This is why we sometimes see stains of this substance on the surfaces of puddles. To convert liters to tons, simply substitute the selected values ​​into the formula.

Thus, one liter of AI-92 gasoline weighs 1 × 10-3 × 735 = 0.735 kg - slightly less than one kilogram. To convert to tons, an additional factor must be used. For example, we calculate the weight of 500 liters of AI-95 gasoline:

m = 500 × 10-3 × 750/103 = 0.375 tons.

But a similar volume of gasoline of another brand, for example, AI-98, will be calculated as follows:

m = 500 × 10-3 × 776.5/103 = 0.38825 tons.

Density Tables

The density of a substance is one of the most important physical indicators of an object. It is equal to the ratio of volume to its mass, expressed in kilograms. This characteristic depends on temperature. The higher the temperature, the lower the indicator, and vice versa.

This process is directly related to the phenomenon of thermal expansion. That is, with stable body weight, the volume of the substance increases. There is no need to determine this physical criterion yourself. To do this, just use the density tables.

Vladimir Khomutko

auto RU

For example, following them, you can determine that the fuel has the following indicators:

• AI-76 - 715 kg/cu.m. meter;

Can the density of a flammable substance not correspond to the table? Yes, it's quite possible. The fuel indicator may change up or down if there are foreign impurities in the composition. There are more than enough of them in modern gasoline. The point is to reduce the cost of gasoline; it can be diluted with acids. The composition may even contain organic substances, lead, alkali. There is even water in the combustible mixture.

Fractional composition of gasoline

All these indicators can only be determined in a laboratory setting. Therefore, it is not possible for consumers to determine the quality of fuel by analyzing the chemical composition.

However, the fluctuations are insignificant. Therefore, standard tables are quite suitable. It is better if the density tables at the enterprise are approved by internal order, and they are the ones that will be used for permanent work. The fact is that in different sources on the Internet, the indicators vary insignificantly.

Read also:

How is a gasoline test carried out?

Gasoline weight.

There are several brands of gasoline that differ not only in octane number, but also in density and, accordingly, in weight.

• in one liter of gasoline grade AI 76 - 0.715 kg, respectively, in one ton there will be 1398.6 liters
• in one liter of AI 92 gasoline - 0.735 kg, respectively, in one ton there will be 1360.5 liters
• in one liter of AI 93 gasoline - 0.750 kg, respectively, in one ton there will be 1333.3 liters
• in one liter of gasoline grade AI 76 - 0.840 kg, respectively, in one ton there will be 1190.4 liters

It turns out that the higher the quality of gasoline, the heavier it is.

Let's take AI gasoline as a basis - 95. The density of gasoline is approximately 0.80 - 0.75.

One ton is 1,000 kg.

We divide this thousand by 0.80 or 0.75. This turns out to be 1,250 or 1,330. That is, in about one ton there are approximately 1,200 liters or so. It all depends on what kind of gasoline (what density it has).

CooLWarK

6 years ago

The displacement depends on the density of a particular brand of gasoline.

There are 1000 kg of AI-92 gasoline in 1 ton, therefore, knowing its density is 0.76 kg, we find the volume - 1000: 0.76 = 1315 liters.

By analogy, we will find the volume for AI-95 gasoline - 1000: 0.75 = 1333 liters.

AI-98 - 1000: 0.78 = 1282 liters.

For the AI-95 gasoline brand, which is practically the most popular brand at the moment, the weight of one ton will be about 1333 liters. But the weight of one ton of AI 92 grade will be more - it’s 1360 kilograms.

Do you know the answer?

How to convert 1 kg of gasoline to 1 liter of gasoline?

What should cost more, a loaf of bread or a liter of gasoline?

Is it realistic to predict that gasoline will cost 50 rubles per liter? Why?

How much does a liter of AI92 gasoline cost in 2022?

How much oil is needed for 1 liter of gasoline for a trimmer (in a lawn mower)?

How much oil per 1 liter of gasoline in a chainsaw?

1 in 40 is how much oil to add per liter of gasoline? How to measure?

