The hood cable of the VAZ 2114 is broken: how to open it and what to do?

Owners of a VAZ-2114 passenger car often face the same type of problem: opening the hood with a broken cable. Why could it break? And if the VAZ-2114 hood cable breaks, how can you open it yourself? Every driver of a vehicle needs to know such nuances, because such breakdowns most often happen unexpectedly.

Functions of the hood cable

Car owners call a cable drive nothing more than a cable drive. The hood protects the internal parts of the vehicle (such as the engine). To repair them, you have to often open its lid. A cable drive or “cable” allows you to do this. It serves to prevent the hood from being opened from the outside.

The scheme of its action is simple and is as follows:

a cable drive connects the hood lock to the vehicle interior;
the cable begins to operate using an electromagnetic actuator;
using a switch, the electromagnetic circuit is closed;
an electrical impulse is supplied to the actuator by the controller;
The lock opens if the car is disarmed.

Although different passenger car models differ in their design, the sequence for eliminating the problem is standard.

Replacement procedure

So, it was possible to open the hood on a VAZ 2114 or VAZ 2115. Now you can do the actual repairs:

First, go to the store and pick up the product you need to replace. Multi-core cables are more expensive than their single-core counterparts, but they are also more durable - it is recommended to take this point into account when choosing.
Find the end of the torn product, which belongs to the interior part, and tie a cord to it. Remove the handle and pull the resulting system towards you - the cords will be pulled into the interior.
Repeat the procedure in reverse order - tie a new cable to the cord from the interior and pull it into the engine compartment of the vehicle.
Now you can connect the new product with the handle and the locking mechanism.

All that remains is to check the functionality of the new system, first of all, for the reliability of the connection, and you can continue to operate the car.

Standard solution to the problem: open the hood if the cable in the car breaks

Experts advise opening the hood if the cable breaks only when the engine has cooled to normal temperature. This precaution is necessary to avoid getting burned during this procedure.

The algorithm of actions is as follows:

Inspect the lever for opening the lock and whether there is a break in the cable in this place (the lever is located inside the car, so inspection is easy).
If the end of the cable drive is visible, then it is quite easy to eliminate the gap and open the hood lid too - you need to pull the piece of cable.
This procedure may require pliers because the lid was previously opened using electricity.

It is possible that during the opening process you will have to break the lock manually. But in any case, after this the entire structure should be replaced so that the cable drive does not break again.

Replacing the cable

After the hood lid has been successfully opened, you need to install a new mechanism cable. To do this you need:

Buy a new cable. In the store you can find two versions of its design: single-core and stranded. We recommend using the second option, as it has increased strength, service life and reliability.
Next you will need a cord, which should be tied to the end of the cable in the hood.
From the interior side, pull the old cable and insert the cord into the interior. At the same time, replace the O-ring in the body through which the hood mechanism element passes.
Similarly, tie a new cable to the cord and pull it out into the engine compartment.
Attach it to the lock and to the handle in the interior.
Be sure to check that the mechanism is working properly.

Thus, you have become acquainted with quick and simple instructions on how to open the hood of a VAZ 2114 and are probably convinced that there is nothing complicated about it. Good luck on the roads and don't break down.

Modern VAZ models are equipped with a special handle located in the vehicle interior, which is designed to open the hood from the driver's seat. But what to do if the cable, which is actually responsible for this operation, has come loose?

If the hood cable breaks, then the car owner, before starting repair work, needs to gain access to the required compartment of his vehicle.

We open the hood when the cable is torn, removing the radiator grille

If the cable drive breaks not in the cabin, but somewhere inside under the hood, then experts recommend using another method. It consists of removing the radiator grille and thus getting to the broken cable.

This procedure should not cause difficulties even for a novice car enthusiast. It includes several stages:

Carefully read the operating instructions for the VAZ-2114 model.
According to the instructions, remove the radiator grille.
Find the broken cable and fix the problem.

You can try to reach a piece of the cable drive through the radiator grille without removing it. This can really be done through the air intake. To do this, use some handy object (for example, a hook made of wire or a knitting needle) to reach the tongue that is attached directly to the cable drive, pull it, and the hood lid will open.

Opening the hood if there are problems with the cable

There are two ways to open the hood of a VAZ 2114 or 2115. The first, when the car owner was incredibly lucky and the hood cable broke directly inside the vehicle:

Locate the end of the damaged product;
Grasp it with something convenient - most often in this case, ordinary pliers are used;
Pull the product towards you - this will allow you to open the hood and begin a full repair.

The second option is much more complicated - the hood cable broke, but the location of the damage turned out to be inaccessible to the car enthusiast. In this case, to open the engine compartment on a VAZ 2114 or on another model from the same manufacturer - VAZ 2115, you will need to perform a more difficult procedure:

Move the vehicle to the vehicle inspection pit.
Using the key to “Eight”, dismantle the protection of the power unit, which will allow a person to have somewhat limited access to the desired compartment of his car.
Before continuing work, it is recommended to check the temperature of the engine - if it is hot, you can easily get burns if the unit comes into contact with your hand.
After this, you need to put your hand into the space between the car’s radiator and its power unit, feel for the special spring of the locking mechanism and move it in the direction of the car’s batteries.

If everything is done correctly, the car hood should open easily. Unfortunately, sometimes in the procedure described above a person experiences certain difficulties and cannot carry out his plans. In this case, you can do something a little differently, however, this will require physical destruction of the radiator grille, which will allow easy access to the locking mechanism. Naturally, a deliberately broken product will have to be purchased and installed again.

