Dimensions of the VAZ-2112 trunk in centimeters

The size of the luggage compartment in the VAZ-2111

Although there are many foreign cars in fashion today, the VAZ-2111 still remains a workhorse, the advantages of which are that the car can be used in any conditions, as well as repaired with your own hands. Expensive brands of cars require ordering auto parts; often they need to wait for 2-3 months, which is extremely inconvenient - the car is idle, and the driver becomes a pedestrian.

This definitely won’t happen with the VAZ-2111 - the mechanics and manual controls allow even a beginner to quickly and easily deal with problems, because parts for the car can be bought at the first service station or a specialized auto parts store.

The luggage compartment of the VAZ-2111 has the following characteristics:

• if loaded to the ceiling, perhaps 575 liters;
• folded seat allows you to increase 1215 liters.

Now about the size of the trunk. Provision is made for the transportation of narrow cargo with a long format. The backrest of the rear seat, located in the middle, can be reclined completely, while those located on the sides recline, taking into account the smaller amplitude.

That is, the VAZ-2111 allows you to transport cargo such as pipes, skis, and a piece of linoleum up to 3 m.

What quantities may also be useful:

1. Loading height of luggage compartment.
2. The length, if we focus on the cargo loading height level, is 965 mm.

The dimensions of the luggage compartment with the rear seat folded down on the VAZ-2111 are as follows:

• the entire length of the VAZ-2111 trunk is no more than 1630 mm;
• the pitch to the rear seats is approximately 1030 mm;
• as for the width of the compartment between the wheel arches, it reaches 930 mm;
• height is also 930 mm;
• If you measure the height of the rear door opening, it is 890 mm.

If cargo is being transported, the load capacity of the VAZ-2111 is 500 mm, and when loaded it is 1030 mm.

Dimensions of the trunk of a Lada Priora station wagon

Measuring the volume of the car's trunk, you can see that it will be 444 liters, and if you fold the rear seat backs, the volume increases to 777 liters.

As for the technical side, the following characteristics can be noted in the Lada Priora station wagon:

• door opening, height – 820 millimeters;
• height from floor to roof – 845 millimeters;
• width between wheel arches – 930 millimeters;
• length with folded backs – 164 centimeters;
• full width – 150 centimeters;
• total length – 985 millimeters;
• from floor to shelf - 560 millimeters.

The rear seats of the car are secured with a mechanism that does not allow them to be completely folded into the level of the trunk floor, and the wheel arches take up space in the luggage compartment.

Modifications of VAZ-2110

Varieties of the 2110 are precisely the VAZ-2111, 2112. All of these cars have 4-cylinder, 8- and 16-valve engines. The volume of one gasoline tank is 1.5-1.6 liters. In the early 90s, cars were produced with a carburetor power system, but in the early 2000s they began to integrate fuel injection, which differs in distribution capacity, it is called an injector. The drive became front-wheel drive.

Regarding the body, there are 3 different types:

• VAZ-2110 is made in the form of a sedan;
• body 2111 is called a station wagon;
• 2112 is called a hatchback.

The difference in the 2110 modifications is significant - different bodies and engines. Everything else is very similar, so the craftsmen adjust some parts to each other if desired. The production of 2110 stopped back in 2007, but this does not prevent the produced cars from traveling around the country and beyond.

Drivers note the following advantages of the VAZ-2111:

• machine reliability;
• simplicity of design, conciseness and lack of pretentiousness;
• low cost of domestic cars.

Thanks to these characteristics, the VAZ-2111 has become a real legend. But you can only dream about the luxury of the interior - everything is simple here, just like outside, if we talk about more space in the back, then you should choose 21099.

In Russia, winters are characterized by severe frost and temperature instability; many cars take a long time to warm up before setting off, which cannot be said about the VAZ-2111. The designers made sure that even at minus 25 degrees the car would start almost immediately, even if it had been parked for several days without moving.

