Selecting engine oil does not require complex theoretical knowledge. It is enough to know the minimum set of parameters specified in the car user manual. You also need to know how much oil to fill, as well as the best types and manufacturers of consumables. Even an inexperienced car enthusiast is unlikely to make a mistake in choosing the right oil if he carefully studies the instructions. In this article, using the example of the popular Lada Granta car, we will look at what you should first pay attention to when choosing engine oil.
Replacement frequency
Recommendations for replacing technical fluid include a maintenance schedule, which differs for new and old cars.
Experienced car enthusiasts make replacements within the time period established by the manufacturer in order to avoid serious problems with the engine. It is recommended to carry out car maintenance every 10-15 thousand km or annually. During this time, the substance will have the required properties to lubricate the components of the power unit. After this period, it will lose its viscosity and change color, which will indicate the need to fill in a new substance. When finding out when to change the engine oil in a car, drivers need to take into account that the replacement interval is significantly affected by the technical condition of the engine and the car as a whole. If there are worn components, the procedure may be required earlier. After reading the articles, changing the oil will become less difficult, but drivers should also familiarize themselves with the technical documentation supplied with the car. An increase in lubricant consumption, a change in color, the presence of third-party impurities, leakage and a decrease in viscosity indicate the need to change the oil on Grant.
If you have a new car, the first Lada Granta oil change is carried out after 3,000 km. Then it is carried out every 10-15 thousand kilometers or once a year. It is worth considering that the period will also depend on the intensity of use. Some car enthusiasts often use their car, so they have to carry out maintenance several times a year. After replacing a new car within the prescribed period, its owners do not have to worry about the condition of the mechanisms. They may not contact specialists and perform the procedure themselves. However, they need to learn what is needed for replacement and how to carry it out correctly to avoid mistakes.
Step-by-step guide for changing engine oil
- Provide access to the drain hole. This may require removing the crankcase protection.
- The engine filler cap is removed.
- The drain plug in the pan becomes loose.
- A container is placed under the drain hole into which the used lubricant will be drained.
- Unscrew the cap by hand, and at the final stage, sharply move the hand with the unscrewed cap to the side.
- Wait 10–15 minutes until the waste liquid drains to the maximum.
- Move the container to the place where the oil filter is located. They unscrew it. Sometimes this is done using a special key. In such cases, it is recommended to first disconnect the crankshaft sensor block. This reduces the risk of the puller damaging a fragile part.
- Screw the drain plug back in. Old oil stains are wiped off, and the waste container is removed.
- If the type of oil being filled changes, you will have to flush the engine using special fluids.
- A new filter is being prepared for installation. Fresh lubricant is poured into its body (about halfway). The rubber O-ring is lubricated with new oil. The filter element is tightened by hand without excessive force.
- New lubricant is poured through the neck. Oil should be poured slowly to avoid leaks and overflow.
- Check the oil level. The fluid on the dipstick should stop midway between the “min” marks. and "max."
- The filler cap closes and the engine starts.
- The engine is allowed to run for a while to record the oil indicator readings.
- The engine is switched off, after a few minutes the oil level is checked again. If necessary, add a certain amount of new lubricant.
During the oil change process, they try to ensure that the liquid does not get on the ground. Drilling can be used for a variety of technical needs. Under no circumstances should you simply pour old lubricant onto the ground.
Volume of oil to be filled: how much oil to pour into the Lada Granta?
On a Lada Granta, changing the engine oil requires compliance with important requirements. One of them is that the volume of oil in the engine must be maintained at the required level. For this purpose, there are special marks on the container with liquid. An oil change for the Lada Granta is not required if it is between the MIN and MAX values, and is also in good technical condition.
Drivers should regularly check the oil level in the power plant, regardless of when they plan to fill it next. The fact is that the volume of liquid may decrease sharply due to the presence of certain malfunctions. If this is not detected promptly and the product is not replaced, it will lead to serious malfunctions. Drivers should also know that the procedure for replacing technical fluid on engines with 8 and 16 valves is practically the same. On engines of the second type, it is impossible to remove the oil filter in the upper part. To do this you will need to unscrew the pan. Otherwise the procedure is almost identical.
