Wheels on the VAZ 2107: sizes and parameters of cast and forged wheels on the VAZ 2107

In recent years, life in Russia has changed dramatically, and the arrival of various official dealers of world-famous foreign car brands, as well as the availability of car loans, have done their job - the volume of foreign cars sold began to exceed the number of domestically produced “iron horses” sold.

However, the fact that the famous flagship of the AvtoVAZ concern, 2107, was produced from 1982 to 2012, that is, for 30 years, suggests that Russians have not lost their love for Russian car brands.

Along with sales and service of “Zhiguli”, to this day you can find various accessories for “classics” on the shelves of car shops, including rims.

Wheels for VAZ 2107

Despite the fact that the model was produced for many years, and it would seem that the restyled versions should have differed greatly from each other over time, the wheelbase, body shape and other exterior parameters remained unchanged.

Wheel rims on the VAZ 2107 in the factory configuration have the following parameters:

VAZ 2107

• The standard drilling for VAZ products, or the diameter of the mounting hole on the axle shaft of the car, is 58.5 mm, as well as the bolt pattern - each hub is attached to 4 studs of 98 mm each. This is a fairly universal size, because many European manufacturers of wheels, which are installed on most economy-class cars, often use the 4×100 dimension, which is fully compatible with the products of the Russian plant.
• Over the past 30 years, the concern has installed “classic” car wheels on its cars in the simplest configuration with the dimension 5J × 13 ET29 in a stamped version and without hubcaps, on which 165/80/R13 and 175/70/R13 tires were easily installed.
• More expensive modifications were equipped with 5.5J × 12 ET32 wheels and 175/65/R14 or 185/60/R14 tires, slightly increasing the disc offset so that the visible part of the wheel did not protrude beyond the transverse dimensions of the body.
• Wheels 15 on 2107 are a special “highlight” of the models of the first years. All these years, the plant installed wheels with parameters 6J × 15 ET25 and, accordingly, tires 185/55/R15 or 195/50/R15 on the top-end configurations, and this was the maximum that Russian engineers were able to achieve.

Stamped wheels on a VAZ 2107 Almost all car enthusiasts, immediately after purchasing a car, additionally purchased and installed special decorative plastic linings on the wheels, produced in abundance by the same manufacturers that supplied “stamping” to the AvtoVAZ concern. However, some of the most demanding and wealthy clients often resorted to more expensive products and drove on cast and even forged wheels.

What wheels are suitable for the VAZ 2107 in a non-standard version?

Any manufacturer will always recommend for installation as an option exactly the same dimension that he sets himself, since when using it he can guarantee the operation of the car without any risk of mechanical failure. This means that when developing the model, all calculated loads were taken with these wheels, and other parameters can harm the car.

AvtoVAZ allows the following options for replacing disks for the VAZ 2107:

• If a driver wants to change all 4 standard wheels on a car, and their original radius was R13, he should consider “stamping” or “casting” with dimensions of 5.5J × 13 ET32 or 6.0J × 13 ET32, which will be especially convenient for installation of winter tires, which should be slightly wider than summer tires to increase the specific area of ​​adhesion to the road surface. Tires suitable for this size are 175-195/70-80/R13.
• When a car enthusiast prefers a 14 radius, but for some reason he is not satisfied with the factory size, he has the opportunity to use the 6.0J × 14 ET32 size and tires with a width of up to 195 mm and a profile height of at least 60 mm on his Lada. These characteristics are so universal for VAZ that you can install all-season tires on them and not spend extra money on seasonal re-shoes.
• When a car owner sets the radius to R15, he should still adhere to the factory size, changing the rim width to a maximum of 6.5J or the overall tire size to 205/50/R15, since otherwise he will not be able to do without modifications to the suspension, or the deadline car service will be significantly reduced.

