Tuning package STAGE-2 for 16V VAZ 2110-2112, Kalina, Priora

The VAZ-2112 engine is perhaps the most important part of the car. It is of good quality and lasts a long time. But when the question of tuning arises, then improvements are needed. They can be carried out both on a new device and after a certain period of operation. The second option is more common. And this is not surprising. After all, only after practice can you determine what improvements the device lacks.

Engine tuning is an important and responsible process. It must be taken as seriously as possible. The manufacturer offers a motor and other components of average quality. Their characteristics are quite primitive, although they comply with the standards and requirements that apply to such devices.

Despite the fact that the VAZ-2112 is not as popular among buyers as other cars of this model, it has already acquired its admirers. Craftsmen have found different options for improving it. Many of them can be done with your own hands. But there are also more complex ones that require the help of specialists.

We increase the power of the VAZ-2112 16 valve engine with our own hands - tuning detected!

We can talk a lot and for a long time about tuning the engine of a VAZ-2112 car. Fortunately, there are many spare parts and various modifications available in stores for this purpose. In this article, we will tell you in detail how to do engine tuning with your own hands, identify each position separately and tell you about their advantages. All you have to do is decide what exactly to improve and where to start!

Chip tuning

The most affordable method for increasing engine power, which does not involve making changes to the hardware, but working exclusively with electronics.

In most cases, the standard version of the software is replaced with a program for the racing characteristics of VAZ cars.

Results after chip tuning.

Changing these parameters is best left to specialized companies, since this work requires certain skills. If you own one, you can easily cope with this task. And after flashing the controller, you will immediately see an increase in dynamics and overclocking (about overclocking the stock version to 100). However, your consumption will definitely increase (about consumption rates here) and the level of emissions into the atmosphere will decrease.

In addition, you can consider online firmware of the system without fundamentally changing the program, but only making changes with minor adjustments to the operation of the engine.

What can be changed?

In order to get started, you need to set precise goals. An example would be:

• Increased power. In almost 80% of cases, the engine power is increased, which determines the acceleration time from 0 to 100 km/h. Increased power also causes increased traction in low gears.
• Some are upgrading the engine in order to reduce fuel consumption. Note that fuel consumption can be reduced without significantly changing the engine design - it is enough to restore its condition and configure it correctly.
• You can increase the maximum speed. In some cases, the manufacturer installs a speed limiter that prevents the car from accelerating. An increase in engine size also causes a significant increase in the maximum possible speed.

Sidebar: Important: Changing the engine should also affect other vehicle systems. An example is that fast acceleration can only occur with the correct camber setting, stiff suspension and fairly good brakes. VAZ 2110 engine tuning should be carried out in stages, since mistakes made can ruin the engine.

Changing engine displacement

The most favorite tuner engine is 124

This method is one of the simplest and most convenient. Such tuning will significantly increase engine torque without changing your driving style. It can be increased by boring the cylinders or increasing the piston stroke.

• By increasing the cylinder capacity, you will immediately increase engine power . This is based on the fact that there is a reserve in the thickness of the cylinder walls and they can be bored using a special machine. Bored cylinders will burn the greatest amount of fuel in the same amount of time, thereby increasing the throttle response of the engine.
• increase the piston stroke by using a new crankshaft, which has a large eccentricity, and selecting appropriate pistons and connecting rods for it. As a rule, lightweight connecting rods in this case are installed, since weight in this case plays an important role. The new piston group allows to significantly increase efficiency and, accordingly, power. At the end of such tuning, it is advisable to install a lightweight flywheel in order to relieve the load on the crankshaft and clutch, which will certainly have a positive effect on the dynamics and acceleration of the car.

Boring cylinders on a machine.

Compression ratio

• The very concept of compression ratio implies the ratio of the combustion chamber to the total volume of the cylinders. This will simultaneously significantly increase efficiency, engine power and reduce fuel consumption.
• These indicators can be achieved by installing a new camshaft with completely different geometric parameters. Thus, the new element is able to increase the volume of the combustion chamber, while the engine volume remains unchanged. Such work is best carried out together with the installation of a turbine (see below - note). However, remember that this work is not cheap.
• You also need to know that when installing such a camshaft, the octane number of the gasoline being poured must be increased, as well as improving the engine oil being poured, which has the lowest friction coefficients. When carrying out such tuning, compression units can increase to 10 units.