A car enthusiast can claim that he changed the oil on Grant, but it was not enough. In this case, it is worth considering that a certain volume of liquid must be poured into the engine. On a 16-valve engine, we change the oil in the same way as an 8-valve engine, if they are operated in combination with a manual transmission. In this case, you will need to fill in 3.2 liters of oil. If the power plants are operated in combination with an automatic transmission, you will need to fill in 4.4 liters of oil. The approximate volume of oil in the lubrication system in the first case is 3.5 liters, and in the second it is more than 4.5 liters, but about 0.5 liters remains in the container after draining.
Motorists should ensure that the oil level does not exceed the MAX mark. Otherwise, leaks will occur, which will negatively affect the condition of the engine and the machine as a whole.
Instructions for changing engine oil on a Grant with an 8 and 16 cl engine
So, unscrew the oil filler cap. Next, loosen the drain plug on the pan.
We place a container under it to drain the old oil and drain it until the oil begins to drip in small drops.
Next, we place the container under the oil filter and use pullers to unscrew it. For ease of replacement, we recommend disconnecting the crankshaft sensor block so as not to accidentally damage it with the puller.
If you don’t have a puller at hand, you can carefully pierce the oil filter with a screwdriver and unscrew it using the screwdriver as a lever.
After we have completely drained the old oil and unscrewed the filter, take a new filter and pour new oil into it up to about half of the filter, and also lubricate the rubber sealing ring with oil. We wrap the filter.
If you change the type of oil or fill in oil from another company, you must flush the engine with special flushing oil.
Pour new oil through the neck. With a manual transmission 3.2 liters with an automatic transmission 4.4 liters.
Let's wait a few seconds and start the engine. The oil level indicator lamp on the panel will light up. After a minute the lamp will go out. This completes the replacement process. You just need to check the level and top up if necessary.
Why is it necessary to change the oil in the Grant engine?
Changing the oil in the Lada Granta engine is a must. This is explained by the fact that the lubricant provides high-quality lubrication of all parts of the power plant, which prevents their friction. As a result, the surface of the components does not wear out over time, and they can last much longer. However, proper operation of the composition is possible only if the volume corresponds to the required one and the quality is at a high level.
The system should contain only high-quality substances that do not contain foreign impurities. They can harm parts, causing them mechanical damage. When changing the oil in a Grant engine, drivers should also take into account that a new filter element must be installed along with it. Otherwise, purifying the composition from foreign impurities will be impossible; on the contrary, negative substances may enter it.
It is also useful to constantly diagnose the condition of the car using a car scanner. For example, Rokodil ScanX is suitable for all models from 2011.
In addition to diagnostics, the scanner will help monitor oil pressure and level, all available sensors and other operational characteristics. It would not be superfluous to set the required mask replacement schedule, for example, every 10 thousand km.
Motorists should take into account that during normal engine operation, engine oil consumption of up to 1 liter per 1000 km is considered normal. It depends on the viscosity, quality and operating conditions of the vehicle. For example, a car will consume more of this substance at high speed. New cars also quickly consume engine oil, since the piston rings, pistons and cylinder walls of the power unit have not yet gotten used to it. If motorists notice that the consumption of the substance is rapidly increasing, they need to contact a car service for diagnostics and troubleshooting.
What kind of oil should I fill in?
Step-by-step instruction
We offer you fairly simple instructions on how to independently replace the technical fluid in the engine of this car.
- First, you will need to purchase a new filter and oil in the amount corresponding to the modification of the power unit of your car.
- The easiest way to perform this procedure is in a garage pit or on an overpass. With some skill, you can change the oil even on a flat surface. You will only need to use an appropriate flat container to drain the old technical fluid.
- We drive the car into a pit or overpass, and then open the oil filler cap located on the engine under the hood. This will relieve excess pressure.
- Only after this do we install an empty container under the engine crankcase and unscrew the drain plug. To do this, you will need a 17 key. Remember that the oil may be hot, so proceed with extreme caution.
- You need to wait until the old oil has completely drained from the engine crankcase. This usually takes about 10 minutes, after which the drain plug must be screwed back in. Many car owners lose sight of this point, which leads to the fact that the new, fresh oil that has just been poured into the engine begins to leak out of the engine.
