VAZ 2114 steering wheel diameter - steering wheel braid, steering wheel size

The comfort and safety of driving largely depends on the comfort of the steering wheel. Automakers in the design and manufacture of steering wheels for their cars are guided by simple rules: the steering wheel must be as unified as possible for the average driver and comply with all established standards. But each driver evaluates the comfort of the steering wheel according to his own criteria. Therefore, today steering wheel braids are in great demand, which help to personalize the steering wheel to the needs of each individual driver. We will tell you how to choose a steering wheel braid in this article and will try to briefly and without imposing a personal opinion talk about the main criteria by which you should approach the choice of a braid.

Dimensions of steering wheel braids

All steering wheel braids are divided by size by manufacturers. This is one of the main characteristics, along with the material from which it is made, as well as the method of attachment directly to the steering wheel.

Handlebar braid size 2110 (handlebar size)

Cars VAZ 2110, VAZ 2111 and VAZ 2112 - the steering wheel size is 38 cm, accordingly you need to purchase a braid of size M (37-38 cm)

steering wheel braid size 2110

Niva steering wheel braid size (steering wheel size)

The Niva's steering wheel is slightly different in size from other cars produced by VAZ. The diameter of the handlebar is 40 cm, which corresponds to size L.

Niva steering wheel braid size

Gazelle steering wheel braid size (handlebar size)

The most popular domestic business vehicle has an even larger steering wheel than passenger cars. And accordingly, a braid size XL is suitable for them

GAZelle steering wheel braid

Logan steering wheel braid size (steering wheel size)

One of the most popular foreign cars has a steering wheel size of 38 cm, and accordingly the appropriate size for it is M.

Logan steering wheel braid size

Braid on grant size (handlebar size)

Like most passenger cars, the VAZ 2190 Granta and modifications are equipped with a steering wheel whose diameter is 38 cm. Accordingly, the size of the suitable braid is M.

Grant braid size

Steering wheel braid sizes Priora (steering wheel size)

Priora, like almost all passenger cars, is equipped with steering wheels with a diameter of 38 cm. By purchasing size M, the car enthusiast makes the right choice.

steering wheel braid priors dimensions

Solaris steering wheel braid size (steering wheel size)

Most foreign passenger cars have a steering wheel with a diameter of 38 centimeters, which corresponds to size M.

Braid on Solaris size

Why do you need a steering wheel braid?

Steering wheel braid is one of the most popular and very common accessories for a car. There are many reasons for using this accessory:

  1. Preserving the appearance of the car interior, because the steering wheel is one of the most noticeable elements in the car interior.
  2. The desire to bring aesthetics and update the appearance of the “blurry-eyed” salon. This is especially true in cars where manufacturers have skimped on refinements in interior design.
  3. The desire to make driving more comfortable. In the warm season, even palms covered with sweat will not slip on it, which allows you to strengthen your grip and feel more confident on the road. In addition, the increased diameter due to the braid or cover also has an unobvious practical significance: a steering wheel with a small diameter that is too thin, especially when cornering, can slip in your hands. The thick steering wheel, on the contrary, has a hard and dense surface that is more pleasant to hold in your hands.
  4. Practical use. The steering wheel braid plays the role of a kind of cover. Which protects the steering wheel from the effects of sunlight, excessively dry air and temperature changes. In used cars, it also hides defects in the steering wheel that have appeared over time.

Which steering wheel braid should I choose?

Material of execution - The modern market is saturated with a huge number of different braids for the steering wheel, differing in materials of execution. Most often the material used is natural or ECO (leather substitute) leather, velor, rubber and foam rubber. Each user will be able to choose a model to their taste. For a young girl, a brightly colored foam or fur braid is suitable. Men will opt for timeless classics made of leather with a minimum of decorations and details.