Throttle valve

Many owners of VAZ two-wheelers resort to engine tuning by increasing the diameter of the throttle valve. Of course, to increase the volume of the air mixture, such tuning is advisable. In stores you can find dampers with a diameter from 52 to 56 mm. However, please note that by increasing the diameter of the damper, you will also have to change the pipes. Quite often, failures occur not because of problems with volume, but because the throttle valve is clogged, in which case it needs to be cleaned.

Dampers of different diameters.

Inlet receiver

Thanks to the largest volume of the intake receiver, more air will flow in, which means it will work more smoothly. After this modification, the engine compliance even above 5 thousand revolutions will remain stable.

Engine characteristics 21124

Years of production – (2004 – today) Cylinder block material – cast iron Power system – injector Type – in-line Number of cylinders – 4 Valves per cylinder – 4 Piston stroke – 75.6mm Cylinder diameter – 82mm Compression ratio – 10.3 Engine displacement VAZ 21124 – 1599 cm3 Engine power 21124 – 89 hp. /5000 rpm Torque - 131 Nm / 3700 rpm Fuel - AI95 Fuel consumption - city 8.9 l. | track 6.4 l. | mixed 7.5 l/100 km Oil consumption - 50 g/1000 km Engine 21124 oil: 5W-30 5W-40 10W-40

Engine life 21124: 1. According to the plant - 150 thousand km 2. In practice - 200-250 thousand km

TUNING Potential – 400+ hp. Without loss of resource - up to 120 hp.

The engine was installed on: VAZ 21104 VAZ 21114 VAZ 21123 “Coupe” VAZ 21124VAZ 2114 Super Auto (211440-24)

Installation of a zero resistance filter

A zero-resistance filter, or simply “zero filter,” is mounted instead of the air filter and its housing. It is designed to reduce the resistance of incoming air into the system. Large filter throughput allows you to increase engine power by a couple of percent. Remember that the correct choice of filter and impregnation for it is the key to proper engine operation.

This tuning is one of the most affordable.

Channels and valves

• The exhaust and inlet channels are supposed to be ground , increasing the diameter at the inlet, and not changing the diameter at the outlet. We remove all irregularities and various joints that can in any way slow down the flow.
• Valves - it is better to use special lightweight or increased diameter ones. It is also expected to use the stiffest or sportiest springs, as well as lightweight valve plates.

The difference between the lightweight valve (left) and the regular one.

Is it worth replacing the unit?

It should be noted that recently, quite often, a new engine is being installed in place of the old one. Some engines may be suitable for the vehicle in question and only minor modifications are required to correct the problem. However, during the work the following problems may arise:

• The engine may not fit the transmission.
• When installing it, you will have to change the position of some important units: generator, radiator, fuel pump. There is also a high probability that the mount in the engine compartment will not be suitable for the selected engine.
• A significant increase in power leads to the need to replace or upgrade other units.
• The cost of the work carried out is very high, and the result is quite vague.

The above points determine whether it is necessary to carry out work to completely replace the power unit. As a rule, when doing the work on their own, many mechanics decide to modify an already installed engine. An exception is the case when the motor is in poor condition.

Fuel supply

Conventional injectors are not enough to operate the engine at high speeds. Since they are constantly in operation, the working pressure in the ramp is simply not enough. In order to increase engine power, you should install the most efficient nozzles, which can increase the volume of sprayed liquid several times. Such changes work most effectively with the 4-2-1 release technology.

Turbocharging

• The most effective, widespread and most expensive type of tuning is the installation of a turbine. After all, it is known that in order to increase engine power, it is necessary to supply the largest amount of a mixture of air and fuel into the cylinders.
• However, to increase the volume of fuel, a mandatory increase in the amount of air will be required, which is what the turbine does. The exhaust gases enter the turbine impeller, then it rotates and drives the compressor, which in turn pumps air into the cylinders.
• Since the air is pumped under pressure, its quantity increases significantly, which leads to an increase in fuel combustion, which results in an increase in power.
• Remember that installing a turbine will lead to a mandatory upgrade of the cooling system (diagram of a standard cooling system here).

The most expensive method of tuning a VAZ-2112.