Alloy wheels for VAZ 2107

In some cases, some car enthusiasts prefer to install alloy wheels with dimensions R16 or R17 on their “Seven” cars, but this inevitably increases the overall width of the wheel and its offset (ET). This leads to the need to strengthen the suspension elements and the use of low-profile tires, which do not work well on country roads or in winter.

In order to choose the right stamped or cast wheels for a VAZ 2107, drivers should not go beyond the limits of wheel offset ET23-34 mm, width 5.0J-6.5J, and also should not set the radius above 16. In addition, you must carefully observe bolt pattern and drilling pattern upon purchase, as this is the main indicator of compatibility.

Parameters of forged wheels on VAZ 2107

The most practical and wealthy Lada owners install forged wheels on their cars, which have undoubted advantages over casting and stamping.

Forged products, having high strength, weigh much less than analogues made from other materials, and their special structure and hardening method during manufacturing prevent microcracks from forming in the material when hitting a serious obstacle.

Compact wheels - radius R13 and R14 - should be purchased only in the ranges described above: 5.0J-6.0J × 13 ET29-32 or 5.5J-6.0J × 14 ET32, which is suitable primarily for installing winter tires on change to larger rims for high-speed driving around the city on larger wheels.

Most cars produced before 1992 had tube tires, and it will not be possible to save old tires, even if they were just lying in the garage without use, because all the “forging” is oriented exclusively for tubeless tires.

Medium-sized forged wheels are an ideal combination with high-quality 15-radius tires, since the all-season version will allow you to operate the car for many years without worrying about the wheels at all.

The permissible size of disks can reach 5.5J-6.0J × 14 ET29-32.

Those drivers who dream of wide rims can set the size to 6.5J with a 23 mm offset, but they need to be prepared that the front wheels will definitely catch on the fender liner when cornering.

Forged wheels for "seven"

Forged wheels with parameters R16 and R17 are considered exclusive to the VAZ 2107, which are most often installed on later Lada models, such as Priora, Kalina, Largus and others.

This means that, of course, this drilling and bolt pattern is available on the market, but the small wheel arches of the “seven” can only be used for wheel sizes 6.0J-7.0J × 16-17 ET23-34, and this is the maximum range of parameters.

It is quite difficult to select such wheels, since they most often have an offset that is not compatible with the “classics”.

With a maximum tire width of 215 mm, the wheels, of course, will look very advantageous on the road, but at the same time they will most likely touch the calipers, which will require their processing, or, conversely, they will protrude beyond the body. In such situations, the driver will have to install additional plastic protection around the perimeter of the wheel arches on the body to prevent it from quickly becoming dirty on a rainy day.

Those who like to highlight their “seven” in the general traffic flow should be reminded that when installing forged wheels on 17, the maximum profile height is only 40 mm, which is popularly called “insulating tape”.

This means that the lack of an air buffer between the rubber and steel on the suspension part of the car often leads to the transfer of vibrations from the road to the hub, suspension, frame and interior of the car, which not only causes driver discomfort, but also reduces the period of maintenance and routine maintenance. repair work.

Acceptable parameters of non-standard disks

Tuning of the VAZ 2107 is carried out based on the design parameters of the car. The pursuit of stylish design should not be in dissonance with the requirements of safety and comfort.

The table below illustrates some selection criteria (standard indicators are highlighted in bold):

WheelTire Bolt patternPressure, bar

The central hole for the VAZ 2107 should have a diameter of 58.5 mm. The use of larger discs is possible using a special adaptive ring.

Connoisseurs of extreme design and low profile should take into account the permissible limits of experimentation:

• disc diameter from 13 to 15 inches;
• reach 24-34 mm;
• rim width 5-6 inches;
• central hole 58.5 mm;
• The bolt pattern is strictly 4x98.

When choosing an offset, you need to remember that wide rims require a smaller offset value.

In exceptional cases, extreme sports enthusiasts install products with different bolt patterns and central holes, but this is possible when replacing individual parts of the car (hub, brake drum). Experts do not recommend making changes to the design features of the car.

