Parameters of original wheels for Volkswagen Polo

Wheel parts of the German VW Polo car: tires, rollers, hubcaps are consumables. They wear out quickly, cannot withstand the vagaries of domestic roads, and become unusable. When purchasing new similar products, you must comply with certain requirements.

The use of products that are not sized can cause serious malfunctions in the vehicle’s chassis, steering, and contribute to the creation of an emergency situation on the road. In our review, we will tell you which wheels for the Volkswagen Polo sedan should be bought at a car store, as well as the rules for choosing tires and hubcaps for these car parts.

Wheels for Polo sedan

The original wheels for the Polo sedan (R15 or other diameter), installed on conveyors in Wolfsburg, Kaluga or any other city where the production facilities of the VAG concern are located, are also called standard ones.
The concept of “original product” means that this cast or stamped R15 wheel for the Volkswagen Polo sedan is produced by VAG or in companies that are official partners of the concern. The value of a standard disc shows that the product with exactly these characteristics is placed on the car.

This VAG model is equipped with standard wheels of the following sizes:

• 6J x 15 ET 38 Dia 57, 1 PCD 5 x 100;
• 6J x 15 ET 40 Dia 57, 1PCD 5 x 100;
• 5J x 14 ET 35 Dia 57, 1 PCD 5 x 100.

Manufacturers also allow the placement of non-standard parts on cars with the following wheel parameters for the Polo sedan:

• 7Jx16 ET46 Dia 57, 1 PCD 5 x 100;
• 7Jx17 ET46 Dia 57, 1 PCD 5 x 100;
• 6J15 ET40 Dia 57, 1 PCD 5 x 100.

Volkswagen Polo with R17 wheels

Decoding sizes

Let's decipher the wheel sizes for Volkswagen Polo sedan:

1. 6x15. The first parameter: 6, tells about the width of the disk in inches, the number 15 means its diameter.
2. Letter J – information about the design features of the sides of the product.
3. ET38. This indicator indicates the disc offset in millimeters, the distance by which it protrudes from the point of attachment to the hub.
4. Dia 57, 1 – diameter of the central hole for the hub, measured in millimeters.
5. PCD 5x100. This parameter indicates that the Volkswagen Polo R16 or R15 wheel has five through holes for fastening wheel bolts. The number 100 indicates the diameter at which they are placed.

Also in the marking there is a designation of the diameter and thread pitch. For Polo this figure is M14x1.5.

P15 wheels for Polo sedan

Types of products

Let's consider what wheels for the Polo sedan (R15, as well as other diameters) can be offered by store sellers.

• Steel rollers, or as they are called, stamped wheels on the Volkswagen Polo sedan R15 , attract the attention of buyers with their budget cost and material strength, but do not please them with their appearance and heavy weight. Another disadvantage of the parts is the tendency for corrosion spots to appear on their surface. If damaged, a steel roller can be straightened and small cracks repaired by welding.
• Alloy wheels for the Volkswagen Polo sedan R15 stand out from stamping with their spectacular design and light weight. The presence of free space between the fragments of the part contributes to better cooling of the brake system components. However, such products are not without drawbacks. Light alloy wheels can crack if subjected to a strong impact, and their integrity cannot be restored.
• They also produce forged wheels for the Polo sedan (R16, R15). They are durable, look great, but for such advantages of the product the car enthusiast will have to pay a decent amount of money.

Alloy wheels R15 for a Volkswagen Polo sedan will cost from 2.5 thousand rubles. Stamped products are cheaper: from 900 rubles. a piece. For a forged skating rink, sellers can charge several tens of thousands of rubles.

Different types of wheels for Polo sedan

What tires and wheels should you choose for the Polo liftback?

This review will be useful to everyone from our garage fraternity, who for the first time will be faced with the problem of choosing which tires and wheels to install for summer and which for winter driving on the Polo Liftback?

It is obvious that such a model of the famous concern as the Polo Liftback was created taking into account the national characteristics of Russian roads, however, experienced motorists, unlike beginners, understand the importance of timely seasonal replacement, as well as replacement due to worn tires.

Which tires to choose for Polo Liftback?

The approximate service life of high-quality tires, subject to regular maintenance with diagnostics of the suspension condition, is a mileage in the range of 50-60 thousand km. At the same time, tire wear largely depends not only on its quality, but also on the quality of the road surface.

If the best quality tire products can still be selected with the help of recommendations from colleagues in the garage and from reviews on the Internet, then road infrastructure, which historically since the time of Radishchev has been a real Russian problem. And our brother, the car enthusiast, is forced to accept this misfortune as it is.

So, in order to choose high-quality tires for the Volkswagen Polo Liftback, you should take into account the following parameters, or rather, observing the following conditions:

• corresponding to the original tire size. It is advisable to choose the sizes recommended for tires by the manufacturer. For example, the Volkswagen Liftback concern installs either 14 or 15 inch tires from the factory. The manufacturer allows the possibility of installing both 16 and 17 inch tires, taking into account the fact that the radius of the wheel arches allows this. However, when installing such tires, the owner of a Polo Liftback risks losing the manufacturer's warranty;
• based on seasonality and climatic characteristics of tire operation;
• the degree of loading of the car or the ability of the rubber to bear loads, both the weight of the car itself and the cargo transported with its help;
• elasticity or, in other words, absorption of deformations that are transmitted from road irregularities to the body;
• counteracting the forces that act on the rubber, both during braking and when entering and exiting turns.

