02/26/2022 2,519 Alarms
Author: Victor
Setting up key fobs for the Alligator alarm depends on the model and functions of the system, but regardless of the type, it begins with binding to the control unit. Programming is carried out according to one algorithm using the Vallet service button. If it was not possible to program the remote control in this way, then you need to contact a service center, since more modern Alligator key fobs sometimes require manual registration of the code.
[Hide]
Characteristics of the Alligator alarm
General characteristics of Alligator keychains:
- the battery in the main key fob is used at 1.5 volts, and in the additional one - 3;
- The main remote controls have a button locking feature to prevent accidental pressing;
- signal transmission frequency 433-868 MHz;
- operating range - 1200 m;
- car search mode;
- panic mode - siren and alarm signals are activated;
- option to call the car owner from the salon;
- Anti-Hijack mode - protection function against robbery;
- Valet mode to disable all security functions of the anti-theft system.
More expensive and popular models have:
- automatic engine start based on air temperature or timer;
- two-way communication;
- work radius - 2500;
- Safe Start functions (checking logical neutral);
- Short Stop function (arming the car while the engine is running);
- Turbo Cooldown (after active driving and arming the turbocharged car, the engine runs for a few more minutes to cool the turbine);
- possibility of using additional channels.
Connecting a new car alarm pager with feedback
Synchronization of the control panel of the Alligator anti-theft system is performed according to the following algorithm.
- Turn off security mode. Turn on the ignition.
- During the allotted period of time (fifteen seconds), turn on “Jack” three times. The system will emit three siren sounds and the LED will flash slowly.
- Click the “closed lock” button on the remote control. A long CHIRP will follow. The transmitter will make one sound.
- Repeat the previous step for the remaining key fobs.
- Exit recording mode by turning off the ignition or doing nothing for fifteen seconds. You will hear a short and long siren signal.
How to program the key fob?
To set up key fobs, first of all, the car owner needs to program them correctly:
- The Vallet service button is activated with one click (the ignition must be turned off at the time of this procedure).
- After activation, the Vallet key will need to be clicked three more times in a row, after which the device will emit a characteristic signal.
- Immediately after the signal, the owner needs to press the keys on the key fob one by one, thereby synchronizing them with the device on the car.
- At the end of the procedure, the ignition must be turned on and then turned off again, and only then can the operation of the security system be checked in practice.
Matvey Efimov shows how you can register and reprogram the Alligator key fob.
Autorun errors
The main reasons for the failure of the automatic start system, in which the Alligator does not work, may be incorrect settings and technical malfunctions of the car engine:
- Automatic start by timer or temperature only works when the security mode is on;
- The engine runs at high speeds (silence occurs, restarts are cancelled);
- The oil pressure sensor and indicator do not work;
- The car is not set to the handbrake;
- There is no transmission "logical neutral" confirmation in automatic transmissions;
- There is no engine speed data (the tachometer does not work);
- The car doors or hood are open;
- In diesel units there is no confirmation of the readiness system of the pre-launch mechanism (warming up of the mechanisms);
- The specified time for the autorun program has expired.
For the correct operation of all settings, it is important to remember: if during a programmed start a command was given to stop the engine remotely, it will be turned off, but the device will repeat the start strictly according to the specified schedule. All program algorithms are saved when the security mode is disabled - the next time you arm it, autostart will work at the preset time until you reset the timers. During random engine shutdown, the system starts a new timing every 24 hours according to the factory settings.
The Alligator alarm system is a powerful anti-theft tool that has a lot of useful functions and settings. With its help, you can protect the vehicle from unauthorized access, as well as increase the comfort of using the machine. There are a large number of models from this manufacturer available on the market, so in order to choose the best option, you should familiarize yourself with its characteristics and operating parameters.
Designation of buttons and their functions on Alligator key fobs
The entire line of Alligator alarms consists of 16 different models, differing in functionality:
- A-1;
- A-1 S;
- A-2;
- A-2 S;
- A-3;
- A-3 S;
- A-9;
- S-2;
- S-2S;
- S-300;
- S-3S;
- S-5;
- S-500;
- NS-505;
- S-825RS;
- SP-75RS.
