Do-it-yourself tuning of the Lada Priora, photo of tuning the Lada Priora interior

The LADA Priora family is Russian-made cars of European class. Lada Priora is a very deep restyling of its predecessor - the tenth family. Smooth and pleasant design, modern lighting technology, excellent interior designed with the participation of Italian designers, airbags - all this and much more allowed the Priora to have a high level of equipment, comfort and safety. The Priora family is available in the following models: VAZ 2170 sedan, VAZ 2171 station wagon, VAZ 2172 hatchback, VAZ 21708 Priora Premier and VAZ 2172 coupe. Considering the excellent quality and popularity of the car, there are a huge number of options for improving the exterior of the Priora.

Priora tuning will allow you to make the appearance the way you want. Priora tuning from our online store will make your car stand out and attract attention. With our tuning solutions you will correct the shortcomings and mistakes of the designers, reflect your character and improve the aerodynamics of the Priora. We invite you to familiarize yourself with a wide range of tuning kits and individual elements - we have collected the best, in our opinion, body kits and tuning solutions.

Tuning a Priora sedan with your own hands, where to start

When thinking about restyling their car, many car enthusiasts try to radically change its appearance, supplement the body structure with body kits, sills, arches, spoilers and other “decorative” elements. But we should not forget that high-quality tuning should not only change the design of the Priora, but also change its dynamic and economic qualities for the better, making the car more comfortable and easy to use. Otherwise, all manipulations performed are only decorative.

tuned Priora bumper

The main tasks that tuning for a Priora sedan must perform:

improved sound insulation;
increasing the dynamic properties of the car;
maintaining and improving body streamlining;
increasing the passive safety of passengers;
improvement of engine power indicators;
reduction of fuel consumption;
addition of interior parts that increase the comfort of the driver and passengers;
increasing body protection from external factors.

All of these tasks must be completed in a comprehensive manner, primarily improving the comfort and safety of the driver and passengers. As for the external restyling of the Lada Priora, here everyone chooses the direction of action according to their own taste.

It is also important to take into account the fact that it is not always possible to do tuning of the Priora sedan with your own hands. In some situations, special tools and devices are required, which are located in specialized car dealerships

In this case, it is worth resorting to the help of experienced specialists who can also give good detailed advice in the process of restyling the Priora.

Decor of plastic components

The sedan is equipped with a lot of plastic parts in the interior; fortunately, many of them have light colors and can be easily repainted. The process of painting plastic from an aerosol can requires not only a respirator and gloves, but also a degreasing liquid and a primer. During operation, it is important to prevent the formation of drips.

Another way to improve the appearance of plastic elements is to cover them with carbon film. According to many car enthusiasts, this material is durable and looks impressive. The blanks are cut with a margin of 20-25 mm at the edges, after which the film is glued to a degreased surface. Edges and curves are blow-dried to prevent kinks and kinks.

The question of whether the Lada Priora needs modifications with its own hands is often raised on various forums and sites on the Internet. And if necessary, then what? Today, eight years after the start of production, tuning this car no longer seems like simple fun. After all, just a few years ago, the car already looked quite attractive both inside and outside. But time dictates its principles, and one must obey. It can also be said that improving the Lada Priora today is by no means an idle matter and is quite necessary, both for completely new ones and for cars that have already covered a certain mileage.

Do-it-yourself modifications to the Lada Priora usually concern various components of the car, which has already become legendary among its compatriots. These are both internal and external improvements available to every owner who wants to upgrade their pet.

Updating the appearance

Pinout of the Lada Priora comfort block
The field for tuning in relation to this model is quite voluminous. The car is subject to both external and internal tuning.