Thus, tires intended for Volkswagen Liftback, as for 14-inch tires, are 175/70/R14 . and if anyone prefers larger tires, then you need to take 185/60/R15 . Moreover, these tires are recommended by the factory for wheels made by stamping.

As for alloy wheels, the appropriate tires are recommended for them - 175/60/R14 , as well as 195/55/R15 .

The choice of tires for the Polo Liftback depending on the season

What do our experienced garage comrades recommend regarding the choice of summer tires? And the fact that wide tires are preferable for driving in warm weather. The fact is that despite the fact that wide tires create additional rolling resistance, they nevertheless have better grip parameters on the road surface.

Regarding winter tires, the paradox is that they have absolutely opposite requirements compared to summer “shoes”. For winter driving, the parameters of the specific pressure on the road at the point where the rubber contacts it are important. This increases the tread's grip on snowy or icy roads.

Thus, it turns out that narrow winter tires are most suitable for driving in cold weather.

For those from our garage community who are beginners, as well as for those who have seen a lot in their road life, the checklist below with information on how the numbering of passenger tires is deciphered will be useful:

In addition to the quality and originality of the rubber, tire pressure is of great importance for safe driving. This parameter is so important for safety that manufacturers, including the Polo Liftback, are forced to place a reminder about this on one of the most important automotive locations, namely on the gas tank flap.

So, for the front tires, the optimal pressure is in the range of 2.0-2.2, and as for the rear tires, it is 1.8 - 1.9 atmospheres. In cases where the Polo Liftback is fully loaded, the tire pressure is increased by 10-15 percent.

Selecting wheels for Polo Liftback

Anticipating unnecessary disputes among our garage community about rims for certain Polo Liftback tires, knowledgeable people collected and posted in the topic:

• original wheels for Polo (regardless of body type) - must have a 5*10 drill;
• with the diameter of the hole for the hub, in mm – 57.1;
• Trend type tires with dimension 175/70/R14 – these are stamped (or steel, as someone likes to call them) 5Jx14 (ET35) wheels;
• Comfort tires with parameters 185/60/R15 - steel rollers such as 6Jx15(ET38) ;
• Highm tires with a size of 195/55/R15 - mainly 6Jx15 (ET40) wheels.

Well, it would be wrong not to place at the end of the review a checklist for deciphering disk markings:

Wheels for different versions of Volkswagen Polo

Various modifications of the Volkswagen Polo have their own sizes and characteristics. This applies not only to the specific model, but even to the year of manufacture. Manufacturers are trying to create the most favorable conditions for movement.

So, a liter Polo requires the installation of 13*4.0 wheels until 1994, after which 13*5.0 were installed. This made it possible to slightly reduce the disc offset from 38 to 35. This decision and the use of a certain tire size also had an impact. The rims on cars with a 1.2 engine remained virtually unchanged: 14*5.0 (6.0) or 15*6.0.

The FSI model with a 1.4-liter engine produced in 2007 requires the mandatory installation of 14*5.0 or 14*6.0 wheels. This also affects its offset and allows the use of completely different tires.

This suggests that not every Volkswagen Polo model can use the same wheel parameters. This issue should be approached with all responsibility, so as not to worry while driving on the roads.

When installing discs (casting) on ​​the Trend version, you should use 5J*14 discs, which have an offset of 35. The Comfort version provides 6J*15, which has an offset corresponding to 38 mm.

Volkswagen Polo sedan what tire pressure should be

Reading time: 5 minutes

Correct tire pressure is an important aspect of driving safely. But many car enthusiasts, especially beginners, often do not pay much attention to this. Some people don’t even know exactly what the optimal atmospheric conditions should be for their own car. And this is very bad, since such indications must be constantly and systematically monitored.

Particular attention should be paid to checking the parameters before a long trip, as this may affect safety. This procedure is done using a pressure gauge, but there are also more advanced systems that automatically take measurements and transmit all the results to the display of the car owner.

Tire pressure in Volkswagen

Many car enthusiasts nowadays prefer Volkswagen cars, as they are distinguished by their elegant shape and convenience. Each individual car has its own indicators regarding the optimal tire pressure. Moreover, the performance in the front and rear tires may differ.

Each car manufacturer leaves certain recommendations on acceptable standards. These clues can be located on the gas filler door, on the driver's door, or on the glove compartment lid. They must be carefully read and adhered to.

If you do not adhere to the recommended standards, this can lead to:

• rapid wear of rubber;
• poor wheel grip;
• exiting the standing chassis of the car;
• erasing protectors;
• deterioration of vehicle controllability;
• increased fuel consumption.

It is especially scary to have inappropriate tire atmospheres in the winter. It is very easy to lose control on slippery surfaces, so a timely check can even save your life.

