Which is better to install a generator on a VAZ 21214 injector


Every motorist knows that a generator is a fairly important element in the design of any car, thanks to which it is possible to set the engine in motion and provide all vehicle systems with the necessary energy.

The Russian-made Niva car in modifications 21214, 2121, 21213 are vehicles that almost every second car enthusiast in Russia has encountered.

Despite the release of several models, the contents of the Niva are practically no different. Thus, manufacturers used units with article numbers 9412.3701, 371.3701 as a generator in cars.

Types of generator on Niva

The difference between Niva generators lies in the years of production of the car. Niva carburetor engines had their own generator, and injection engines had their own. It should be noted that both generators are driven by a V-belt.

Generator Niva 21213

The VAZ 21213 is equipped with its own type of generator, since this model is carburetor, the generator in it is slightly different from the injection one. The carburetor field generator has catalog number 371.3701.

Below is the design of the carburetor Niva generator (2121).

Generator Niva 21214

Niva 21214 is fuel-injected and is equipped with a more modern type of generator and has catalog number 9412.3701.

Below is the design of the injection Niva generator (21214).

Generator 21214

Reg.: 03.03.2019 Threads / Messages: 1 / 1525 From: Tyumen Age: 52 Car: VAZ 212140 2010 Guards

Reg.: 07/06/2020 Threads / Messages: 1 / 360 From: Moscow Age: 42 Cars: Workers: Porsche Cayenne 3.0d 2014, Lexus LX450d 2016 Personal: Niva 2121 1992 body 2006

Name: Vadim Reg.: 12/07/2017 Threads / Messages: 1 / 211 From: Novgorod region. Age: 47 Car: VAZ 21214. 2007.

This is your load, it turns out to be 30a. Well, yes, for a standard one it’s more or less normal.

In half an hour I screwed in 3 power wires and that was it.

Reg.: 05/27/2013 Messages: 202 From: St. Petersburg, Russia Age: 41 Car: VAZ 21214 2003 VAZ 21214 2012

Reg.: 02.20.2017 Messages: 1650 From: Belarus Pinsk Age: 57 Car: VAZ-212180 mono 2000

Reg.: 02/14/2016 Messages: 180 From: Moscow Age: 48 Car: 21214-m 2014

Rikki, in my opinion, it’s much easier to find a ferrule for crimping, and press pliers.

Reg.: 02/14/2016 Messages: 180 From: Moscow Age: 48 Car: 21214-m 2014

and it will be much more compact than any, even very expensive, tip sleeves.

but, I don’t know how to solder without normal power supply

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]