Knowledge of the design features of the VAZ-2107 and compliance with technical operation standards allows you to choose attractive wheel models without reducing the technical characteristics of the car and threatening driving safety.

Choosing wheels for a VAZ 2107

The choice of wheels for the VAZ-2107 is important for car owners. Properly selected tires provide stability and controllability, fast acceleration and easy braking, smooth ride and safety on the road. They receive torque from the car's engine and contribute to the movement of the vehicle due to traction.

A brief overview will help you figure out what kind of wheels and tires to put on the “seven”, how seasonality affects the choice of wheels, and what type of tread is best suited for different weather conditions.

Disk options

When choosing wheels for a VAZ 2107, strength, balancing and wheel sizes are taken into account. The main parameters that people pay attention to when purchasing are radius and width. The manufacturer equipped the car with standard wheels marked 5Jx13H2 ET29. The numbers and letters indicate the following:

• “5” – rim width, in inches;
• “J” – profile;
• “13” – disc rim diameter, in inches;
• “H2” – number of humps on the wheel rim;
• “ET” – letter designation of wheel rim offset;
• “29” – rim offset, in mm.

Valid disk parameters are:

1. The number of holes and the diameter of the circle on the wheel rims (bolt pattern) is 4x98 mm.
2. Hub diameter – 58.5 mm.
3. Rim diameter – 13-15”.
4. Wheel offset – 15 – 30 mm.
5. Recommended width is 5.0-6.0”.
6. Fastening elements – M12x1.25.

It is better not to install wider rims on the “seven”. You need to select the appropriate tires for them. They are larger in size than the size of the fender liners, and can touch or rub against the structural elements of the car.

Consequences of installing wide disks:

1. Rapid contamination of the side parts of the machine.
2. When the wheels turn, they rub against the side member and wings of the body, which leads to intense wear and damage to the car.
3. While driving, the tires can touch the brakes, and this can lead to an accident on the road.
4. Increased wear on wheel hub bearings, as they will bear more load.

Discs with a small rim offset (the disc will protrude more outward from the car) are also not installed. The hub bearing takes on most of the load, so it can quickly fail or jam.

Discs are divided into forged, stamped and cast. The “seven” is equipped with stamped steel wheels by the manufacturer. They have an average safety margin, are inexpensive and have a long service life. The disadvantage of the equipment is the need for periodic rust treatment, which leads to a rapid loss of appearance.

Do-it-yourself replacement of VAZ 2107 springs

Particular attention is paid to the 4x98 bolt pattern. The rim has 4 holes for mounting bolts that secure it. The diameter of the circle with holes is 98 mm. The distance between the centers of two closely spaced mounts for the VAZ 2107 is 69.3 mm.

In discs used on foreign-made cars, the bolt pattern is 4x100, the distance between centers is 70.7 mm. When installing such imported equipment on a VAZ, an error of 1.4 mm appears, due to which the disk is not secured and is quickly damaged.

Therefore, car owners use studs, extended bolts, spacers and eccentrics as fastenings. Incorrect installation leads to imbalance and vibration, wheel fallout and further accidents.

The best option is the wheels recommended by the manufacturer - R13, R14 and R15. They can also be mounted on all classic VAZ models, starting from 2101.

Standard tire parameters

The base tires on the VAZ 2107 are designated 175/70R13 82T, which stands for:

• “175” – tire profile width, in mm;
• “70” – ratio of profile height and tire width, in%;
• “R” – radial type;
• “13” – tire diameter, in inches;
• “82” – tire tonnage, 470 kg;
• “T” – highest sustained speed, 190 km/h.

In addition to the standard tire size R13 82T with a height of 70% of the width, the manufacturer recommends installing tires with a width of 165 mm and wheel size 80R13 82T. Standard elements are low-profile, with a 1-layer steel cord breaker to reduce rolling losses.