ALLIGATOR A-1, A-1S and NS-505
Three-button alarm types Alligator with one-way communication and basic scan protection. With their help, the user can silently arm and disarm the car from the alarm system, as well as control the door and trunk locks remotely.
Button | Confirmation signals | Function |
One siren signal + one turn on turn signals |
| |
Two additional turn signal activations | Arming a car without a warning zone of a shock sensor and an additional sensor (you need to press and release the button within 5 seconds after arming the car) | |
Three additional turn signal activations | Arming a car without both warning zones of a shock sensor and an additional sensor (you need to press and release the button twice within 5 seconds after arming the car) | |
— | Locking the doors when the car engine is running (you need to press and release the button with the security system disabled, the ignition on and the doors closed) | |
One siren signal + one turn on turn signals | Arming with the power unit running (press and hold the button for 3 seconds) | |
One turn signal activation | Arming a car without sound | |
Four additional turn signal activations | Arming the system with a “silent” operation mode (you need to press the second button within 4 seconds after pressing the first) | |
Two siren signals + two turn signals |
| |
Two siren signals + two turn signals | Disarming the car and opening all doors (you need to press the button within 5 seconds after disarming the car) | |
Two turn signals | Disarming the car without noise (press the second button within 5 seconds after pressing the first) | |
— | Opening the doors with the engine running (you need to press and release the button with the security system disabled, the ignition on and the doors closed) | |
— | Control of the security system additional channel output / control of the luggage compartment lock and other additional devices (press and hold the button for 1.5 seconds) | |
Turn on the siren | Enabling Panic mode from a distance (the buttons must be pressed simultaneously and held for 3 seconds with the ignition off) | |
Turning off the siren | Disabling Panic mode from a distance (buttons must be pressed simultaneously) | |
Five siren signals + 10 turn signals | Search for a car (press the buttons simultaneously and hold for 1 second with the ignition off) | |
One siren signal + LED on for five seconds | Enabling Anti-HiJack mode from a distance (press the buttons simultaneously and hold for 3 seconds with the ignition on) | |
Any | — | Turning off the alarm when the anti-theft system is activated |
Photo gallery
Photo of model A-1
Photo of model A-1S
Photo of model NS-505
ALLIGATOR A-2, A-2S, A-3 and A-3S
The manufacturer equipped the models with three buttons and one-way communication.
Distinctive features:
- The A-2S has a shockproof body;
- A-3 and A-3S have a new design and self-diagnosis function.
The key fob buttons and their functions are identical for all models:
Button | Function |
| |
Arming with disabling the warning zone of the shock sensor and additional sensor (press the button within 5 seconds after arming the system) | |
Arming with disabling both zones of the shock sensor and additional sensor (press and release the button twice within 5 seconds after arming the system) | |
Locking the doors while the engine is running | |
Enabling the security mode with the engine running (press and hold the button for 3 seconds), if the arming function with the engine running is enabled | |
Silent arming | |
Arming with a “silent” operation mode (press the second button within 4 seconds after pressing the first) | |
| |
Disarming and unlocking all doors (press the button within 5 seconds after disarming the system). | |
Silent disarming (press the second button within 5 seconds after pressing the first). | |
Unlocking the doors while the engine is running | |
Control the output of additional channel No. 2 / control the trunk lock or additional devices (press and hold the button for 3 seconds) | |
Control the output of additional channel No. 3 / control additional devices (press the buttons simultaneously) | |
Remote activation of the “Panic” mode (press the buttons simultaneously and hold for 3 seconds with the ignition off) | |
Remote switching off of the “Panic” mode (press the buttons simultaneously) | |
Search for a car (press the buttons simultaneously and hold for 1 second with the ignition off) | |
Remote activation of the Anti-HiJack mode (press the buttons simultaneously and hold for 3 seconds with the ignition on, if the “Remote activation of the Anti-HiJack function using a key fob” function is enabled) | |
Remote activation and deactivation of the service mode (press the buttons simultaneously and hold for 3 seconds with the ignition on, security mode off and Anti-HiJack mode off) | |
Any | Disabling the alarm mode when the system is triggered |
Photo gallery
A-2
A-2S
A-3
A-3S
ALLIGATOR A-9, SP-75RS and S-825RS
Of the entire “A” series of car alarms, Alligator model 9 is the only one, like the S-825RS and SP-75RS, equipped with:
- auto start system;
- two-way communication;
- LCD display.