Also, do not forget that tire pressure indicators change in winter and summer. In summer they increase due to heat, and in winter they decrease due to cold. Therefore, you need to check it at least once a week.

Tire pressure for Volkswagen Polo and Touareg

The correct amount of atmospheres for a minimum vehicle load is 2 atmospheres on the front axle tires and 1.8 on the rear. That is, if only the driver without passengers constantly travels in the car, then such indicators are optimal for the Polo model.

But if the car is designed for travel by a large family, then the tires need to be pumped according to other parameters. In this case, there should be 2.4 atmospheres on the front axle, and 2.6 on the rear axle. In winter, the pressure decreases in any case, so it needs to be checked more often.

And special attention should be paid to the same indicators in the front and rear tires. Different pressures in them will lead to loss of control over the car, the wheels will literally go sideways. The car will be pulled from side to side and it will be very difficult to control.

In Touareg cars, the tire pressure is slightly different from the above-mentioned model. Such cars weigh more, so the atmosphere indicators in the tire increase. At minimum load, the pressure in all four tires should be 2.5 atmospheres.

What kind of wheels are there for Volkswagen Polo sedan?

In order for the car to behave well on the road, the rims on the Polo must fully comply with the characteristics of the vehicle’s suspension. Car wheels for this car make are divided into two main groups:

Volkswagen Polo sedan

• light alloys, which can be cast or forged;
• steel.

As for steel structures, for their manufacture they use sheet steel, from which two parts are welded by stamping - the rim and the plate. The main disadvantages of the designs include poor corrosion resistance, unpresentable appearance, and poor balancing due to the fact that inaccuracies are often made during the manufacturing process.

Note!

Steel rims on VW Polo are heavier than alloy wheels. Due to this, a deterioration in the performance of the vehicle is often observed.

In the manufacturing process of cast components, light magnesium and aluminum alloys are used. These designs are lightweight, which has a positive effect on the functionality of the suspension around its unsprung mass. The handling of a Volkswagen, as well as the sensitivity of its suspension to potholes and bumps on the road, directly depend on the unsprung mass.

The main advantages of cast wheels include:

• high resistance to corrosion, which forms on the top of the discs due to the aluminum dioxide film;
• presentable appearance, so the driver does not need to install additional caps;
• high precision in the manufacturing process, which contributes to a good level of balancing;
• small mass;
• good ventilation, due to which the brake discs on the Volkswagen Polo are constantly cooled.

The disadvantages of cast structures are their high cost and fragility, which is caused by the granular structure of the material used.

The best winter studded tires for a Volkswagen Polo

The best tire models presented are distinguished by reliable studs, an effective drainage system, and the ability to move equally confidently on snow, ice, and asphalt roads.

The cost of these models makes them accessible to car enthusiasts with different financial capabilities.

Continental IceContact 2

Description of the tire. The model is designed for use in snowy, cold winter conditions.

The asymmetrical tread pattern allows the car to feel confident on roads with any surface.

The increased number of rows of studs improves traction on icy sections of the road. A large number of multi-directional lamellas help the studs enhance their grip.

The stud installation area is equipped with sharp-edged recesses that crush ice, freeing the carbide tip of the stud from clogging.

Innovative technology for installing studs in the compound prevents their premature flight.

The original proportions of the rubber mixture enable the model to perform its job equally well in severe frosts and at above-zero temperatures.

Pros of Continental IceContact 2

1. The spikes last a long time.
2. Prompt response to steering action.
3. Confident behavior on the ice.
4. Passable tires.
5. High quality material.

Cons of Continental IceContact 2

1. High price.

You have to pay for road safety, according to its owners. Therefore, the cost of the model is fully justified by its quality.

Viatti Brina Nordico V-522

Description of the tire. A model with an asymmetrical pattern, in which the studs are installed in the outer tread blocks.

The wide area of ​​the edge zones allows the car to maintain stability during maneuvers and turns.

The wavy lamellas of the contact blocks, together with the studs, are responsible for the quality of traction between the wheel and the road.

The presence of a large number of drainage channels allows you to avoid the phenomena of slashplanning and aquaplaning.

Massive checkers of the edge zones enable the car to clear away snow drifts on the highway.

Pros of Viatti Brina Nordico V-522

1. Confident movement on water and slushy snow.
2. Excellent ride quality.
3. High reliability on snow, ice, asphalt.
4. Reliable installation of studs.

Cons of Viatti Brina Nordico V-522

1. Noisy tires.

The owners liked the model. To improve its performance and reduce noise levels, they recommend running it in.

Sailun Ice Blazer WST3

Description of the tire. An inexpensive model from a Chinese company with a symmetrical directional pattern.

This studded tire has increased cross-country ability and excellent grip properties.

The presence of numerous lamellas and grooves with sharp upper edges ensures reliable contact with the road surface.

Eight rows of studs with carbide tips make it safe to drive on icy roads.

A large number of drainage slots quickly drain the contact area between the tire and the road surface.

Pros of Sailun Ice Blazer WST3

1. High quality stud material.
2. Interesting drawing.
3. Confident grip on the road on ice, snow, slush.
4. Safe braking.
5. Pleasant price for the buyer.