When choosing, take into account the following factors:

1. Tires with a lower profile often lead to wheel defects when hitting a pothole.
2. Rubber with a larger profile does not fit into the wheel arch and constantly rubs.
3. Non-standard profile height affects rim length and speedometer speed measurements.
4. The maximum wheel size may be larger than the standard, for example R14, R15 and R16, when upgrading a car and converting it into an SUV or sports car, but the tire parameters must match the wheels in terms of bolt pattern and offset, and not touch when turning.
5. An underestimated speed index leads to rubber destruction at high speeds.
6. Tires with low loads burst when hitting an obstacle while the vehicle is fully loaded.

Choice of tires by season

Tires on the VAZ 2107 are divided into summer, winter and all-season. For year-round use, drivers use all-season tires with the All season designation or with the inscription Tous terrain on the side. The performance of the “Seven” on such tires is satisfactory in any weather conditions, but in summer they are worse than summer tires, and in winter - winter tires.

Freelance options

VAZ-2107 cars are equipped with stamping, which has certain advantages and disadvantages. Stamped discs serve for a long time and reliably, bend and do not burst upon impact, and can be easily repaired even at home. Such models are easy to use, affordable, and do not attract the attention of intruders. However, the relatively large weight increases fuel consumption, makes acceleration and braking difficult, and creates inconvenience during installation and dismantling.

We recommend: Oil filter VAZ 2114: original, analogue, how to distinguish a fake, replacement

Innovative light alloy models are divided into 3 categories based on their manufacturing method:

• cast;
• forged;
• prefabricated

Cast ones are made from alloys based on aluminum or magnesium, which allows them to reduce their weight by a third compared to standard versions. The fragility and inelasticity of the material upon impact leads to chips or even bursting of the wheel.

Forged products are distinguished by increased strength and lower density due to hot stamping technology. Deformation requires a lot of force, but the inflexibility of the material forces the suspension to take on the full force of impacts when driving on a bad road.

Prefabricated ones consist of 2-3 segments fastened with bolts. You need to pay special attention to the fastening material. Steel bolts rust quickly, titanium bolts do not corrode. Components can be manufactured using different methods and from different materials. This technological solution makes it possible to reduce weight, increase the interchangeability of parts and the maintainability of products.

VAZ 2107 tires: features of operation and storage

Safety on the road directly depends on the condition of the wheels of the “Seven”. Therefore, you need to take a responsible approach to the choice of wheels and tires, monitor the condition of the tread and tire pressure. To do this, you need to know the parameters of the wheels, the nominal tire pressure, and the type of tread suitable for specific weather conditions.

Bolt pattern VAZ 2107

The first thing you need to pay attention to when installing wheels is the bolt pattern of the VAZ 2107. The design of the “seven” provides for the wheel pattern “98x4” - fastening with four bolts, the holes of which are located on a circle with a diameter of 98 millimeters.

Many foreign cars have a close bolt pattern - 100x4. In the first case, the distance between the centers of the bolts is 69.3 mm, in the second - 70.7 mm.

An error of 1.4 mm does not make it possible to properly fasten a “non-original” disk, which over time will lead to damage to the disk, bolts or mounting holes.

There are ways to attach 100x4 wheels to a VAZ 2107 using studs, eccentrics, spacers or extended bolts. But all of them either worsen the reliability of fastening or complicate it unnecessarily. Unless absolutely necessary, it is better to install “native” disks. Improper wheel mounting can cause imbalance and vibration, and in the worst case, a wheel falling off while driving can cause an accident.

Tire pressure VAZ 2107

The nominal tire pressure depends on the type of tire and the load on the vehicle. If the wheels are overinflated or low, the contact patch between the tire and the road changes. This causes deterioration in controllability and an increase in braking distance. In addition, uneven accelerated wear of the tread begins. Over-inflated tires increase wear on the center of the tire, while under-inflated tires increase wear on the edges.

It is recommended to check tire pressure after 500 km, but in practice it is better to do this more often. Small tire punctures, disc and spool defects cause air to escape from individual tires. In this case, the car may drift off course, especially when braking.

