Popular question: How to find out the Body Color Number on a Chevrolet Niva?

Chevrolet body color codes (table)

Also interesting: UAZ Ptriot and Chevrolet Niva - comparison of car characteristics

Select chevrolet model

Our company provides professional paint selection and tinting services. If you need a paint selection for Chevrolet cars, please contact our colorist by phone. and to our auto chemical goods store. A wide range of products are on sale - auto chemicals, auto cosmetics, materials for body repair. Ready-made auto enamels in a wide range of colors, varnishes, putties, primers, spray guns and much more.

{amp}gt;{amp}gt;{amp}gt; BACK TO VEHICLES LIST

General provisions

Some objects posted on the site are intellectual property. The use of such objects is established by the current legislation of the Russian Federation.

The website “Shop of consumables and paint materials for body repair” contains links that allow you to go to other sites. is not responsible for the information published on these sites and provides links to them only for the purpose of providing convenience to visitors to its site.

Where is the code for chevrolet paint?

The PROMIKS computer enamel selection laboratory offers aerosol cans and a tinting pencil (paint with a brush) for the paint code for any car. Our main specialization. enamel. We carry out computer selection of enamel using modern PPG Deltron equipment.

All painting and body work is done using the latest technology and the best technology in the world of precision and local auto repair. If you are faced with the problem of chips and scratches on the body of your car, if you need restoration work and painting done quickly and accurately. we will do this in a few hours.

How to determine damage using a thickness gauge?

It will not be difficult to conduct research on any brand of car using such a tool. You will need the original paint thickness on the car, which can be found in the table. Write down or remember this value. Then use the device to determine the paintwork indicators on all parts of the car. This procedure is carried out in a few minutes and does not require any special skills. But it is important to do everything accurately and without doubt.

The only caveat worth remembering here is the quality of the device. Sometimes the data from the table will not agree completely because the thickness gauge can be a little deceiving. If the deviation is within 10-15%, you can ignore such moments. But exceeding the permissible values ​​by several times is a guarantee of poor-quality body repairs to the car. Most often, paintwork in such places can be visually distinguished from factory coatings.

Personal information and security

Our company guarantees that no information received from you will ever, under any circumstances, be provided to third parties, except in cases provided for by the current legislation of the Russian Federation.

In certain circumstances, we may ask you to register and provide personal information. The information provided is used solely for official purposes, as well as to provide access to special information.

Personal information can be changed, updated or deleted at any time in the Account section {amp}gt; "Profile".

In order to provide you with certain types of information, with your explicit consent, we may send informational messages to the email address specified during registration. At any time you can change the subject of such mailings or refuse it.

Like many other websites, Body Repair Supplies & Paint Store uses cookie technology, which may be used to promote our product and measure the effectiveness of advertising. In addition, with the help of this technology, the “Shop of consumables and paint and varnish materials for body repair” is set up to work personally with you. In particular, without this technology it is impossible to work with authorization in the control panel.

The information on this website is for informational purposes only and is subject to any changes without any prior notice.

To opt out of further communications with our company, change or delete your personal information, write to us via the feedback form

How to find out a car's paint code

Each car has a color code. In order to understand what kind of paint. Partial and full car painting. Budget painting. Protective and abrasive polishing of car body.

We have extensive experience in local auto body repairs, partial and full vehicle refinishing. We can remove dents, scratches, scratches and chips on the body with quality and in a very short time. Our Center takes on the most difficult and complex cases, and you can be sure that partial repairs and local body painting, as well as spot chip and scratch repairs will be done to the highest standard.

We use all types of painting machines only using modern equipment and materials, which allows us to reduce the cost of repairs and repairs, as well as hide traces of work on the body from professionals. In addition, with us you can do bumper repairs and plastic repairs, as well as advertising on cars. We will fix any damage to your vehicle as if it never happened.

Painting of cars in Moscow, spot repairs. Low prices, high quality! Information about telephones 8-926-610-73-55, (495) 741-58-79

OFFER. "COLOR SELECTION".