What you need to pay attention to is the timely filling of oil, and the oily solution should correspond to the season. The chassis is also an excellent option for Russian roads. The luggage compartment capacity is 380 liters.

Characteristics of Lada 111 engines

All engines of the Lada 2111 are located transversely. Each engine is equipped with 4 cylinders lined up in a row. The very first 71-horsepower engine has 8 valves. The main feature of the first modification is the presence of a carburetor. In all subsequent versions of the station wagon, gasoline is pumped into the engine by an injector. The maximum torque of the first VAZ 111 engine is 104 Nm. With such an engine, the car accelerates to hundreds in 14 seconds, and the top speed is 160 km/h. Gasoline consumption is: 9.1 liters per 100 km in the city, 5.6 liters on the highway, 7.7 liters in the combined cycle.

Cons of the 2111 model

Despite the fact that the car works properly even at minus 20 degrees, drivers and passengers cannot feel comfortable in severe frost, it’s all because of the stove, which is equipped in an unusual way. While the legs are freezing, the upper torso is literally burning from high temperatures, the creators clearly did not think through this subtlety.

The disadvantages of the VAZ-2111 also include the following:

1. Sound insulation leaves much to be desired.
2. Where the hood is located, the iron is unreliable, so do not be surprised if, due to frequent pressure on the hood, dented areas form when closing.
3. It’s easy to drive smoothly in a straight line, but you shouldn’t exceed the speed of 130-140 km/h, the car can lead.

If you want to improve the performance of the VAZ-2111 and modernize it, install power steering - this option is not included in the basic kit, it can be installed as an additional feature upon request, which is what service station workers do.

Reviews about VAZ-2111

Regarding the VAZ-2111, owners of domestic cars leave the following reviews:

1. I didn’t really like the car, it’s angular and dents may appear after minor impacts.
2. In general, the VAZ-2111 holds up well on the road surface, but the panel rattles. Transport for beginners, just right.
3. External luxury is not enough - add tuning, turn on your imagination and enjoy your own work of art.
4. The VAZ-2111 was the first car, so it’s difficult to forget about this car. But no matter how good a friend a domestic car is, in the end I made a choice in favor of a foreign car with good shock absorption and a smooth ride. It’s a pity that today the VAZ-2111 is no longer produced - not everyone can afford to immediately buy an expensive foreign car.
5. A good car for the money. Over 70,000 km in the city, the car showed itself to be a solid four. During this time, there were no major breakdowns, but I had to change the engine oil, gearbox oil (semi-synthetic), fluid suitable for the hydraulic booster, and filter devices about 5-6 times.

Service

Maintenance typical for cars produced by AvtoVAZ. The main maintenance operations are changing the oil and oil filter. To change the lubricant, 3.2 liters of engine oil is required. In turn, 3.5 liters of lubricant fits into the engine.

The maintenance map looks like this:

TO-1: Oil change, oil filter replacement. Carry out after the first 1000-1500 km. This stage is also called the break-in stage, since the engine elements are grinding in.

TO-2: The second maintenance is carried out after 10,000 km. So, the engine oil and filter are changed again, as well as the air filter element. At this stage, the pressure on the engine is also measured and the valves are adjusted.

TO-3: At this stage, which is performed after 20,000 km, the standard procedure for changing the oil, replacing the fuel filter, as well as diagnosing all engine systems is carried out.

TO-4: The fourth maintenance is perhaps the simplest. After 30,000 km, only the oil and oil filter element are changed.

TO-5: The fifth maintenance is like a second wind for the engine. This time a lot of things are changing. So, let's look at which elements need to be replaced in the fifth maintenance:

• Change of oil.
• Replacing the oil filter.
• Replacing the air filter.
• Replacing the fuel filter element.
• The timing belt and roller are replaced.
• Alternator belt if necessary.
• Water pump.
• Valve cover gasket.
• Other items that need to be replaced.
• Valve adjustment, which adjusts the gas distribution mechanism.

Subsequent maintenance is carried out according to the 2-5 maintenance map for the corresponding mileage.