1 in 50: how much oil is there per liter of gasoline?

What is the final cost of one liter of gasoline in Russia based on?

How much does 1 liter of gasoline weigh?

How many liters of 95 gasoline are in one ton?

On average, the density of fuel at 20 ºС is 0.75 g/l. Using the directory data and performing a simple calculation, we find that the volume of one ton of gasoline ranges from 1282 to 1429 liters.

How many liters of gasoline are in 1 ton?

V = 1000: 755 = 1.32 liters, but to correspond with tonnage, and not with kilograms, multiply the result by 1000. So gasoline, weighing 1 ton, corresponds to an occupied volume of 1320 liters.

How many liters of AI 92 are in one ton?

The weight of 1 liter of 92nd is 740 grams. Divide 1000 by 0.74 - it turns out approximately 1351.35 liters.

How to convert liters to tons of gasoline AI 92?

This Resolution provides formulas for converting gasoline and diesel fuel from liters to tons:

1. Gasoline: M = V x 0.730 / 1000, where - M - volume of gasoline (except for aviation), in tons; ...
2. Diesel fuel: M = V x 0.769 / 1000, where - M is the volume of diesel fuel, in tons; ...
3. Liquefied gas:

How many tons of gasoline are in 1 cubic meter?

One cube of gasoline (1 m3 of gasoline) contains 0.75 tons. There are 1.33 cubic meters in one ton of gasoline. To convert tons to cubes and back, use the online calculator for converting tons to cubes (you need to know the density for the calculation).

How many kg are in 1 liter of gasoline?

Answer: 1 kg of gasoline is equal to 1.333 liters. Question: How many liters are in a kilogram of gasoline? Answer: 1 liter of gasoline is equal to 0.75 kilograms (kg).

How to convert tons to liters of gasoline?

Converting gasoline from tons to liters can be done using the formula: M = V * R, l.

How to correctly convert liters to tons?

How to convert liters to tons? To calculate the mass of fuel, it is necessary to convert the formula used before. We get: m=V* ρ, in our case: m=V*0.769/1000 (result in tons).

How much does a 20 liter canister of gasoline weigh?

The 20 liter steel canister SPEC 2770 is designed for storing and transporting gasoline and diesel fuel. Dimensions: 480x360x160 mm. Weight 2.2 kg.

How many liters of liquefied gas are in one ton?

Having a ton of gas with 60% propane and 40% butane at a temperature of -15 ° C, we can find the density of the gas, which in our conditions is 0.572 kg/l. Now we find out how many liters are in a ton: V = m / p = 1000 (kg) / 0.572 = 1748.25 liters.

How to convert liters to tons of gasoline calculator?

Converting gasoline from liters to tons can be done using the formula:

1. M = V * R, i.e.
2. AI 76 - 0.715 g/cm3.
3. AI 80 - 0.715 g/cm3.
4. AI 92 - 0.735 g/cm3.
5. AI 93 - 0.750 g/cm3.
6. AI 95 - 0.750 g/cm3.
7. AI-98 - 0.765 g/cm3.

Ways to save

In addition to knowing the specifics of converting volume units, a household consumer must know the rules for saving resources in order to reduce the amount of water consumed:

• eliminate leaks from taps - even minor digging can lead to a serious loss of resources;
• do not leave water open unless necessary;
• soak plates before washing to reduce the duration of the procedure;
• use a diffuser on the kitchen faucet;
• find useful uses for used water;
• instead of taking baths, wash in the shower;
• use water heating with a boiler;
• select the optimal diameter of pipelines for the water supply.

These simple measures will help minimize unnecessary energy consumption and reduce the size of utility bills.

Converting the unit of measurement for water, like other liquids, from cubic meters to liters is not difficult. But for convenience and to obtain more accurate data, the volume is also displayed on the meters in fractions of a cubic meter, indicated in red. In this case, the third digit after the decimal point will indicate the number of liters.

How to convert motor oil to kilograms and liters?

To accurately determine the weight of one liter of oil, or vice versa, to convert kg to liters, you need to know the passport data of the density of the product being tested. When converting units of measurement, the formulas are used: m = p * V and V = m / p.