The nominal pressure in VAZ 2107 tires depends on the tire size:

• 165/80R13 - 1.6 for front, 1.9 for rear wheels;
• 175/70R13 - 1.7 for front, 2.0 for rear wheels.

In hot weather and when driving, tire pressure increases. With an aggressive driving style, taking sharp turns at high speed, the pressure can increase to 3-4 atmospheres.

The tire material is designed for this and can withstand such changes. But if there is a hernia or cut on the tire, it may explode.

A front tire explosion is especially dangerous, after which it is very difficult to keep the car on the road.

As pressure decreases, rolling resistance increases, which leads to increased fuel consumption. The tire also bends and the car becomes less responsive when maneuvering.

If the tire pressure is too low, the tires may even fall apart when cornering sharply.

Tire selection and storage

• The tire type must be appropriate for the season and road surface conditions. When the average daily temperature is below 5 degrees, you should switch to winter tires, and when it is warmer, to summer tires.
• Summer tires harden at low temperatures and lose grip on the road surface. Winter ones wear out intensively at high temperatures.
• You should not buy studded winter tires if you have to drive on city streets cleared of snow without leaving the city. The studs are good on snow and mud, but do not perform well on asphalt.
• Before storage, tires must be cleaned of dirt and washed.
• Tires should be stored upright on the floor or rack without any sharp edges that could damage the rubber.
• It is unacceptable to store tires hanging from the inner surface - in this position, the edge of the tire adjacent to the rim will be deformed.
• Do not store tires in direct sunlight or outdoors.
• It is unacceptable to place heating devices near tires.

Source: https://semerkavaz.ru/raznoe/obsluzhivanie-shin-na-vaz-2107/

Minimum and maximum possible parameters of non-standard disks

So, the smallest disk diameter provided by the VAZ-2107 manufacturing plant is 13 inches. The maximum size should not exceed 15 inches, provided that low-profile tires are available.

The wheel rim must either correspond to the parameters of the VAZ-2107 hub according to PCD - 4x98 mm and according to DIA - 58.5 mm, or its installation will require the use of special adapter spacers. The product with PCD – 4x100 mm can be installed using fasteners with an eccentric.

You can try to get around the 5J-6J rim width limitation by changing the “ET” value. The use of spacers will reduce the size of the offset, which will allow the installation of wider wheels. But the question immediately arises about the appropriateness of these actions.

Giving a more modern look to any older car model is quite appropriate and acceptable in most cases. Changing disks in this sense is no exception. However, if you are carried away by tuning the VAZ-2107, you should not forget about the technical characteristics.

Any re-equipment must be accompanied by an improvement in both appearance and performance. Or at least you should try not to spoil what was originally there.

Sources

• https://kolesa.guru/diski/i-na-vaz-2107.html
• https://zapchasti.expert/kolesnye-diski/diski-na-vaz-2107.html
• https://mosautoshina.ru/auto/vaz/2107/
• https://bumper.guru/klassicheskie-modeli-vaz/kuzov/diski-na-vaz-2107.html
• https://kolesospec.ru/diski/modeli-avto-diski/diski-vaz-2107.html

Features of wheel sizes for the most popular VAZ models

Among several dozen VAZ modifications, the most popular models over the entire 50 years were only 2 of them, as can be judged by the number of copies sold. The wheel sizes for these cars had the following parameters, which varied depending on the year of manufacture, technical equipment and equipment of the car:

VAZ is the latest modification of the “classic”, produced on the plant’s conveyors for 30 years: from 1982 to 2012. During this time, it never changed its appearance, and the disc bolt pattern was the same - 4x98 with a central hole diameter of 58.6 mm.

The width of the rim varied slightly depending on the model year.

If in 1982 the plant produced models with tire dimensions ranging from 5J to 5.5J, then at the end of production the concern increased the permissible size to 6J.

