The best oil filter for Priora 16 valves

The oil filter of a Priora car is responsible for cleaning the oil from impurities and metal particles. There are many filter manufacturers on Priora: Mann, Livny, Big, Salute and others. The price of an oil filter starts from 200 rubles - read the article to the end: you will find out popular filters, which one is better and the article numbers (original number) for them. All the oil in the engine flows through the oil filter. Therefore, it is the most important element of the filtration system. It is located in the lower engine compartment. The degree of oil purification affects the operation of the engine compartment. The cleaning system element does not depend on the engine type (16 or 8 valves); the standard configuration may have several variations.

Oil filter for Priora 8 and 16 valves

Regardless of whether the Lada Priora has an 8 or 16 valve engine, the car is equipped with the same oil filters. In the original configuration, filters from 2 manufacturers :

LADA 2108-1012005-08 – . Cost – from 160 rubles. Has a lot of negative reviews. The main disadvantages are oil leakage along the rolling contour and low quality filter paper.

Salute 2108-1012005-010 – . Average price - from 160 rubles. It has an original bypass valve design, which ensures constant oil flow through the filter, even when the filter components are clogged. Reviews about this filter model are different. The main disadvantage is the poor quality of filter paper. It often breaks during operation. Also uneven placement of the filter element.

Oil filter Salyut 2108-1012005-010

Dimensions of the original oil filter Lada Priora

External diameter	Inner diameter	Bypass valve opening pressure	Thread
93 mm	62 mm	1.2 bar	3/4″-16UNF

When choosing an oil filter for LADA Priora, you should pay attention to the following substitutes:

BIG Filter GB-102M . Price – from 120 rub. Manufacturer: Russian company BIG Filter. A popular substitute among Lada Priora owners. According to customer reviews, the quality is above average. Among the shortcomings is a weak rubber sealing ring.
FRAM PH5822 Price – from 170 rub. Reviews about this filter model are both positive and negative. The main disadvantages are that the filter element has a small total area and is not dense enough.
Mann W914/2 Part price – from 170 rubles. High-quality foreign analogue for Priora. Customer reviews are only positive. It has good quality synthetic filter paper, as well as an opening pressure of the bypass valve of 1.2 bar.

How a successful successor to the “ten” was created

Lada Priora, or VAZ 2170, was born in the throes of design for quite a long time. The “birth” began when the first 2110 just rolled off the assembly line. Manufacturers already understood then that the “ten” would soon be restyled, and far from cosmetic. Almost everything had to be changed - interior, exterior, power units, chassis. A lot of time was spent on these efforts, even foreign companies were involved. In total, about two thousand parts were replaced, that is, more than 50% of the car.

Finally, by 2001, the “face” of the new car was finally formed. By 2003, a prototype was created. Serial production began at the end of 2006, and sales began only in the spring of 2007. From the very beginning, a sedan was produced (VAZ 2170), a little later - a station wagon, as well as a hatchback (2171 and 2172). Coupes were produced in limited numbers (21,728). Under the hood, the Priora has a new engine - a 16-valve version of the previous, 8-valve VAZ 21116, number 21126 with a capacity of 110 “horses”. Its dynamism and reliability have improved.

The model was successfully produced and sold for almost 10 years, until in mid-2016 AvtoVAZ managers announced that production would be discontinued. During this time, more modern car models appeared - Grant, Kalina-2 and Vesta. Be that as it may, 2170 turned out to be a successful model and still pleases its owners.

Choosing a Lada Priora oil filter

Many VAZ-2110 car owners often have disputes about which oil cleaner (hereinafter referred to as MF) is better to install: with a long or short skirt.

Don’t worry, both filters are compatible with the AvtoVAZ 2110 model. They were installed with a long skirt until 2013, and with a short skirt - starting from 2014. The parts are interchangeable with each other, the dimensions and parameters are identical.

Manufacturers: domestic and foreign.

Replacing the oil filter yourself is not difficult; it is quite feasible for a driver without vehicle maintenance skills.

Snapshot00000

To avoid damage, disconnect the wiring harness from the crankshaft position sensor.
To avoid damage, disconnect the wiring harness from the crankshaft position sensor.

To avoid damage, disconnect the wiring harness from the crankshaft position sensor.