Engine malfunctions and repairs 21124

AvtoVAZ continues to develop 16 valve engines and in 2004 the VAZ 2112 engine was replaced with a 124 engine. It uses a Kalinovsky high block, it is 2.3 mm higher compared to the old block 2112, the piston stroke has increased from 71 mm to 75.6 mm, due to this the volume has become 1.6 liters. On the same block, behind the air filter, above the gearbox casing, there is a platform on which the VAZ engine number 21124 is stamped. By adapting the 124 engine to Euro-3 standards, its environmental performance has increased, low-end traction has appeared, the engine has become quieter and a little noisier than the twelfth . Engine 2110 124 1.6 l. injection in-line 4-cylinder with overhead camshafts, the gas distribution mechanism is belt driven. The service life of the motor 21124, according to the manufacturer's data, is 150 thousand km; in practice, the motors run about 200 and even 250 thousand km. In 2007, a new engine was released, replacing the 124th engine - the well-known Priora engine. In addition, based on the 124 engine, the Super-Auto company produced a 1.8 liter VAZ 21128 engine, something is also said about it)

VAZ 2112: engine tuning in various ways

Easy tuning of the VAZ 2112 engine

VAZ 2112 engine modification is the most important, responsible and serious stage in tuning. From the factory, cars are equipped with standard engines that have average characteristics that meet the standard and requirements of the average consumer. To improve the performance of their favorite car, improve its dynamics and increase engine power in the VAZ 2112, owners resort to thorough engine tuning. Although the history of VAZ2112 cars is not yet rich at all, compared to other VAZ models that have become classics, this car model is becoming a favorite in the hands of folk craftsmen. Currently, there are many methods for modifying VAZ 2112 engines, more than half of which can be done independently, the rest require the help of specialists.

Installation of "nulevik"

This is what is commonly called an air filter with low resistance. It is designed to reduce resistance in the intake system and thereby increase the throughput of the filter, thereby achieving a slight increase in power. These filters differ from standard filters in their high throughput. Tuning a VAZ 2112 engine requires a professional approach and care during all operations. Not every motorist understands the intricacies of engine operation, so it is advisable to entrust your car to experienced professionals. This will save you from inevitable mistakes during tuning and save a lot of time.

Performance Improvement Methods

Increasing the working volume

The best modification of VAZ 2112 engines is this method, it is the most convenient, quite simple, and the most common. It allows you to increase engine torque without changing your driving style. This can be done in two ways - boring the cylinders and increasing the piston stroke, now in more detail:

• The piston stroke is increased due to the installation of a new crankshaft, which has a greater eccentricity and the selection of pistons and connecting rods for this shaft
• Connecting rods are usually selected by weight and installed mainly from lightweight options
• The piston is a key part in any engine, so replacing the piston group can significantly increase engine efficiency and power
• And at the end of the tuning we install a lightweight flywheel
• Such actions lead to a reduction in the load on the crankshaft and clutch, which speeds up the acceleration of the car and increases its dynamics.
• Slightly easier tuning of the stock VAZ 2112 engine, cylinder boring
• The method is based on the fact that engines, as a rule, all have a margin of thickness at the cylinder walls (reserve margin)
• From this we can conclude that the volume of the cylinders can be increased by boring; by grinding down the walls, we increase the volume due to them
• This will immediately increase the engine power, because the bored cylinders begin to burn a larger volume of fuel per unit of time.
• Do-it-yourself boring is not done, only on specialized equipment
• After boring, pistons and rings of repair size are installed

Increasing the compression ratio

“Compression ratio” is essentially the ratio of the total volume of a cylinder to the total volume of its combustion chamber. By increasing the compression ratio, it is possible to significantly increase the engine power and its efficiency, in addition to slightly reducing gasoline consumption. So:

• VAZ 2112 increase in engine power is achieved by installing a tuning camshaft that has different geometric parameters
• Due to the new camshaft, the volume of the combustion chamber increases, without increasing the volume of the engine itself, which has a very positive effect on its power and efficiency.
• It is more advisable to perform the VAZ 2112 engine tuning procedure by replacing the camshaft in parallel with other engine modifications, for example, combined with the installation of turbocharging
• However, it should be remembered that operating an engine with a high compression ratio independently requires the owner to use high-quality fuel and branded engine oil
• Otherwise, your engine may suddenly start to stall, its temperature may rise sharply above the permissible norm
• The compression ratio increases to 9.7 - 10

Malfunctions and repairs

The most common malfunction that VAZ 2110 owners encounter is when the 21124 engine fails. This is expressed in unstable engine operation, interruptions in operation, increased vibration, noise and gasoline consumption. What could be the reasons for this unpleasant phenomenon and what repairs will be required on the VAZ 21124 engine.

If the engine in any VAZ 2110 car is malfunctioning, then, firstly, you need to find out the reason, diagnose the ignition, fuel supply system, gas distribution mechanism, electronics and mechanical parts (pistons and crankshaft) and repair the VAZ 124, even if you do it yourself .