LCD display of 5-button key fob
Designation of icons on the display:
Icon | Meaning |
Two-stage disarming mode | |
Service mode | |
Sound notification | |
Security mode is on | |
Immobilizer | |
Engine operation indication | |
Door lock | |
Alarm | |
Indication of current/programmed time or temperature | |
Anti HiJack Mode | |
Indication of an attempt to turn on the ignition in security mode/indication of the “Immobilizer” mode | |
Automatic engine start at low temperature | |
Automatic engine start at preset time | |
Indication of the execution of the logical netral procedure | |
Current time, alarm time, countdown timer | |
Power Saving Mode | |
Locking key fob buttons | |
Vibration alert | |
Security mode is disabled | |
Battery charge indicator | |
Turbo mode | |
Main sensor area | |
Timer | |
Driver call mode | |
Silent security mode | |
Feedback indication | |
Transmission mode | |
Automatic engine start when battery level is low | |
Automatic engine start by timer |
Functions of the berelok buttons:
Button | Function | Note |
Remote arming or remote door closing (in Valet mode or with the ignition on) | Click | |
Arming a vehicle with disabling the sensor warning zone | Press consistently for 5 seconds | |
Arming a vehicle by disabling both sensor zones | Press consistently for 5 seconds | |
Any button except F | Disabling Alarm Mode | Press in alarm mode |
Silent arming | Press and hold | |
Enabling “silent” security mode | Press consistently for 4 seconds | |
Remote disarming or remote door unlocking (in service mode or with the ignition on) | Click | |
Unlocking doors in 2 stages when disarming the system | Press consistently for 5 seconds | |
Silent disarming | Press and hold | |
Silent disarming with door unlocking in 2 stages | Press and hold the key for 2 seconds, then press and release | |
Channel output No. 2 (remote trunk unlocking / control of additional devices) | Press and hold | |
Channel output No. 3 (control of additional devices) | Press and hold | |
Enabling Panic mode from a distance | Press and hold at the same time with the ignition off | |
Turning off Panic mode from a distance | Press simultaneously | |
Enabling the Anti-HiJack mode | Press and hold simultaneously with the ignition on | |
Remote enable/disable Valet mode | Press and hold simultaneously after turning off the ignition (no more than 15 seconds should pass) | |
"Car search" | Press the buttons simultaneously with the ignition off | |
Remote engine start/shutdown, activation of the “Short Stop” function | Press the button successively for 3 seconds | |
Extending the operating time of a car engine by 1 cycle | Click | |
Extending engine operating time to unlimited | Press consistently for 3 seconds |
Photo gallery
A-9
SP-75RS
S-825RS
ALLIGATOR C-2 and C-2C
Popular four-button samples from the more advanced line of Alligator security systems with two-way feedback.
