The Hyundai Accent timing belt serves as the connecting link between the crankshaft and camshaft. There are few differences between belts for 8-valve and 16-valve engines - the latter have only 2 teeth more. Be sure to check compatibility before purchasing. It is also necessary to mention a small feature of the Accents - it has one camshaft pulley. But inside the cylinder head of 16-valve engines there are two toothed pulleys connected by a metal chain, which is lubricated with engine oil. This greatly simplifies the adjustment of the gas distribution mechanism, since the two camshafts will operate synchronously in any case.
Main problem
The problem lies in the fact that in order to get to the belt itself and even just remove it, you have to do a lot of other work that takes both energy and time and destroys nerve cells.
Therefore, for those people who have little time or do not want to waste their nerves, we recommend entrusting this important work to a service station, because today the timing belt is one of the important components of modern car engines, and its correct replacement will greatly influence the smooth operation of the engine. further.
In addition, the timing belt operates under very difficult conditions, and the car owner is obliged to constantly monitor its condition and, at the slightest suspicion of its malfunction, immediately take replacement measures.
For those Hyundai Accent owners who still decided to try their hand, we will dwell in more detail on all the operations for replacing the timing belt on this passenger car.
Before you start changing the timing belt of your car, you need to use a lift or drive into an inspection pit.
It is imperative to immediately replace the timing belt tension rollers, so make sure to purchase them in advance.
If this condition is not met, the belt will quickly wear out or the old roller will simply jam and break the belt.
When performing work to change the timing belt, you must carefully follow the steps specified in the instructions. Carefully ensure that all existing marks strictly match.
After removing the belt, it is necessary to avoid further rotation of the camshaft and crankshaft, as this will completely disrupt important adjustments.
Step-by-step instruction
- Loosen the four bolts securing the pump pulley. Socket wrench 10.
To prevent the pump pulley from turning, engage fifth gear.
- Loosen the power steering pump. The top bolt can be unscrewed in two ways:
- open-end wrench 12 from above.
Power steering pump mount.
- head 12 through the window in the power steering pump pulley.
- We also loosen the fastening from below and move the power steering towards the cylinder block, thereby loosening the belt tension.
Power steering pump.
- We loosen the locking bolt of the generator belt tensioning mechanism and unscrew the adjusting bolt to the maximum. The key is 12. We move the generator towards the engine. Remove the drive belt.
Generator tensioning mechanism.
- Loosen the nut of the air conditioning compressor belt tension roller and unscrew the adjusting bolt. Head 14 and 12.
Air conditioner tension roller.
- Remove the pump pulley. Four 10mm bolts.
- We dismantle the upper protective timing cover by unscrewing the four bolts. Head for 10.
Upper timing cover.
Set top dead center (TDC)
- Rotate the crankshaft clockwise until the mark on the cylinder head matches the hole in the camshaft toothed pulley.
Important! Rotate the crankshaft only clockwise, otherwise increased force will be applied to the valve timing components.
Mark on the cylinder head.
Mark on the camshaft pulley.
- To more accurately determine whether the marks match, you can insert a rod or hexagon of suitable diameter into the hole and look behind the camshaft pulley to see whether it hits the mark or not.
- We block the crankshaft and unscrew the bolt of the auxiliary units pulley, also known as the crankshaft pulley.
To block the crankshaft, engage fifth gear and install a screwdriver in the ventilation hole of the front wheel brake disc below the caliper.
Crankshaft pulley bolt.
- We dismantle the crankshaft pulley and the mudguard.
- Unscrew the fastening of the lower timing belt protective cover and remove it. Head for 10.
Lower timing cover.
- The marks on the crankshaft timing pulley and the oil pump must also match. If this is not the case, you can let them down by turning the brake disc without turning off fifth gear.
Crankshaft marks.
- We loosen the tension roller locking bolt and lift it up as far as possible and tighten it in this position.
- Remove the timing belt and tension roller.
How often to change the timing drive
The operating instructions for the Hyundai Accent car provide information for the driver on how often the timing belt needs to be changed.
Every car owner should know that the operation of a passenger car in Russia occurs in more difficult climatic and road conditions.
It is advisable to replace the timing belt on a Hyundai Accent after 50,000 kilometers.
Pros and cons of Hyundai Accent TagAZ
The advantages of the car are:
- good looks;
- powerful engine;
- smooth control;
- budget pricing policy;
- price of service;
- spare parts are cheap and can be bought at any auto store;
- the designs are at the highest level;
- chassis.
There are several notable disadvantages:
- small capacity for rear seat passengers;
- simple finishing;
- there is practically no sound insulation, you have to do it yourself, you can clearly hear the Hyundai Accent fuel pump working under the rear seat;
- The prestige of the model is at a low level - Elantra, for example, has a higher class.
You can buy a Hyundai Accent on the Russian market for a reasonable price - it varies from 150,000 thousand rubles (old and rather “dead” cars) to 350,000 (the most recent and “vigorous”). The Taganrog assembly also has advantages - air conditioning, new audio systems and power steering were installed on the cars.