Regarding quality, the undoubted leader among materials is leather (with proper care it can last the entire life of the car). then there are the braids of their ECO leather - exposure to sunlight and temperature changes are very destructive for them (service life is three to four years). The most fragile and short-lived are fabric braids with foam inserts; in addition to temperature conditions, the fabric is very sensitive to physical impact, like foam rubber in pads.

What are there

What is the diameter of the exhaust pipe of a VAZ 2107?
Typically, steering wheel covers are made of leather, leather substitute, foam rubber (sponge).

A win-win option is leather. Despite the fact that this is the most expensive material, it has many advantages.

The advantages also include elasticity, strength, and ease of maintenance of the material.

Such braids look expensive and stylish.

If you still don’t like the price, you can choose covers made from leather substitute or sponge.

Leatherette braids are similar to leather braids, so if you are on a budget, you can choose this option.

Sponge steering wheel covers make driving especially comfortable, as the foam rubber prevents your hands from slipping.

There are interesting models that take the shape of the driver’s hands and seem to “remember” it.

There are also models with special pads that massage your palms while driving, which prevents your hands from getting tired.

The advantages are also the low price compared to leather and a variety of colors, which allows you to take into account the tastes of any consumer.

Gel braids are distinguished by their characteristic angularity.

The voluminous protrusions inside are filled with a special gel composition.

Types of braids on the steering wheel.

Covers do not require additional actions to fix on the steering wheel other than putting them on directly. Complete donning will not take more than 20 minutes, provided that the buyer-car owner has not made any mistake with the size.

The advantages of this type:

A wide selection of models of all shapes, models, colors and shades. Quick and easy installation. Even a complete beginner can figure it out.

Disadvantages of this type:

Aesthetically, although the steering wheel becomes more attractive, there is still some “unfinishedness”. Constant physical impact on the cover causes the braid to begin to stretch. Thus, over time, the braid will begin to not sit tightly on the steering wheel, which in turn will lead to slipping. And this causes very great inconvenience when driving.

put the cover on the steering wheel

Sheathing covers are a kind of “new skin”, in their subgroup they are divided into two types according to the type of direct fastening. Using a lace or a special thread. A more advanced variation of the braid is a kind of steering wheel wrap.

The advantages of this type:

Aesthetic - allows you to get an excellent result, a well-tightened steering wheel will be pleasing to the eye and fit perfectly into the interior. It fits tightly to the steering wheel, there is no risk of slipping. Durable.

The downside is that installation is difficult, you need to spend a lot of time and have some sewing skills. To obtain an ideal result, it may be necessary to remove the steering wheel.

Selecting the right size braid

There are two parameters by which the size of the braids is determined. The first is the diameter of the steering wheel, the second is the width of the rim circumference. If you don’t know the parameters of the steering wheel in your car, then there is one correct solution. Take a tape measure, sit in the car and measure the steering wheel. All is ready. Now you have all the necessary data on hand. If the car is not near you or you are buying a braid as a gift for someone, everything is a little more complicated.

The most common size of steering wheels on modern cars is M, that is, medium. In numbers it is 37-39 cm in diameter. More on girth width later. Almost all European and Japanese sedans, minivans and crossovers have an M-size steering wheel. Compact city runabouts are most often equipped with S-size steering wheels, and American cars are equipped with L-size steering wheels. Therefore, if you do not know exactly the dimensions of the steering wheel for which you are going to purchase a braid, then it is better In total, take size M. A braid of this size will fit well on both larger and smaller steering wheels.

Rating of the best eco-leather braids

The material, in its appearance and characteristics, is very reminiscent of genuine leather, although it is not. The cost is less than silicone analogues. A distinctive feature is an attractive design. Can be solid or interesting. It is extremely popular among both women and men.

Dermay

In this model, it is necessary to highlight the quality of the stitching, since this is the main drawback of a product made from eco-leather. The stronger the seam and threads, the longer the product will last and will not lose its original appearance. This accessory is stitched with nylon thread, which practically does not tear or fray. It is used both for sewing the outline and existing inserts.