We offer the service: Pour paint into 500 cm3 aerosol cans. See the cost of a 300 ml can of prepared paint according to the code. 580 rubles. Make a brush stroke with a 20 ml brush. 280 rubles. Make a pencil with the Chevrolet color code in red. marker for chip repair and scratch removal, 12 ml. 300 rubles.

Chevrolet paint code

Painting. — Chevrolet Niva, 1.7 l., 2008 on DRIVE2

Well, I had a free day and decided to paint something. To begin with, I opened the putty on the rear left fender; the crack bothered me. It turned out that no one knows what a spoter is, they just threw on a heap of putty and that’s it... I took off all the old putty, straightened the wing as best as possible and put it on “new”.

Full size

While the putty was sinking, I decided to paint the thresholds. I sanded everything that was needed, filled it with acid, then sealed the seams with sealant. There were thoughts on how to fill the seams of parts working in conditions of constant dampness, sandblasting and chemical reagents from the road. Actually there are only 2 options, either tinning or polyurethane. I chose a less labor-intensive method. There was no question of covering everything with hygroscopic putty! One unnoticeable chip, a scratch on the coating and that’s it, the chemicals from the road began to be absorbed! Well, the plus to this method is that the polyurethane is located exactly in the place where the rubber on the door rubs in. Shniv owners can observe constant paint rubbing in this area.

Full size

Full size

Well, after that a layer of epoxy primer, anti-gravel, then primer for plastic, base and varnish. It turned out like this)

Full size

Full size

Full size

Full size

Just right for the field. I hope these thresholds will last longer than the factory ones. The putty is almost ready, you can create a semblance of a wing. The right wing, as you remember, is also in spiders and the same rusty sandblasted arch, so I decided to paint both rear wings entirely + the 5th door opening.

Full size

Full size

I removed everything, primed it, and also where necessary with acid and epoxy. On top of this there is anti-gravel on the arches and on the rear panel.

Full size

Full size

I sanded the smooth transition of the anti-gravel to the ground. I didn’t make straight lines... I don’t like it lately. I painted everything)

Full size

Full size

Full size

Full size

It's a little overdone, everything is too shiny, it would be a shame to rub against the branches)) I barely figured out the color. For some reason I thought it was TRIUMPH, but it turned out to be RASPBERRY, i.e. This is the paint that is used on TAGAZ Huynday) How it ended up on Sheviniv is unclear. And it didn’t really fit... I gave it to me for coloring, and taking into account the burnout, they turned out great! In tone.

Full size

And into the grain.

Full size

I immediately decided to make the bottom inside. A thin layer of factory primer is only suitable for painting shovels to give them a marketable appearance. Everything was rotten, moisture got under the vibration sheets... the bottom began to rust. At this rate it would have rotted in a couple of years...

Full size

The vibroplast was partially torn off. Cleaned, primed with acid and red primer, ready for painting. The car will probably float more than once, there will be wet carpets, it needs to be kept from rusting. Apparently there is no factory coating.

Full size

After

Calibration

Before starting measurements, the thickness gauge must be calibrated. For this purpose, special calibration plates are used, which are included in the kit. But the calibration gets lost due to temperature changes, dampness or a dead “battery”. Therefore, always check the calibration of the device before taking measurements. If you rent a thickness gauge, ask that it be calibrated in front of you, and also be given calibration plates for subsequent self-adjustment. Just in case, check how to do this.

Also interesting: Lada 4×4 and Chevrolet Niva: how are they similar and how are they different?

Do not use a thickness gauge on a dirty car.

Do not use the thickness gauge on a dirty machine. Firstly, the device readings may be incorrect. Secondly, using a thickness gauge on a dirty body can damage both the device itself and the paintwork.

1. Don't use no-name or cheap thickness gauges.

2. Check in advance the acceptable paint thickness for a specific model. For attached parts this is usually 100–200 microns, for the body frame - 40–60 microns.

3. Select a device based on the inspection conditions: winter - you need a frost-resistant thickness gauge, the machine has aluminum parts - a device that works with non-ferrous metals.