VAZ-2111 – video test drive

This car should become an indispensable friend for those who often have to transport small quantities of cargo. The rear seats, if necessary, can be folded to create a flat horizontal floor, while the luggage compartment volume will increase to 750 liters with a permissible load of 500 kg. An additional 50 kg of cargo can be stored on the roof rack. It is possible to tow a trailer equipped with brakes weighing up to 1000 kg. The reliable body can withstand long-term use on any type of road - this is confirmed by the most severe tests in Russia. High level of comfort for cars of this type. The cabin can easily accommodate 5 people. The impeccable front and rear suspension, combined with lightweight rack-and-pinion steering and ventilated front brakes, provide enjoyable handling and precision in following your commands. All vehicles are equipped with a tilt-adjustable steering column.

Technical characteristics of VAZ-2111

Body type: 5‑door station wagon (5-seater)

Overall dimensions of VAZ-2111

Length: 4285 mm – Width: 1680 mm – Height: 1480 mm – Wheelbase: 2492 mm – Rear track: 1380 mm – Front track: 1410 mm

2111 1.5

– Engine capacity: 1499 cm3 – Power (hp/rpm): 72/5600 – Torque (Nm/rpm): 106/3400 – Acceleration time to 100 km/h: 15.5 s

2111 1.5i

– Engine capacity: 1500 cm3 – Power (hp/rpm): 76/5600 – Torque (Nm/rpm): 118/3000 – Acceleration time to 100 km/h: 15

21113 1.5i

– Engine capacity: 1500 cm3 – Power (hp/rpm): 94/5600 – Torque (Nm/rpm): 130/3600 – Acceleration time to 100 km/h: 12 s

Maximum speed of VAZ-2111

Checkpoint:

5 speed, mechanical

Trunk volume of VAZ-2111

426/1420 l. min/max

Tank volume VAZ-2111

Fuel consumption VAZ-2111

Urban cycle (l / 100 km): 9.8 – suburban cycle (l / 100 km): 6.1

Weight in running order, kg: 1055 – Gross vehicle weight, kg: 1550

VAZ-2111 tire size

175/70/R13; 175/65/R14; 195/60/R15

VAZ-2112 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ March-1 (LADA-BRONTO 1922-00) Photo Equipment

VAZ-2109 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2108 Volume of tank, trunk. Load capacity. Fuel consumption

Lada Kalina 2 hatchback Tank volume, trunk. Load capacity. Fuel consumption

VAZ-2102 Volume of tank, trunk. Load capacity. Fuel consumption

Lada Priora sedan Tank and trunk volume. Load capacity. Fuel consumption

VAZ-2101 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2105 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2110 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2121 / 2131 Niva Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2103 Volume of tank, trunk. Load capacity. Fuel consumption

Lada Vesta Tank and trunk volume. Load capacity. Fuel consumption

VAZ-2104 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2106 Volume of tank, trunk. Load capacity. Fuel consumption

VAZ-2107 Volume of tank, trunk. Load capacity. Fuel consumption

The luggage compartment of the VAZ 2111, when compared with other cars of the “ten” family, is huge, so there is room for your imagination to run wild. You can install a huge subwoofer, but not all drivers are music lovers, so let's look at other options. So, we have a soundproofed trunk of a VAZ 2111. We go to a hardware store and buy there: a couple of sheets of plywood 12 mm thick (1.5x1.5), a gray carpet with which we will cover it, and a jigsaw. First we need to cut out the floor.

Most likely the plywood will not lie perfectly flat. Therefore, we cut out rectangular pieces of plywood along the perimeter of the niche for the spare wheel and secure them with self-tapping screws to the bottom of the floor plywood so that the floor door does not fall through, but rests on these pads. In this way, we ensure that the spare wheel niche does not fall through and the floor lies flat, resting not only on the extreme points, but also on points along the perimeter of the wheel niche. We cut out all the elements from cardboard and only then transfer the templates onto plywood. We attach all the same corners to the body of the VAZ 2111, using modelling, so that there are no creaks later. then we assemble all the prepared plywood into a single structure and make sure that nothing interferes with us when closing the luggage compartment. The sheets of plywood are secured together with corners, which we first place in the cut-out recesses. Then it won’t hurt to treat the plywood with drying oil or a similar substance so that it does not absorb water.