Oil conversion table from liters to kg

The denser the oil, the less dependent the weight and volume on temperature conditions.

How to use a calculator for converting motor oils from liters to kg?

By default, you can find out how much 1 liter of oil weighs in kg, and to make your own conversion of oil into kg or liters you need to fill in the fields with the necessary data or select the average value if conversion of units of measurement of the amount of engine oil is necessary.

1. Enter the volume in liters or weight in kg/tons (you can independently set the required unit of measurement);
2. Select viscosity by clicking on it if the engine oil will be transferred (the average density value will be used, which will be displayed in the “density field at +20°C”) or enter your oil density value if you know it (you can select kg/ l or leave kg/m3, depending on which units are indicated), which should be in accordance with the reference data of the characteristics;
3. If the temperature of the oil (or other fuel liquid) differs from the nominal laboratory value, then in the “temperature correction” field, enter (or use the up and down arrows) your difference value (how many degrees more or less);
4. Mark for which (fresh or used) oil the recalculation should be made. By default, the calculator makes the conversion in kg or l, focusing on new motor oil without running in the engine, however, during operation, its indicators change and in the case of used oil, an amendment must be taken into account . If you need to convert from liters to kilograms (and the reverse conversion) of another type of lubricant or fuel, then leave the checkbox by default.

After all these settings, you will immediately see how many kilograms a certain number of liters of oil or other fuel and lubricant weigh.

How to convert liters of gasoline to tons

It would seem that there is nothing complicated here: converting liters of fuel into tons? Know, divide all your indicators by 1000, and everything will be fine. Ah, no! It won't work that way. After all, the general form of the translation formula also includes an indicator of the density of the substance, which radically changes the picture (see the following formula below):

Mt=Vl/(1000*P), where Mt is the required mass of the substance, calculated in tons, Vl is its volume, presented in liters, P is density, g/cm3.

Features of converting gasoline of different brands from liters to tons

Let us now imagine the conversion of liters to tons, choosing gasoline as the very substance discussed just above. For an adequate calculation process, it is worth studying the density values ​​of its most popular brands. So, for example, AI-76 has a density equal to 0.715 grams per cubic centimeter, AI-92 - 0.735 g/cm3, AI-93 and AI-95 - 0.75 g/cm3, AI-98 - 0.765 g/cm3 .

Thus, if we have, say, 250 liters of AI-76, then applying the formula for converting liters of gasoline to tons will give the following value: Mt=250/(1000*0.715)=0.34965≈0.35 tons.

If, say, 1000 liters of AI-98 are available, then the resulting result will be Mt=1000/(1000*0.765) ≈1.307 tons.

The role of the density indicator of a substance in calculating its mass in tons

As we see, the density indicator of a substance is crucial. Thanks to him, 1000 liters do not always equal 1 ton. This is only possible for water.

Most often, these indicators do not completely coincide. In the examples above, a match did not occur even once.

In other words, we did not get the situation in which, say, 200 grams of gasoline would be equal to 0.2 tons of the same substance.

Again, for example, if this indicator for AI-92 gasoline is 735 g/cm3, as already mentioned in this article, then in order to get a ton of this substance it is necessary to measure 750 liters, since the following equality becomes true: Mt =735/(1000*0.735)=1 ton.

Knowledge of such features of flammable liquids is very important and has very practical applications. For example, when buying 1000 liters of AI-92 fuel, anyone will now understand that we are not talking about 1 ton at all, that these are completely different quantities

This means that this fact must always be taken into account when concluding certain transactions.

Convert liters of fuel to tons

Having studied in detail the formulas for converting petroleum products into kilograms, it becomes clear that the density of water is much greater than that of fuel. Therefore, you can see flammable fuel stains in puddles at gas stations.

