Low beam lamp Niva Chevrolet: which ones are installed on Chevy

A burnt-out lamp is one of the main reasons why the low-beam headlights stopped working on a Chevrolet Niva. Let's consider which light bulbs are standardly installed on a car of this model, how to choose the right replacement for them, what to look for when choosing and how to install it yourself, as well as what other reasons can lead to this malfunction.

3 Instructions for self-replacement

4 Low beam fuse Chevrolet Niva

5 Key findings

What headlights to put on a car

Thanks to the headlights and all the optics of the car, in conditions of limited visibility, the route and all objects on it are perfectly visible; in the dark, you can always illuminate the interior and other necessary parts of the car, and convey to other drivers the necessary information about what maneuver the driver is going to perform and what is being done on the road. road.
That is why a lot depends on the quality of the headlights of the VAZ 2121 Niva when driving, and each performs its own special function. A wide variety of lamps can be used in headlights. These are gas discharge, which come in the following types:

xenon - for low and high beam;
tungsten - inexpensive and with low light intensity;
halogen incandescent lamps, which are most common, serve as a source of low and high beam in the headlight.

But lately, drivers have preferred LED lamps, and not only for signaling functions, but increasingly as a source of head light. They are about 3 times brighter than halogen and xenon, and the light density is much better.

LED headlights are suitable for cars that have headlights of 7 inches, including the Niva.

The latest tuning headlights are easy to install, but over time, the need to replace the headlights of the VAZ 2131 inevitably arises, including the headlights for the Niva 21214.

Lately, more and more companies have been trying to boast excellent headlights on the automotive market.

But increasingly, VAZ 2131 drivers prefer headlights, which eliminate many problems that arise with headlights, and replacing them does not require much effort. These are wesem headlights with a 178mm reflector. They are bought and exchanged for standard ones.

They are perfect for models such as Niva 21214 and VAZ 2131 to adjust the head light or to replace standard optical elements. When purchasing wesem diode headlights, you will need to buy a lamp for it - 12 or 24 volts.

Wesem fog lenses. They have very clear boundaries of light - upper and lower, and this provides an excellent opportunity to configure them so as not to violate the rules of GOST, and not to blind drivers of oncoming cars with bright light. This optical element helps improve low beam. And even the appearance of the car immediately changes when such headlights appear on it.

Lighting system

Adjusting the headlights

Note

: The direction of the light beams of the headlights should be such that the road in front of the car is well illuminated, and oncoming drivers are not dazzled when the low beam is turned on.

Note

: Adjustment of headlight beams should only be carried out by qualified personnel at a workshop. Headlight adjustment is carried out using optical instruments. If they are not there, then adjustments can be made using the screen, as shown in the figure below.

horizontal line corresponding to the centers of the headlights;
a line passing through the centers of light spots;

A and B – vertical lines corresponding to the centers of the headlights;
O – center line;
h – distance of the centers of the headlights from the floor

1. The headlights are adjusted by rotating screws 1 and 2 shown in the figure below, which rotate the optical element in the vertical and horizontal planes.

screws for adjusting the headlight beam in the horizontal direction;
screw for adjusting the headlight beam in the vertical direction

2. Place a fully fueled and equipped car, with a load of 735 N (75 kgf) on the driver’s seat, on a flat horizontal platform 5 m from the screen (plywood panel measuring about 2x1 m, etc.) so that the axis of the car is on it perpendicular. Before marking the screen, make sure that the air pressure in the tires is normal, and then rock the car sideways to install the suspension springs.

3. Draw vertical lines on the screen: center line 0 and lines A, B, C and E passing through the points corresponding to the centers of the headlights. These lines must be symmetrical with respect to the center line of the vehicle. At a height h corresponding to the distance of the centers of the headlights from the floor, draw line 1 and 55 mm below it, line 2 of the centers of the light spots.

4. Set the headlight adjustment control on the instrument panel to a position that corresponds to the load of a car with one driver.

5. Turn on low beam. Sequentially, first for the right headlight (the left one is covered by something or is disconnected from the wiring harness), and then for the left one (the right one is closed), adjust the light beams of the headlights with screws 1 and 2 (see the figure above). In this case, the displacement of the light beam of the headlight should not exceed ±3° in the vertical plane and ±2° in the horizontal plane.