You will have to pay 1005 rubles for the product.

Dermay braid Advantages:

  • color contrast;
  • thread strength;
  • durability;
  • ease of use;
  • versatility.

Flaws:

none.

Dermay

The product is stylish, reliable and durable. Reasonable price for such characteristics. The stitching is high quality. The product consists of several parts. There are decorative elements that are beautifully framed with red thread, which makes the accessory even more attractive. The convex details of the braid gently massage the palms.

The average cost is 990 rubles.

Mc Driver braid Advantages:

  • attractive appearance;
  • pleasant tactility;
  • seam strength;
  • long service life;
  • value for money.

Flaws:

not installed.

Mc Driver

The average cost is 1896 rubles.

Mc Driver braid Advantages:

  • wear resistance;
  • beautiful design solution;
  • practicality;
  • versatility;
  • ease of use.

Flaws:

not installed.

Cobra

The product manufacturer is CarFashion. Production facilities are located in the Middle Kingdom. High-quality eco-leather is used in production. Color – black – brown. Available in two sizes: 37 and 39. Belongs to the universal category. Inserts reminiscent of reptile skin look stylish and rich. You can purchase it for your own needs or as a gift. The edges are well stitched. They will remain strong for a long time and will not fall apart or stretch.

Purchase price – 450 rubles.

Cobra braid Advantages: Disadvantages:

not identified.

Derbi-XL

The product attracts attention with its beautiful gray color. Made from high quality eco leather

Despite the Chinese origin of the product, there are no complaints about the quality. Suitable for any salon interior. Belongs to the category of universal. The edges are stitched with strong thread. Designed for large diameter steering rims (41 – 43 cm).

The sellers are asking 450 rubles for the products.

braid Derbi-XL Advantages:

  • quality of materials used;
  • seam strength;
  • thread reliability;
  • long service life;
  • ease of care;
  • value for money.

Flaws:

none.

Rubin

Product from a Chinese manufacturer. The surface is perforated. The product itself is black. Designed for steering rims with a diameter of 37 – 39 cm. The wavy structure has a pleasant effect on the palms. Even when driving for a long time, your hands do not get tired. The pad will last a long time if you take care of it promptly.

The average cost is 580 rubles.

Rubin braid Advantages:

  • unique design solution;
  • ease of use;
  • practicality;
  • ease of maintenance;
  • durability;
  • reliability;
  • landing strength.

Flaws:

not installed.

DKDFCD

If you decide to purchase an overlay up to 5,000 rubles, then you should pay attention to this model. Beautiful, stylish, high-quality product with suede inserts

The material is pleasant to the touch. The seams are made with high quality using durable thread that is almost impossible to tear. To put it on the steering wheel, you need to spend energy and free time. In addition, firmware is required. For these purposes, the manufacturer provides preformation along the entire length of the circumference, which significantly simplifies the process. There is no need to poke holes with a needle. The trim completely covers the steering rim, leaving no free space.

braid DKDFCD Advantages:

  • attractive appearance;
  • high quality sewing;
  • durability;
  • reliability;
  • ease of use;
  • ease of care.

Flaws:

not identified.

Learning how to correctly put the braid on the steering wheel

First of all, remove any sharp objects away from you, be it a screwdriver, pry bar, awl or anything else! No matter how much you would like to speed up the process of putting on the braid using these tools, remember that by using them, you risk damaging not only the braid, but also the steering wheel itself. To put it on, you only need the braid itself. Also, there is no need to pre-stretch the braid or heat it over an open fire. This will not lead to anything good.

You only need to pay attention to the temperature of the steering wheel braid itself. If the process occurs in warm weather, then there are no problems. If it’s frosty outside, then before putting the braid on the steering wheel, put it in the cabin closer to the stove and bring it to normal temperature. After this, align the steering wheel and attach the braid to it. If there are notches or patterns on it, position them according to the position of the steering wheel. You need to start tightening the braid from the top, smoothly moving down. To make the process easier, help yourself with rotational movements around the rim of the steering wheel - this way the braid will sit on the steering wheel much faster. All. As you can see, nothing complicated.