For convenience, we present formulas for converting liters of fuel to tons. To use them, you only need to know the amount of fuel you want to transfer. Next, follow the calculations using the formula:

1. AI-76 = (Number of liters x 0.715) / 1000;
2. AI-92 = (Quantity x 0.735) / 1000;
3. AI-95 = (Quantity x 0.750) / 1000;
4. AI-98 = (Quantity x 0.777) / 1000;
5. summer diesel = (Quantity x 0.86) / 1000;
6. winter diesel fuel = (Quantity x 0.84) / 1000;
7. Arctic = (Quantity x 0.83) / 1000.

YouTube responded with an error: The request cannot be completed because you have exceeded your quota.

Bibliography:

• Gasoline - Wikipedia
• Economides, M. The color of oil. The world's largest business: history, money and politics / Economides M., Olini R. Publishing house: “Olympus-Business”, 2004. 256 p.
• PJSC "Tatneft" - Main portal "Tatneft"
• RussNeft - www.russneft.ru

Conversion of diesel fuel: liters to tons

In order to recalculate diesel fuel, you need to apply the following formula:

This formula is for determining volume. It follows from this that the mass will be equal to:

• V – volume (liters);
• M – mass (tons or kilograms);
• p – density.

The density for different types of diesel fuel is already indicated above. It must be substituted for the p value. With two known quantities, we can easily calculate how many liters are in 1 ton of diesel fuel, or vice versa.

We also note that the Ministry of Industry and Energy of the Russian Federation averaged the density of diesel fuel for accurate recalculation. It is 0.769 kg/liter. It must be used for recalculation.

Gasoline weight.

There are several brands of gasoline that differ not only in octane number, but also in density and, accordingly, in weight.

• in one liter of gasoline grade AI 76 - 0.715 kg, respectively, in one ton there will be 1398.6 liters
• in one liter of AI 92 gasoline - 0.735 kg, respectively, in one ton there will be 1360.5 liters
• in one liter of AI 93 gasoline - 0.750 kg, respectively, in one ton there will be 1333.3 liters
• in one liter of gasoline grade AI 76 - 0.840 kg, respectively, in one ton there will be 1190.4 liters

It turns out that the higher the quality of gasoline, the heavier it is.

Let's take AI gasoline as a basis - 95. The density of gasoline is approximately 0.80 - 0.75.

One ton is 1,000 kg.

We divide this thousand by 0.80 or 0.75. This turns out to be 1,250 or 1,330. That is, in about one ton there are approximately 1,200 liters or so. It all depends on what kind of gasoline (what density it has).

CooLWarK

6 years ago

The displacement depends on the density of a particular brand of gasoline.

There are 1000 kg of AI-92 gasoline in 1 ton, therefore, knowing its density is 0.76 kg, we find the volume - 1000: 0.76 = 1315 liters.

By analogy, we will find the volume for AI-95 gasoline - 1000: 0.75 = 1333 liters.

AI-98 - 1000: 0.78 = 1282 liters.

For the AI-95 gasoline brand, which is practically the most popular brand at the moment, the weight of one ton will be about 1333 liters. But the weight of one ton of AI 92 grade will be more - it’s 1360 kilograms.

Do you know the answer?

How to convert 1 kg of gasoline to 1 liter of gasoline?

What should cost more, a loaf of bread or a liter of gasoline?

Is it realistic to predict that gasoline will cost 50 rubles per liter? Why?

How much does a liter of AI92 gasoline cost in 2022?

How much oil is needed for 1 liter of gasoline for a trimmer (in a lawn mower)?

How much oil per 1 liter of gasoline in a chainsaw?

1 in 40 is how much oil to add per liter of gasoline? How to measure?

1 in 50: how much oil is there per liter of gasoline?

What is the final cost of one liter of gasoline in Russia based on?

How much does 1 liter of gasoline weigh?

This is interesting: How to remove a headlight from a Priora

FAQ

• How much does a liter of oil weigh?

  1 liter of synthetic motor oil with a viscosity of 5w30, the density of which is 863 kg/m³, is 0.86 kg

  .
  If the density indicator, due to the available additives, is higher, for example, 910-940 kg/m³, then a liter canister of engine oil will weigh more, up to 940 grams
  . The average weight of 1 liter of vegetable oil at room temperature is 925 g, and will vary depending on the crop from which it was pressed.