6. For correctly adjusted headlights, the upper boundary of the light spots should coincide with line 2 (see the screen picture above), and the intersection points of the horizontal and inclined sections of the light spots should coincide with lines A and B.

Replacing lamps

Block lights

Note

: Before replacing the lamps in the headlight unit, remove the protective cover 3 (see figure below), which is fixed with a wire holder 2. To replace the low (or high) beam lamp, remove the block 5, remove the antennae of the spring latch 6 from the grooves and remove the lamp 4.

1. Turn cartridge 1 counterclockwise and remove it from the socket.

2. Remove block 5 of the low beam headlights to gain access to the side light lamp.

turn signal lamp socket;
holder;
lid;
low beam (or high beam) lamp;
low beam (or high beam) lamp block;
latch.

Back light

Note

: Replace the bulbs in the rear light from the luggage compartment side, having first opened the valve in the side trim.

1. Turn socket 2 counterclockwise and remove it complete with the lamp. To remove the lamp from the socket, press it and turn it counterclockwise, as shown in the figure below.

lamp;
cartridge

–> Sources used:

https://svetilnik.info/avtomobilnyj-svet/lampa-blizhnego-sveta-niva-shevrole.html
https://lampaexpert.ru/avtomobilnye-lampy/neispravnosti/lampa-bliznego-sveta-niva-sevrole
https://polomkiauto.ru/lampy-ustanavlivaemye-v-chevrolet-niva-rekomenduemye-proizvoditelem.html
https://krutilvertel.com/vaz-2123-2001-glava10-sistema-osveschenija

Replacing a low beam lamp on a Chevrolet Niva

“Niva Chevrolet” is the first result of the joint efforts of the automobile concerns General Motors and AvtoVAZ. An all-wheel drive SUV with an elegant design and high performance characteristics is perfect for driving in domestic conditions. It copes well with roads that cannot boast of high-quality coverage, and even with those that do not have any coverage at all. Hunting, fishing, a picnic in the forest, a trip to the country - if you like to be outside the city, this model is just for you.

Driving in off-road conditions can result in damage to the front of the vehicle. The headlights are the part that suffers most often. This could be mechanical damage or simply a burnt out light bulb - this happens to all cars, and the Chevrolet Niva is no exception.

Before talking about how to replace the lamp responsible for the low beam in a Chevrolet Niva SUV, let’s clarify its type, and also remember the characteristics and features.

Chevrolet Niva low beam fuse

If the lamp still does not light after reinstallation, the cause may be a blown fuse. To check it, you need to open the mounting block located to the left of the steering wheel in the Chevrolet Niva interior. Low beam on the left is designated F2, on the right – F12.

In addition to this, other causes of the problem may be:

Poor quality contact connections. Their surface has either oxidized, or they are not firmly fixed and are loose.
There was a break in the electrical wiring on the path from the fuse box to the headlight.
The switch has failed. The snout for the low beam could also fly. As a rule, in this case the lamps on both sides do not light up.
The contact from the mass in the headlight block has become loose.

To determine the area of the break and fix the problem, you will need to diagnose the above locations using a multimeter.

Replacing a low beam lamp on a Chevrolet Niva

Chevrolet Niva is the most popular among budget SUVs. In addition to the comfortable body, the Chevy Niva has good characteristics. It turned out this way because it was developed for movement on domestic roads. As a result, the Niva can confidently drive not only on asphalt, but also on unpaved surfaces and off-road. The “poor old lady” Niva has many problems, but one of the biggest is the light, the optics on the Niva, which does not light up at all, this is what our article is dedicated to. Niva cars have their own peculiarity: the light shines somewhere, but not on the road.

In this case, damage to the front of the car can often occur as a result of stones or branches. First of all, headlights on a Chevy Niva suffer, as they are the most fragile part. Impacts can damage not only the housing, but also the lamps themselves. They can burn out as a result of damage to the spiral.

From the factory, the car comes with two types of light bulbs. H7 is used for the low beam of the Chevrolet Niva and H1 for the high beam. These lamps are able to provide good lighting at night due to the optimal placement of the filament point.

What types of lamps are there?

Lamps with different parameters are produced. So, they choose not only the brightness, but also the light temperature in order to get optimal lighting when driving on a wet road, in fog or on a snowy road.

The low beam lamp of the Chevy Niva standard H7 consumes 55W. You should not install too powerful ones, as there will be a risk of overheating of the lampshade and wiring. Also, when using such light sources, there will be an increased discharge of the battery.