We hope you will follow our recommendations. Then the selected steering wheel braid will serve you faithfully for more than one season.

Braid on the steering wheel - how to choose

This type of accessory for a car is purchased by its owner for greater comfort, in order to hide existing defects on the steering wheel, or in order to give individuality to the car’s interior.

First, you need to determine the degree of comfort from touching your hands with the braiding material. Hands should not slip and sweat excessively, as this will lead to difficulties when driving. In the winter season, a good braid will save you from touching a cold steering wheel.

It is important to determine the size of the required braid, the diameter and width of the rim. If the dimensions of the steering wheel are not known, you need to measure the steering wheel. You will be able to see many options. The VAZ 2115 photo will show you the interior and help you choose the best option.

When choosing a braid, significant attention should be paid to the material used to make the accessory. Plastic and other hard materials are not recommended. The most successful braids are made of genuine leather; they are pleasant to the touch and have a decent appearance. If you are looking for a more budget-friendly model, it is worth considering fabric options.

The appearance and shape of the braid should be in harmony with the interior of your car. There are many beautiful options for the VAZ 21099. It’s a good idea to be guided by the design of the seat covers. Thus, the so-called interior of your car will acquire an extremely unique look.

Typically, stores selling car accessories offer models costing from 300 rubles. The service life of the braid depends on the material and workmanship.

To install the braid on the steering wheel, you do not need additional tools, especially if you exclude all sharp objects. Stretching the braid is also not required. It is important to remember that any manipulations with the braid can render it unusable. The braid should be warm, this point is especially important in cold weather. Bring the steering wheel to a level position, lean the braid against it to determine the correct position of the pattern, if any. The process of tensioning the braid occurs from top to bottom. By following all the steps correctly and avoiding sharp tools to speed up the process of tensioning the braid, the accessory will please the eye throughout its service life and provide comfortable driving.

Caring for the steering wheel braid is not difficult. It is sometimes enough to treat braids made of genuine leather with leather cleaning solutions; leatherette is wiped with ordinary liquid detergents. Braids made of fabric and suede must be cleaned with a dry brush; washing in this case is unacceptable, since the braid will lose its shape.

Materials

Purpose and installation of electric power steering on a VAZ 2107

The foam covers are soft and comfortable to hold. At the same time, they are short-lived, which is why they require frequent replacement.

Webbed braid models massage the palms well. During a long journey, this relaxing property will come in handy. But they do not allow moisture to pass through, so your hands may sweat. And with active driving, calluses often appear on the palms.

Comfortable braids with a gel base are pleasant to hold, but stiffen and become stale in cold weather.

The best braid option for the steering wheel is leather. They are more expensive, but the high price in this case is justified.

Steering wheel braid

Car steering wheel braids

Braids

They have long become a common car decor accessory.

They allow you to better feel the steering wheel, prevent your hands from slipping, and are combined with the interior trim,

allow you to add variety to the interior of your car.

are available in various materials

.

Genuine Leather. imitation leather, fur, PVC, fabric and fabric coated with leather, Alcantara.

Various fillers - foam rubber, gel.

When choosing a braid, be sure to pay attention to the diameter of the steering wheel of your car.

Manufacturers label braids differently.

The most common options:

Size S

— 35-37 cm: Tavria, Oka, sports steering wheel.

Size
M
- 37-38 cm: VAZ 2108-2109, 21010-2115, foreign passenger cars.

Size
L
- 39-40 cm: VAZ 2101-2107, 21011, 21013, Niva, Volga, Moskvich.

Size
XL
- 42-43 cm: Gazelle, UAZ.

