The VAZ remains the most beloved and unpretentious car, which has not lost its position since the 70s of the 20th century.
It is very difficult to imagine modern roads without these eternal “workers”, regularly traveling around the cities and villages of our large and beloved homeland. Cars drive properly even in their absence, which, of course, adds respect to it.
VAZ for scrap metal
- Scrap removal Scrap metal pickup
- Non-ferrous metal scrap
- Paper
Weight of VAZ 2105 bodies
For most modifications of the VAZ 2105 sedan, the body weight is 995 kg.
Mass values:
Weight of sedan modification bodies:
- VAZ 2105 2105 1.3 MT (1980 – 1992): 995 kg.
- VAZ 2105 21054-30 1.6 MT (2005 – 2010): 995 kg.
- VAZ 2105 21051 1.2 MT (1981 – 1999): 995 kg.
- VAZ 2105 21059 1.3 MT (1980 – 2010): 995 kg.
Model body features:
The base and roof of the VAZ 2105 body are made in the form of solid stamped trough-shaped panels. The side of the body consists of an inner panel (strut reinforcements) and an outer panel (three pillars, threshold, rear fender).
Important: the VAZ 2105 sedan is equipped with a three-volume body with four side doors; structurally, the body has three compartments: a compartment for the power unit, a passenger compartment, and a luggage compartment.
Other names:
The 4-door sedan VAZ 2105 was also known as the Lada 1300 and Lada Saloon.
Subtleties of the model range:
For this model, many modifications were produced for special services: LADA-21055 (for taxis with a VAZ (BTM)-341 diesel engine), LADA-21059 (for traffic police, the Ministry of Internal Affairs and the KGB).
Years of production Years of production: 1979-2010.
Conventional flywheel
No matter what anyone says, this is a fairly calibrated part that is calculated for loads, torsion, and even breakdown.
Usually its weight ranges from 7 to 9 kilograms. It all depends on the model and class of the car (I don’t take trucks, they weigh much more).
After the engine is started, a conventional flywheel gains kinetic energy from the operation of the motor. Therefore, when the engine is running, some part is spent on its promotion and further rotation. Moreover, the heavier this “disk” is, the more energy needs to be spent. This especially affects high speeds, where energy consumption increases in a quadratic progression, starting from 4500 revolutions.
That is, it turns out that the flywheel, as it were, interferes with the operation of the engine, taking away some of its energy for its spin-up. However, not everything is so simple here - due to its weight, this element absorbs various unnecessary energies caused by engine detonation or some other side processes. Thus, they do not go into the body, but are sort of “absorbed”, which is not unimportant!
Material of manufacture
With this configuration of the body and suspension, the frame material plays a significant role in the safety and stability of the car. It is logical that strengthening the weak points of the body will make the vehicle stiffer and more stable on the road. But then the mass of the car will be critical, which will make it clumsy and very heavy.
When strengthening the frame, the weight of the “penny” and the load on all structural elements increases. That is why design engineers are trying to select the rational thickness of materials, taking into account the ratio of their dimensions and cross-section. The result is a fairly durable and not too heavy body.
To reduce weight and save on costs, elements that do not bear the load are made of thinner metal. The main parts have a thickness of about one millimeter, which corresponds to similar indicators for other cars of similar class.
To better understand the topic, it is important to consider a couple more examples.
How much does a VAZ 2107 weigh for scrap metal? Its mass ranges from 1030 to 1060 kg. If you subtract 30%, it turns out that the owner of the vehicle will only be paid 721-751 kg of scrap metal.
How much does a VAZ 2106 weigh for scrap metal? The mass of its body is about 300 kg. Motor – 140 kg. Mosta – 52 kg.
You should not dispose of a vehicle yourself without certain skills. It is better to take it to a specialized point where disposal will be quick and safe.
External description of the VAZ-2112
This brand of car differs from its previous brothers in both external and internal parameters. The body of the car has been improved, it has become slightly longer, due to this the volume of the luggage compartment has increased to 400 liters. And if you fold down the rear seats, you can carry more cargo.
