Which brake pads are best for VAZ cars?

It is impossible to imagine driving a car without reliable and effective brakes. Vehicle safety and people's lives depend on them.

Recently, the number of sales of VAZ cars has been increasing, which leads to an increase in demand for consumables, including brake pads. For VAZ cars, the car market offers a wide range of elements for brake systems. They are divided according to the materials used in production, their methods of fixation and brands.

In our rating, we will help highlight the Top leading brands of brake pad manufacturers for VAZ cars, guaranteeing their quality.

AC Delco

The brand is registered in the USA (a division of General Motors). One of the best brake pads used in many car models, including VAZ cars. They are reliable, last a long time, and are easy to install. Efficiency, safety, reliability, heat removal from the rotor, ensures the use of advanced technologies in the production process. Specialists have created a special semi-metallic composite mixture using steel fibers.

ACDelco has been tested to SAE J2784 standards and is proven to provide high friction braking performance. The pads have slots and chamfers that suppress noise, vibration and harshness when braking.

The drum pads are reliably protected with an anti-corrosion coating. The environmentally friendly production process does not use heavy metals or asbestos. They are similar in shape to the original brake system components and no adjustment is required during installation.

Advantages:

• reliability;
• strength;
• durability;

Flaws:

• high price.

TOP 10 best brake pads for VAZ and Lada (Front, rear)

The part itself consists of a metal base and a ceramic or synthetic lining.
Due to increased friction, components must be fire resistant and wear resistant. There are both disc and drum variations of the systems. The pads in both cases differ in shape and method of fastening. As a rule, the drum version is rarely used, and only on the rear wheels. The LADA Sport kit will cost you about 650 rubles. It already has all four parts, you don’t have to buy anything else. They have a width of 8 millimeters and a length of 11 cm. A quiet and high-quality replacement option. Don't forget to check that the article numbers match one of the ones below:

• 2108-3501080;
• 21080350180083;
• 2108-3501800-83.

AvtoVAZ itself offers a similar solution. VAZ-2108 brake pads are suitable for most VAZ car models and cost about 480 rubles. In particular, they can be installed on VAZ 211213, VAZ 2121. The set consists of two front and two rear pads.

Check that the items and dimensions on the box are correct. If the barcodes are poorly printed, the box does not match the image in the catalog - most likely, this is a fake.

Bosch BC905 Quiet Cast

The German brand Bosch is famous for its quality products. This brand produces ceramic and semi-metallic brake pads with effective braking capabilities. The manufacturer uses cast pad technology, which protects the nozzles, provides stability, strength, and noise reduction. Slots and chamfers with original design ensure good fit and performance.

The gasket with a rubber core has good insulating properties and provides quiet and soft braking. The kit includes fasteners and synthetic lubricant. These parts are suitable for cars whose drivers prefer ceramics, but do not want to lose speed in extreme conditions.

Advantages:

• low dust levels;
• use of aerospace alloy;
• reliable protective layer.

Flaws:

• high price.

STS

The Russian company “STS Company” produces good quality products for the low-price niche.

They have good friction properties and thermal stability. Together with the Friction Materials Group company (monitoring compliance with norms and standards), a unique friction composition of 15 components was created. “STS Company” produces a large line of brake pads for rear and front discs, suitable for the entire model range of VAZ cars. Based on the test results, it was found that at a speed of 100 km/h, with cold brakes, it showed good friction coefficients of 0.48.

Brake pads for VAZ 2106: replacing rear and front pads

Then we go to the left side of the mechanism and remove the cotter pin that secures the handbrake lever:. The pads squeak when braking.

Uneven pad wear. What are the best front brake pads for VAZ 2106? Why do brake pads squeak? Brakes jerkily. Top 5 repair instructions for VAZ Lada Replacement of the VAZ rear axle axle bearing - Show.

On average, the pads are yew. The service life of the brake discs is enough for a set of pads. Are the instructions useful? Yes 38 No. Every year there are a large number of companies on the market that sell VAZ 2106 front brake pads and consumables for Lada cars.

Depending on the car model and the store’s assortment, the choice of brake pads can vary.

According to the recommendations of automakers, brake pads must be replaced every 10-15 thousand kilometers, for foreign cars 15-20 thousand kilometers. The wear of drum pads is much lower and they need to be changed after 100-150 thousand km. Due to the high loads on sports cars and race cars, the pads are changed on average every 5 thousand km. Brake discs need to be replaced much less frequently.

There are no specific standards or deadlines; it all depends on driving style, weather conditions and even the presence/absence
of ABS . The front pads wear out much faster than the rear ones , but in any case, if the thickness of the friction lining is less than 2 mm, it’s time to think about replacement.

ROSDOT

A team of experienced professionals and JSC TIIR, with the participation of European specialists, create elements of brake systems for VAZ cars from harmless friction materials. The raw materials for the friction composite do not contain asbestos, nickel, or copper; they are purchased in Austria and Germany, some of which have no analogues in Russia.