We take a furniture stapler and tighten each element separately, securing the carpet on the back with staples. The decorated trunk of the VAZ 2111 should also perform a certain role as body rigidity. We fix a kind of spacer made of the same plywood between the left and right parts. You can also install trunk lighting there. For the side niches of the luggage compartment of the VAZ 2111, we make an indent through rectangular doors that open downwards. The spare wheel well is a composite element. A small part of the floor is used to store tools, and a large part is used for a spare tire. Such tuning of the VAZ 2111 has its disadvantages. First of all, this is weight; after tuning, the car will become heavier by about 25 kg. In addition, the free space in the trunk is reduced, there is no rigid shelf, and something like a spacer has to be constantly removed when transporting large cargo. Now the pros. It is immediately worth noting the beautiful design. Also, squeaks completely disappear, the acoustic effect improves, the level of sound insulation increases, the floor becomes more rigid, and convenient access is provided to the side niches.

Modifications and prices

Roof rack arrangement for VAZ 2111

The VAZ 2111 roof rack is installed in two cases:

• when transporting oversized cargo that does not fit even in the very capacious interior of a station wagon;
• with a banal lack of space in the trunk.

Oversized cargo, such as a bicycle, requires fastening of a special design that ensures reliable fixation of the transported object. Skis can be simply secured with standard rubber bands with hooks at the ends, which can be purchased at a car store. But, say, securing a fishing boat or a refrigerator so that it can be transported safely and without damaging the car is a whole art.

Use caution when driving with oversized cargo on the roof. It has significant windage, and controllability parameters change unpredictably.

If you systematically do not have enough space inside the body, consider purchasing a soft or hard roof box. A soft car box is simpler; when folded, it can be stored at home, but it gets dirty easily and is difficult to clean, does not have a lock, and spoils aerodynamics. A hard box looks more aesthetically pleasing, is easier to clean, and can be locked, but it is more difficult to load and difficult to store at home.

Installing the trunk on the roof rails

The VAZ 2111 is equipped with roof rails installed during assembly at the factory. These are the so-called high rails, in their upper part spaced from the roof by about 6 cm. Installing the trunk on the rails in this case is not difficult, but if these elements were integrated, a special installation kit would be required to install the trunk. Many models of roof racks are suitable for installation on high roof rails, both from foreign manufacturers - for example, Thule (Sweden) or Nord (China), and domestic ones - Omega-Favorite (manufactured by the Ant rack) or Atlant (Atlant rack). The luggage carrier is supplied with two crossbars of rectangular or aerodynamic cross-section, made of steel or aluminum alloy, and two pairs of their fastenings to the roof rails of the VAZ 2111.

Installing the trunk begins with choosing a location for the crossbars. To transport long items that protrude beyond the dimensions of the body, place the cross members as far apart as possible, and to transport compact loads, install them closer to the middle of the distance between the axles of your station wagon, approximately above the front of the rear door.

Having chosen the location for installing the crossbars, secure them to the rails with fasteners. Often this operation does not even require a wrench - the mounting screws have their own plastic flywheel and are tightened by hand.

Homemade trunk for VAZ 2111

The design is so simple that it is quite possible to make a roof rack for a VAZ 2111 with your own hands. You will need 2 pieces of steel box 20x30 mm, each 120 cm long, and 4 clamps for fastening the exhaust pipe of a GAZ 3110 car. You use the boxes as crossbars, and the clamps for attaching the crossbars to the roof rails.

Boxes of the required length can be cut with a grinder or an ordinary hacksaw. Burrs must be cleaned with a file. Just in case, the cuts at the ends of the crossbars can be wrapped with black electrical tape in several layers with some overlap, this will protect you from damage when using the trunk.