How to choose a braid and how to put on the braid correctly - watch a video clip from the manufacturer

Entrance to the store

Pay for your order by card

You can order an invoice for non-cash payment

or pay through the Yandex.Checkout form using a bank card.

Do I need to modify anything during installation?

In any case, no matter which option you choose, you will also have to configure the transmission speed sensor. If this is not done, then when starting from a stop and at low speeds you will not notice any changes. That is, it will still be difficult to turn the steering wheel. And only when you pick up high speed, the steering wheel will give in to you with less resistance.

And if there is no speed sensor, then it must be installed. Here's what it should be: 6-pulse pass-through from 214 Niva (usually included with the factory electric amplifier)

In addition, some other changes will need to be made to the design. Here they are:

  • take another choke cable (included with the electric booster from the VAZ 2108) and move it;
  • replace the gearbox - take one so that it has a short worm shaft, but the bipod remains original;
  • if the VAZ 2107 has a contact ignition system, then you need to install a MUR1100E diode.

Payment for goods in the AUTOBOX online store

Delivery

The order is sent in any way convenient for you:

by Russian Post or EMS; transport company;

By courier in Novosibirsk; Pickup from the order receiving point;

Calculate the cost of delivery through the transport company PEK

Guarantee

If the product does not match the description, you can return the product,

paying the cost of return shipping.

Full refund if you do not receive the item

Refund if the description does not match

Product search

Our online store “AVTOBOX.INFO”

AVTOBOX LLC has been engaged in automotive accessories since 2009.

everything you need for your iron friend with us, in our auto shop.

We guarantee the high quality of all products presented and fulfillment of warranty obligations.

We are ready to advise you on any accessory, tell you about its properties and correct use.

Call, write, we will definitely answer, advise, advise.

The advantages of cooperation with our company are that:

  • We have extensive experience in this field of activity.
  • We can offer you a huge selection of car products and car accessories.
  • Our products are distinguished by their quality; we work directly with major suppliers and manufacturers.
  • There are no problems for us with exchanging goods.
  • We ship orders anywhere in our country. Delivery method of your choice.
  • We can offer the services of Russian Post, EMS services, TK Energia, TK Autorading, TK PEK, TK ZhelDorExpedition.
  • Payment can be made in cash or by bank transfer.
  • Our website describes in detail the methods of transferring from a SberBank and Alfa Bank card.
  • We have reasonable prices.
  • You can also ask our managers about the conditions for providing discounts or partial payments. Write to us any time. Call us by phone from 5-00 to 18-00 (Moscow time); Order pick-up point at Novosibirsk, st. Stationnaya 30a ka, office 202 Place orders in the AUTOBOX online store Honesty, quality, commitment are the main criteria of our work with clients.

New steering wheel for VAZ 2114

AutoNews / Reviews / Tests

Which Steering Wheel Suits a VAZ 2114

How to remove and change the steering wheel on a VAZ 2114 and 2115 with your own hands

The VAZ 2114 and VAZ 2115 cars are part of the Lada Samara family. Their steering wheels are not distinguished by graceful lines and ease of use, especially on earlier models. There can be no talk of any aesthetic pleasure here. It’s not surprising that many owners of these cars feel the desire to replace the steering wheel with a part with the best design. But how to choose a suitable steering wheel, and can you remove and install it yourself? Let's figure it out together.

How to remove the steering wheel?

Dismantling the control wheel on the VAZ 2114 and 2115 is done in a similar way. However, remember that according to the Code of Administrative Offenses, replacing a steering wheel with a steering wheel different from the original is considered illegal modification of the steering structure and vehicle control system. Such tuning falls under Part 2 of Article 12.5 of the Code of Administrative Offenses on driving a vehicle in the presence of defects or the criteria under which its operation is prohibited. In the near future, traffic police officers are quite zealously catching violators of this article, so think carefully before you begin the substitution process.

Installation Rules

Installing the steering wheel is a dismantling process in reverse order. If you can handle the removal, then you will be able to install it.