In addition to the quality of light, they are also distinguished by the type of device:

LED
xenon
halogen

Initially, headlights for the Niva were developed to use halogen lamps. They are distinguished by low cost and good light. Usually this type is enough for many Chevy Niva drivers, since they have a good resource and do not require connecting additional expensive components.

The Niva Chevrolet low beam lamp is a glass bulb with a spiral enclosed inside. Gas is pumped inside, which slows down the oxidation processes of the spiral and maintains its condition longer. One of the disadvantages is the high temperature during operation. This affects the rapid failure of optical elements. But according to experts, this type of lamp is optimal.

Tail lights

Light tuning must be done very carefully so as not to be prohibited and not to violate traffic rules. When purchasing sidelights, you can also switch to new samples; they can be a more uniform color, yellow or white. The sidelights (headlights) on the Niva 21214 are also easy to change yourself. It is better to install sidelights on the Niva in a single color. Niva sidelights last quite a long time. Tail lights when driving a Niva are also subject to less damage and have a long wear life.

How to choose a lamp

There are a large number of offers on the market from manufacturers that have certain advantages

Therefore, first of all, you should pay attention to the features

First of all, it must have the following qualities:

comfortable and bright light
long service life
favorable price

You also need to look at the manufacturer. Lamps from well-known brands may be more expensive, but they will use high-quality materials.

Do not install lamps with increased functionality, for example, the most durable ones - this is usually achieved by reducing the brightness, which can be unsafe in the dark.

It is better to install standard taillights on the Niva, since other types do not fit into the grooves. The taillights are mostly the same.

LED headlights

To install such headlights on Niva 21214, you need to modify the standard places. To install Beijing headlights, it is necessary to enlarge the factory slots for installing headlights in order to install a rim that directly holds the headlight itself when driving. Then we connect the headlights to the terminals and check the lighting on the road.

Tail lights

Don't confuse the direction

In addition to head lighting devices, the machine is equipped with marker and turn indicators. Front and rear turn signals are equipped with PY21W elements. When in working condition, the lights glow with a bright yellow light, and when turned off they acquire a silvery tint. A suitable element for tuning.

The economical driver's solution

The power of halogen products is 55-60 W, and for LED products it is 5 or 21 W.

The mounting sockets are designed for incandescent lamp bases. So the devices are interchangeable. But diode sources have the following advantages:

A trip to the forest is an off-road route with shaking and vibration. In incandescent devices the bulb is fragile, in LED flashlights it is durable.
Incandescent lamps transfer 95% of the heat generated to the glass and base. Overheating leads to damage to the on-board network and head optics parts. C5W and W5W marker luminaires emit heat in operating condition, but the thermal energy is dissipated through the mounting substrate and does not affect the contacts.

Replacing a low beam lamp on a Chevrolet Niva

What types of lamps are there?

In addition to the quality of light, they are also distinguished by the type of device:

LED
xenon
halogen

Tail lights

How to choose a lamp

There are a large number of offers on the market from manufacturers that have certain advantages

Therefore, first of all, you should pay attention to the features

First of all, it must have the following qualities:

comfortable and bright light
long service life
favorable price

You also need to look at the manufacturer. Lamps from well-known brands may be more expensive, but they will use high-quality materials.

Do not install lamps with increased functionality, for example, the most durable ones - this is usually achieved by reducing the brightness, which can be unsafe in the dark.

It is better to install standard taillights on the Niva, since other types do not fit into the grooves. The taillights are mostly the same.

LED headlights

How to choose a lamp

There are a large number of offers on the market from manufacturers that have certain advantages. Therefore, first of all, you should pay attention to the features.

First of all, it must have the following qualities:

comfortable and bright light
long service life
favorable price

You also need to look at the manufacturer. Lamps from well-known brands may be more expensive, but they will use high-quality materials.

Tuning of optical elements of Niva 21214

In many cars, including those like the Niva 4x4, quite often it is necessary to replace only the glass on the headlight or the headlight reflector.

But if the contacts are completely burnt, and the headlight has acquired a cloudy color, then it must be changed completely. You can do the tuning yourself.