It is especially worth noting the convenience of splitting the rear seat, which allows you to transport small loads while maintaining the comfort of the car. Add to this a more sporty handling. The brand has retained the advantages of its predecessors with minor innovations depending on the configuration.
Thus, the most budget option was considered to be the 21122 package, where the engine from 2111 was installed, with non-ventilated brakes from 2108 and without electric windows.
The elite version was 21128 with an engine capacity of 1.8 and a power of 100 horses. The production of the popular brand VAZ-2112 lasted from 1999 to 2008 in small batches, this made it possible to maintain stable demand for this car.
Interesting Facts
Classic VAZ cars have retained their original configuration and the love of the people until modern times, regardless of age and social status. The engineers of the Volzhsky Automobile Plant do not even think of stopping at the achieved result, developing and manufacturing new modifications.
It is noteworthy that of all Soviet passenger cars, only the “kopek” was delivered to the Land of the Rising Sun. The popularity of the models in question is largely due to Kimi Raikkonen, who achieved his first successes and victories on this particular car. The father of the legendary racing driver considered this car one of the most reliable representatives of its segment.
If you find out how much the VAZ-2101 and its followers weigh, you can note that over its half-century history this figure for the brand in question varied from 0.95 to 1.3 tons. There were no significant and cardinal changes in this direction.
Features of car recycling
Before you scrap your car, you should familiarize yourself with the principles of this procedure. The average weight of a vehicle is 1000 kg. If the entire car can be recycled, the collection point will deduct 30% for clogging. The latter includes all non-metallic elements, pollution, etc.
Let's consider how much a car for scrap metal weighs using the example of a VAZ 2105. The weight of the latter is 955 kg. Thus, taking away the blockage, we get about 660 kg. You should also take into account the price of scrap, which differs depending on the city. As a rule, in megacities, the number of rubles received for a car will significantly exceed the amount earned in a similar organization in a small locality.
Before calculating the profit from a scrapped car, you need to take into account transportation costs. If the car is a pile of metal, you need to take care of a tow truck. If there are spinning wheels and functional steering, the car can be transported in tow. Then, this expense item will not be so significant. Therefore, in order to calculate how much a Zhiguli costs when scrapped, it is not enough to know how much a VAZ 2109 or 21099 weighs for scrap metal (915 kg). It is necessary to take into account the features of recycling and the requirements of collection points. It would be useful to know the average cost of scrap metal in the region. Additional awareness will allow you to avoid fraud on the part of unscrupulous receivers.
Weight of VAZ 2105
The carrying capacity of the VAZ 2105 21059 1.3 MT sedan is 400 (kg).
Weight of modifications:
- VAZ 2105 2105 1.3 MT (1980 - 1992): 995 (kg) 1395 (kg).
- VAZ 2105 21054-30 1.6 MT (2005 - 2010): 995 (kg) 1395 (kg).
- VAZ 2105 21059 1.3 MT (1980 - 2010): 995 (kg) 1395 (kg).
The value of the permissible gross vehicle weight is indicated in parentheses.
Load capacity of the sedan:
The mathematical difference between a vehicle's gross vehicle weight rating and its curb weight is the vehicle's payload capacity. For example, for the VAZ 2105 21059 1.3 MT sedan, the load capacity is determined as follows:
Important: a rear-wheel drive small class III group car with a sedan body was produced by the Russian company AvtoVAZ from 1979 to 2010, the model was also assembled in Ukraine and Egypt, possible layout: front-engine or rear-wheel drive, seats - 5.
Other names:
The 4-door sedan VAZ 2105 was also known as the Lada 1300 and Lada Saloon.
Subtleties of the model range:
For this model, many modifications were produced for special services: LADA-21055 (for taxis with a VAZ (BTM)-341 diesel engine), LADA-21059 (for traffic police, the Ministry of Internal Affairs and the KGB).
Years of production Years of production: 1979-2010.
How much does the VAZ-2101 weigh: characteristics
The first Zhiguli of this model has a bare weight of 955 kilograms, of which 114 was the weight of the engine. This is exactly the answer to the question: how much does the VAZ-2101 weigh?
A car's gearbox is:
- four-speed;
- five-speed.