Cons of Sailun Ice Blazer WST3

1. Increased noise.

Owners of this tire model from China indicate that it is a worthy competitor to rubber from famous brands.

Standard wheels

In the standard version, the Volkswagen Polo sedan is equipped with “stampings” 5J-14, as well as 6J-15. In this case, 5 and 6 are the rim width, which is measured in inches on alloy wheels, J is the rim flange profile shape, and 14 and 15 are the rim diameter.

If you take a Polo in a Highline sedan body, it is marked with wheels 6J*15 ET 40 PCD 5*100. The correct location of the bolts is very important here, the distance between which must be maintained strictly at 100 mm. Disc offset (ET) is the distance to the plane of symmetry of the rim from its direct mounting. The unit of measurement used is millimeter. This is all provided for light alloy wheels.

The Volkswagen Polo is produced from the factory with an offset of 35 to 40 mm. In this case, the bolts are always located at a distance of 100 mm and are screwed in in the amount of 5 pieces.

The standard wheels will differ from each other in terms of bodywork. The parameters will be as follows:

• GF-6NAHW. All versions of the car produced in 2000 are equipped with wheels measuring 14*6.0 or 15*6.0. For this reason, the offset of the disk 43 and 45, respectively, will differ, which indicates the impossibility of using identical disks on different vehicles.
• ABA-9NBUD. If you take a car made in 1996, the wheels are 13*5.5 with an offset of 43. In 2007, 14*6.0 with a similar offset were installed on the car.
• GH-9NBBY. Wheel samples changed almost every year, as not only the size was adjusted from 14 to 16, but also the rim width from 6.0 to 6.5. But the offset and drilling remained unchanged.
• GH-9NBKY. In 2004-2007, the disks did not change and remained the same, namely 14 * 6.0. The only thing that is different is for the 2006 model. a rim diameter of 15 could be used, with all other identical parameters.

They use 5*100 drill bits almost everywhere. The only exception is the 2000 model GF-6NAHW body, which uses 4*100.

Engineers at the German car manufacturer do not rule out installing wheels with a diameter of R16 instead of standard ones. This is more focused on tuning and more on classic performance. But if the vehicle is purchased from a showroom, you can immediately forget about warranty service related to the chassis. That is, only the owner should decide this. This is called an experiment attempt, for which no one bears responsibility.

What alloy wheels are suitable for the Volkswagen Polo sedan

The modern market offers drivers a large selection of vehicle components; they differ in various modifications, service life and weight. From the point of view of design and quality characteristics, it is better to choose alloy wheels.

Cast wheel

When choosing such designs for a car, it is necessary to take into account the size of the disks and the diameter of the hub. If you do not take into account the diameter of the hub, the auto disk will fit on the support or dangle, which can lead to an accident. As for the number of bolts, this point needs to be given special attention, since the fasteners (or rather, their number and diameter) must completely match. The disc offset value for Volkswagen Polo should be ET40.

Important!

The use of other modifications may cause damage to the suspension, since the Polo does not respond well to other loads.

The Volkswagen Polo sedan has been extremely popular for decades, but as for the variety of wheels, it is not very large. Today, there are several wheel modifications that are preferred by most drivers:

• 6Jx15 ET40 are lightweight alloy designs with a diameter of 15 inches. The main advantage of the discs is the standard bolt pattern. As for the tires, its parameters are 190/50/R 15.
• 5Jx14 ET35. For the manufacture of these car wheels, special steel and a stamping method are used, during which the structure is attached to the frame with five bolt fasteners.
• 6Jx15 ET38 - stamped steel wheels that reach 20 inches in diameter. The bolt pattern completely matches the 5Jx14 ET35 modification.

Model 6Jx15 ET38

Buying wheels for a Volkswagen Polo sedan does not present any difficulties even for those drivers who have no driving experience. The only thing that matters here is the size, according to which you can easily select tires.

Selection of tires to match the wheel size of a Volkswagen Polo car

When installed on a Volkswagen Polo, the manufacturer of 14-inch “stampings” recommends 175/70/R 14 tires. For the second option, 185/60/R 15 is suitable, and for light alloy wheels – 185/60/R 15 and 195/55 /R 15. Other important wheel indicators that may be needed when choosing tires can be found in the technical documentation.

Tire 195/55/R 15

For those who are choosing tires for the Volkswagen Polo for the first time, it’s best to first familiarize yourself with the designations on the tire. There's nothing complicated about it. In addition to the digital designations of tire sizes, the marking may also contain letters indicating the maximum safe speed for a given tire.

IMPORTANT! Exceeding speed limits is DANGEROUS! Most accidents and accidents involve violation of tire speed limits.

Tires

Varieties

The tires on the Polo Sedan R15 are responsible for the comfortable movement of the car on the roads. Based on weather conditions, summer or winter tires are installed on the car, as well as all-season tires.

• Summer tires, unlike winter tires on a 15-diameter Volkswagen Polo sedan, are less noisy when driving and have a more straightforward tread pattern. They have excellent speed characteristics.
• What winter tires to put on a Volkswagen Polo sedan is decided by the owner of the German car himself. It all depends on the operating conditions of the vehicle. For driving on city streets at temperatures around zero degrees, European tires are suitable. The tread of such tires is distinguished by the presence of a large number of sipes necessary to drain slurry or water. They may have spikes for driving on slippery roads.