To do this, remove the headlight from the VAZ 2121 Niva, for which you need to remove the rim, and very carefully, so as not to damage it, remove the reflector. To do this, you will need to unscrew 3 screws and unscrew 4 bolts, then the housing can be easily removed. The steps are as follows:

after the Niva tuning is completed, mandatory light adjustment is necessary, and it is advisable that this work be carried out by a specialist;
if tuning of the VAZ 21214 Niva taillights was done, then you can connect them yourself;
only first you need to examine the rear light; it must have a seal in the area where the body and body come into contact;
if it is missing, a sealant is required.

Rear fog lights, after tuning has been done, are connected quite simply.

The plastic panels on the trunk are removed and the electrical connector is disconnected.

There is an optical element inside the body, and you need to unscrew the nuts that secure it. Install a new headlight by screwing it to the body. Now you need to connect the connector to the on-board electrical network.

There is such an excellent device for the VAZ 21214 - an electric corrector for headlights. It is designed to change the angle of the light beam depending on the load of the machine. This optical element includes a regulator that fixes the position of the headlights, several mechanisms that contain O-rings, and electrical wires. When installing it, it is secured like a regular hydraulic one. It is more reliable and can work in very cold seasons and when the air temperature is high.

https://www.youtube.com/watch?v=I2HkKqdiCog

Headlight glasses are installed on the Niva, usually they are transparent, made of polycarbonate, but there are special ones for lensed modules, with a 1-mm thickness - reinforced, which greatly increases their performance.

When tuning is completed, the optics should look perfect. Niva drivers often replace standard optics with xenon lenses. Some misunderstandings may arise in this case, as the headlight may turn out to be longer. In this case, the rear part is cut out, to which the headlight itself is attached.

How to replace lamps in headlights and lanterns of Lada Niva (Chevrolet)

During operation, the lamps in the headlights or rear lights may burn out.
You can replace them yourself. To avoid breaking anything, it is recommended that you read the instructions contained in the vehicle's owner's manual. Attention!

Wear gloves when installing a halogen lamp to avoid leaving marks on the lamp bulb.

Types of headlights

LED headlights

Niva 4x4 can be ordered from China. Diode headlights fit the Niva without any problems. The lamps are sent in a special box with an adapter, one for the H4 lamp, the other two small connectors for the circumference of the headlight, the so-called angel eye. For our region, you can take two colors, yellow and white, so that when you turn, the white color of the circle goes out and only the yellow color blinks. To install such headlights on the Niva 21214, you need to modify the standard places. To install Beijing headlights, it is necessary to enlarge the factory slots for installing headlights in order to install a rim that directly holds the headlight itself when driving. Then we connect the headlights to the terminals and check the lighting on the road. Of course, diode optics shine on the field an order of magnitude brighter than usual, which has a very positive effect on traffic.

Lensed headlights

They also have an angel's eye on the rim and a lens in the center. We buy a xenon lamp separately for the lens. The included H4 lamp does not shine at all, even worse than the factory one. Therefore, to achieve good light, you need to replace the new optics with the old one and insert an LED lamp inside, the light will be very good. But there is one big problem: such light is prohibited from being installed on our roads.

Crystal headlights

Hella on the field, size 169 mm. This headlight fits many 80's cars, such as Ford or Galenwagen. This headlight is universal and will fit even on a Hamer. The headlight is universal, but the quality differs from similar ones, since it was made in Germany, and Germans are Germans. The headlight has a chic amalgam, reflective properties are 92%, this is a very good indicator. The quality of light is incommensurate with our optics.

With all its advantages, the cost of the headlight is 1,700 rubles. For the headlight it is better to take a special lamp, also German H4+90, where plus 90 means an increase in light due to the overheated filament. Great focus and brightness appears. You can also add additional Komi 500 fog lights to the main Hella headlight, which fit perfectly with the main Hella headlights.

Fog lights 160 mm. They will be very useful for drivers who buy a Niva to cope with our modern reality. These headlights illuminate the roadside very well. Illumination diagonally 160 degrees, with a lighting range of 30 meters, a very decent distance for off-road conditions. The lamp kit includes both bulbs and real German wiring. Such a kit can be bought for around 3-4 thousand rubles.

LED headlights for the field

DRL mode, turn signal mode, smooth lighting of DRL and turn signal. Ice headlights are a new breakthrough in light on the field, 3 powerful LEDs that perfectly illuminate the road. Ice headlights are a new breakthrough for the Niva car. IP67 waterproof housing. Tuning headlights requires careful preparation for the Niva, but it is better to contact a service center. Optics for the Niva 21214 car, can be selected as desired.