Weighs 26.2 kg together with clutch, shift lever and clutch release fork. This data must be taken into account when replacing a particular part.
The flywheel, which has a native weight of 6.873 kg in the hands of its owners, often reduces the weight with the help of tuning to 3.6 kg. This promotes maneuverability and increases the speed of the car on the road.
The “classic” is sold in used condition, since its production has been completed, but, of course, according to documents containing the owner’s data and technical parameters of the car. Assembled parts of the VAZ-2101 car are sold everywhere.
VAZ has retained its shape and the love of the public from all segments of the population to this day. Volzhsky Automobile is not going to stop there, producing more and more modifications of the Zhiguli. If we consider how much each component of a VAZ car weighs, it will become clear that the total weight of each of them is approximately the same.
It is worth noting that of all Soviet cars, only the VAZ-2101 was supplied to Japan. The popularity of the VAZ is not least associated with the name of Kimi Raikkonen, who achieved his first victories with this car. The father of the famous racer considered this car the most reliable.
If we look at the weight of the VAZ, we can say that throughout its fifty-year history, the weight of cars of this brand has fluctuated from a ton to a ton of three hundred kilograms, but, in fact, has not undergone large and significant changes.
Model VAZ-2104 – Community “Autoclub VAZ and Lada Classic.” on DRIVE2
VAZ-2104 is a rear-wheel drive passenger car with a station wagon body. Developed at the Volzhsky Automobile Plant. Produced since 1984 Serial production of the VAZ-2104 car was started at the Volzhsky Automobile Plant in 1984. The new model was produced in parallel with the VAZ-2102 car of a similar class until 1985. When creating this model, the designers were guided by an important feature of that time - the creation of a new model with minimal production costs and maximum consumer effect. Therefore, the VAZ-2105 model was taken as a basis. After lengthening the roof, stampings appeared to increase rigidity. This body design made it possible to place a long trunk on the roof, which was not recommended to be overloaded, since the calculated rigidity of the station wagon body was significantly lower than that of a sedan. The new model featured a rear door that opened upwards; in addition, a completely new solution was used, a heated rear window and a windshield wiper, which later became standard equipment, since until 1994 only export versions and the modification of the VAZ-21043 were equipped. The interior for the new model was borrowed from the base model with the exception of the rear seat. The folding rear seat allows you to increase the volume of the luggage compartment from 375 to 1340 liters, and then you can transport large cargo. The total vehicle load has increased to 455 kg. In the basic configuration, the interior trim is quite simple. The Spartan version assumes a standard panel with a minimum required set of instruments, upholstery and seats with standard removable faux leather headrests and rubber floor mats. The desire for greater comfort is proposed to be satisfied with improved seat upholstery made of brushed jersey, solid-molded door linings, brushed floor mats, an instrument panel with an additional center console, which has an expanded set of functional keys and control equipment, and an original steering wheel. Later, a station wagon modification of the VAZ-21047 appeared on the market, equipped with a five-speed gearbox, electrical equipment and an interior with anatomical front seats from the VAZ-2107. From 1999 to 2006, a modification of the VAZ 21045 was produced with a 1.52-liter diesel engine produced by Barnaultransmash.