- At the next stage of work, it is necessary to replace the filter. It is located behind the engine. The easiest way to remove it is with a special puller. If you have the dexterity, you can use your hands on a cold engine. Just remember that there is also a small amount of oil inside the filter, so it is best to place a small container and act carefully. If the filter threads are rusty and stuck, you can pierce the filter with a screwdriver and use it as a lever. This will allow you to replace the filter as quickly as possible. It is recommended to pour 10-20 grams of fresh oil into it, then screw it into place.
- When pouring fresh auto lubricant into the engine through the neck, do not forget to monitor its level through the oil dipstick. The technical fluid level should be located between the minimum and maximum marks.
- After this, you will need to tighten the filler cap and start the engine for a few minutes. After this, we turn off the engine and check it for leaks.
- The next day, do not forget to check the level with a dipstick on a cold engine. If necessary, you will need to add technical fluid to the engine.
At this point, all service work is completely completed. As you can see, changing the oil in a Lada Granta engine does not present any difficulty. You don't need to use any special tools.
All service work will take the car owner at most half an hour, while you can save money on carrying out such service at specialized service stations.
What kind of oil should be poured into the Lada Granta?
Many car enthusiasts are interested in what kind of oil to pour into the Lada Granta engine with an 8-valve and 16-valve engine. Of course, they can follow advice from experienced car owners by reading numerous reviews on the Internet. However, this information will not be enough. Moreover, she cannot always be trusted. It is safe to pay attention to the manufacturer's recommendations.
AvtoVAZ recommends using oil from the following manufacturers for Lada Granta: Mobil 1, ShellHelix, Lukoil, Rosneft and Tatneft. Car enthusiasts can also pay attention to other products that will meet the requirements for viscosity grade and other characteristics. It should be taken into account that the manufacturer recommends using products with SJ and SL parameters, API or ACEA class. Finding an oil that meets your requirements for Granta with 8 or 16 valves is easy thanks to the wide range of offers.
Motorists with an 8-valve Grant engine can select engine oil in accordance with the one it was filled with at the factory. The fact is that it is different for each series of cars. To find out this information you need to look under the hood and find a tag with the corresponding inscription. Reviews from car owners confirm that for the Lada Grant the manufacturer uses mineral or semi-synthetic oil, which is produced by Lukoil. For this reason, they can safely give preference to these products for the Lada Grant, additionally choosing the appropriate composition according to their characteristics.
Getting ready to change the lubricant
The procedure for replacing the lubricant on engines with 8 or 16 valves is completely the same in the main stages. The only difference is that the 8-valve engine provides easier access to the oil filter. On cars with a 16-valve power unit, the crankcase protection must be removed.
Before pouring lubricant into the engine, you need to prepare the car. The engine is warmed up to operating temperature. For an 8-valve power unit, it can be 80°C.
The machine is installed on a flat surface with convenient access to the crankcase. This could be an inspection hole, an overpass, or a lift. When starting the actual procedure for changing the lubricant, the position of the car is fixed using the hand brake. Next, Grant's oil is changed in a certain order.
Pros and cons of different formulations
The Lada Granta car manufacturer recommends using only semi-synthetic products. However, many drivers prefer synthetic lubricants, since their use makes it easier for the power unit to start in severe frost. Drivers need to find out which oil to pour into a Granta with 16 valves or 8 valves in the engine. First of all, you need to familiarize yourself with the advantages of synthetic oil:
- the products are highly resistant to negative influences, including changes in air temperature;
- at high negative temperatures, synthetic products have better fluidity compared to semi-synthetics;
- the product contains much fewer additives, since most of them are synthesized at the time of manufacture;
- The oil is completely synthetic, therefore it has the best anti-friction characteristics;
- Thanks to the undeniable quality and better lubrication characteristics, the friction of engine parts is reduced, and accordingly, its service life is increased and the intervals between repairs are reduced.
General issues
Let's consider general philistine questions about Granta and butter.
How to check the oil level in Grant
We check the level classically;
- The car must be turned off for at least 5-10 minutes;
- We take out the oil dipstick, wipe it with a rag and put it back;
- We take it out and look at the light - the level should be between MIN and MAX.
The dipsticks on the Lada suffer from the fact that they are difficult to read. You may need to wipe and lower the dipstick again.
When to change the oil of a VAZ 2190
According to the regulations, replacement on the Grant is required every 15,000 kilometers. Practical experience suggests replacement every 10,000 km. mileage, or once/twice a year.
