Engine number on Kalina: Where is it located and how to look

The Lada Kalina family of cars includes the VAZ-1118 with a four-door sedan body and the VAZ-1119 with a five-door hatchback body. The vehicles belong to an especially small class (class B according to the international classification) and are designed for operation at ambient temperatures from -40 to +45 °C on public roads with hard surfaces. Lada Kalina cars are equipped with an 8-valve engine of the VAZ-21114-50 model with a displacement of 1.6 liters (factory vehicle modification indices - VAZ-11183 and VAZ-11193) and a 16-valve engine of the VAZ-11194 model with a displacement of 1.4 liters (factory car modification indices - VAZ-11184 and VAZ-11194). Both engines are located across the engine compartment and are equipped with a distributed fuel injection system and a catalytic exhaust gas converter, structurally made in a single block with the exhaust manifold.

The body is monocoque, all-metal, of welded construction with hinged side doors, front fenders, hood and trunk lid (tailgate). The transmission is made according to a front-wheel drive system with drive wheels of different lengths. The front suspension is independent, spring, with anti-roll bar, with hydraulic shock absorber struts. The rear suspension is dependent, lever-spring, with hydraulic shock absorbers. The front wheel brakes are disc brakes with a floating caliper, the rear wheels are drum brakes. The steering is safety-resistant, with a rack-and-pinion steering mechanism and an electric booster. Lada Kalina cars are equipped with a remote control system for locking or unlocking side door locks (in a variant, also locking the trunk lid or tailgate lock) with simultaneous activation or deactivation of the vehicle security mode. In addition, provision is made for remote activation of alarm systems in case of violations of vehicle security zones and blocking of all side rails (in the optional version - the rear) by pressing a button from inside the car. The overall dimensions of the VAZ-2118 car are shown in Fig. 1.1, VAZ-2119 car in Fig. 1.2, technical characteristics in table 1.1. Elements of the engine compartment of the Lada Kalina car are shown in Fig. 1.3 and 1.5. The location of the main components and assemblies of the car is shown in Fig. 1.6)

Rice. 1.1 Overall dimensions of the VAZ-2118 car

Passport details of Lada Kalina

In the engine compartment there are: A - body identification number; B - identification mark; B - engine model and number. Identification number (For the vehicle, engine model, name of the manufacturer, year of manufacture and certification information are given in the identification plate (Fig. 1.4).

The vehicle identification number is stamped on the right shock absorber support in the engine compartment on the strut.

What to do if the plate with the VIN number of the Lada Vesta is lost due to an accident or repair?

If no crime is found behind the car, then you can go back to check the license plates and register the car.

Rate the article on the website! Your opinion is important to us! (25.00 out of 5)

The Lada Vesta SW Cross blog is a collection of thematic articles in which you will find all the information about the new product of the domestic automobile industry - technical specifications, reviews, configurations and prices, repair and maintenance instructions.

Interior and engine compartment space

All doors, hood and trunk lids should open without jerking. The hood must be pressed against the body in the closed position. The spare wheel, wheel wrench and jack are always kept in the luggage compartment. Having verified this, proceed to inspect the engine compartment:

Note that now some factories do not explicitly print the battery production date. Instead, special code is used.

The numbers 309 mean the following: third month, 2009

Of course, it would be advisable to check the engine and body number with the values ​​indicated on the PTS coupon. In Kalina-2, all the numbers need to be looked for under the hood:

The three most important signs

The following elements are indicated in the figure:

Inside the car, they check whether the main blocks and components can be adjusted:

It is necessary to check whether each of the seat belts is securely fixed in the connector. You can also try shifting the gearshift knob without starting the engine.

The serviceability of seat belts is checked as follows: the belt is pulled sharply, after which the tightening mechanism is activated.

Decoding the VIN code of Kalina

The transcript looks like this.

1. XTA is the international designation of the manufacturer.
2. 111930 – part of the code indicates the car model.
3. 7 – a changing segment indicating the year of manufacture of the car. in this case it is 2007.
4. 0014223 – the last part of the code always indicates the serial number of the body under which it came off the assembly line. The number for each car is individual and is the most important part of the vehicle passport.

To avoid the possibility of cutting the damaged car and its further use, the manufacturer duplicates the number on the rear right arch. Both codes must be identical.

Geometric dimensions of the openings of the VAZ 2118 Lada Kalina sedan

Body dimensions Kalina
Measurements of geometric dimensions should be carried out correctly. So, if a car has a roof leak, you need to measure the diagonals of the roof; if there are problems with the openings, then measure the openings accordingly.

The causes of geometry violations can be not only accidents or serious accidents. If you often drive on uneven roads, encountering various obstacles, the position of certain body elements may change. In principle, suspension is provided for such cases, but over time it weakens, and its vibrations, like it or not, are transmitted to the body.

In most cases, the geometry is tested before purchasing a used Kalina. An event carried out competently provides information about whether the previous owner’s car has been in an accident or not, what the condition of the body is, etc. In addition, diagnostics of this kind are recommended to be carried out regularly by car owners for preventative purposes.