To attach to the rails perpendicular to the long side of the box profile, drill two pairs of holes in each of the crossbars with a diameter slightly larger than the diameter of the screw part of the clamps. Select installation locations for the crossbars and place them on the rails. Place the first clamp under the railing and perform the following operations:

• insert the clamp into the drilled holes,
• place a jumper
• install Grover washers,
• tighten the screws.

Do the same procedure with the other three clamps. Keep in mind that your DIY trunk is different from a professional one. The top surface of the crossbars is not flat. Eight nuts and eight ends of the screw parts of the clamps protrude from it. This is not a problem if the load that fits between the width of the nuts is being transported. Otherwise, care should be taken to ensure that the nuts do not scratch the surface of the cargo being transported.

Do not forget that your homemade trunk, like any professional one, is limited by the load-carrying capacity of the roof rails specified in the official technical documentation. It is 50 kg. Please note that long items create an additional load moment on the roof and should be transported with extreme caution.

How to install

What is the trunk volume of the Lada Kalina station wagon in liters?

To attach the trunk to a VAZ 2110 car, it is not necessary to visit a car service center. You can install the roof rack yourself. Procedure:

We install supports for further installation of transverse arches

It is important to check that the support fits onto the seal. Otherwise, there is a risk of damaging the car's paintwork. Pull out the control knob

Carefully holding the support, turn the adjuster until the structure fits tightly to the machine. Do not overdo it so as not to deform the beam. We repeat this procedure with another support. We check the geometry: it is necessary to secure the supports evenly. We monitor whether they lie tightly. We install the cross members and check the geometry again. We fix the box, mesh or other structure.

Fastening to gutters

Installing a roof rack on a VAZ 2110 using mounts for gutters is the most common type of fastener, typical mainly for domestic cars. Advantages:

• many options for trunk position;
• the ability to install several pairs of rack racks;
• the presence of a special type of luggage installations - baskets;
• versatility - suitable for almost all cars of the VAZ family.

Fastening to the doorway

Unlike the previous one, this mounting option is typical for foreign cars. But the installation of a trunk on a VAZ 2110 often occurs due to clamps behind the doorway.

The car trunk is secured thanks to profiled side bends. Fasteners are placed there, and the required level of structural stability is achieved due to the tightening device at the base of the trunk itself.

The advantages of this fastening system:

• versatility - suitable for most models;
• safety – high protection against removal.

Installation of roof rails

Most versions of car racks on the roof of a VAZ 2110 or 2112 can be installed without the use of roof rails. This design itself can play the role of a kind of trunk. Therefore, consider installing it. Before you take action, keep two things in mind:

1. It makes sense to install roof rails only if they are permanently on the roof of the car;
2. It is recommended to entrust the installation work to professionals.

If it is not possible to entrust the installation of roof rails to specialists, you can follow the instructions:

Preparation: thoroughly clean the roof from dirt, degrease the surface of the body, remove the ceiling trim in the cabin. Drilling holes in the body

It is important to clearly calculate the mounting locations for the roof rails. We prepare the reinforcing plates. Any metal will do, thickness – 2 mm

We bend the plates to the shape of the tens of ceilings and fasten them with glue. We install roof rails.

When installing, take into account:

the first load can be transported on rails within a day from the moment of installation; regularly check how tightly the roof rails fit the car body; it is important to distribute luggage evenly throughout the installation; Do not exceed the load capacity of the roof rails.

The problem of lack of trunk space in the VAZ 2110 is easily solved. The main thing is to be able to choose a universal car rack, taking into account possible factors - from the purpose and frequency of cargo transportation to the type of fasteners.

Installing a trunk on the lid of a VAZ 2112

, 2111, 2110

Of course, there is no need to explain why the car has a roof rack. This device makes it possible to increase the volume of transported cargo. For example, if you are planning an active holiday, then it is impossible to install skis or sleds in the cabin, in which case a roof rack will be useful. But, if this car trunk is heavily fixed, it can be more than just bad.