The Scandinavian type of winter tires for Volkswagen Polo sedan in sizes R15, R16, R17 is characterized by a soft compound, rubber material, and a large number of deep channels. The presence of pronounced zones, or spots as they are called, on the tread ensures reliable grip on the road surface. Such tires are used at low temperatures in northern regions with abundant snow cover.

Universal rubber is used year-round, but its use is limited by temperature: from -5 to +10 degrees.

In cold weather, the use of all-season tires on VW Polo is prohibited: the rubber hardens, which can lead to unpredictable situations on the road. In hot weather, it also loses its performance characteristics and wears out quickly.

Winter tires for Volkswagen Polo sedan

Tire sizes

The table shows what tire sizes for the Volkswagen Polo sedan should be installed on cars with different power units.

The T speed index means that this tire size for the VW Polo sedan can be used when driving up to 190 km/h. A coefficient of 85 and 84 shows that the tire can withstand a load of 515 and 500 kg, respectively.

In addition to the indicated values, there are also options for tire sizes, the use of which will not lead to disruption of the vehicle, for example, 195 by 65 for the Polo sedan.

Polo sedan on summer tires

Marking

Let's talk about tire markings for VW Polo. Let's take size 185/60R15 as an example:

• the first digit 185 indicates the profile width in mm;
• indicator 60 means the profile height of the tire as a percentage of the width;
• the letter R means the type of tire - radial, and not radius, as novice car enthusiasts think;
• The number 15 means the tire diameter in inches.

Manufacturers allow the installation of larger diameter tires during the summer season for tuning: R16, R17. It will help increase ground clearance and make the car's exterior more attractive. However, the standard tire size on the Volkswagen Polo sedan is 15 inches in diameter.

The cost of tires from little-known brands starts from 3 thousand rubles. Tires from famous manufacturers will cost the buyer 5-8 thousand rubles.

Tire markings for Polo sedan

Choosing tires for a Volkswagen Polo depending on the time of year

The choice of tires for your car is significantly influenced by the time of year. In summer, it is better to give preference to wider tires. The wider the rubber, the better the grip, although the rolling resistance increases.

Regarding winter tires, for better traction, the specific pressure at the point of traction with the road should be as high as possible. In this regard, traction on snowy and icy surfaces improves. This means that the ideal option for city conditions is narrow winter tires.

Winter narrow tires

The manufacturer's engineers do not recommend installing winter tires size 185/60 on 15-inch wheels, since the running properties of winter tires of this size are far from ideal.

Volkswagen Polo manufacturers allow the installation of tires of size R 16, but these actions are not guaranteed. When deciding to install such tires, you can forget about the warranty and take full responsibility for the handling of the car.

IMPORTANT! Before agreeing to car tuning and changing the tire size on a Volkswagen Polo, you should think about the possible consequences.

According to reviews from Volkswagen Polo car owners, larger wheels can be installed on the car. Tires 215/45R 17 have proven themselves well. But before installation, you should weigh the pros and cons, listening to the advice of experts.

What wheels are suitable for the Volkswagen Polo sedan, how to choose wheels and tires

The automaker installs three types of wheels on Volkswagen Polo sedan cars: 14" and 15" stamped wheels with a cap, as well as 15" alloy wheels.

Steel wheels come complete with decorative caps

Alloy wheels are included in the top-of-the-line Highline package. They come with tires in sizes 195/55 R15 and 185/60 R15. Steel wheels 6Jx15 ET38 are included in the Comfortline car kit and are mounted together with 185/60 R15 tires. Wheels from Highline are also suitable for this modification. The budget Polo Trendline series can only boast steel wheels with a diameter of 14 inches and 175/70 R14 wheels.

For cars manufactured before 2015, the following alloy wheels manufactured by VAG are suitable:

• 6RU6010258Z8–6Jx15H2 ET 40 Riverside, price - from 13,700 rub. and higher;
• 6R0601025BD8Z8 – 6Jx15H2 ET 40 Estrada, cost - from 13,650 rubles;
• 6R0601025AK8Z8 – 6Jx15H2 ET 40 Spokane, price - from 13,800 rubles;
• 6C0601025F88Z–6Jx15H2 ET 40 Novara, cost - from 11 thousand rubles.

The first code in the list is the catalog number. If the Polo sedan was released after 2015, you can add the following to the above disks:

• 6C06010258Z8–6Jx15H2 ET 40 Tosa, from 12,600 rubles and more;
• 6C0601025LFZZ–6Jx15H2 ET 40 5/100 Linas, minimum price - 12,500 rub.

For winter use, the automaker recommends 5Jx14 ET 35 wheels with 175/70 R14 tires.

Selection of non-original wheels

There are many discs from third-party manufacturers offered on the Russian market. For example, Russian-made 5Jx14 ET35 alloy wheels can be purchased at a price of 2,800 rubles per piece. Standard size 6Jx15 H2 ET 40, manufactured in Russia, will cost a little more, from 3300 rubles.