The Grants are stuffed with Rosneft from the factory. The brand has not proven itself to be reliable and of high quality.
The first replacement occurs after the new car has been broken in - after 2000 km. This is not a requirement from the factory, but common sense - change the flooded s to something normal.
Which oil to choose
Next is a table with factory recommendations for Grants.
Excerpt from the documentation for the VAZ 2190.
Semi-synthetic, mineral water or synthetic
Many car owners have their own point of view about which oil is more appropriate for the Lada Granta. Semi-synthetics and mineral options do not quite suit them. Pure synthetics have clear advantages over the alternative.
- Synthetic oils have higher temperature stability.
- At subzero temperatures they retain better fluidity. Accordingly, in cold weather the engine starts faster.
- Synthetics have higher anti-friction properties.
- The lubricating properties of such oils are more powerful, due to which the engine life is increased and fuel consumption is reduced.
However, the cost of synthetic lubricants is noticeably higher than semi-synthetic ones. And you have to decide which oil to pour into the Lada Granta engine individually, based on your personal financial capabilities.
Main manufacturers and cost of oil filter
Manufacturer | Price, rub.) |
Factory articles | |
LADA 210801012005 | from 350 |
2105-1012005 | —/— |
2105010120050160 | —/— |
2105-1012005-01 | —/— |
21080101200509 | —/— |
2108-1012-005-07 | —/— |
Other brands | |
LYNXauto LC-1030 | from 275 |
CHAMPION COF100030S | —/— |
PURFLUX LS285 | —/— |
BOSCH 0 451 103 274 | —/— |
FILTRON OP520/1 | —/— |
MEAT & DORIA 15193/9 | —/— |
CLEAN FILTERS DO 886 | —/— |
MANN-FILTER W 914/2 (10) | —/— |
Related link:
How to lower the Lada Granta? Pros and cons of lowered suspension
*prices are as of September 27, 2018.
TOP 5 best oils for Lada Granta
This is my personal choice based on experience and analysis of information on the Internet. It is for informational purposes only and is not a call to purchase. The rating was not paid for by anyone, I do not cooperate with manufacturers, so there is no “ordering” here.
#1SHELL Helix HX8 Synthetic 5W-40 Best price Yandex Market #2Mobil Super 3000 X1 5W-40 Best price Yandex Market #3TOTAL Quartz 9000 5W-40 Best price Yandex Market #4LUKOIL Luxury semi-synthetic SL/CF 10W-40 Best price Yandex Market # 5Rosneft Maximum 5W-40 SG/CD Best price Yandex Market
SHELL Helix HX8 Synthetic 5W-40
4.9 Customer rating 9 reviews Read reviews Full review RUR 689
for 1l. 5W-40 SHELL Viscosity 5W-40APISN/CF, SN-PLUSACEAA3/B3, A3/B4 Pour point -50°C Dynamic viscosity CSS-Kinematic viscosity at 100°C14.60 mm2/s Laboratory analyzes IndicatorValue/Unit of measurement
Density at 15°C | – |
Kinematic viscosity at 100℃ | 14.6 mm²/s |
Kinematic viscosity at 40°C | 87.43 mm²/s |
Dynamic viscosity (CCS) at -30°C | – |
Dynamic viscosity (MRV) at -35°C | – |
Viscosity index | 175 |
Freezing point | -50°C |
Flash point | 235°C |
Sulfated ash content | 1.14% wt. |
API clearance | SN/SN PLUS/CF |
ACEA approval | A3/B3, A3/B4 |
Base number | 12.38 mg. KOH per 1 g |
Acid number | 1.63 mg. KOH per 1 g |
Sulfur content | 0.250 % |
Fourier IR Spectrum | – |
NOACK | – |
Tolerances Tolerances:
- MB-Approval 229.3
- VW Standard 502.00, 505.00
- Renault RN 0700, RN 0710
Matches:
- Fiat (FCA) 9.55535-M2
A little about the oil The oil received high marks according to test results - and for good reason. It perfectly washes the engine, adapts to any conditions of use, and retains its properties throughout the recommended mileage. Ideal for turbocharged engines, used diesel engines, operating in difficult conditions.
We can safely say that in this case the quality not only matches the price, but significantly exceeds it; according to the analysis results, the oil is more similar to the premium segment. Meets modern standards and can be poured into modern engines that meet the tolerances. It is optimal to use it for city traffic with a high load; in the “highway” mode it works well, but showed high consumption.