Unscrew (counterclockwise) the oil filter.

Good non-original filters: articles, price

Specifications (size):

outer diameter: 86.5 mm;
screw thread: M20x1.5;
internal diameter: 58.4 mm.

vendor code	Price in rubles
H12W05	PH5796	TF 61	From 330 – 370
COF100102S	W 920/21	TF 57	From 330 – 370
COF100030S	W 914/2	TF 32	From 330 – 370
Mann 10891	Mann W 75/3	TF 30	From 330 – 370
C-2512	W 712/75	LC-1501	From 330 – 370
C-1823	W 7053	LC-1400	From 330 – 370
LC-1501	10891	LC-1031	From 330 – 370
LC-1400	10398	LC-1030	From 330 – 370
LC-1031	10189	PF4112	From 330 – 370
LC-1030	C-2512	PF4057	From 330 – 370
PF4112	C-1823	PF4033	From 330 – 370
PF4057	TF 63	COF100118S	From 330 – 370
*prices are as of July 2022

What kind of oil can be poured into the VAZ 2107 engine

A car owner who decides to change the oil on his “Seven” for the first time will inevitably face the question: which lubricant to choose? This is not an idle question, because there is a huge amount of motor oils on the modern market. It doesn’t take long to get confused by such abundance. Therefore, it is worth understanding the types of motor oils and their differences.

Types of oils

Essentially, engine oils are divided into three types:

synthetic oil;
semi-synthetic oil;
mineral oil.

Now let's look at each type of oil in more detail:

Synthetic motor oils are the most expensive. This should not be surprising: “synthetics” have excellent temperature parameters and viscosity. If the driver has filled in with high-quality synthetic oil, he can be sure that it will not freeze even at -50°C, and this circumstance is very useful given our climate;
Semi-synthetic motor oils are a mixture of mineral and synthetic oils. “Semi-synthetics” do not have such a wide range of operating temperatures, but they have one undoubted advantage: they are cheaper;
Mineral motor oils are the cheapest today. The reason is simple: the viscosity of these oils directly depends on the outside temperature. For example, at forty-degree frost, most mineral oils turn into a substance similar to plasticine.

How to distinguish a fake from an original filter

You can purchase consumables, including MF, in various places, namely:

at the car market;
in a specialized store;
in online catalogues;
through intermediaries.

Given the breadth of choice, for an inexperienced owner the risk of purchasing non-original products increases due to insufficient knowledge of unmasking factors.

When selecting consumables, be sure to check the availability of:

and integrity of branded cardboard packaging;
holographic protection from the front of the package;
factory stamp with batch number, date of manufacture, country of origin;
rubber seal on the inner diameter of the MF.

When purchasing, check for a quality certificate or other documentary materials indicating the origin of the product. If in doubt, refuse.

Which lubricant will be best for VAZ 2107

The choice of engine oil for the VAZ 2107 is quite large. The car was produced from 1982 to 2012. The car was equipped with B032103 1.5 liter carburetor engines - the most of them were installed. In the 2000s, preference was given to 1.6-liter B032106 injectors. The manufacturing plant AvtoVAZ recommends the quality of the lubricant; there are no strict recommendations regarding the viscosity characteristics.

For injectors, it is proposed to use an oil mixture that meets the SG/CD and higher categories of the American API standard. This means that products compatible with these categories can also be used - for example levels SH, SJ or SL. They will be of higher quality. For Lukoil and Esso lubricants, there are viscosity requirements. For unworn engines, you can try a high-temperature viscosity of 30 - for example, 5W30 or 10W30. This will ensure good starting at low temperatures, as well as optimal fuel consumption.

If the working fluid burns strongly, this will tell the owner that the engine is already wearing out. Then you should use a “summer” viscosity of 40 (5W40, 10W40). Oil consumption will drop, it will work more steadily and quietly. Regarding the base - synthetics, hydrocracking or semi-synthetics - VAZ does not give recommendations.

Reviews

Yaroslav Anatolyevich, 44 years old, Slavyansk: I bought a VAZ (Lada Priora) two years ago, the car is good, no comments. I take care and follow the maintenance schedule. Before visiting a service station, I always purchase consumables. In particular, I always take fuel and oil filters with original serial numbers (H90W03, H90W27). My comrades buy high-quality analogues, they are cheaper. I believe that there is no need to cheapen consumables.