  1. Installation begins by transferring the mark from the old steering wheel to the new one. Be extremely precise: the correctness of further control of the machine depends on this. The mark on the new part should be exactly in the same place as on the previous one.
  2. Put the steering wheel back in place. Make sure that the mark on it and on the front panel match the same as in the case of the old part.
  3. Replace the central nut and tighten it. If it does not fit tightly in the socket head, insert the wire strands between them. When the nut is in place, remove the wires and secure the nut tightly.
  4. Replace the steering wheel cover and tighten all screws.
  5. Make sure the steering wheel is straight. If even a slight displacement is observed, the part will have to be reinstalled.
  6. Replace the battery terminals and test your new steering wheel by driving it away from major roads. At first, its diameter may be unusual, but the ease of driving should remain the same.

if the nut falls out of the socket, use the wire strands

The most difficult thing in the process of replacing the steering wheel on a VAZ 2114 and 2115 is choosing the right parts

Pay attention to the markings on the steering wheel, covers and, if necessary, adapters. In some cases, it may be necessary to replace the steering column switches

But dismantling and installing a new steering wheel itself will not cause you any particular difficulties if you strictly follow all the instructions.

Replacing the steering wheel

You can do your own tuning of the interior of a VAZ 2114 by upgrading the existing steering wheel using a factory braid. This will not only improve the appearance of the steering wheel, but will also ensure good hand contact with its surface. Leather can be used as a material. You can purchase and install a new steering wheel, both those made by popular global manufacturers, and those created by representatives of handicraft workshops.

The safest is the steering wheel installed by the manufacturer. This is what is developed for a specific model; this steering wheel passes all tests and meets the standards. However, if you want to tune the interior of the VAZ 2114, you can install a larger or smaller steering wheel.

It should be noted that installing a non-original steering wheel may require force to rotate, which will affect controllability, this will be especially noticeable in critical situations. Such changes may create certain difficulties during technical inspection.

If the steering wheel is being replaced, you must first disconnect the negative cable terminal from the battery terminal. After the key is removed from the ignition, the steering wheel should be turned until the locking device is engaged.

If it does not give in, then there is no way to do it without the help of a second master. One will have to pull the steering wheel towards himself, and the second will have to strike the end of the shaft with a hammer. In this case, you need to use a drift made of soft metal.

Once the nut is removed, the steering wheel can be removed. Now you need to align the two wheels with each other in order to transfer the mark made earlier. Installation of a new wheel must be done in the reverse order. To ensure that the fastening nut does not fall out of the head when mounted on the shaft, it is necessary to install a wire of the required diameter, placing it between the nut and the head.

The nut must be tightened, the head removed and the wire removed, after which the fasteners can be tightened. A situation may arise in which the steering wheel spokes, when the car moves straight along a horizontal platform, will not be positioned symmetrically. In this case, you need to stop the car, remove the steering wheel and install it correctly, and then check the accuracy of the work while driving.

We remove the old steering wheel.

What is the diameter of the center hole of a car wheel?

First, fix the steering wheel straight and align the front wheels, then remove the minus terminal from the battery.

We disconnect the car signal connector, and after that we unscrew all the screws of the steering column casings and remove the lower cover of the steering column trim.

After removing the lower steering column casing, you need to unlock and lower the steering column adjustment lever and then remove the upper steering column casing.

Using a screwdriver, remove the decorative trim on the signal, unscrew all the fastenings of the signal button and pull it out.

Using a socket wrench, unscrew the steering wheel mounting nut, but not completely.

If you do not have a puller, then you can use your hands to apply several blows towards you on the steering wheel, unscrew the nut and remove the car steering wheel.

Next, we change the steering wheel, removing the decor and the horn button, after securing the steering wheel, unscrew the nut and take out the steering wheel, remove the steering wheel cover too, and attach it to the new steering wheel.