You might be interested in Domestic alloy wheels for cars

The radius of the wheels invariably varied from R13 to R15, which made it possible to alternate them by season, periodically changing the side profile of the tire, or immediately use all-season tires with a diameter of R14.

The VAZ 2107 tire size invariably consisted of only 3 main parameters - 175/70/R13, 185/60/R14 and 185/55/R15. The last of the listed parameters was actively in demand among lovers of fast driving on smooth city roads.

On a note.

As for the R13 rubber, it allowed the driver to feel as comfortable as possible when driving over rough terrain, as well as in winter, when the high cord profile took part in adhesion to the road surface. But the most popular parameter remained the universal size R14 and the largest number of tires were sold in this dimension.

If we look at the concern’s earlier cars, we can see that the wheelbase of the Zhiguli has remained virtually unchanged for more than 40 years. This leads to moral backwardness of the technical equipment of the plant's products. At the same time, the lack of new developments greatly reduces both the speed of release from the assembly line and the cost of engineering equipment, which leads to a very attractive retail price for the vehicle.

VAZ 2114. Produced in a smaller range - from 2001 to 2013. The car was just a restyled modification of the classic “nine”. The legacy of the outdated model did not affect the high popularity of this Lada, and all the wheels that were installed on hubs in the basic version had the same traditional bolt pattern 4x98, DIA 58.6 mm.

European standard bolt pattern 4x100 for Lada X-Ray

Like the bolt pattern of the VAZ 2114, the width of the wheel rims was not much different from the “seven” and fluctuated between 5J – 6J for the entire production period. As for radius, the concern has completely eliminated the 15-inch diameter from the factory equipment, without prohibiting drivers from installing this parameter as an option. The bolt pattern of VAZ 2114 wheels in the current size also made it possible to install standard 4x100 wheels in accordance with the sizes usual for Europe.

Not a single Lada model has ever looked aggressive; the hallmark of the product was practicality and reliability in operation. The concern did not use extreme overhang indicators, and the wheels were always hidden under the body arches. The average ET limit values ​​for both VAZ 2107 and 2114 were ET25...35 mm, and deviations from this characteristic obligated drivers to install additional mudguards on the side parts of the body and change the design of the hubs, making them more durable to avoid deformations.

Important!

The bolt pattern of the VAZ 2114 wheels, as well as all other dimensions of the hub and disks, were used on the brand’s followers - Kalina and Priora. With the arrival of new management at the domestic concern, this parameter ceased to exist altogether, since the plant had a new orientation to the West and possible import of products to the nearest CIS countries.

5 studs on VAZ 2121 wheels

Wheel functionality

In front-wheel drive cars, the disk transfers revolutions to the drive pair. The tire fits tightly on it. The front suspension becomes stiffer due to the correct placement of the tire.

Wheels for the VAZ 2107 are available in several versions. They differ in certain parameters:

• Width.
• Diameter.
• Mass.
• Number of mounting holes.

It is allowed to install wheels of sizes R13, R14 on any VAZ 2107 car. According to the production method, this can be either stamping or casting.

Beginners always ask the question, which discs are best to put on the seven? It will not be possible to answer it in one sentence. Each type has its own advantages and disadvantages.

Rules for selecting light alloy wheels

The VAZ 2107 car has very specific technical parameters. The manufacturer recommends using certain types of components and consumables during operation. Stamped steel or cast alloy wheels must have the following technical characteristics:

1. number of bolts – 4 units;
2. distance between attachment points - 98.0 mm;
3. disc mounting diameter - 13 inches;
4. wheel width in the area where the tire is installed is 5.5 inches;
5. Disc offset – distance from the central plane to the mounting pad – 29 mm;
6. The minimum diameter of the hub assembly is 60.1 mm.

The manufacturer of the VAZ 2107 recommends adhering to exactly these characteristics when choosing and installing wheel rims

In some cases, sellers urge you not to pay too much attention to the machine’s operating manual and to purchase castings with other parameters. They are driven mainly by the desire to sell a set of components and make a profit from this process.