Dmitry Nikolaevich, 41 years old, Astrakhan: bought a VAZ car secondhand, got it from the previous owner in good condition. During two years of active operation there were no serious breakdowns, only scheduled maintenance. I don’t buy original filters, I limit myself to high-quality analogues, they are a third cheaper. I always order from the online store, it has been tested over the years, my recommendations to motorists.

Denis, 35 years old, Melansk: I don’t trust analogues, I always buy factory products and consumables (H90W03, H90W27). I believe that what is prescribed by the manufacturer is most compatible with the model of my car. I bought third-party products several times, I didn’t like it, the LED lamp on the dashboard burned for a long time.

Alexey Vladimirovich, 42 years old, Voronezh: I carry out the technical inspection on my own. As for consumables, I always take originals with factory serial numbers so that the engine lasts longer and breaks down less often. I buy spare parts in a specialized store, they are always of high quality and come with a guarantee from the manufacturer.

Leonid, 33 years old, Aktyubinsk: bought a Lada Priora car second-hand, the previous owner installed non-original consumables (C-1823, W 7053, LC-1400). I didn’t change it, I buy similar spare parts. Technical inspection is 15% cheaper and does not affect the quality and performance of the machine.

Source

Non-original or original VAZ spare parts, what to choose?

How do original spare parts differ from non-original ones? When it comes time for maintenance, every car owner asks himself this question. Let's look at the difference between these spare parts and determine which ones are more popular.

Original spare parts are parts from car manufacturers that were installed on the car during its assembly on the assembly line, and after that they are sold under the brand name of the manufacturer. Features of original spare parts:

Full compatibility with the car.
High quality parts, and therefore the longest service life.
High price.

Non-original spare parts (analogues) are parts from independent manufacturing companies that were not used when assembling the car on the assembly line. Features of analogues:

The cost is an order of magnitude lower than the original ones.
The quality of parts may vary and depend on the manufacturing company.
Large selection and availability in warehouses.

How to spot a fake ? It is no secret that today the level of counterfeiting is extremely high, and it is impossible to distinguish a counterfeit banknote without special equipment. What can we say about packaging and labels for car parts? With the use of modern printing methods, they can be made in any way. Both non-original and original spare parts are counterfeited, and very often it is simply impossible to identify a counterfeit in a store (see example of a counterfeit oil filter). To reduce risks to a minimum, we recommend purchasing original VAZ spare parts from an official dealer, and non-original parts only from trusted stores, or directly from manufacturers’ warehouses.

Let us remind you that you can buy VAZ spare parts in trusted online stores, and you can make your choice for each part in the “Best VAZ spare parts” category.

Osipov Mikhail, VAZ 2112, Toyota Camry, driving experience 11 years.

Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.

Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet.

You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, it is called forex.

But when I started to delve into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums and studying trading strategies. I tried it on a demo account, then opened a real account.

To be honest, I didn’t manage to start making money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day.

I managed to buy a car after half a year, but as for me, this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, and I have more free time for myself and my family.

You will laugh, but I work right on the phone)) If you want to change your life like me, then here’s what I advise you to do right now: 1. Register 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY!

I also advise you to download the application to your phone, it’s much more convenient to work from your phone.

What spare parts do you buy for a VAZ car?

Interesting site? Share with your friends

Source: https://xn--2111-43da1a8c.xn--p1ai/repear/1145-repair-heating-rear-glass-glue.html

Life hack: Priora oil filter

Snapshot

On each side, using a Torx T-30 wrench, unscrew two self-tapping screws securing the mudguards of the engine compartment to the mudguard of the power unit.
On each side, using a Torx T-30 wrench, unscrew two self-tapping screws securing the mudguards of the engine compartment to the mudguard of the power unit.

On each side, using a Torx T-30 wrench, unscrew two self-tapping screws securing the mudguards of the engine compartment to the mudguard of the power unit.

Dimensions of the original Priora oil filter - article number

Regardless of the type and characteristics of the engine, the factory version of the Lada Priora is equipped with one of two filter options.