LCD display of 4-button key fob
Designation of display icons:
Icon | Meaning |
Shock sensor | |
Alarm | |
Countdown timer | |
Feedback | |
Radiation | |
Ignition on, key fob buttons locked | |
Vibrate alert enabled | |
Sound notification enabled | |
Anxiety | |
Security is on and/or doors are locked | |
Security is turned off and doors are unlocked | |
Trunk open | |
The door is open | |
Anti-robbery mode | |
Driver call | |
Engine running | |
Service mode enabled | |
Disarming mode in 2 stages | |
Immobilizer | |
Battery charge | |
Current time, alarm time, countdown timer |
Functions of the key fob buttons Alligator C2 and C2-C:
Button | Function | Note |
Remote arming or remote door closing (in service mode or with the ignition on) | Click | |
Arming a car with disabling the sensor warning zone | Press at any time after arming | |
Arming with disabling both sensor zones | Press at any time after arming and disabling the warning zone | |
Returning to security mode with a working sensor | Click | |
Silent arming | Press and hold for 1.5 seconds | |
Enabling the vehicle security mode with the engine running | Press and hold for 1.5 seconds with the ignition on | |
Enabling “silent” security mode | Press consistently for 4 seconds | |
Remote disarming or remote door unlocking (in service mode or with the ignition on) | Click | |
Remote disarming with unlocking of all doors (if this function is enabled) | Press sequentially | |
Silent disarming | Press and hold for 1.5 seconds | |
Channel output No. 2 (remote trunk unlocking / control of additional devices) | Press and hold for 1.5 seconds | |
Channel output No. 3 (control of additional devices) | Press consistently for 4 seconds | |
Remote activation of the “Panic” mode | Press simultaneously and hold for 1.5 seconds. with the ignition off | |
Remote switch off of Panic mode | Press simultaneously | |
Remote activation of the Anti-HiJack mode | Press simultaneously and hold for 1.5 seconds with the ignition on | |
Remote activation/deactivation of service mode | Press simultaneously and hold for 1.5 seconds | |
"Search for a car" | Press simultaneously with the ignition off | |
Disabling the alarm mode when the system is triggered | Click |
Photo gallery
C-2
C-2C
ALLIGATOR C-300 and S-3C
A special feature of the C-3C model with auto start is the new firmware using BACS technology. The reliability of the system lies in the fact that it picks up the signal at a distance of 600 m without any obstacles and protects against hacking.
LCD display of 4-button key fob transmitter
Designation of display icons:
Icon | Meaning |
Shock sensor main/warning zone | |
Alarm clock indication | |
Indication that the countdown timer is on | |
Feedback indication | |
Command transmission indication | |
Indication of ignition on, locking of key fob buttons | |
Vibration alert enabled | |
Sound notification enabled | |
Alarm indication | |
Doors are locked | |
Doors unlocked | |
Trunk open | |
The door is open | |
Degrees Celsius | |
Driver call | |
Engine operation indication | |
Indication of service mode operation | |
Disarming mode in 2 stages | |
Passive engine blocking | |
Battery charge indicator | |
Indication of current time, alarm time, countdown timer | |
Security is on | |
Security disabled | |
GSM module connected | |
Indication of the execution of the “Logical Neutral” test procedure | |
Anti-robbery mode | |
Automatic engine start at preset time | |
Automatic engine start by timer | |
Automatic engine start at low temperature |
Functions of the key fob buttons Alligator C-300 and C-3C:
Button | Function | Note |
Remote arming or remote door locking (in service mode or with the ignition on) | Press and release | |
Arming with disabling the sensor warning zone | Press at any time after arming | |
Arming with disabling both sensor zones | Press at any time after arming and disabling the warning zone | |
Returning to security mode with working sensors | Press and release | |
Silent arming | Press and hold for 1.5 seconds | |
Enabling “silent” security mode | Press successively for 4 seconds | |
Remote disarming or remote door unlocking (in service mode or with the ignition on) | Press and release | |
Remote disarming with unlocking of all doors (if this function is enabled) | Press sequentially | |
Silent disarming | Press and hold for 1.5 seconds | |
Channel 2 output (remote trunk release/accessory control) | Press and hold for 1.5 seconds | |
Channel 3 output (additional device control) | Press consistently for 4 seconds | |
Remote activation of “Panic” mode | Press simultaneously and hold for 5 seconds with the ignition off | |
Remote switch off of Panic mode | Press and release at the same time | |
Remote activation of the “Anti-HiJack” mode | Press simultaneously and hold for 5 seconds with the ignition on | |
Remote activation/deactivation of service mode | Press simultaneously and hold for 1.5 seconds | |
“Search for a car” | Press and release simultaneously with the ignition off | |
Disabling the alarm mode when the system is triggered | Press and release | |
Remote start/stop of car engine | Press consistently for 4 seconds | |
Extending engine operating time by 1 cycle | Press the button, then within 4 seconds press and hold this button for 1.5 seconds again | |
Extending engine operating time for an unlimited time | Press simultaneously and hold for 1.5 seconds |
Photo gallery
C-300
C-3C
Alligator S-5 and S-500
Models are equipped with auto engine start and two-way communication.