Advantages
- Latest API clearance.
- High engine protection when driving in urban conditions.
- Maintains fluidity down to at least -35 degrees.
- Rich additive package.
- Pure base foundation.
Flaws
- Relatively high consumption on the highway.
Mobil Super 3000 X1 5W-40
4.3 Customer rating 36 reviews Read reviews Full review RUR 524
for 1l. 5W-40 Viscosity 5W-40APISN/SMACEAA3/B3, A3/B4 Pour point -44°C Dynamic viscosity CSS6048 mPas at -30℃Kinematic viscosity at 100°C13.76 mm²/s Laboratory tests IndicatorValue/Unit of measurement
Kinematic viscosity at 100℃ | 13.76 mm²/s |
Kinematic viscosity at 40°C | 83.51 mm²/s |
Sulfated ash content | 1.14% |
Phosphorus content | 987 mg/kg |
Density at 15°C | 0.855 kg/l |
Flash point | 232°C |
Freezing point | -44°C |
API clearance | SN/SM |
ACEA approval | A3/B3, A3/B4 |
Dynamic viscosity (CCS) at -30°C | 6048 |
Dynamic viscosity (MRV) at -35°C | – |
Base number | 10.01 mg. KOH for 1g. |
Acid number | 2.32 mg. KOH for 1g. |
Fourier IR Spectrum | – |
NOACK | 10.9% |
Approvals Mobil Super 3000 X1 exceeds or meets the following requirements:
- ACEA A3/B3, A3/B4;
- API SN/SM;
- AAE (STO 003) Group B6.
Has the following equipment manufacturer approvals for use:
- MB-Approval 229.3;
- VW 502 00/505 00;
- BMW Longlife-01;
- Porsche A40;
- Peugeot/Citroën Automobiles B71 2296;
- Renault RN0710 / RN0700;
- AVTOVAZ (Lada cars).
ExxonMobil recommends using this oil where:
- API CF;
- Opel GM-LL-B-025.
A little about the oil The oil is perfect for both urban use and high-speed highway travel. I would not recommend this product to owners of older cars due to the overly aggressive cleaning of deposits, which can lead to engine failure. Advantages
- Universal oil, suitable for all types of modern internal combustion engines.
- Low waste consumption.
- Good cleaning properties.
- Thick film, reliable engine protection even under heavy loads.
- Pure base foundation.
- Stability under load.
Flaws
- Owners of old cars note the excessive cleaning properties of the composition, which do not always have a positive effect on the condition of the unit - the oil is designed for more modern models.
- Cold start not lower than -25 degrees.
TOTAL Quartz 9000 5W-40
4.2 Customer rating 6 reviews Read reviews Full review RUB 640.
for 1l. 5W-40 Viscosity 5W-40APISM/CFACEAA3/B4 Pour point -44°C Dynamic viscosity CSS5809 mPa*s at -30℃ Kinematic viscosity at 100°C14.79 mm²/s Laboratory analyzes IndicatorValue/Unit of measurement
Viscosity grade | 5W-40 |
Density at 15°C | 854.3 kg/m³ |
Kinematic viscosity at 40°C | 90.70 mm²/s |
Kinematic viscosity at 100℃ | 14.79 mm²/s |
Viscosity index | 171 |
Flash point | 238°C |
Freezing point | -44°C |
API clearance | SM/CF |
ACEA approval | A3/B4 |
Dynamic viscosity (CCS) at -30°C | 5809 mPas |
Base number | 9.91 mg. KOH for 1 g. |
Acid number | 2.38 mg. KOH for 1 g. |
Sulfated ash content | 1.12% |
Sulfur content | 0.243% |
Fourier IR Spectrum | – |
NOACK | 10.3% |
Tolerances
- PSA B71 2296;
- VW 502.00/505.00;
- BMW LL-01;
- MB 229.3;
- PORSCHE A40.
A little about TOTAL QUARTZ 9000 5W40 oil - a modern oil made on the basis of the best developments and technologies. Suitable for any car engine, incl. HBO and internal combustion engine components are cleaned, increasing service life. The cost of synthetics is one of the highest in comparison with competitors, there are many fakes, but the company itself is a leader in the fuel and lubricants market, received a maximum rating of 98 out of 100 according to reviews on the website partreview.ru. Advantages
- Suitable for highly accelerated and loaded engines, internal combustion engines with turbines and hybrid installations.