How to determine when it's time to replace the timing belt
Usually the timing belt makes itself felt by making unpleasant sounds while the engine is running; these are the first prerequisites for replacing it.
The driver is required to periodically conduct a visual inspection of this part.
Various damage usually appears on the surface of the belt in the form of cracks or severe abrasions; in this case, it is advisable to quickly replace it.
Checking the timing belt.
As a rule, drivers deliberately try to delay this operation or may install it incorrectly, which will lead to its breakage.
The result is expensive vehicle repairs.
Replacement Regulations
The timing belt is an important engine component. Its rupture leads to serious malfunctions - damage to the intake and exhaust valves. Such an internal combustion engine will need a major overhaul. Car owners are advised to monitor the condition of the belt; at the slightest sign of wear, they should contact a service station. Signs of belt wear:
- numerous cracks;
- tooth wear;
- extraneous noise during operation of the mechanism
- wear of tension rollers;
- presence of rubber shavings in the timing cover;
- traces of oil or other automotive fluid on the belt.
The recommended interval for replacing the timing belt on a Hyundai Accent, regardless of the type and engine size, is 60 thousand km. This work is classified as complex and requires special skills, tools and equipment. Inexperienced motorists are recommended to replace the timing belt at a service station. If you have experience in car mechanic work, you can change the timing belt yourself in a garage.
Choosing a timing belt for a Hyundai Accent car
Undoubtedly, it is best to buy original products. Today, the cost of an original part for the gas distribution mechanism of a Hyundai Accent car is quite high.
Therefore, many car owners try to choose high-quality parts from other companies, for example, Dayco, ContiTech, Bosch.
A quality product will never have a strong unpleasant odor, is usually sold in good quality packaging and is not stretched by hand.
When choosing a timing belt for a Hyundai Accent, be sure to tell the specialized store salesperson the number of engine valves in your car.
Today, two versions of power units are available that are equipped with the Hyundai Accent: SOCH with 12 valves and 16-valve DOCH. Also read for what reasons and on what engines valves bend.
In addition, SOCH engines are equipped with a timing belt with a standard tension roller, and DOCH engines, respectively, with two rollers.
Suspension
By 80 thousand km it will be necessary to change the stabilizer struts along with the bushings. If the car is driven on rough roads, the shock absorbers may fail.
In addition, you need to pay attention to the brake cylinders; they may be damp. In addition, if the car was driven on bad roads, the wheel bearings fly
If you hear a characteristic sound, then it’s time to change them. The automatic transmission of the Alpha-Beta series can present a surprise at the end of 100 thousand km.
The car can also go into catastrophic mode. The complaint will most likely be about overheating. It is necessary to clean the radiator honeycombs, sweep away the filter and oil.
If the box does not provide indicators of fate, then you need to go to the service center. Indeed, I note that the service will solve this problem quickly and inexpensively.
Like any car, the Hyundai Pronouncement has its pros and cons. Specifically, the car costs its own money and earns it honestly. Indeed, finding a “living” reprimand is becoming more and more difficult from year to year. It goes without saying, if the design of the car does not matter to you, you can safely consider the Reprimand as a good option for a budget-friendly, reliable aftermarket car. When purchasing a supported Reprimand, it is worth spending time searching for a good option, recognizing its “sore spots” and eliminating shortcomings.
Then the Reprimand will serve you for quite a long time.
Replacement Regulations
The timing belt is an important engine component. Its rupture leads to serious malfunctions - damage to the intake and exhaust valves. Such an internal combustion engine will need a major overhaul. Car owners are advised to monitor the condition of the belt; at the slightest sign of wear, they should contact a service station. Signs of belt wear:
- numerous cracks;
- tooth wear;
- extraneous noise during operation of the mechanism
- wear of tension rollers;
- presence of rubber shavings in the timing cover;
- traces of oil or other automotive fluid on the belt.
The recommended interval for replacing the timing belt on a Hyundai Accent, regardless of the type and engine size, is 60 thousand km. This work is classified as complex and requires special skills, tools and equipment. Inexperienced motorists are recommended to replace the timing belt at a service station. If you have experience in car mechanic work, you can change the timing belt yourself in a garage.
Body repair Hyundai Accent
Like every car, the Accent tends to succumb to corrosion. This is especially common in cars manufactured before 2008. The sills and wheel arches shoot out first. Thresholds must be replaced, but only if the owner has welding equipment and certain skills.
To avoid, or at least delay the critical moment of the body’s condition, you should take care of this in advance. When purchasing even a new car, experts recommend anti-corrosion treatment of the bottom and fender liners, and pouring anti-corrosion mastics into the cavities of the sills and body.
Gutter gutters and engine compartment air ducts require special care in processing. Atmospheric water often stagnates there, and corrosion manifests itself most clearly at first there. It is also recommended to carry out anti-corrosion treatment of door cavities, especially focusing on the lower corner cavities, where corrosion most often occurs.
If simple engine and body maintenance work is carried out in a timely manner, the car will last for a long time and will be no worse than its Korean relatives. In capable hands, even an Accent will be able to please the owner for a long time with uninterrupted operation and long mileage.