Ways to open the hood

In different situations, different methods are used to cope with the described malfunction. Among the most common cases are the following:

cable breakage directly next to the remote lock opening drive lever. In that case, it will be enough to grab its end sticking out in the cabin using ordinary pliers and pull it hard. In this case, it is necessary to pull on the cable itself, and not on its braid.
a cable breaks in the cabin when it is impossible to grab it with pliers. In this case, you will need bent wire. With its help, you can open the hood, for example, in order to change the oil, even when pliers do not help. To do this, you will need to bend a hook out of wire, insert it into the gap in the air duct or between the body and the hood, hook it onto the damaged cable and pull it until the hood lock opens.
The cable breaks far from the lock drive lever. In this case, you can try to perform the operation through the air duct. Here you will also need a hook bent from hard wire. It is inserted into the left air duct and a cable is hooked with it.
cable breakage directly in the area where the lock mechanism is installed. Typically, such a lock is installed in front of the hood, and therefore it is useless to pull on it. As a result, the engine compartment lock can only be opened from below, by driving the car into a pit. To do this, you need to pay attention to the crankcase protection by removing it. For this purpose, unscrew its fastenings and pull down the engine boot. Next, insert a long screwdriver into the hole next to the radiator and try to open the lock with it. If it is mounted next to the windshield, try using a loop bent from wire to hook the lock mechanism at the place where the cable is attached and pull it.

VAZ 2107 models

In the case when the engine compartment does not open on a VAZ 2022 car, this circumstance should not be a reason for panic. The fact is that the hood itself, the air intake cover and the place where the cable exits into the cabin are placed in an accessible manner. This circumstance allows you to open the hood of the VAZ 2107 yourself using one of the methods described above.

Difficulties can only arise if, for example, the air intakes here are equipped with decorative trims. In this case, you will have to first remove them and then try to open the hood. It is worth noting that due to the design features of the hinges, the hood of the VAZ 2107, even in good condition, opens poorly and therefore it is worth first making physical efforts, and then starting to open it.

VAZ 2109 models

It will be more difficult to open the hood of the VAZ 21099, since to do this you will have to crawl under the car. In addition, you will need to remove the crankcase protection, as well as the tin boot of the engine. This is done so that you can stick your hand to the radiator. After this, we feel for the torn cable and the ring to which it is attached. We press the lock and ask the assistant, who is on top, to press the hood from above, as well as in the direction of the driver’s seat. You can also hook the lock with a wire hook, but not everyone can do this.

VAZ 2110 models

In order to open the hood of a VAZ 2110 when the cable breaks, it is enough to use one of the methods already described for opening it. At the same time, there are some subtleties of opening it with your own hands. For example, some configurations of this model provide for the installation of an electric lock on the hood.

As a result, the car's battery may simply run out and the hood cannot be opened. To cope with this situation, it will be necessary to disassemble the light located above the passenger or driver’s seat, and also connect the “plus” and “minus” terminals from the battery of another car to its terminals. Next, you will need to start the car, and if there are no other faults, the lock will open.

Experienced car owners, in order to prevent such situations from occurring, perform hidden wiring to the battery. In this case, it will be enough to simply connect a charger to it and charge the dead VAZ 2110 battery.

VAZ 2114 models

Opening the hood of a VAZ 2114 is carried out in the same way as a similar operation on a VAZ 2109. Moreover, taking into account that the VAZ 2115 is equipped with equipment in the engine compartment similar to the equipment of the “fourteenth” model, having studied this procedure once, it will be possible, in that case, when the cable breaks, open the hood independently on three models of cars produced by VAZ.

Learning to open the hood

First, let's look at what to do if the handle responsible for this operation dangles freely without encountering resistance, which means the cord has fallen out of place or has broken.

If the break occurs inside the car, you are in luck - just find the end of the cord, grab it with pliers and pull it towards you. After the hood opens, remove the end of the cord from the lock spring. Now you will need to remove the loop at the handle, loosen the fasteners that are located in the engine compartment, and remove the broken cable out.

If the break occurs in the engine compartment, you will have to work hard. The opening procedure in this case is as follows:

Place the car over the inspection hole and go down;
Remove the engine protection mounts - these are several self-tapping screws that can be unscrewed using a size 8 wrench;
Remove the engine protection - it blocks access to the engine compartment;

Make sure the engine is cool and stick your hand into the space between the engine and the radiator;
Find the lock spring by touch and move it towards the battery;
Now you can open the hood and release the cord from the lock.

After you have solved the first problem, proceed to the second - replacing the cable, this is also not difficult.

And the radiator grille is inexpensive - you won’t have to spend a lot of money buying a new one. Of course, this option is useful as a last resort, if it is not possible to resolve the issue using a more competent method.

Learning to change the cable

Replacing the hood cable for VAZ 2114 and VAZ 2115 look identical. This is a simple procedure that is followed in the following order:

Buy a new cord. There are single-core and multi-core cables on sale - the latter option is preferable, since several turns are much more reliable. With this option, you will be insured for a long time against new hassles with opening and replacing the cable.
Tie a thin but strong string to the end of the broken cable in the engine compartment.
In the cabin, remove the hood release handle and pull the end of the old cable towards you - the cord will be pulled into the cabin.
Replace the O-ring.