- Adapted for difficult conditions - high-speed driving, overheating.
- Pure base foundation.
- Creates a durable oil film.
Flaws
- After 5-7 thousand kilometers, oil consumption is possible. Although very minor.
- A large number of fakes are on sale.
- When the temperature is -30 or more, problems with starting diesel engines are possible. In this case, it is better to buy a 0W zero.
LUKOIL Lux semi-synthetic SL/CF 10W-40
4.6 Customer rating 5 reviews Read reviews Full review RUR 350
for 1l. 10w-40 Lukoil Viscosity 10w-40APISL/CFACEA-Pour point-38°C Dynamic viscosity CSS-Kinematic viscosity at 100°C14.22 mm²/s Laboratory tests IndicatorValue/Unit of measurement
Kinematic viscosity at 40°C | 93.60 mm²/s |
Kinematic viscosity at 100℃ | 14.22 mm²/s |
Dynamic viscosity (CCS) at -25°C | – |
Dynamic viscosity (MRV) at -30°C | – |
Density at 15°C | – |
Viscosity index | 157 |
Freezing point | -38°C |
Flash point | 222°C |
Sulfated ash content | 1.03% |
API clearance | SL/CF |
ACEA approval | – |
Base number | 8.04 mg KOH per 1 g |
Acid number | 1.69 mg KOH per 1 g |
Sulfur content | 0.561% |
Fourier IR Spectrum | Based on VHVI hydrocracking + mineral water |
NOACK | – |
Tolerances
- API SL/CF
- OJSC "UMZ"
- JSC "AVTOVAZ"
A little about the oil High-quality and inexpensive domestic semi-synthetic with the characteristics of synthetic oil. The composition includes organic molybdenum, can easily withstand heavy loads and is excellent for used engines of domestic and foreign production.
The best motor oils for Lada Granta
Lada Granta can be filled with both the original product, produced under the plant’s brand, and mixtures of any other manufacturers with similar characteristics.
Lada
The composition with this marking is produced. It has a viscosity rating of 5W-40. Depending on the chosen line (ProfessionaL or Ultra), the buyer will receive a semi-synthetic or synthetic mixture.
"Lukoil"
Experienced drivers of domestic cars prefer the Lux series.
Its main characteristics:
- the presence of additives with enhanced cleaning properties;
- the ability to create a dense coating even with frequent vehicle stops.
Castrol
The Magnatec series is positioned as a product created taking into account the harsh Russian winters. It is capable of facilitating engine starting, even if the outside temperature is below -35 °C. The main disadvantage noted by car enthusiasts is the high probability of encountering a fake. Such a product will burn out quickly and may shorten the life of the motor.
Luxe
Owners of Lada cars use semi-synthetic oils of the Luxe brand from the Gold line. It contains additives that can maximally compensate for the wear of metal parts of the engine and minimize friction. The product belongs to the budget segment. Despite this, it performs well in the burn and evaporation tests.
"Novoil"
The budget product Novoil-Super from Bashneft has been officially approved. The line includes mineral and semi-synthetic mixtures. The lubricant has a low API quality class. It corresponds to the SD category, but can be used on older cars. Experienced drivers do not recommend this composition for new cars.
Sibimotor
The product contains additives from foreign manufacturers. Thanks to them, the anti-wear properties of the mixture are achieved primarily. The “Extra” series has a quality class of SL/CF and is suitable for any Lada cars.
Shell
All Shell Helix synthetic oil options are highly rated by users.
Their main qualities:
- low consumption;
- enhanced engine protection;
- effective prevention of sludge formation;
- the ability to destroy old deposits.
G-Energy
The G-Energy brand belongs to . The products are manufactured using Italian equipment. The main advantage is considered to be protection against counterfeiting. You can buy this mixture at Gazneft branded gas stations. The main quality is the cleaning properties of additives that can compensate for the effects of low-quality gasoline.
Mobile
Synthetic oils produced under the Mobil 1 brand ensure efficient engine operation and protect it under all operating conditions. The manufacturer offers several lines that differ in the tasks they solve.
Most of them have enhanced cleaning properties and help save fuel.