Considering their low cost, ROSDOT brake pads have good wear-resistant characteristics and heat dissipation. Thanks to the use of Italian mastic, the pads do not emit extraneous noise at low temperatures and when they get wet. In terms of price-quality ratio, Rosdot front and rear brake pads have no equal. The products maintain stability of the friction coefficient over the entire operating range of temperatures, speeds and pressures;

Advantages:

• high braking efficiency;
• ergonomics;
• disc-saving properties;
• reasonable price.

Flaws:

• wear out quickly.

TOP 10 best brake pads for Lada Granta

Reviews from Lada Granta owners who decided to install FENOX BP40006O7 brake pads indicate the absence of extraneous noise when braking. Not making a squeak at a budget price is already good, but the manufacturer did not stop there: the composition of the friction lining does not spoil the brake discs, and, of course, wears out faster than the same Bosch ones, but, in general, consumables from this company make a favorable impression on users .

It should be noted that these pads have a built-in wear sensor (there is a plate in the friction layer that produces a constant creaking noise when worn). Thanks to this simple technology, installing new brake pads on time will not be difficult for even the most forgetful owners. Many reviews about the operation of FENOX pads note not only the high-quality operation of the friction clutches, but also the uniformity of the working layer and high quality manufacturing. They do not belong to the elite segment of this product, but they behave quite decently in business, providing acceptable performance of the brake circuit (both front and rear) in many cars of European brands, and even more so in the Lada Grant.

EzATI

Manufacturer: Yegoryevsk plant of asbestos technical products. The range of pads competes with Western similar products, with prices 30% lower. E55 code pads are made without the use of asbestos in the friction material, using expensive organic elements. Such pads are recommended for use in cars whose drivers love fast and aggressive driving (friction coefficient 0.46). With this driving style, their service life is 40-45 thousand km.

Pads with code T266 with stable performance characteristics and effective braking (friction coefficient 0.37). The manufacturer declares in the documentation a service life of 20-25 thousand km with a calm driving style, without constant overloads and emergency braking.

When installed, these products do not require adjustment and ensure performance for the entire declared service life. The products meet the requirements of AvtoVAZ and are supplied to its conveyors. Considering multiple counterfeits, the company, as part of product protection, began to paint metal frames using triboelectric spraying with blue polymer materials. In addition to protection against counterfeiting, this method creates mechanical and corrosion resistance, as well as a beautiful appearance.

Vati

JSC "VATI-AVTO" produces good environmentally friendly pads for domestic cars, this positions the products as safe for the environment, thereby satisfying European standards and safety requirements.

Friction properties in cold conditions and high temperatures after warming up show good results. Test results: at a speed of 100 km/h, with cold brakes, the friction coefficient is 0.35, when they are heated to 250 degrees, the coefficient increases to 0.37. During the mountain test cycle, the braking coefficient is 0.40, and during cooling – 0.47. The products are characterized by good wear resistance, no dust formation, and a gentle effect on brake discs.

Advantages:

• good quality/price ratio;
• durability;
• work without squeaks and noises;

Flaws:

• limited model range.

Organic brake pads.

Organic brakes replaced asbestos-laced brake pads in the 1970s due to health concerns. This type of pad includes only 10-30% metal, while the rest is resin and plant fibers adapted to withstand high temperatures.

The advantages of such pads:

• They create good friction without preheating.
• Compared to other types, they stand out for their lower price.

The disadvantages include rapid wear and dust, which can obliterate the disc holes.

Bosch BP976

Like all Bosch products, brake pads guarantee quality. They provide braking power, sound insulation, reliability and durability. For production, special ceramics, organic, non-asbestos, semi-metallic and NAO materials are used. They guarantee safety and durability.

A rubber gasket with a core is installed on the pads. The slots and chamfers ensure a good fit. Designed for a relaxed driving style. Tests showed the following indicators: at a speed of 100 km/h, with cold brakes, friction coefficients are 0.48. When they were heated to 250 degrees, the coefficient decreased significantly, to 0.3. During the mountain test cycle the braking coefficient was 0.36, and during cooling it was 0.46.

Advantages:

• the pads are effective in braking on the mountain cycle;
• low level of wear;

Flaws:

• reduction in the efficiency of characteristics at elevated temperatures.

Snapshot

We take out the plug and through the window evaluate the condition of the front brake pad lining. If the lining thickness is less than 1.5 mm, the brake pads of both wheels must be replaced. The pads also need to be replaced if the linings are oily, have deep grooves and chips on them, or if the linings are detached from the base of the pads.

Attention! The brake pads of the rear wheels must be replaced as a set - all four pads. Replacing the pads of only one brake mechanism can lead to the car pulling to the side when braking.