All about low and high beam lamps on a Chevrolet Niva car

Replacing low beam lamps on a VAZ 2110 on your own

Chevrolet is a popular SUV in the budget segment. The car was developed taking into account long trips over rough terrain and adapted for the city.

Until 2009, lensless designs were used in head optics. Since 2009, the Niva Chevrolet low beam lamp is a single-filament halogen design with a power of 55 watts.

The luminous element is installed statically, which allows the use of a 99% reflective surface.

When replacement is necessary

The factory equipment assumes the installation of halogen class H7 12v/55W. The marking stands for:

base 7;
works from an on-board network of 12 volts;
power 55 W.

Low beam lamps provide comfortable lighting at dusk and provide optimal illumination in rain and snow. Since the Niva car is designed for driving on difficult roads, reinforced plastic is installed in the optics housing, which is less susceptible to scratches and chips.

During typical operation, the front part of the Niva is subjected to significant mechanical loads: shaking, driving over potholes, etc. Constant increased vibration reduces the life of the running lights. Part that will need to be replaced:

if the power of the element has decreased and the road is not illuminated enough;
the element flashes periodically;
The consumable is completely non-functional.

Change the bulbs in both headlights at the same time. After replacement, it is recommended to adjust the optics unit.

Lamp selection

Among the large assortment, it is easy to determine which lamps are on the Chevrolet Niva. The car is standardly equipped with a lamp with an H1 socket, 60 W for long-range lighting, and a halogen H7 standard, with a power of 55 W for low beam. The service life of each element is 3500 hours.

Optics from different manufacturers differ in brightness level and color temperature: white, yellow light. The lamps illuminate the road well in fog, rain, and snowfall.

The near-halogen lighting from Philips H7 12 55 has a precisely calibrated filament point placement, which allows for good visibility at night. Popular manufacturers of low running lights:

Osram H7 12;
Philips H7;
Bosch H7 55W.

General characteristics for all classes of low beam lamps:

service life more than 2,500 hours.
easy to install by yourself;
clear fixation of the light beam;
full power until the end of operation.

It is not recommended to install fluorescent lamps with a power of more than 55 W on the Niva: the lampshade may overheat and the wiring may burn out. In addition, the battery efficiency increases, the battery discharges 20% faster.

In addition to standard halogen ones, LED and xenon lamps are installed in Niva optics. When installing xenons, the wiring is completely re-equipped and an ignition unit is installed in the engine compartment. Replacing halogens with xenon and LEDs is prohibited by traffic regulations.

DIY lamp replacement

An advantage in car maintenance remains replacing the low beam lamp on a Chevrolet Niva yourself. The work takes up to 20 minutes both for self-installation and in a car service. To work you will need:

open-end wrench 10;
rags;
flashlight, mirror (if replacement is being done for the first time).

When replacing the optics, it is recommended to check the contacts and operation of the Chevrolet Niva fog lamp, which is also easy to replace with your own hands. The process of installing a new element step by step:

Using a 10mm wrench, unscrew the nut and remove the terminal from the battery.
Unscrew the washer reservoir clamps and move it to the side.
Clean the protective cover of the headlight unit.
Remove the cover.
Disconnect the lamp contacts and remove it from the housing.
Install new one.

To properly disconnect the contacts, pull on the connector, then disconnect the wire ends from the terminal. At the same time, the latch moves up, the spring latch moves back.

When installing a new consumable, proceed in the reverse order:

Hold the lamp only by the base.
Install the element exactly into the groove of the diffuser.
Tighten the latch.
Connect contacts.
Secure with latch.
Connect the wiring to the battery and check operation.

Self-replacement does not require any skills

It is important to follow the procedure for assembling or disassembling the headlight and not touching the glass with your hands. A microscopic fingerprint will remain on the bulb, which sooner or later will lead to incorrect operation of the optics

Information

Before replacing the glove compartment light bulb, be sure to remove the negative terminal of the battery, otherwise the instrument panel light may go out. The fact is that if you do not remove the negative terminal from the battery and start disassembling the glove compartment, a short circuit in the glove compartment illumination circuit is guaranteed - the cartridge contacts will inevitably be shorted to ground if you do not turn off the power to the car.