Motor lubricants from Mobil are one of the most popular synthetic products on the world market. This explains the high frequency of counterfeits.
TNK
Among owners of domestic cars from the TNK product line, the Magnum Motor Plus composition is most in demand. This is a semi-synthetic oil intended for used cars. The main property of the brand is the manufacturer’s own viscosity modifier included in the composition. It provides improved high temperature grease stability.
Zic
For Lada cars, ZIC X9 with a viscosity index of 5W-40 is considered the best option. These mixtures contain a rich composition of additives. It contains the most popular components: boron, calcium, zinc. Due to this, the product minimizes the formation of deposits, even if low-quality fuel is used.
Opinion of Grantovodov
What do the owners of this car think?
Views were divided. Some still do not trust the Russian manufacturer, others, on the contrary, are inclined to believe that there is no need to overpay for a foreign brand. Even the owners of 16-valve engines have divided ideas about the choice of oil
Let us only note that we have never seen Novoil Super oil from BashNeft or TatNeft Synthetic from TatNeft on sale, although we asked at their gas stations in our town.
problems with purchasing other Russian oils ; they are presented in most auto stores and are in demand due to their low cost.
List of motor oils with reviews
Learn more about the oil
in an 8-valve
engine
, read here. This is an easy procedure that even inexperienced car owners can do.
What volume of oil needs to be filled
When changing engine oil on a Lada Granta, you need to pour in 3.5 liters of the mixture, completely getting rid of the old lubricant. If less liquid is placed in the container, this indicates that the same composition remains in it. This is harmful to the engine, especially if the new product is different in composition.
Additionally, it is recommended to flush the engine before replacing, especially if we are talking about updating oil that has been run in from the factory.
How often, how much and what kind of oil to pour into a Priora 16 valve. Advice from experts on choosing the best engine oil for Lada Priora and debunking popular myths among motorists.
Reference information for undergoing maintenance of Lada Granta/Kalina (articles and refueling volumes)
AvtoVAZ recommends that Lada Granta or Lada Kalina 2 undergo maintenance every 12 months or 15,000 km, whichever comes first. If you order some spare parts and consumables (oil, filters, etc.) yourself, then you will need article numbers for original consumables and analogues for each specific service.
API class SL, SM or SN.
Original LADA engine oil
:
- 88888L05400100 – ULTRA 5W-40, 1 l (synthetic technologies)
- 88888L05400400 – ULTRA 5W-40, 4 l (synthetic technologies)
- 88888L15400100 – PROFESSIONAL 5W-40, 1 l (semi-synthetic)
- 88888L15400400 – PROFESSIONAL 5W-40, 4l (semi-synthetic)
Factory recommendations: ROSNEFT Premium or ROSNEFT Maximum 5W-40 or 10W-40. Or Lukoil Genesis RN 5W-40
Engine lubrication system:
- with manual transmission – 3.2 l
- With automatic transmission – 4.4 l
LADA 21080-1012005-00, 21080-1012005-08 or 21080-1012005-09
- Lada Ultra GL-4/5 75W90 synth. - 88888L75900100 and 88888L75900400
- Lukoil TM-4 75W90 GL-4 p/synth. — 19531 and 19532
- ZIC GFT 75W90 synth. - 132629 and 162629
- Rosneft Kinetic 75W90 GL-4/G p/synth. — 5106 and 5107
- Genuine EJ-1 ATF for automatic transmission
- Manual transmission 2180 – 3.1 l
- Manual transmission 2181 – 2.2 l
- Automatic transmission (Jatco) – 4.1-4.4 l
- AMT 2182 – 2.25
Eat
- LADA G-11 – 88888400001082 and 88888400005082
- LADA G-12 – 88888200001082 and 88888100005082 (red)
- Antifreeze G-48;
- Cool Steam Standard;
- Cool Steam Premium;
- TS-Felix;
- Felix Carbox;
- SINTEC (for example, "Antifreeze
- SINTEC" TU 2422-047-
- 51140047-2007);
- Long Life;
- G-Energy Antefreexe.