LCD display of 5-button key fob transmitter
Icon designation:
Icon | Meaning |
Two-stage disarming mode | |
Service mode | |
Sound notification | |
Indication of an attempt to turn on the ignition in security mode | |
Immobilizer | |
Engine operation indication | |
Door lock/Security mode | |
Alarm | |
Anti HiJack Mode | |
Transmission mode | |
Automatic engine start at low temperature | |
Automatic engine start at preset time | |
Disabling the sensor warning zone | |
Indication of current/programmed time or temperature | |
Power Saving Mode | |
Main shock sensor area | |
Vibration alert | |
Indication of the execution of the logic neutral procedure | |
Battery charge indicator | |
Turbo mode | |
GSM module connection indication | |
Timer | |
Silent security mode | |
Feedback indication | |
Alarm indication | |
Automatic engine start by timer | |
Disabling the sensor |
Functions of key fob buttons for car alarms Alligator C-5 and C-500:
Button | Function | Note |
Remote main arming or remote door locking (in service mode or with the ignition on) | Click | |
Arming with disabling the warning zone of system sensors | Press at any time after arming | |
Arming with disabling both sensor zones | Press at any time after arming and disabling the system sensor warning zone | |
Returning to security mode with working sensors | Press at any time after turning off the system sensors | |
Any button except F | Disabling Alarm Mode | Press in alarm mode |
Alternative (silent) arming | Press and hold | |
Basic activation of the “silent” security mode | Press sequentially | |
Remote main disarming or remote door unlocking (in service mode or with the ignition on) | Click | |
Unlocking doors in 2 stages when disarming the system | Press at any time after disarming the system | |
Alternative (silent) disarming | Press and hold | |
Alternative (silent) disarming with door unlocking in 2 stages | Press and hold for 2 seconds, then press and release | |
Channel output No. 2 (remote trunk release/control of additional devices) | Press and hold | |
Channel output No. 3 (remote control of additional devices) | Click | |
Remote activation of the “Panic” mode | Press and hold simultaneously for 5 seconds with the ignition off | |
Remote switch off of Panic mode | Press simultaneously | |
Remote activation of the Anti-HiJack mode | Press and hold simultaneously for 5 seconds with the ignition on | |
Remote activation or deactivation of service mode | Press and hold simultaneously | |
"Search for a car" | Press simultaneously with the ignition off | |
Remote start / shutdown of the engine or activation of the “Short Stop” function | Press and hold | |
Extending engine operating time by 1 cycle | Click | |
Extending engine operating time to unlimited | Press sequentially |
Photo gallery
C-5
C-500
Advantages and disadvantages of Alligator security systems
If you read reviews from users of Alligator systems, you can highlight the following advantages:
- Notifying the car owner about prohibited actions near the car and sending alarm signals to a pager.
- A wide selection of models, which allows the driver to choose the best option, guided by personal desires and finances. Even cheap models do their job well.
- Burglary resistance. The use of security channels that prevent theft.
- The basic kit includes a multifunctional remote control that allows you to deeply configure the system and remotely control the main components of the machine.
- Compliance with all quality and reliability requirements.
- Availability of detailed instructions for use.
The disadvantages include:
- Frequent failures of the alarm when pressing the button. A similar problem is noticed when the battery charge level is zero, so the driver must regularly change the batteries. To fix the problem, you should use the “Valet” service button.