Even if we did not disassemble the glove compartment, but the side lighting and instrument lighting disappeared, with a high degree of probability the wiring harness leading to the switch and to the glove compartment illumination could become frayed and shorted, which would also cause a short circuit and blown fuse F He is responsible for the rear fog lights.

If you do everything correctly, the dimensions will light up again.

We find the cause and restore the light Rear fog lamp fuse. What do the glove compartment and rear foglights have to do with it?

If a short circuit occurs in the circuit, it is this fuse that blows, which supplies power to the main battery block fuse. This fuse is marked ef1 with a rating of 30 A and is installed in the mounting block under the hood of the car.

In addition, it protects circuits F13, F14, F15, F16, F21, F22, F23 and F24, and these circuits contain the side lights and dashboard lights. Check algorithm for a Chevrolet Lacetti Therefore, to eliminate the problem, we do the following: Check whether the glove box illumination works.

If it doesn’t work, we disassemble the glove compartment after first removing the negative terminal from the battery, connect the power wires to the switch and the light bulb, if necessary, look for an open circuit or short circuit and fix the problem. First, look at the glove compartment lighting. We check the integrity of fuses F4 and F6, they are located on the left, at the end of the front panel in the cabin, in the interior mounting block.

If necessary, we replace them with equivalent ones with a nominal value of 10 A. Diagram for switching on fog lights: On cars, in a variant version, fog lights can be installed in the front bumpers.

The diagram for switching on fog lights is shown in Figure 9. The headlights are turned on by switch 3 using an auxiliary relay of type 4. Fog lights can only be turned on if the external lighting is turned on by the switch.

Scheme for switching on the rear fog lights: The switch-on diagram for the rear fog light is shown in Figure 9. Lamps 3 of the fog light in the rear lights are turned on by switch 4 through the control unit of the APS-6 car anti-theft system only if the headlights are turned on and the corresponding key of switch 2 of the external one is fully pressed lighting.

When the side lights are turned off, the rear fog lights turn off automatically. External lighting switching diagram: External lighting switching diagram is shown in Figure 9.

The side light is turned on by switch 6 of the external lighting. Power for the side light and brake light lamps is supplied through relay K1 for monitoring the health of the lamps. If the lamp health monitoring relay is not installed in the mounting block, then instead of it there should be contact jumpers, shown by arrows in Figure 9.

Low and high beam lamp for Niva Chevrolet - replacing fog lamp bulbs

Replacing it yourself does not require any skills. It is important to follow the procedure for assembling or disassembling the headlight and not touching the glass with your hands. A microscopic fingerprint will remain on the bulb, which sooner or later will lead to incorrect operation of the optics.

Expert opinion

It-Technology, Electrical power and electronics specialist

Ask questions to the “Specialist for modernization of energy generation systems”

Replacing lamps Niva VAZ 21213, 21214, 2131 lada 4×4 Even if we did not disassemble the glove compartment, but the side lighting and instrument lighting disappeared, with a high degree of probability the wiring harness leading to the switch and to glove compartment light, which will also cause a short circuit and blown fuse F. It is responsible for the rear fog lights. Ask, I'm in touch!

Replacing Chevrolet Niva headlight bulbs - low and high beam, dimensions and direction indicators

Replacing Chevrolet Niva headlight bulbs can be caused not only by burnout, but also by replacing serviceable bulbs with new ones with different characteristics.

Naturally, few people want to send their car for service, waste time and pay specialists to perform this operation, just as in the case of fog lights.

That’s why it’s worth figuring out how to do everything yourself. In this case, the work is demonstrated using the example of the right headlight. As for the left, everything is done the same way.

Diagram of how to connect correctly

If you have a question about how to connect correctly, below is a diagram of how to do it correctly.

This device is your guarantee of safe driving on roads with poor visibility. And even if for some reason they are missing from your SUV, you can always complete it, since everything is provided for this in it.

Chevrolet Niva is definitely a foreign car 2 How to install fog lights. repair results.

Installation is much easier if you remove the wheel. The wiring with a chip is brought out for connection through the underwing holes of the body to the front bumper. I didn’t cut it, I just rolled it up and hid it behind the fuse box.

Now you can remove the latter from the housing, for which you need to turn it counterclockwise. The light from a xenon lamp pierces even thick fog due to the intensity of the flow. By the way, the “-” wires seemed to be short from the standard kit, it was a shame that I had to increase the missing 10cm.