Modernization of interior elements


If you do the VAZ 2114 tuning yourself, you can upgrade the interior lighting.
You can choose a more modern device as a light source. Instead of the traditional one, you can install a lampshade that has a programmable LED lamp. This interior lighting has expanded functionality. For example, you can select one of three brightness modes, which will be possible by switching at intervals of 1 second, while the system will remember the last time it was turned on. You can set it to delay turning off after 6-8 seconds, followed by a smooth shutdown of the lamp. If the door is not closed or poorly closed, the lighting will turn off after half an hour.

First, the plastic diffuser of the “native” lampshade is dismantled. The wires are disconnected from the contacts, the fasteners that are responsible for fixing the device body are removed, this will allow the body to be dismantled. The LED component must be removed from the plastic cover. The electrical wiring must be connected to the plugs of the illuminator according to the diagram. The new body of the device must be fixed to the ceiling in the appropriate place, using the same screws. Now the diffuser can be mounted on the body.

Tuning a VAZ 2114 car often involves changing the seats or reupholstering them. The upholstery can be made of almost any material, but the leather interior of a VAZ will look much better than one made of material installed at the factory. To reupholster the chairs, you must first dismantle them. After this, you can remove the old covers and loosen the steel clamps on the back.

The covers must be cut into separate elements, which will allow the dimensions to be transferred to a new material, which can be used, for example, Alcantara or, as already noted, leather. If you decide to use Alcantara, then you need to take into account that it has a short pile, which is directed in one direction, which you will have to pay attention to at the time of cutting.

The waist can be reinforced with foam rubber sheets, for which you should use sheets that have a thickness of 5 mm. The elements of the covers should be glued onto foam rubber, the components sewn together and put on the seats. After tuning the VAZ 2114, photos of the interior can be posted on specialized websites and experience can be shared.

Dismantling process

There is electronics inside the steering wheel - the signal of a VAZ 2114 car, so first of all you need to disconnect the negative terminal of the battery. By turning the front wheelset to the “straight” position, you can begin dismantling:

  1. The first step is to unscrew the seven screws on the covers located under the steering wheel. Once the fasteners are removed, the lower casing can be detached. The top section should only be removed when the steering column is pointing down;

After this, you need to remove the decorative trim. It has no fastenings, so it can be removed with a flat-head screwdriver. This must be done carefully, as the plastic here is fragile. Under the cover there will be two screws that hold the signal button - this also needs to be removed; Next, you should unscrew the steering wheel fastening nut so that it stays on the shaft, that is, you do not need to completely remove it;

Unscrew the 2 bolts located behind the removed cover and remove the cover and remove the plastic component

When the last fastening is removed, the steering wheel can be knocked down with a sharp blow and removed. In this case, a rubber hammer will help, as it will not damage the surface of the steering wheel.

Important! The steering wheel in the VAZ 2114 sits tightly on the spokes, so with a sharp jerk the parts may be damaged. When the hub is removed from the spokes, you can finish the fastening nut

Installing the steering wheel is done in the reverse order. An important point is the pointer switch ring. When installing, it must be rotated so that the pin can fit into the groove of the ring. If a non-standard product was purchased as a replacement, then the process is the same; the only differences can be in fastening and fixing.

Tuning the interior trim

Vinyl leatherette is most often used as an alternative upholstery material. It is better to choose the main color in advance. We advise you to buy coverage with a reserve.

Before starting work, you also need to prepare a set of necessary tools and materials:

  • vinyl artificial leather (you can choose any other suitable one);
  • knife or cutter;
  • strong threads;
  • a simple sewing kit (ideally, work on a sewing machine);
  • scissors;
  • pencil;
  • construction stapler;
  • good glue.