- Often, when trying to activate the security functions, the doors refuse to close. A problem like this often indicates a problem with the safety device or door lock. To eliminate the defect, you should seek professional help.
- Arbitrary alarm activation. Such a defect is noticed when the operating parameters are incorrectly selected. To determine it, you should diagnose the controller. If it is faulty, you need to replace it.
Download operating and configuration instructions in PDF
Manuals can be viewed and downloaded for free from the table:
Manuals in Russian for the use and installation of alarms | |
Instructions for Alligator A-1 | |
Instructions for Alligator A-1S | |
Instructions for Alligator A-2 | |
Instructions for Alligator A-2S | |
Instructions for Alligator A-3 | |
Instructions for Alligator A-3S | |
Instructions for Alligator A-9 | |
Instructions for Alligator C-2 | |
Instructions for Alligator S-2C | |
Instructions for Alligator S-300 | |
Instructions for Alligator C-3C | |
Instructions for Alligator C-5 | |
Instructions for Alligator C-500 | |
Instructions for Alligator NS-505 | |
Instructions for Alligator S-825RS | |
Instructions for Alligator SP-75RS |
Old models
Despite the wide variety of new alarm systems, old-style models continue to be popular.
S-825RS
The device is one of the most popular in its price segment and at the same time guarantees a high degree of machine protection against theft and burglary. The system supports a number of useful functions, operates in different temperature ranges with two-way communication standards.
The kit includes a built-in pager with a screen, which allows the driver to monitor the condition of the car. Dynamic code is used as a standard of protection, eliminating the possibility of intelligent hacking. The range is 2000 and 1000 m. The first indicator indicates the ability to transmit a signal, and the second indicates the ability to change settings.
Signaling Alligator C-500 supports 2-way communication and remote engine starting using a pager with 5 buttons and a screen. All information about the state of the machine, current configurations and other indicators is displayed on the monitor and is completely Russified.
The model operates according to the 868 mhz standard, which makes it virtually invulnerable to electronic hackers. The range reaches 3 km if there is no interference at the location of the machine. This value is a record for modern anti-car theft systems.
Since the model is equipped with a CAN bus, it is less exposed to radio noise and is protected from pulse interception.
The technical characteristics of the model are as follows:
- The on-board voltage of 12 V is used as a battery for the alarm unit.
- The pager is powered by 1.5 V batteries.
- The additional key fob is equipped with 3-volt batteries.
- The system supports the function of blocking the power unit when trying to steal a car.
- A special code value is used to identify the driver.
- The processor module is equipped with an output for connecting additional locking devices.
- The device is equipped with additional channels for connecting auxiliary systems.
SP-75RS
The SP-75RS alarm system is the latest invention of the Alligator company, which is reliably protected from electronic hacking and is not afraid of urban interference. The response speed deserves special attention - it is 1/4 second.
The system supports feedback and can start the engine remotely. Key autorun functions include:
- Possibility of maintaining optimal temperature conditions throughout the year.
- There is no risk of engine freezing when exposed to severe frosts.
- Providing valuable coolness during the summer when it is hot outside.
- Ability to adapt the autorun function based on the countdown timer, temperature and other indicators.
- Daily launch at a selected time interval.
- Launch depending on the on-board network indicators.
How much does an Alligator alarm cost?
You can buy Alligator car alarm models at the following prices:
Name | Price, rub |
Alligator A-1 | 1800 |
Alligator A-1S | 1815 |
Alligator A-2 | 2000 |
Alligator A-2S | 2090 |
Alligator A-3 | 2100 |
Alligator A-3S | 2250 |
Alligator A-9 | 6350 |
Alligator S-2 | 3900 |
Alligator C-2C | 4000 |
Alligator S-300 | 4400 |
Alligator S-3S | 5400 |
Alligator C-5 | 8900 |
Alligator S-500 | 10400 |
Alligator NS-505 | 3000 |
Alligator S-825RS | 5400 |
Alligator SP-75RS | 4900 |
Prices are relevant for three regions: Moscow, Chelyabinsk, Krasnodar. |
L Series Binding Features
It is possible to program the key fob in the L series security system as follows:
- Disarm the car.