Mon Jun 03, A — the “-” button backlight is missing. The preparation includes ready-made wiring, places for installing relays, buttons and a place on the bumper.

I didn’t get into the fuse box only because it was too difficult to disassemble it. I hung the extra relay plug from the kit; there is just the right place for it. Then everything follows according to the scheme, if anyone is interested. Plug 1 Ш1 of the fuse block has 8 contacts. A useful option for safety. Chevrolet Niva fog lights are not present in all trim levels - the L and LC versions do not have them.

If this useful option is not available, the car can be completed by contacting a dealership or any other specialized service. It definitely won’t be superfluous, since sacrificing your safety is a thankless task. We crawl to the mounting block. We simply insert the yellow cable with the already crimped female terminal into the empty slot in the relay block.

Step-by-step replacement of lamps

Having prepared everything you need, you can safely begin replacing the low beam sources on the Chevrolet Niva in the following sequence:

Using a 10mm car key, unscrew the negative terminal on the right side of the battery.
The glass washer tank is removed from its place and moved to the side.
The protective casing is cleaned of debris and dust and carefully removed.
Slowly pull back the base of the lamp base to disconnect the contact.
After applying slight pressure, you need to slide the lock up and immediately release it. This step will help to fully open the latch.
Taking the old lamp by the base, we remove it from the so-called socket.
When inserting a new lighting element in place of the old one, you need to hold it only by the base, making sure that your hands do not touch the bulb. If contact does occur, the flask must be wiped with a clean rag soaked in alcohol.
Using a small mirror, check whether the base fits into the groove provided in the diffuser.
When installed correctly, the base is secured in place using a clamp.
The contacts are put into place, the protective casing is also installed in its original place.

Low beam lamp for Chevrolet

Low beam headlight.

From the factory, this car is equipped with halogen bulbs H1 and H7 (H7 - low beam, H1 - high beam). Due to the fact that they have a fixed gap between the flange and the spiral, this allows you to create a good filament point that will provide good light in the dark.

The H7 light bulb can operate at a voltage of 55 W. But today there are other types of them that can operate from increased voltage. These bulbs are recommended for use only in SUVs.

Light sources can be of three types:

LED.
Xenon.
Halogen.

Xenon bulb standard H7

Halogen bulb standard H7

LED bulb standard H7

In the Chevrolet Niva, as already mentioned, mainly halogens are used. Their difference: low cost, as a result of which they are popular among drivers. They also provide good illumination of the space in front of the car and do not require the use of any other devices to operate.

The lamp consists of a bulb made of hard-alloy glass. Inside it there is a filament and gas. The disadvantage of such a lamp is the high temperature during operation. This can also cause the optics to wear out faster. Nevertheless, experts say that H1 lamps are the optimal solution for cars such as the Chevrolet Niva today.

Main conclusions

On a Chevrolet Niva car, the low beam headlights use a standard H7 12V/55W lamp. It has one filament and is installed in the corresponding block. When choosing a new copy to replace a burnt-out one, you need to pay attention first of all to its type and lighting characteristics. Based on the type of light source, they are divided into the following modifications:

Incandescent light bulbs.
Standard halogens.
Halogen with quartz bulb.
Xenon.
Light-emitting diode.
Gas discharge on sodium.

It is better to give preference to halogen ones, since they have a minimal price, good luminosity and flux density and do not require the installation of additional equipment when replacing. In addition to the burnt-out lamp itself, the reason why the low beam on a Chevrolet Niva stopped working could be a fuse and problems with the on-board wiring.

If you have additional information about choosing and replacing low beam lamps on a Chevy or simply want to share useful knowledge, be sure to write in the comments.

Source

Tuning ideas

Tuning Niva Chevrolet headlights and flashlights allows you to give your car an attractive, individual appearance. Alternative optics can change a car beyond recognition. The stylish look of the car is given by headlight covers, trunk spoilers, and door sill covers.

As for optics, there are many opportunities to tune your car. This does not involve large costs. For example, to give the car a more aggressive look, the front optics are darkened. An option for tuning headlights for Chevrolet are angel eyes or eyelashes, this is achieved using headlight covers. The covers give the car an original look.

Tail light covers

One of the options for tuning lighting is to replace the standard optics with an alternative one, headlight lining. Xenon is installed in the headlights; LED lights are often installed in PTFs. If xenon optics are installed, then it is necessary to equip the car with headlight range control. The headlight range control is used to adjust the light.

