Starline autostart is the very function for which most car enthusiasts install this security and telematics complex. Regardless of the alarm model, it is quite simple and convenient.
But some configuration features must be taken into account based on the selected system option. We will tell you about the technical features of the most popular types of devices of the Russian brand, so that every car owner can use all the available features.
How to autostart from a key fob
In all modern Starline alarm systems, auto start from the key fob is included in the list of standard options. Therefore, there is no need to purchase and install additional mechanisms. It starts automatically using an intelligent system.
It connects the main unit of the security and telematics complex with the keys held by the owner. In this case, the device selects the frequency for communication independently, which does not allow attackers to intercept the signal.
You can start the car engine using the key fob in two modes: remotely before starting to move or automatically after a certain period of time or when the temperature of the power unit reaches a certain temperature.
The first method is relevant for those who prefer to get into a warm car and immediately go about their business. The second is used by car enthusiasts living in particularly harsh climatic conditions, when the internal combustion engine cannot be allowed to cool down for a long time, because it may not start back up.
Remote start for warming up before driving for all Starline models is activated by pressing button “1” on the key fob, and then button “3”. For periodic warming up, use the “2” button, but you need to set the operating mode in advance.
This is usually done by the installer during installation and preparation of the security complex for operation. So just check if the modes work on your car.
Important to note: Regardless of which alarm model is installed in your car, carefully read the instructions from the manufacturer before starting operation.
Remote engine start
The Starline B9 alarm system offers several options for remote engine starting. For example, a car owner can perform this procedure directly from the key fob - all that is required is the manipulation of the keys, which are described below.
Also (if there is an optional GSM module), the owner has the opportunity to start the engine using a command sent from the phone or via SMS message. To do this, you will need to purchase an additional SIM card, which will be installed in the car. She must receive calls, decipher messages and issue appropriate commands to control mechanisms. About the Starline B94 alarm system.
Duration of pressing key fob buttons
In addition to the question of which buttons to press to autostart Starline, new owners of the system are also concerned about the duration of this action. It depends on what model of alarm system is installed in your car.
In the first, that is, already slightly outdated, options, the algorithm looks like this: for three seconds you press the “1” button, and then, after the key fob makes a loud sound, make another short press of the “3” button. After this, the engine will automatically start in accordance with the settings.
On modern security and telematics systems, it is enough to press the first button for two to three seconds. After this, the device will make a loud sound, and autostart will start working. There is one more method, used much less frequently than the previous ones - activating the automatic start of the power unit using the icon on the key fob.
After the car receives a signal from the master key, the head unit makes the first attempt to start the engine. In normal weather conditions, with a working car, this will be enough.
But if the engine does not start, the security-telematics complex will make a new attempt, then a third or fourth. In this case, the starter operating time will increase by two fractions of a second each time.
Reasons why autorun does not work
Sometimes it happens that this function does not work.
For example, the starter turns the engine, but it does not start. In this case, it is necessary to check the presence of gasoline in the tank, as well as the charge of the battery. In the first case, everything is clear - you need to add gasoline. Secondly, charge the battery. It is also possible that the engine does not start when cold and even has difficulty starting with the key. In this case, you can set settings that will increase the starter operating time. You can also reduce the interval between startup attempts.
But the most common reason why a car won't start is simple inattention. Such reasons include the gear being in gear (for cars with automatic transmission – drive), unlocked doors, etc. It happens that the car stops starting due to the fact that the system does not receive the signal well.
In this case, the key fob displays information and immediately writes an error. To reset the protocol, you need to start the engine again with the key and tighten the handbrake. Then remove the key from the ignition, open the driver's door and activate the alarm again. Usually the car is armed again, and the OS7 error simply disappears. However, this is not always the case. If this does not happen, then you need to contact the service center.
Errors on Starline alarms
If the car does not start on its own, then some problems can be solved with your own hands. For example, after replacing the battery, the clock gets lost and all settings are lost, which means that the car starts at the wrong time. Be sure to set the correct clock value after installing a new battery in the remote control.
You also need to check the remote control itself. It may be damaged - have cracks on the display, mechanical damage, or a simply discharged battery. In this case, the signal is not transmitted remotely, and therefore the remote start does not work. In order to understand how “to blame” the key fob is, you need to configure the launch from the phone (instructions are described above). If even after this the problem does not go away, you need to conduct a thorough diagnosis; perhaps there is no signal to the starter.
Systems A96, B96, E96, X96
Sixth generation security and telematics systems, which is what all of the listed models are called, are distinguished by an innovative method of identifying the owner compared to other types of alarms.
To do this, use a smartphone or smart watch and a Bluetooth Smart channel. This combination guarantees minimal energy consumption, which means the service life of the batteries in the key fob is increased.
On the key fob of any of the listed security systems you will find four keys. To start the power unit, you must press button “1” for a long time, and to stop, press button “2” for the same long time.
In this case, each time you will hear a loud, thin sound, which will indicate that the command has reached the car's head unit.