In this case, you must always correctly and securely install the roof rack on the VAZ 2112

, 2111, 2110. First you need to purchase the rack you want. When choosing a roof rack, you need to carefully calculate the weight of the cargo that will be transported

It is very important to know what is made of galvanized steel. The plastic covering can be left

There is no need to buy a trunk that is made of very soft material.

Such racks will soon lose their operational capabilities as they are thrown away. Under no circumstances can you buy these racks on assembly that you need to use some special tools

When luggage is purchased for a VAZ 2112, 2111, 2110, you need to take into account that there are no gaps on the roof for draining water, in which case it will be necessary to install a luggage rack

to the edge of the roof. First, you need to fix the two cross beams. To avoid damage to guests during installation. There is a possibility that the paint will damage the car's paint.

VAZ-2110

Putting the “tenth” family into production line production cost VAZ quite a lot of money and effort. Due to the difficult economic situation, putting the “tenth” on the assembly line took a considerable time, although, according to the designers, the “tenth” model was ready for mass production already in 1992. The decision to put it into production was made twice, but for certain reasons adjustments were made to the design, and the decision had to be postponed. The first “ten”, which was properly processed by conveyor technology, was assembled on June 27, 1995, and the first production cars began to be produced only in 1996. “Ten” was perceived precisely as the first sign of better times. At least the VAZ workers themselves thought so.

VAZ-2111

The previous modification of a similar body design – the legendary 2104 (“four”) – was already 15 years old by the time the production of 2111 began. VAZ-2111 is the first VAZ station wagon with front-wheel drive.

The trunk volume with a total vehicle load capacity of 500 kg varies from 490 to 1420 liters. This is due to the fact that the rear seats can be folded in such a way as to create a flat horizontal floor, and the backrest, if necessary, can easily be folded out in a ratio of 1:2. If there is a luggage structure, an additional 50 kg of cargo can be placed on the roof. Also, with a towbar, it is possible to tow a trailer up to 1000 kg, equipped with brakes. The car body is mounted on a supporting frame with rubber-metal elements, on which it rests at 10 points. Thanks to this solution, it was possible to reduce the level of vibration and noise in the cabin, and the body became stronger and more durable. The choice of engines for the 2111 is similar to the sedan. There is also a 21110 with an eight-valve 1500 cc engine. cm with a power of 76 l. With.; 21111 with a carburetor engine (from a VAZ-21083) with a volume of 1500 cubic meters. see and 21113 with a sixteen-valve engine with a capacity of 1600 cc. cm increased power.

There were also 3 configuration options - “standard”, “luxury” and “norm”. In 1997, together with the AVTOVAZ Research and Development Center, the DECON design group created a new comfortable SUV and called it “Tarzan”. The car is a hybrid of the body structure and frame chassis of the front-wheel drive models of the “tenth” family with transmission elements and main suspension components from the Niva (2121). Moreover, all units, except for the elongated cardan shafts and the frame itself, are serial.

Body dimensions VAZ 2111

The typical length of a VAZ 2111 car is 4285 (mm), width - 1680 (mm), height - 1480 (mm).

Factory dimensions of VAZ 2111 bodies:

VAZ 2111 (Lada 111) is a 5-door class B station wagon, which was produced by the automaker from 1998 to 2009.

Over the entire period, only one generation and 7 modifications of this model with the same body dimensions were developed and released.

Parameters of the VAZ 2111 station wagon for all modifications:

• Length: 4285 (mm);
• Width: 1680 (mm);
• Height: 1480 (mm);
• Wheelbase: 2492 (mm);
• Ground clearance: 160 (mm).

Important: the standard ground clearance (clearance) for all modifications of VAZ 2111 bodies is the same equal to 160 (mm). This parameter is measured using a tape measure and an inspection frame at three points - from the edge of the front axle, crankcase and rear axle to the supporting surface