• Ignition - the wires are removed from the spark plugs one by one. If the friction increases when the wire is disconnected, then the cylinder is working. If it still troits, that means the problem lies there. In this case, the spark plug and high-voltage wire are checked. The easiest way is to install new ones, and if the problem is not solved, then the diagnosis must be continued by checking the ignition module. You can also try to replace it with a working one, or test its circuit with a multimeter.
• The cause of interruptions may be poor quality fuel. In this case, you need to change it and also wash the injectors.
• The piston and valve groups are tested together. First, you can disconnect the breather hose. If white smoke comes from the breather, then the problem is hidden in the pistons, or rather in their rings. If there is no smoke, then it is necessary to measure the compression. Reduced compression usually indicates a valve failure. If compression is normal, you can try adjusting the valves. Engine malfunctions can occur due to clamped or, conversely, too loose valves. These cases threaten to carry out the most complex and expensive repairs of the VAZ 21124.
• Interruptions can also occur due to a faulty crankshaft position sensor. It is removed, marking its position, and the resistance of the sensor coil is checked. Normally, it should show a resistance of 550-750 Ohms.

The 124 engine does not cause any other special problems. Previously, there was a problem with the impact of the valves on the piston and bending of the valves and the subsequent need to repair VAZ of previous modifications. But the 124th engine is freed from this problem due to recesses in the piston bottoms.

Gasoline supply

I think there is no need to explain the importance of maintaining a stable, constant gasoline pressure in the injector rail:

• During normal city driving, the standard fuel regulator is sufficient at high speeds, but a situation arises that with the injectors constantly open, it leads to a general decrease in pressure in the rail
• As a result, the fuel supply decreases, poor atomization results, and engine malfunction
• Therefore, boosting the engine requires increasing the pressure by 0.5 - 1 atmosphere, it all depends on the degree of boosting the engine
• Naturally, it will be necessary to adjust the injection program to ensure the correct mixture composition
• Today, in the latest (so-called “transitional”) models, as well as new 1.6-liter engines, a drainless system is used; the RTD is located in the tank with the fuel pump assembly and creates a higher pressure of 3.8 Atmospheres

Injectors

A natural process when, when boosting the engine, a situation often arises that the performance (amount of fuel supplied) is simply not enough:

• In this case, you will need to replace the nozzles, install more efficient ones, or install a second row of nozzles
• Option two is quite difficult and time-consuming, and it is not always possible to implement it even in a standard block.
• Therefore, it is easier to install more efficient injectors, having a productivity from +15% to +50% (and it is undesirable to use publicly available injectors used on GAZ cars; apart from high productivity, they have no more advantages)
• The disadvantages are the speed and non-linear characteristic at the beginning of its range, where a regular car has XX
• In addition, as a rule, 4-2-1 “spiders” are installed on souped-up cars, which work well in a wide speed range
• Spiders of the 4-1 system did not take root in civilian tuning due to the narrow range of their effective operation
• And the principle of operation of the exhaust is based on the vacuum created in front of the closed exhaust valve, this contributes to improved purging of the cylinder

The most important thing when carrying out tuning is a professional approach, in addition, care when performing all operations. Because not every driver understands all the intricacies of engine operation, so it is better to entrust the tuning of the car to experienced professionals. Since this will protect you from inevitable mistakes typical for beginners during tuning, it will help save time and money. Additionally, watch a video on the tuning you are interested in.

Source

Valve tuning: features of implementation

This engine, like any other, has valves. They are an important component of it and are responsible for the operation of the entire system. Moreover, they come in several types: 8 and 16. Depending on which one is used, such are the characteristics of the motor. And, of course, the whole car.

When choosing valves for tuning, preference should be given to those with a larger diameter or lighter ones. In this case, it is necessary to take into account the rotation of the motor. If it exceeds 6000 rpm, then it is better to install stiff springs on the valves. Also in this case, both sports and modified plates, which are made from titanium, are suitable.

When replacing valves, you can use parts from other car models. For example, the 8-valve engine functions perfectly with BMW parts. In this case we are, of course, talking about valves. This modification option is often practiced. And, as experience shows, it is quite successful.

Before choosing valves, you need to evaluate your financial capabilities, since there are many parts. They differ not only in their characteristics, but also in cost. If you prefer an inexpensive option, then titanium products are suitable. They can be purchased ready-made and ordered according to individual requirements and sizes.

If you decide to use standard products, then you need to carry out additional manipulations with them. They should be significantly lightened and ground in. The manufacturer does not include these stages in the production process. Therefore, this gap must be filled on our own.