The remaining keys are used when it is necessary to put the machine into service mode. Their combination is specified in the operating instructions. We do not recommend changing the settings yourself without knowing what it will lead to.
Important to note: If your car has a manual transmission, before using the Starline alarm with remote start, make sure to put the gear in neutral and apply the handbrake.
The most common causes of breakdowns
The Starline A91 alarm system is in deserved demand among consumers. It operates at an impressive distance, is able to ignore radio interference, and is simple and reliable to operate. Before using this handy anti-theft tool, you need to understand its basic features and functions.
Systems A93, E90*, A94*, B94*, D94*, E95, A95, B95, D95
Some of these models are already considered obsolete. They have been discontinued, which means that service for them has also been reduced. But security and telematic systems remain popular among ordinary people, including for automatic engine start.
To start the power unit or extend its operation for a while, you need to press the “1” key for a long time until the key fob emits two beeps.
You can stop the motor by pressing the same first button, and then the fourth. Yes, these alarm options use more switches for everyday use.
It is important to note: Security systems marked in the title with an asterisk are still being produced. The action protocol for outdated models released before 2015 is the same as described in the text. For younger ones, the same guidelines apply as for models A92, B92, T94.
Systems A92, B92, T94
Now let's look at how to enable autostart on a Starline alarm system if one of the models of this generation is installed. To start and stop the power unit in this case, use the following key combination:
- To start the engine, press “1” and “3” in sequence.
- To shut down the engine – “1” and “4”.
In this case, the first press should always be long (2-3 seconds), and the second – short. The first button must be released before pressing the second, otherwise the head unit will receive a different signal and will not be able to automatically start.
It is important to note: During autostart, the security complex independently turns off the wipers and car radio, but at the same time starts heated seats.
What can StarLine A91 do in terms of autostart?
- Random autostart: can be performed at any time when the car is in the area of reliable radio reception or an external GSM module is connected to the alarm system;
- Auto start on alarm clock: the car will start once at the time specified in the alarm clock settings;
- Autostart "Starline A91" using a timer allows the car to independently warm up the engine at intervals of 2,3,4 or 24 hours from the moment the mode is activated;
- You can set the “Starline A91” temperature so that engine warming begins when the engine temperature drops below a specified threshold, but no more than once per hour.
Video: Periodic auto start mode. Car alarm StarLine A91.
Systems A91, B9, C9
This is the latest, and therefore the smartest generation of car alarms from the Starline brand with automatic start of the power unit from the key fob. In addition to standard functions, these systems boast protection against intelligent hacking, an improved transceiver and luxurious equipment.
As for the autorun option, it is turned on by a combination of keys “1” and “3”, and disabled by successively pressing the buttons “2” and “3”. The duration is the same. First a long press and then a short press.
It is important to note: Security systems of this type are suitable for cars with a “Start-Stop” button. But to install them, you should contact specialists, because incorrect operation can lead to problems with the operation of the machine.
Systems A8, A9
These security and telematic systems are distinguished by broader functionality, including automatic engine start. To start the engine, just press button “1” for a long time. The car is turned off in the same way and is automatically armed.
If you do not want to activate the protection after turning off the power unit, press the “1” key again, but briefly.
Such a sequential action will transmit a command to the head unit to disarm the system. Just do not leave the vehicle in this mode unattended for a long time if you do not want to give criminals free access to it.
Advantages and disadvantages
Advantages characteristic of the power unit autostart option:
- Possibility to start driving in an already warmed-up car. The car owner can start the internal combustion engine remotely, while at home. By the time you start your trip, the engine will warm up.
- Save time. This advantage is especially noted by consumers who are late for work in the morning.
- The ability to operate the car even in severe frost. The presence of periodic starting will prevent the power unit from cooling to critically low temperatures. This helps reduce wear on the structural elements of the internal combustion engine, as well as increasing the service life of the engine as a whole.
Disadvantages of this option:
- High fuel consumption during autostart. When the power unit starts, part of the fuel flies into the pipe without benefit to the engine. If the power unit is started several times during the night, the consumption will be noticeable.
- There is a possibility of a dead battery. When the engine starts, the starter mechanism draws more battery current. This leads to its faster discharge. Therefore, before using the option, you must correctly configure the system. There is no need to set the engine running time to short; it should run for at least 10 minutes. 20 minutes. will be enough to replenish the battery charge.
- Adding to the complexity is that when starting the car, the car must be on the parking brake. You cannot leave the car at speed. In severe frost, especially if there was high humidity in the evening, the brake pads may freeze to the wheels. To prevent this, experienced car enthusiasts recommend pressing the brake pedal several times before using the parking lever.
- Lack of protection against theft when starting the internal combustion engine. To perform this task, the car owner needs to bypass the engine blocker. Therefore, it will be easier to steal a vehicle. Also, some alarm models disable the protective mode when autostart is activated. In the absence of security, an attacker can simply get behind the wheel and drive away.