Those car owners who want to change the appearance of their car purchase alloy wheels with wider rims, up to 7 inches wide. The rim diameter can also be increased to 17 inches, but then you will have to select low-profile tires for it. The bolt pattern should remain the same - 5/100 or 5×100. The diameter of the center hole DIA should match the original (57.1 mm) or be slightly larger, but complete with installation rings that will help eliminate the difference in the diameter of the hub and the disc mounting hole.

It is better not to use an offset size of more than 40, although discs with a larger value are also suitable. The automaker recommends not doing this, since the load on the chassis will change and the car will also behave differently. With a larger offset, the tires will be positioned deeper and the wheel track will become smaller. There is a danger that when turning, the rubber will come into contact with the front fender liners. With a smaller offset, the tires will move outward. With such changes, you need to carefully select tire sizes.

Non-original wheels made in China are cheaper, but lose their appearance faster and are less durable

The choice of car tires on the market is huge. There are Russian and foreign-made skates that differ significantly in quality, mileage and cost. For safe driving, every Russian car owner must have two sets - summer and winter tires.

If you want to buy summer tires for 14- or 15-inch wheels that will fit the Volkswagen Polo sedan, you can choose from many offers. The price starts, on average, from 3 thousand rubles per piece. The more famous the manufacturer, the higher the cost. For example, prices for Bridgestone tires of various brands start at 4,500 rubles. Winter tires are sold in the same price range.

The price range of Michelin tires starts from 5,300 rubles

Video: how to choose wheels for a car

https://youtube.com/watch?v=dTVPAYWyfvg

Video: criteria for choosing summer tires for a car

https://youtube.com/watch?v=6lQufRWMN9g

Video: choosing winter tires for your car

https://youtube.com/watch?v=JDGAyfEh2go

Reviews from car owners about some brands of tires and wheels

Volkswagen tire pressure, tire sizes for different VW models

Volkswagen is a German brand that produces reliable and comfortable cars. When developing each model, the manufacturer takes into account everything, including the tire size. Therefore, when choosing them, it is necessary to give preference to the optimal options to achieve comfortable and safe driving.

What tire size is needed for a Volkswagen Polo?

The Volkswagen Polo passenger car is available in Sedan and Hatchback body styles. When purchased, it comes with the correct size tires. In the future, when you need to replace them, you can look at the required parameters on the profile and purchase the same tires. But what should you do if the car was not bought new and does not have factory wheels?

The manufacturer recommends installing wheels of 14 or 15 diameters on the VW Polo series. If 14 rims are installed, it is recommended to install tires with a dimension of 175/70.

For wheels with a diameter of 15, it is best to install tires of 185/60, and in some cases - 195/55. Dimensions are indicated in millimeters. The first number is the width of the tires, and the second is the profile height.

These are only recommended settings and may differ from actual settings. For the summer period, you can choose wider tires for improved grip, and in winter you can choose narrow ones, as they are more resistant to the effect of aquaplaning.

The pressure should be selected based on the recommendations indicated on the gas tank cap. However, with low pressure, tread wear on the sidewalls will increase, the car will not be as stable, and gas mileage will increase.

If the pressure is too high, traction and directional stability will significantly deteriorate, and comfort will also be impaired, since bumps on the road will be felt more strongly.

What tire size is needed for Volkswagen Passat

The Volkswagen Passat is also a passenger car, but its weight and other parameters differ from the Polo. Therefore, different tires are needed here.

The factory also installs 14 and 15 inch wheels on this model. However, there are more tire sizes.

It is optimal to install 175/70, 185/65, 195/60 tires on 14-inch wheels. The most comfortable ride will be with a dimension of 195/60, but for maximum traction 175/70 is recommended.

• 15-inch wheels are installed by the manufacturer together with tires of the following dimensions:
• As in the previous version, the most comfortable ride will be with 205/50 tires.
• However, in this case, when driving over uneven surfaces, there is a risk that the wheel will touch the wheel arch liners and create an unpleasant sound, and tire wear will be higher.

Mounting bolts

The fit of the bolts used on standard discs is spherical. They should be of the following type:

• Bolt cap for fixing the wheel – 3СО 601 173.
• Wheel security bolts included M14X1.5x27.5, 1KO 698 137A.
• WHT 001 812 is available for a single bolt of this size.

The correct bolt pattern guarantees a high-quality and long-lasting ride without consequences. You should be careful here, especially when installing non-standard wheels.

Wheel caps for Volkswagen Polo sedan

hubcaps for Volkswagen Polo are installed on stamped wheels. They hide the not entirely attractive appearance of steel rollers, protect the hub and other suspension parts from dirt, chemicals and water.

These products can be open or closed. The first type looks impressive on the car and promotes better ventilation of the brake system parts. The second ones interfere with airflow, but better protect the mechanisms from contamination.

• Caps for Polo sedan 15 can be attached using latches. This option does not require much time to install on all wheels. However, when driving on uneven surfaces or hitting curbs, they may fly out or break.
• There are wheel caps for the original Volkswagen Polo Sedan R15, which are attached through through holes along with the rims. This installation method is more practical.