  When weighing, it is worth remembering that depending on the ambient temperature, the density of the oil may change, so to more accurately calculate how much 1 liter of oil weighs

  , whether motor, sunflower or vegetable, take into account the correction factor.
  Every +10 degrees
  Celsius, from the nominal value at which density is measured in laboratory conditions (+20°C), will make
  each kilogram of oil 10 grams lighter
  .

• How much does a liter of 5w40 motor oil weigh?

  A liter of 5w40 engine oil whose density is in the range of 867…872 kg/m3 weighs 870 grams. However, this is an average figure, since there are 5W-40 synthetic oils that weigh 910 grams. The final weighing result will depend on the density of the individual brand of oil. The weight of such motor oil in packaging is usually 955 g.

• How much does 5 liters of oil weigh?

  The average weight of oil in a canister is 5 liters. It weighs 4.55 kg. You can find out exactly how much 5 liters of oil weighs only by knowing the specific gravity (density) of the liquid you are interested in. For example, motor oil with a density of 910 kg/m³ weighs exactly 4 kg 550 grams without taking into account the weight of the canister itself. Sunflower oil will be heavier - 4.65 kg because it has a density of 0.930 kg/l.

• How much does 200 liters of oil weigh?

  A two hundred liter barrel of machine oil with a viscosity of 0W40 with an average density of 852 kg/m³ will weigh 170 kg

  excluding the weight of the container itself.
  On average, the net weight of both motor oil and sunflower oil, with a density of 930 kg/m³ at normal atmospheric pressure (760 mm Hg) is 186 kilograms
  .

• How much does a 208 liter barrel of oil weigh?

  A 208 liter small drum is equal to 55 US gallons. Most motor oils for diesel engines are supplied at 208 liters. How much a 208 liter iron barrel of oil weighs will depend on its viscosity, or rather the density it has. So, the weight of oil of this volume will be from 180 if it is synthetic and up to 190 kilograms

  semi-synthetic 15W40 or transmission 75W-90. The weight of one empty metal barrel of this type is from 18 to 25 kg, so in the characteristics of the oil it is often written that a barrel of oil of 208 liters weighs 208 kilograms, meaning the total weight, and not the net weight.

In Bashkiria, both the birth rate and death rate decreased in the first quarter of 2022

Infant mortality has also increased: in January-March last year, 72 infants (children under the age of 1 year) died, in the first quarter of this year - 76. The Ministry of Health expects to overcome the problem by implementing the action plan defined by the national project “Health”. The causes of death remain the same. Mortality from cardiovascular diseases increased by 16%, mortality from cancer decreased by 3%, and from external causes - by 29%. But at the same time, the death rate from road accidents increased by 30% - in the first quarter, 21 more people died on the roads. Earlier, Bashinform reported that scientists from the Institute of Strategic Studies of Bashkiria have recorded certain features of the distribution of causes of death depending on place of residence. Most people die from infections and cancer in cities. In villages, the most common causes of death are diseases of the respiratory system, digestion, genitourinary system and external causes.

Calculator for converting liters of engine oil to kg

The mass of machine (engine or transmission) oil depends on the group chemical composition. Its weight is determined by the density of the substance located in a unit volume (kg/m3). The density of the oil is determined with a pycnometer at +20 °C since it directly depends on the temperature - the higher it is, the lower the density of the oil product.

To convert liters (l.) of motor oil into kilograms (kg) or vice versa, you need to focus on the density value, which can be seen in the table (average value) or the characteristics provided by the lubricant manufacturer (exact data). If the temperature of the oil product differs from that provided, then a correction factor is used.

How much does 1 liter of motor oil weigh?

The ratio of mass to volume of oil is determined by its density. But, this parameter, like viscosity, will greatly depend on temperature, so in order to accurately convert liters of engine oil to kilograms, it is necessary to carry out measurements at room temperature. However, it is also worth taking into account the fact that the density will change depending on the quantity and quality of additives, and if it is necessary to convert l/ton of used oil to kg, then the density parameters will also change due to impurities of wear products and carbon deposits (increases by 4 - 6 %).