Oil filter salute

Manufactures. The company has been producing filter system elements for VAZ cars since 1998. Among the advantages of the part is a bypass valve device. Thanks to this system, the part allows the oil substance to pass through it, even if it is completely clogged. Among the disadvantages is the low quality of filter paper. It often breaks.

The article number for the oil cleaning element is 2108/1012005/010. The price of the part is from 150 rubles.

Oil cleaner Lada

Releases. Car enthusiasts note the low quality of the part. Disadvantages - poor quality paper, oil leakage around the perimeter of the folding.

Part number – 2108/1012005/08. Price – from 150 rubles.

To replace a part, you need to know its dimensions in order to select an analogue.

Dependence of engine cleanliness on the brand of oil and type of fuel

It's no secret that the engine must be clean inside throughout its operation. Its purity is affected by several indicators - the type and brand of motor oil used, as well as the fuel used. If you use liquefied natural gas, it forms much less deposits than gasoline. By running on such fuel, the engine increases its service life. Motor lubricant can also be changed much less frequently.

High-quality synthetics should be changed every 10 thousand km when using gasoline. Using gas, you can increase the interval to 15 thousand. If the car owner uses semi-synthetics, the oil composition needs to be changed more often, after 6–7 thousand km. Using gas, you can change it less often - every 10 thousand. Then the engine will be clean with minimal wear.

The quality of the device is also important for the power unit. A good filter element must trap very small particles in order for the cleaning quality to be high. Foreign-made parts have proven themselves to be the best. The Russian one is not inferior to them in quality.

List of oil purifier analogues for Lada Priora

Since the hole for the filter in many machines is the same diameter, many manufacturers produce these consumables under their own brand.

Manufacturer: Big filter company. The price is approximately 130 rubles. Users note the quality. Among the shortcomings is a weak seal. Article – gb 102 m.

The model is considered a foreign analogue of good quality. Those who used the analogue and installed the part found no shortcomings. The price of the mann cleaner is from 180 rubles. Article - w914-2.

Product code – ph 5822. Price – around 160 rubles. Among the reviews there are both positive and negative. The disadvantages are that the filter component is of insufficient size and density.

Article - 0451 103126. The filter will fit the characteristics of the Priora. It is distinguished by its quality and significant filtering area.

Flushing the VAZ 2107 engine and changing the oil

As mentioned above, completely draining the lubricant from a VAZ 2107 engine is a long process. The problem is that even after 20 minutes of draining, there is still waste left in the engine. This point is especially relevant if the oil is very old and therefore very viscous.

Such oil simply does not pour out of the small channels and openings of the engine. To remove this viscous mass, the car owner will have to rinse the VAZ 2107 engine with diesel fuel.

Flushing sequence

An important point: after the liquid oil has completely drained from the VAZ 2107 engine, you must remove the old oil filter from the car and replace it with a new one. You can save on the quality of this filter, since it will be used only once, during washing.

The drain hole, previously opened, is closed again with a plug. Diesel fuel is poured into the engine through the oil neck. Volume - 4.5 liters. Then a plug is installed on the neck, and the engine is cranked with a starter for 15 seconds. It is impossible to start the engine completely. To increase the efficiency of washing, the rear right wheel of the car can be raised by 15–20 cm using a jack.
The drain plug on the crankcase cover is unscrewed again with a 12 mm socket wrench, and the diesel fuel along with the dirt is drained.
After the diesel fuel is completely drained (which may take 10–15 minutes), the plug on the crankcase is screwed on, and 5 liters of fresh oil are poured into the engine through the oil neck, after which the plug on the neck is screwed on.

Video: the best way to flush the engine

Instructions for dismantling and replacing parts

To replace it, it is not necessary to contact a car service specialist. You can do the work yourself if you acquire the necessary tools and follow the sequence of activities.

What is required for dismantling and replacement

wrench or socket size 17;
workwear;
container for draining used oil;
new spare part;
screwdriver;
rags;
hammer;
lubricant;
oil.

Snapshot000000000000

If this cannot be done manually, loosen the filter with a puller.
If this cannot be done manually, loosen the filter with a puller.

If this cannot be done manually, loosen the filter with a puller.

If there is no puller, we pierce the filter housing with a screwdriver (closer to the bottom, so as not to damage the engine fitting) and unscrew the filter, using the screwdriver as a lever.