You need to buy such products according to tire size. The cost of the product starts from 800 rubles for a simple set. A more attractive option will cost 2.5-3 thousand rubles. for 4 pieces.

To avoid premature wear or damage to all components of the Volkswagen Polo sedan wheels, you must adhere to a calm driving style. You should also try to drive carefully on our not very good roads. This will save you money from buying new tires or wheels.

Problems when replacing wheels on a Volkswagen Polo - the topic of the video below:

This video will teach you how to properly remove and install wheel covers:

How to protect Volkswagen Polo wheels from theft

Not every car owner can keep his car in a garage or in a paid parking lot. Most residents of large cities are forced to leave their cars in unguarded places - in parking lots near their houses. Unfortunately, such vehicles are most at risk of theft or robbery. One effective way to protect your wheels from theft is to purchase security bolts.

Some secrets are sold together with plugs, which are difficult to remove without a special tool.

It is best to buy secrets of a complex shape that can be completely or partially drowned in a cast disk. It will be difficult to get to such a secret bolt with a key or chisel. Original security bolts, produced by VAG, with catalog number 5Q0698137, cost from 2,300 rubles. They fit all original wheels - both stamped and cast. Locks made in Germany by McGard, Heyner and ADL have proven themselves well.

Volkswagen Polo car owners, having read the above information, can choose the wheels and tires for their cars themselves. Among the huge number of offers, you should not pay attention to cheap products, since their quality and service life leave much to be desired. Properly selected, high-quality wheels determine not only the ride comfort, but also the controllability and safety of the vehicle in difficult weather conditions.

Recommendations for selecting wheel sizes for Volkswagen Polo

Many Volkswagen car owners often face difficult choices when purchasing new wheels. A Volkswagen Polo driver will not regret the purchase if he listens to the following expert advice:

• Volkswagen has a representative office in Russia and, accordingly, an official website in Russian. This way you can see all the technical specifications for your car.
• If we are talking about replacing rims, then the car owner can use any parameters for his model that are recommended by the factory. If the driver is the owner of a 2001 VW Polo MK3, he can choose wheels with a range of dimensions 4.5J-6J x 13-15 ET 35-43, PCD 4×100, DIA 57.1. These parameters will suit him in any case, since they were once installed as standard at the factory.
• One of the surest ways to select the necessary wheels will be to contact the showrooms of official dealers of the VW brand, since any service manager will be able to determine the required size from the database, and then help purchase the original product of interest, and if it is not available, place an order at the factory.

You may be interested in Chinese tires for trucks

Tires for Volkswagen Polo latest, 6th generation

• Large retail outlets have special software that is integrated with the warehouse accounting system. By contacting the seller, the driver can provide the necessary data about his car - make, model, equipment, year of manufacture, etc., and the system will automatically show the entire range of wheels and tires recommended by the manufacturer for a particular vehicle.

Important!

All professionals, without exception, advise purchasing only original wheels or their analogues with the same dimensional parameters from well-known suppliers. If you buy cheap replicas from little-known factories, no one can guarantee the safety of the wheels, hubs, bearings, suspension, steering rod and driver’s health in the event of an emergency on the road.

Basic sizes of original wheels for Volkswagen Polo sedan

A tire is placed on the rim of the wheel, so its width must be equal to the profile of the structure. When studying the proportionality of wheels and tires, you need to pay attention to such key points as fitment and individual recommendations from the car manufacturer.

Fitting, or studying the fit of the tires and checking the position of the wheels relative to the suspension, should only be carried out with negative camber, low seating or other tuning features.

Today, there are 3 basic sizes of original Woodstock wheels for the Volkswagen Polo sedan, the characteristics of which are presented below:

• Wheels for VW Polo Sedan R16 - the recommended wheel size or rim width is 8 inches, the minimum and maximum values ​​are 7.5 and 9 inches, respectively.
• R17 - the recommended disc size or rim width is 11.5 inches, the minimum and maximum values ​​are 11 and 13 inches, respectively.
• R18 - the recommended disc size or rim width is 12 inches, the minimum and maximum values ​​are 11 and 13 inches, respectively.

Beginning motorists are advised to give preference to factory-made designs, since compared to non-original wheels, they improve road safety, the vehicle chassis does not break down longer, and handling characteristics do not deteriorate.

How to determine wheel size

Kan-bus connection

Unfortunately, the Volkswagen Polo does not provide for the installation of pressure sensors, however, you can do something similar yourself - install a Kahn tire on the car. This know-how appeared not so long ago, but has already conquered world markets. This device allows you to connect a more modern radio and display a number of vehicle operating parameters on the screen, such as battery charge, temperature, fuel volume in the gas tank, tire pressure, etc. Using the Kan tire, you can control the pressure, both in summer and winter tires for the car.

The choice of which tires to install on a Volkswagen Polo sedan or hatchback is yours. The trading network and online stores offer a wide range of winter and summer tires from various manufacturers, different in size, quality and price range. It is best to follow the manufacturer's recommendations - this will ensure high tire performance in various weather conditions and complete safety.