To determine the weight of 1 liter of oil, the density formula is used: ρ = m / V, where p is the density (kg/m³); m – mass (kilogram); V – volume (m³).

1 liter of engine oil will average 0.850... 0.910 g, depending on its density.

Motor oil density table

The density index of motor lubricant varies in the range of 0.84 - 0.91 kg/l depending on the SAE classification and kinematic viscosity (cSt), and besides, it is very unstable and drops with increasing temperature.

The density of semi-synthetic motor oil is 3 - 7% higher than that of pure synthetics.

Please note that the higher the temperature of the oil, the lighter it is in the same volume ! This means that to convert engine oil from liters to kg or from kilograms to liters, take into account the temperature and use the correction if it differs from the reference value of 20 degrees Celsius.

If the temperature of the oil product is above +20⁰С, then the correction value must be subtracted, and if lower, then it must be added to the density indicated in the characteristics. A correction factor is applied to each degree of temperature difference.

The correction factor, when changing by one degree from the laboratory value, of a single oil with a known density, will differ and vary from 0.000867 with a density of 0.739 kg/l to 0.00062 with a density of 0.915 kg/l.

Density correction factors

Converting diesel fuel from liters to tons and back

Currently, many consumers are wondering about the correct conversion of diesel fuel from tons to liters and vice versa. The same problem remains no less significant for accountants who keep records of diesel fuel, intended mainly for motor vehicles.

In order to convert the volume of fuel from tons to liters, use the formula: V = M / ρ,

where V is the volume of fuel in liters; M – mass in tons; ρ – density, kg/m3.

GOST 305-82 for various brands of diesel fuel - winter, arctic and summer, at a temperature of 20 ° C, contains a single density value (kg/m3).

When the ambient temperature drops, the density of diesel fuel becomes higher, and as it increases, it decreases. It follows that the volume of liters in the same amount of fuel fluctuates depending on the temperature.

The density of diesel fuel was calculated in accordance with the calculation of kilograms per liter, so identifying the amount of fuel in liters will be done using the formula: V = (M / 0.769) x 1000, l.

https://youtube.com/watch?v=WfeG4RtkbM4

In order to convert the amount of fuel into tons from liters, use the inverse formula: M = V x 0.769 / 1000, (t),

V – fuel volume, (l); M – mass, (t); 0.769 – density, (kg/l.)

It is worth emphasizing that Rostechnadzor has established its own average fuel density coefficients for converting liters into tons, including for diesel fuel - 0.84 t/m3.

The diesel fuel calculator is here: ng-logistic.ru

Conversion formulas

The volume and mass of a liquid are related by the formula: M = V ρ,

where M is the mass of the liquid in tons, V is its volume in m³, ρ is the density in t/m³.

In real practice, managers prefer to deal with tons (fuel purchases) and liters (sales). If the above formula is expressed in terms of these quantities, it will look like this:

M = V ρ /1000

• where ρ is the density of the liquid in kg/l (numerical value),
• V – volume of liquid in liters;
• M – mass of liquid in tons.

To find out, for example, how much 1000 liters of diesel fuel with a density of 0.83 kg/l weigh, we substitute the values ​​in the formula to obtain the mass in tons:

M = 1000 · 0.83 / 1000 = 0.83 t.

The reverse conversion (from tons to liters) is carried out using the formula V = M · 1000/ρ (weight in tons, density in kg/l, volume in liters).

Fuel (diesel, gasoline, and kerosene) physically do not have a constant density - it depends on the temperature of the liquid, decreases with increasing temperature, and increases with its fall.

That is why the conversion of the available mass of fuel into volume for each value of the liquid temperature will give different values. A change in temperature, as well as the possible evaporation of part of the liquid, will change both the mass and, accordingly, the density of the substance. If we neglect evaporation, then the main action when converting mass into volume and vice versa becomes the establishment of the density of the liquid.

This is interesting: How many liters are in the cooling system of the Opel Omega A