LADA DOT-4 – 88888100000582 and 88888100001082
LADA 11180-8122010 or 8450002895/11180-8122010-08 (for Lada Granta FL)
- A17DVRM JSC "Robert Bosch Saratov"
- LR15YC-1 BRISK
- WR7DCX Bosch
- AU17DVRM JSC "Robert Bosch Saratov"
- DR15YC-1 BRISK
- FR7DCU Bosch
- Belt LADA 21080-1006040-10, 21080-1006040-11
- Belt tensioner roller LADA 21080-1006120-00, 21080-1006120-01
- LADA 21126-1006040-00
(Gates – K015631XS) - Belt tensioner roller LADA 21126100623800
(Coram – C835, Pilenga PT-P 1550, Torque – KR-5015, INA – 531084110) - Support roller (bypass) LADA 21126100613500
(Torque – KR-5016, INA – 532060410, SNR – GE37200, Pilenga – PT-P 1571 (with eccentric))
Kit for 16kl engine:
- Gates – K015631XS
- Contitech – CT1137K1
- DAYCO – KTB700
- INA – 530053610
LADA 21100-3501080, 21100-3501089
LADA 2110-3501070 (13 inches) and 2112-3501070 (14 inches)
Drum: LADA 21080-3502090-01
Disc: LADA 11196350208900
Name | Catalog number or name | Quantity or volumes | Replacement instructions |
Engine oil | Oil filter | ||
Transmission oil | |||
Coolant | Eat | ||
Fuel filter | Eat | ||
Hydraulic brake system | Eat | ||
Ozone-safe freon in the air conditioning system | |||
Cabin filter | 1 | Eat | |
Engine air filter | LADA 21120-1109080-02, 21120-1109080-03, 21120-1109080-04, 21120-1109080-06 | 1 | Eat |
Spark plug | 4 | ||
Generator belt | 1 | Eat | |
Timing belt, tension and guide rollers | 1 kit | ||
Front brake pads | 1 kit | Eat | |
Front brake discs | 1 kit | Eat | |
Rear brake pads | 1 kit | Eat | |
Rear brake discs | 1 kit |
ps the table will be updated as new data becomes available. Anything to add/change? Write in the comments!
Let us remind you that we published the maintenance schedule (maintenance schedule) earlier. You will find other spare parts numbers in the complete parts catalog (for Lada Kalina and Lada Granta).
Found an error? Select it and press Ctrl+Enter..
Lada news. what kind of oil should I put in the engine? interval. additives.
Already today, the amount of use depends on the viscosity parameter of the oil, its properties and the criteria where it is used. As an example, it is possible to cite the fact that when driving in a brutal style at high speeds, oil will be consumed much more than just that. There will be a slightly increased consumption if the passage is with a new engine, since its pistons, rings and walls have not yet fully gotten used to it. However, this phenomenon will actually disappear after the first oil change at around three thousand km.
An important factor when choosing is to consider at first what low temperatures the car will be operated at.
Dependence of oil type on environmental temperature
For example, if we are talking about the most severe conditions, including 30 degrees below zero, then the oil should be obtained with the 0W index. The next step, which refers to 5W oil, will be a temperature limit of 25 degrees Celsius. With an increase in low temperature to 15 degrees, it is possible to fill in oil with the index 10W.
If you use a type of oil that is not suitable for operating conditions, the engine will run intermittently or “catch a wedge.”
Additionally, it is necessary to take into account such reasons as the state of the complex of accounting programs for injection, battery, ignition and cylinder compression. As a rule, these characteristics will not be relevant for a new car.
Oil change intervals
The car manufacturer indicated in the operating manual the frequency of 15 thousand km. But it is recommended to halve this interval if the car is used only in the city. Driving in stop-start mode due to traffic lights and traffic jams has a much worse effect on the engine than driving evenly along the highway. It also accelerates the depletion of oil and the loss of its properties. Even ester synthetic compounds are not an exception. They need to be updated at the same frequency to keep the engine protected.
Choosing engine oil wisely
When choosing an oil, the most important thing is not to make a mistake and select it strictly according to the manufacturer’s specifications. The picture below shows the factory advice (excerpt from the service book).
Engine oil table (1st sheet)
Engine oil table
(2nd sheet)
The first thing that is noticeable is the absence of Castrol, ZIC and other famous manufacturers.
Why? They didn't pay for advertising? By the way, for a 16-valve engine, which is not discussed in this article, these oils
There is.
Read:
By the way, many car enthusiasts try to fill in the oil that was filled in from the factory.