Disc selection

There is a huge range of wheels on the market that can be easily installed on a Volkswagen Polo car. They can be made of steel or casting. The dimensions are also different, which will fully depend on the car model, year of manufacture and other parameters.

Much will depend on the manufacturers, who have a slightly different approach to the process of creating wheels for cars, which affects the quality and duration of the operating period. Among them, the most popular manufacturers are:

• K&K. Most often, original discs of high quality are offered. Presented in a classic silver color, size p15*J6 ET 40. Russian production is also pleasant in price. The cost of one disc is approximately 3,500 - 4,000 rubles.
• Alutec.
• Le Mans.
• Milan.
• Sakura.

This all applies to the creators of alloy wheels, which bring great attractiveness to vehicles. But as mentioned earlier, you should not experiment, especially if you own a car from a dealership that is covered by warranty. The manufacturer Wolf has the best quality. But here it offers consumers even a diameter of R17 with J7.5. The price will vary between 5,000 – 6,000 rubles, depending on the place of purchase.

Cheaper options on the market are brands for the Volkswagen Polo sedan such as Akula, M33, CR-06, Kyoto, the cost of which starts from 2,500 - 3,000 rubles.

There is a purchase option for installing conventional “stampings”, the cost of which ranges from 1,000 – 1,500 rubles. Article numbers AR075, 7280T, X40028 and other options are usually used. Much depends on the diameter of the stamped disc and its other parameters, which are shown in the photo.

How to choose the correct rim diameter for a VW Polo

To correctly select a particular model or replica wheel for your car, you need to find out the diameter and width of the disk, and then clarify where the mounting holes are located and in what quantity. Then you need to determine the offset indicator and the diameter of the Volkswagen hub, for which it is advisable to study the manufacturer’s catalog or measure everything yourself, using a special tool.

Note!

If a driver feels unsure about the responsible choice of cast, forged or stamped wheels for a vehicle, it is imperative to consult with an experienced specialist who will determine all the necessary parameters and dimensions.

As for the radius of the disk, it must be selected in full accordance with the recommendations of the machine manufacturer, and it must also coincide with the mounting diameter of the wheel. Today there are many extreme drivers who increase the mounting diameter by rolling the inch fit. For example, a 16-inch seat can be converted to fit an 18-inch wheel.

Special attention should be paid to the wheel offset, which is the distance between the longitudinal plane of the rim and the mounting plane of the disk. The wheel offset value can be negative, positive or zero.

Wheel offset values

It is advisable to approach the purchase of original wheel components for a vehicle with all responsibility, since any mistake can lead to accidents on the road. It is strictly forbidden to deviate from the standard values ​​and parameters set by the manufacturer, because you can cause harm not only to the car, but also to your health.

Non-standard disk parameters

You can do without standard wheels for the 2017 Volkswagen Polo. There are several options for replacement, which at the same time remain perfectly replaceable. The main thing is that the original bolts match the purchase exactly. Sometimes it happens that they are screwed into standard discs by 7-8 turns, but into new ones - only by 5-6 or something else. This indicates the need to look for another option or select a landing site. Sometimes even 28mm long cone bolts will come in handy.

It is best to choose from the ranges from 5J to 7J, having a radius from R14 and up to R17. Some craftsmen try to take even larger centimeters, which can lead to damage.

If the central hole of the disk differs from the classic 57.1 mm, special spacer rings should be used.

As for departure, in addition to the standard ET35-ET40, you can independently reach ET45.

Characteristics of wheels for Volkswagen Polo

The Polo model began production in 1975. In 2022, the 6th generation of this car was presented to the general public. General trends in the automotive industry have always recorded an increase in the main parameters of models of all classes, such as body dimensions, weight, power of the power unit, size of rims and tires, regardless of the brand. And Volkswagen has never been an exception. The characteristics of wheels in the basic configuration during the change of generations had the following features:

Tires for Volkswagen Polo 4th generation

• On the 1st, 2nd and 3rd generation Polo modifications, a 4x100 bolt pattern was used. The central hole for installing the wheel on the hub had a diameter of 57.1 mm.

Starting from the 4th generation of the model, the bolt pattern was changed to 5x100 with the same diameter of the central hole, and these parameters indicated an increase in all technical characteristics of the car.

• The size of the wheels on the Volkswagen Polo, as well as the diameter of the rims, has also changed over the years due to an increase in wheel arches and ground clearance. If the first models from the 70s of the last century had wheels with a range of dimensions R13-R15, then the latest generation has a wider choice - from 14 to 17 inches.
• The same applies to the width of the wheel rims. Today, drivers have the right to set any size in the range from 5J to 7.5J, and these are the indicators that the manufacturer uses for the disc offset, or ET parameter, from 38 to 51 mm.

Important!
The wheels on a Polo sedan or hatchback have universal characteristics that coincide with most cars of this class. Drivers are given a unique opportunity to purchase just the right wheels for their Polo, which will suit them both in style, size, and price. The latest Lada car models (X-Ray or Vesta) have the same wheel characteristics and the corresponding products from many domestic manufacturers are available on the market.

Tires for Volkswagen Polo 5th generation