Many experts recommend that owners examine the body geometry even after any repairs carried out at a service station. It happens that in the process of these repair manipulations the qualifications of service workers turn out to be insufficient. They only restore the body and its parts externally, but in reality the distances turn out to be shifted.

Obvious features of body damage are visible even without measurements. For example, if Kalina’s doors begin to close or open poorly, it is recommended to do a full geometry check.

Another symptom of body displacement is the unstable behavior of the car on the road at high driving speeds. It moves around, it vibrates, etc.

Engine tuning

To improve the performance of the 11183 engine, several types of tuning can be used:

Practice shows that chip tuning for 8-valve internal combustion engines is not effective, and turbocharging leads to increased wear of parts, so these methods are rarely used.

Thus, the 11183 motor has a serious advantage - it does not bend the valves with pistons when the timing belt drive breaks. However, there are a number of shortcomings that were corrected only in later versions of engines from the manufacturer AvtoVAZ.

Body and external accessories

Before buying a car, always check for scratches on the paintwork. It would be better to add the following to this action:

Even before starting the engine, try unscrewing the tank cap and then install it in place.

The plastic stopper additionally holds the cord

As you continue to inspect the vehicle, you can pay attention to the following elements:

Finally, try folding both mirrors located on the outside of the body. If it is determined that everything is in order with the mirrors, you can proceed to inspect the interior.

In the rear doors of the Kalina-2/Granta family of vehicles, a mechanism is installed that allows you to block the door from being unlocked from the inside. On the front side there is a lever that rotates 45 degrees. On the left door the lever is turned to the left, on the right door - clockwise. This is how the serviceability of the locking mechanism is checked.

How to read information

To read the marker, where the engine number is written on the Lada Kalina, you need to get to it. For this purpose, remove the housing of the air filter element and move the wires to the side. Government officials use a mirror that helps them check information without disassembling it, provided it is not dirty.

Engine number Lada Kalina:

The identifier on the glass contains information that is interpreted:

Production year designations:

Number on the shock absorber strut:

Remember that the markings on the shock absorber strut and arch are the same. Knowing where the engine number is located on the Lada Kalina is the responsibility of every user. Do not forget that a lot of information is contained on the plate attached to the radiator frame.

The information provided can be deciphered as follows:

The symbols used when ordering parts are stamped in the vertical column; the design option and the kit used are indicated below.

Characteristics of motor 11183

The official AvtoVAZ manual contains a description of the parameters of the ICE 11183, according to which the technical characteristics are as follows:

The operating manual from the manufacturer includes information on lubricants and coolants. In particular, for these engines it is recommended:

which oil to choose among the variety of fuel and lubricants manufacturers - ZIK, Total Quartz;

Installation 11183 under the hood

Where is the Engine Number of Datsun He Do?

Datsun cars on the Russian market, many buyers have questions. How did a Japanese car manage to cost less than 400,000 rubles? Who will sell this car, and where will they assemble Datsun DOP in general? You will find answers to all these questions in this article. We will also look at the advantages of cars of these brands, the main disadvantages and the experience of drivers. Below is a photo of a Datsun car. These machines are discussed below.

Where do they assemble Datsuns for DOP? Manufacturer country

Back in 2012, Nissan announced that it intended to revive the Datsun brand. The Japanese auto giant decided to make a budget for underdeveloped countries under this brand. The main feature of such cars was their adaptation to each market separately. For example, for the Indian market, where only the price of the car matters, the Japanese Datsun was created for one package. Email address or number

phone, if this is an optional Datsun test drive, it is found in the engine and where it is located . Given the fact that Datsun had to try. In addition, when designing a vehicle, we must take into account the prevailing climate and the quality of the road surface. It is also important for engines and the fuel system to accept domestic gasoline. Lada Kalina and Lada Grant. the same in the market. Therefore, they decided not to worry and signed a contract with AvtoVAZ.

Lada and Datsun cars have the same platform

After this, it turned out where they assembled the Datsun for K. These Japanese cars are assembled in Togliatti in the same plant and production line as the Lada Kalina and Lada Grant cars. In addition, the new Datsun is made on the same platform as in the models of the domestic auto industry. According to the chairman of AvtoVAZ, Ducun will become an incentive for the development of the concern.

This also means that all the improvements to Ducun will be coming to Kalinas and Grants very soon. Where is the engine number for the Renault Logan photo. For example, Datsun on-DO cars must change the shape of the exterior mirrors. This also reduces mirror contamination. This solution will appear in Lada soon.

Why did Japanese manufacturers choose AvtoVAZ? The fact is that they are cheap and simple, all the components for them are made. Price. It so happens that the new Datsun also has a low price due to the low cost of the platform.

Differences between Ducun and Lada

The structural Auto “ Datsun “Grant” has differences. Main. it's exterior and interior design. But from the point of view of technical parameters, the model is the same. Lada cars have several engine configurations. With 16 valves and 8. These cars can also be equipped with an automatic or manual transmission. The Datsun is powered by an 8-valve engine that produces 87 horsepower and is also a manual or there have also been claims that there will be a budget option. Datsun with crank engine. Datsun and Lada Grant you see in this section.