To check the condition of the wheel cylinders and brake drums of the rear wheels, remove the drums. There should be no cracks or chips on the drums. If the working surface is severely worn, or if there are deep grooves on it, we replace the brake drum. To check the condition of the sealing cuffs of the wheel cylinder, alternately on each side we move the edge of the boot from the protrusion of the cylinder body. If there is brake fluid under the boot, indicating a faulty seal, the wheel cylinder must be replaced.

If the fluid level in the brake hydraulic reservoir is at the MAX mark, then before installing new pads, use a syringe or a rubber bulb to pump out some of the liquid from the reservoir so that when the pistons are recessed into the working cylinder of the brake mechanism, liquid does not flow out from under the reservoir cap. The parking brake lever must be lowered all the way (the car is released). Next, release the parking brake cables as much as possible.

ATE

The manufacturer Continental Teves produces front and rear ceramic pads with good braking performance, low wear resistance, disc-saving, silent, and soft braking. The products belong to the upper price category.

Test results showed that at a speed of 100 km/h, with cold brakes, friction coefficients are 0.58. When they were heated to 250 degrees, the coefficient decreased slightly, to 0.47. During the mountain test cycle the braking coefficient was 0.43, and during cooling it was 0.48. The friction coefficient turned out to be one of the highest among the pads for VAZ cars.

Products do not lose their performance qualities until maximum wear. This is achieved through the use of innovative manufacturing technologies and friction composite materials. They use non-ferrous metals (chrome, nickel, titanium), this classifies these ceramic products as “luxury”. Thanks to the large assortment, ATE products can be used in all VAZ car models.

Advantages:

• proven quality;
• wear resistance;
• stability of characteristics.

Which pads are better to put on a VAZ?

Today there are a large number of companies on the market that sell linings for classic or modern VAZ cars. The following are the 10 best companies, according to consumer reviews and sales statistics.

10th place: AvtoVAZ

The ranking opens with a domestic manufacturer supplying serial models of pads to the market.
The brand's product range includes a full range of modifications for each car. The main advantage of the products is 100% compatibility and “tailored” to the characteristics of each machine separately. Typically, pads are used in everyday use where there is no need for increased performance or durability. The products are not suitable for fans of high-speed driving - the standard material does not like overheating, which can cause brake failure.

Users install such brake pads on the VAZ 2107 and other classic-type models.

• full compatibility with car models;
• sufficient reliability;
• moderate cost;
• durable base;
• available in every store.

• do not like overheating;
• may squeak a lot;
• a lot of debris is formed;
• do not withstand aggressive use.

9th place: DAFMI

The next representative of the list of VAZ 2115 brake pads is located in Ukraine.
The Dnepropetrovsk plant is a partner of the Australian brand, which produces a wide range of parts for brake systems of imported and domestic cars. The controversial reputation of the brand imposes certain restrictions on customer demand. On the one hand, users praise the products, saying that the pads wear out for a long time and hold critical loads well. Others insist on a large number of shortcomings, pointing out strong creaking, lack of effective braking even after prolonged grinding.

I am pleased with the minimum price of the products. If you have a limited budget, you can buy brand pads and play the lottery.

• minimum price;
• wide use;
• wide selection of models.

• questionable quality;
• there is a high probability of buying a defect.

8th place: TRUCKMAN

The Russian company occupies the next position in the ranking due to sufficient quality and moderate cost.
The brand has existed for more than 20 years and supplies products to 30 countries. The company's product range includes brake pads for the VAZ 2109 and other models of the automaker. A competent approach to the arrangement of materials and technical processes during manufacturing eliminates crumbling of the linings due to overheating or shock loads. This provides the necessary durability and practicality of use.

MarKon

MarKon brake pads are considered the best in the budget price segment. The product line is extensive, with over 500 models. The manufacturer uses a soft friction mixture for the pads with more than 20 components in its composition.

The products adhere well to the discs, thereby preventing them from wearing out prematurely (although their service life is short, 20-30 thousand kilometers). Before grinding in, the pads initially make a squeaking sound, but during operation it disappears. The reason is the mismatch between the geometry of the pads and VAZ discs. When testing on dynamic stands, the friction coefficient turned out to be stable throughout all cycles (0.42-0.44).

Advantages:

• cheap price;
• efficiency;
• maintainability;
• rapid heat removal from the contact zone.

Flaws:

• needs to be changed frequently;
• insufficient strength of the material;
• gathering dust.

When to change?

Brake pads must be replaced after reaching a certain number of kilometers, but these numbers are not always standards, it all depends on driving style. Brake pads wear out much more often when driving around the city; when driving on the highway, the pads will last much longer.

Also, the front pads will have to be replaced much more often than the rear ones. This is explained by the fact that the front brakes take on most of the load.

On average, rear brake pads can travel almost 80 thousand kilometers without replacement.

The front pads must be inspected every 10-15 thousand km, and if the brake pad lining is worn down to 1.5 mm, it must be replaced without fail.