The easiest item to replace is the sun visor, so that's a good place to start. The part is removed from the fastenings and the standard upholstery is removed by separating it along the seam. A piece of new material will be cut along the top and bottom. When cutting, you need to step back from the outlined boundaries by one centimeter; this margin will be used for seam allowances. You also need to leave some more space - approximately 0.3-0.4 cm from the same contour line - in order to pull the cover over the visor.

Using a sewing machine, the two parts are sewn together. This can be done without a machine, but in this case the operating time will increase significantly. The seam should be on the wrong side. Leave part of the contour line unsewn, since the product must be turned out through this hole and pulled onto the visor, after which the free space is sewn on the outside. The visors are installed in place, now you can move on to other elements of the interior.

Replacing door trim

Door cards can also be transformed by replacing them with an alternative material. This is no more difficult to do than the previous procedure with visors. The scheme is similar. The door cards are removed, and the standard upholstery is removed using a utility knife. This contour is applied and outlined on the wrong side of the vinyl leather, after which the pattern is cut out with the same margin of one centimeter along the edge.

A staple gun should be used to attach to door cards. However, standard staples will not work, since the card is too thin and they will pierce right through it. For work, it is better to choose staples with number 8. Vinyl leatherette is attached to the back of the doors with a stapler. If the staples do come out, they can be removed by cutting them off with ordinary office scissors. Next, all that remains is to install the door card in place. On the other doors everything is done in the same way.

Replacing the roof sheathing

The procedure is largely similar in processing all other elements. The only inconvenience is the labor-intensive nature of such work, which takes a lot of time and effort. But you can always do not everything at once, but gradually.

The process goes like this. The roof is measured and, based on the results obtained, a contour is drawn on a piece of vinyl leatherette. After this, the material is glued to the roof (a stapler will not work, the upholstery is practically in contact with the metal). It is possible to first remove the old upholstery, or you can stick the new one directly on it. It is recommended to use the second option: dismantling the ceiling cladding will significantly complicate the replacement process, and it will not bring practical benefit.

For a more attractive appearance of the interior, you can replace the lighting with LED. It is worth changing the lampshade itself along with this. You can tune the interior trim yourself using inexpensive materials and the simplest tools. Creating a leather interior is done in a similar way, only you need to use leather glue.

Complete interior tuning

It's easy to replace the trim inside the car, but what about the seats? After all, they will remain with regular fabric upholstery, and this combination will not look very attractive. It is unrealistic to reupholster the chairs yourself, so you can use the economy option and buy covers made of the same or similar material. More advanced owners of the VAZ 2114 solve the issue radically and change the seats completely, often choosing sports seats of the “bucket” type.

To replace the casing, you can contact a service center and actually perform this procedure yourself. To do this, you only need a set of wrenches. There will be no difficulties with dismantling. The audio system cannot be called a tuning element, but installing a modern car radio with a touch screen will significantly decorate the center console of the VAZ 2114. You can complement the interior tuning with alternative dashboard lighting, a leather steering wheel cover (preferably in the same color as the overall upholstery).

Sources:

https://xn—-7sbgz2air6b.xn--p1ai/%D0%BE%D0%BF%D0%BB%D0%B5%D1%82%D0%BA%D0%B0-%D0%BD%D0% B0-%D1%80%D1%83%D0%BB%D1%8C-%D1%80%D0%B0%D0%B7%D0%BC%D0%B5%D1%80%D1%8B-%D0 %B2%D0%B8%D0%B4%D1%8B-%D0%B8-%D0%BE%D1%81%D0%BE%D0%B1%D0%B5%D0%BD%D0%BD/ https ://htdrive.ru/blog/vybiraem_opletku_na_rul_nuzhnogo_razmera https://ladarus.ru/oplyotka-na-rul-kak-vybrat/ https://www.avtobox.info/index.php/price.html?page=shop. browse&category_id=115&Treeid=167 https://l2rv.ru/info/novyj-rul-na-vaz-2114/ https://expertvaz.ru/2114/tyuning-salona-zamena-rulevogo-kolesa.html

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]