Tuning includes installation of DRLs

The use of LEDs in a brake light increases safety, since the LED light attracts attention. To protect the Chevrolet Niva headlights and radiator, many drivers install a grille. Do you change the optics on a Niva Chevrolet yourself?

Do you change the optics on a Niva Chevrolet yourself?

Survey

Loading …

Lamps used in cars

For classic Niva Chevrolet

Name	EEC designation	Power, W	Position
Headlight block:
high beam lamp	H1	55	2
low beam lamp	H7	55	3
side light lamp	W5W	5	10
front turn signal lamp	PY21W	21	5
Fog lamp bulbs	NZ	55	1
Side turn signal lamp	W5W	5	10
Back light:
reverse lamp	P10W	10	7
fog and side light lamp	P21/4W	21/4	6
turn signal lamp	PY21W	21	4
brake light	P21W	21	5
License plate lamp	C5W	5	8
Engine compartment lamp (under hood)	P10W	10	7
Trunk light bulb	C5W	5	8
Interior lamp	C5W	5	8
Glove box lamp	C5W	5	8
Instrument cluster illumination lamp	W1.2W	1.2	11
Instrument cluster indicator lamp	W1.2W	1.2	11
Individual ceiling lamp	T4W	4	9
Cigarette lighter lamp	W1.2W	1.2	11
Heater control unit illumination lamp	W1.2W	1.2	11

For Lada Niva Travel

Block headlight
• high beam lamp	H1 55W
• low beam lamp	H7 55W
• turn signal lamp	PY 21W
• DRL and side light lamp	W21/5W
Front fog lamp	H11 55W
Back light	LEDs
Additional brake signal	LEDs
License plate light	W5W
Individual lighting lamp	LEDs
Interior lamps	LEDs
Side turn signal lamp	W5W or WY5W*

*If the side indicator is used in orange color, use W5W. In the case of using a yellow-colored ocular pointer, use WY5W.

Video

Source

Selecting lamps for low beam

So, we choose between standard lamps and lamps with increased brightness or service life.

DiaLUCH H7-12- 55 12557 from 90 RUR (China)
LIGHTHOUSE H7-12- 55 52720 from 80 RUR (China)
VOSKHOD H7-12-55 80517 from 75 RUR (China)
PHILIPS H7-12-55 +30% Vision 12972PRC1 from 240 RUR (Germany)
KOITO H7-12- 55 W Other Brand 0701 from 320 RUR (Japan)
GE H7-12-55 58520U from 170 RUR (Hungary)
NARVA H7-12-55 48328C1 from 160 RUR (Germany)
OSRAM H7-12-55 64210 from 180 RUR (Germany)
BOSCH H7-12-55 Pure Light 1987302071 from 170 RUR (Germany)
EVO H7-12-55 VISTAS 3200K 93367 from 120 RUR (China)
AVS H7-12-55 Vegas A78143S from 90 RUR (China)

If there is not enough light from standard lamps, you can install lamps with increased light output

PHILIPS H7-12-55 +150% RACING VISION 3500K from 1000 rub. (Germany)
PHILIPS H7-12-55 +130% X-TREME VISION 3700K from 900 rub. (Germany)
GE H7-12-55 +90% (PX26d) Megalight Ultra set 58520SXU from 700 rub. (Hungary)
NARVA H7-12-55 +110% RANGE POWER set 48062S2 from 1200 rub. (Germany)
AutoSvet H7-12-55 +80% More Light (Px26d) 32720ML+80 from 200 RUR (China)
BOSCH H7-12-55 +90% set 1987301075 from 900 RUR set. (Germany)
VOSKHOD H7-12-55 (PX26d) Super Nova +100% 80517 from 650 RUR (China)
DiaLUCH H7-12- 55+100% PX26D 5000K EcoLight Sirius 12557 ELS DUO from 600 RUR (China)
OSRAM H7-12-55 +110% NIGHT BREAKER UNLIMITED from 1300 RUR (Germany)
OSRAM H7-12-55 +130% NIGHT BREAKER LASER set 64210NBL_HCB from 1400 RUR (Germany)

Above is a large selection of lamps, which will make the low beam on a Chevrolet Niva better. However, it should be remembered that the service life of such lamps is lower than that of standard lamps.

Read more: Turn signals do not light up 2114