4. Operate a calibrated instrument on a clean machine.

5. Measure the element at at least five different points perpendicular to the body.

6. Measure not only the hinged panels, but also the internal parts of the body.

Discontinued colors:

Liked? Tell your friends!

When operating a Chevrolet Niva car, any owner, sooner or later, is bound to encounter the problem of needing some paint somewhere. Either there are chips on the hood, or some kind of scratch. The quality of painting of Chevrolet Niva cars is very good in my opinion, with year-round use in salty Moscow, the factory coating does not cause any complaints after five years of operation. But nevertheless, I also encountered the problem of touch-up.

Of course I searched and found the number for that paint. what color is my car, but I decided that what I dug up would be useful to many “Shnivovods”, do not be lazy to add your comments on the issues of Chevrolet Niva colors, Chevrolet Niva paint numbers, maybe I can add and correct something.

What is the difficulty? It would seem that it could be simpler in our world of abundance. But it was not there! At a minimum, in order to buy the coveted can of paint, you will need to know the paint color number, as well as the manufacturer and type of paint, acrylic, alkyd, two-component, etc.

And here lies the first secret.

But the fact is that different manufacturers of automotive enamels have their own numbering, moreover, manufacturers often produce certain paints for any project! Just as the manufacturer of the Chevrolet Niva, the GM concern, did. A very important point is who produces paints for a particular car manufacturer, because... Each car paint manufacturer has its own numbering. In particular, for the production of the Chevrolet Niva, the GM concern uses paints from the world-famous concern MOTIP DUPLI GROUP (Holland-Germany). The Motip concern, which produces paints for painting the Chevrolet Niva, thanks to its flexible marketing and active innovation policy, is a recognized world leader in the production and sale of the widest range of aerosol paints and varnishes for automotive, household and decorative purposes, as well as high-quality auto cosmetics and technical aerosols .

The Motip Dupli Group concern was formed in 1998 as a result of a merger (Holland), Vogelsang Holding (Germany-Switzerland) and the company producing putties and primers Weber&Wirth.

Of course, I managed to find out all this in the process of searching for the required paint for my beloved Chevy Nivika, which I am sharing here.

So, let's start with the colors of the Chevrolet Niva car produced by GM, and at different times, Chevrolet Niva cars were produced in completely different colors and, moreover, the colors of previous years were not released later, but in the table I did not consider it necessary to divide the colors into old and new, because The article is not so much historical as technical and is designed to help people look for their paint number for their favorite Chevrolet Niva car:

GM MOTIP 805

1 Chevrolet Niva 115 Bright red metallic (“Extravaganza”)

2 Chevrolet Niva 158 Gray-brown metallic (“Auster”)

3 Chevrolet Niva 169 Gray-green metallic (“Foggy Morning”) Misty Morning

4 Chevrolet Niva 240 White (“Iceberg”)

5 Chevrolet Niva 360 Dark gray-green metallic (“Sochi”)

6 Chevrolet Niva 483 Blue-gray metallic (“Sirius”)

7 Chevrolet Niva 606 Black and blue metallic (“Milky Way”)

8 Chevrolet Niva 630 Metallic gray (“Quartz”)

9 Chevrolet Niva 690 Light silver metallic (“Snow Queen”)

10 Chevrolet Niva 902 Dark blue metallic “Poseidon”

11 Chevrolet Niva 903 Dark gray metallic “Dolphin”

12 Chevrolet Niva 918 Dark brown metallic (“Wild plum”)

Source

Let's sum it up

If you would like to see the table, please use the data in this post. You can determine the painted areas without viewing the original information on the car. The thickness of the car's paintwork will be uneven; it is often possible to visually determine the places where painting was done. But sometimes this task will be quite difficult.

In the automotive market, every second car went through a painting procedure after purchase. And determining this fact will allow you to knock several hundred dollars off the cost of a used car. So preparing for a body survey can really pay off. If you do not find any signs of repair, then you can safely buy such a car and enjoy its operation.