- Sit in the driver's seat.
- Turn on the ignition.
- Move the “Jack” switch three times from the off position to the on position.
- Wait for one siren signal. The indicator will flash once. The programming mode will turn on, allowing you to configure the control of Channel 1.
- Press button 1 or 2 on the key fob. The selected key will control the first channel.
- A long alarm signal will confirm that the alligator key fob has been successfully registered.
- Change the position of the Valet switch once.
- Wait for a long beep.
- Check that the indicator flashes twice.
- Start programming the second channel.
- Press and hold the remaining unregistered button.
- Wait for a long sound of the siren.
- Wait 15 seconds. You can speed up the deactivation of the programming mode by turning off the ignition or double changing the position of the “Valet” switch
When binding the Alligator alarm key fob, regardless of the series, it is important to complete each action within a 15-second interval.
Otherwise, the programming mode is automatically deactivated. To reflash the key fobs, in this case, you need to start all over again.
Tired of paying fines? There is an exit! Forget about fines from cameras! An absolutely legal new product - Traffic Police Camera Jammer, hides your license plates from the cameras that are installed in all cities. More details at the link.
- Absolutely legal (Article 12.2);
- Hides from photo and video recording;
- Suitable for all cars;
- Works through the cigarette lighter connector;
- Does not cause interference to radios and cell phones.
Find out more Subscribe so you don't miss anything important
Content
- Instructions for enabling and disabling auto start on Alligator alarms
Video
Point Black talks about the process of choosing a reliable signaling model from the Alligator company.
Do you have any questions? Specialists and readers of the AUTODVIG website will help you ask a question
Was this article helpful?
Thank you for your opinion!
The article was useful. Please share the information with your friends.
Yes (60.00%)
No (40.00%)
X
Please write what is wrong and leave recommendations on the article
Cancel reply
Rate this article: ( 5 votes, average: 4.60 out of 5)
Discuss the article:
User guide
To set up the Alligator alarm, you should study the instructions for use first.
Installation instructions
To install the Alligator alarm system, you need to understand the basic intricacies of installation. They consist of the following stages:
- Planning the installation site. The driver must provide an optimal place, hidden from prying eyes, to connect the batteries. To do this, you need to familiarize yourself with the connection diagram
- Preparation for installation of a microprocessor device. The part must be installed in a hidden place, behind the control panel, so that an attacker cannot hack it.
- The next stage involves installing the signaling system in the engine compartment. You need to place a siren and a temperature sensor near the engine. The controller is fixed in one of the cooling system lines,
- Next, the driver does interior work, when he installs the sensitivity controller, transceiver and additional parts. The switches are attached to the doors. If the car is new and there are no technological holes on the doors, you should talk to the dealer before drilling.
- After completing the installation of all working units, they need to be connected to the processor unit by removing part of the interior trim and securing the electrical circuits under the upholstery.
Connection diagrams
To simplify the connection of working mechanisms and parts, you need to familiarize yourself with the Alligator alarm connection diagram.
User manual
When studying the operating instructions for the Alligator user, you need to understand the designation of the basic buttons, programming features and other configurations.
What do the icons and buttons on the key fob mean?
The pager of many Alligator alarm models has 4 buttons. To understand their purpose, you should study the instructions for using the key fob.
How to enable and configure autorun
To enable automatic engine start, you must ensure that the following rules are followed:
- The machine is located in an open space with good air exchange.
- The car is on the handbrake.
- The automatic transmission selector is moved to the parking position, and the mechanical lever is placed in neutral gear.
To open the settings menu, you need to hold down the F button.
Other settings
Alligator alarms also provide other settings, including an alarm clock and a timer. To activate the first option, you must simultaneously press the F key and the open trunk button. The successful activation of the function will be signaled by a corresponding sound.