Modifications
• VAZ-2104 - VAZ-2105 engine, 1.3 liters, carburetor, with 4-speed gearbox, base model • VAZ-21041 - VAZ-2101 engine, 1.2 liters, carburetor with 4-speed . Checkpoint. Not mass-produced.• VAZ-21042 - VAZ-2103 engine, 1.5 liters, right-hand drive• VAZ-21043 - VAZ-2103 engine, 1.5 liters, carburetor with 4 or 5 speed. Gearbox, in versions with electrical equipment and interior from the VAZ-2107• VAZ-21044 - VAZ-2107 engine, 1.7 liters, single injection, 5-speed. Gearbox, export model• VAZ-21045 - VAZ-2107 engine, 1.8 liters, single injection, 5-speed. Gearbox, export model. Not mass-produced.• VAZ-21045D - VAZ-341 engine, 1.5 liters, diesel, 5-speed. Gearbox• VAZ-21047 - VAZ-2103 engine, 1.5 liters, carburetor, 5-speed. Gearbox, an improved version with the interior of a VAZ-2107. Export modifications were equipped with a radiator grille from the VAZ-2107. • VAZ-21048 - VAZ-343 engine, 1.8 liters, diesel, 5-speed. checkpoint
• VAZ-21041 - VAZ-21067 engine 1.7 liter injector, 5-speed gearbox, interior and electrical equipment of VAZ 2107
Technical characteristics of the car
Model 2104, 21041 21043 21043-03 21044 21045
Body type station wagon Seats 5 Doors 5
Trunk volume345/1035
Dimensions and weight of the car
Length 4115 Width without mirrors 1620 Height 1443 Own weight 1020 Payload 455 Wheelbase 2424 Front track 1365 Rear track 1321 Ground clearance to engine sump 182 Ground clearance to rear axle beam 170
Ground clearance to the lane beam. pendants175
Device Features
Engine 2105 2101 2103 VAZ-3411 Displacement, l1,294 1,198 1,452 1,452 1,452 Rated power at a crankshaft speed of 5600 min-1 according to GOST 14846 (net) 47.0 (63.9 )43.2 (58.7)52.3 (71.1)52.3 (71.1)38.7* (52.6)* At a crankshaft speed of 4800 min-1 Degree compression 8.5 8.5 8.5 8.5 23Tires Tube, radial 165/70 R13 or 165/80R13 (165SR13) Wheels Disc, stamped Rim size 127J-330(5J-13) Drive wheels Rear Front suspension Independent, wishbone, with coil springs, telescopic hydraulic shock absorbers and anti-roll bar Rear suspension
Five-rod. Dependent, rigid beam connected to the body by one transverse and four longitudinal rods, with coil springs and hydraulic shock absorbers
Transmission
Clutch Single-plate, dry, with a central pressure spring Gearbox Mechanical, three-way, four- or five-speed, with synchronizers in all forward gears Number of gearbox stages 5 or 4Gearbox ratiosI 3.636II 1.95III 1.357IV 0.941 V 0.784Reverse 3.53
Final drive ratio 4.1 4.1 4.1 or 3.9 4.1 or 3.9 4.1 or 3.9 4.1 or 3.9
Brakes
Front brakes Disc brakes with two opposing hydraulic cylinders and automatic restoration of the set gap Rear brakes Drum brakes with self-centering shoes, with automatic restoration of the gap between the shoes and the drum, with pressure regulator Service brake drive Foot, hydraulic, dual-circuit, with a vacuum booster Parking brake drive Cable
Clutch drive Hydraulic
Steering
Steering Injury-proof, with an intermediate cardan shaft Steering gearbox With globoidal worm and double-ridge roller on ball bearings, gear ratio 16.4 Steering drive Three-link, consists of one middle and two lateral symmetrical rods, bipod, pendulum and swing arms
Electrical equipment
Electrical wiring systemSingle-wire, the negative pole of the current sources is connected to ground. Rated voltage, 12 V Rechargeable battery **6ST55P, capacity 55 Ah at 20-hour discharge mode Generator 37.3701, alternating current with built-in rectifier and voltage regulator. Return current 55 A at 5000 min" Starter 35.3708, with electromagnetic traction relay and freewheel, power 1.3 kW Spark plugs
A17DV or FE 65 P with M14X1.25 thread
Dynamic and operational characteristics
Maximum speed with driver and 1 passengerMaximum speed with full load 135 143 143Acceleration time to 100 with driver and 1 passenger 18.5 17 17Acceleration time to 100 with full loadSmallest turning radius 5.6Maximum lift without acceleration, in % 34Braking distance laden from 80 km/h 43.2Fuel consumption at 90 km/h7.57.47.4Fuel consumption at 120 km/h10.110.3 10.3Fuel consumption in the urban driving cycle 1010.310.3Fuel tank capacity 42Macca of towed trailer with brakes 600Weight of towed trailer without brakes 300
Maximum roof rack weight 50
Main overall dimensions of the VAZ-2104 car