In terms of external tuning, the following is most often installed in a car:

Wheels of increased diameter and a different pattern. The manufacturer has provided the possibility of installing larger disks (up to 16 inches). Most often, the owner improves the car by purchasing light alloy wheels - their cost is quite affordable, and the choice of wheel designs is huge. Forged wheels are less common, since the number of patterns is limited, and the price is almost twice that of alloy wheels;
Installation of additional linings, spoilers, bumpers for the car. Many auto component manufacturers produce special kits for external tuning of the Priora hatchback. The average cost of a complete set is about 15,000 rubles;
Installation of new optics. To radically change the appearance, owners install bi-xenon units and change the color of the reflectors;

In the photo, tuning Priors hatchback:

Some car enthusiasts change the headlight units to LED ones and tint the taillights. All of the tuning examples given are suitable for both black and white cars, however, to achieve the best effect, the color scheme of innovations (spoiler, bumper, wheel color) must be in harmony with the body color.

In the video - tuning the interior of a Priora hatchback:

But the information from the article will help you understand what reviews about chip tuning Lada Vesta currently exist.

It will also be interesting to learn about what kind of tuning you can do with your own hands for a Lada Granta car in a liftback body.

Hinged roof rack

For lovers of outdoor activities and avid summer residents, a hinged roof rack will be of great help in completing their tasks. There are many models available for purchase, both from famous manufacturers and low-quality Chinese products.

Hanging roof racks are divided into several types:

Products from heaven. The most budget option (2000 rubles), a universal trunk. Installed using cross bars. The workmanship and durability leave much to be desired (although there are exceptions). The load capacity does not exceed 60 kg, and installation often involves fine-tuning the part for the car;

High quality Chinese products. The cost starts from 3500 rubles. Unlike their cheap counterparts, they are made of higher quality material, in compliance with production technology. Their load capacity reaches 75-80 kg, and installation is simple and convenient;

Expensive luggage racks from famous manufacturers. They are distinguished by their high cost (from 7,000 rubles), excellent quality and ease of installation. The maximum load capacity reaches 100 kg.

Installation of the hanging roof rack is simple and not particularly difficult.

You can do everything yourself:

Cross bars are installed on the roof of the car.
Using special fastening devices on the arches, they are securely attached to the body.
Then the roof rack itself is installed on top. Typically, the arch mounts are locked with a locking device to prevent theft.

On video tuning Lada Priora hatchback:

https://youtube.com/watch?v=_V3_80T7L_M

Body kits

Installing body kits for this model is a common method of external tuning. Installation of body kits will require the owner to have a simple set of tools - a screwdriver, a meter, a level, a drill with a set of drills, double-sided tape, and degreaser.

On video 3D tuning of Lada Priora hatchback:

But how tuning the interior of a Lada Kalina is done, and what you can do with your own hands, is described in great detail in this article.

It will also be interesting to learn more about how tuning a Kalina sedan car is done with your own hands.

The installation process of body kits occurs in several stages:

First, you need to try on the part at the installation site (side body kit - trim) and mark the attachment points to the body;
Then the place of contact with the body must be degreased;
Using a drill, make additional holes (if molding is being mounted, using double-sided tape will suffice);
Using self-tapping screws, secure the new part to the body.
When installing the bumper, it is necessary to dismantle the factory part and if all the holes match the tuning one, then install the new one on the standard mounts.

Tuning the interior of Lada station wagon

Poor noise insulation and vibrations in the cabin are recognized as a problem for any Russian-made car.
Therefore, reducing noise in a car is one of the important stages on the path to comfort. A wide selection of high-quality materials for this procedure will solve the problem without much effort. After good sound insulation has been installed in the car, you should examine the fastening of the upholstery and plastic in order to prevent “crickets” in the car. Each owner approaches tuning the Priora’s interior creatively, because he knows what he needs in order to feel cozy and comfortable in it.

External tuning of Lada Priora hatchback

Communities Lada Priora Lada Priora Club Blog Alternator belt length EURAir conditioner

Lada Priora is a completely new car, which for the most part does not need modification, but still, with the help of tuning, its qualities can be improved.

The first step is to remove the shortcomings that are already associated with the hood and doors out of habit. The hood is stuck in the Middle Ages, and in order for it to stand properly, manufacturers decided to use the time-tested “Poker” in the old fashioned way, but this problem can be solved by installing hood stops, which often have a universal look.

Doors are a sore subject for the entire AvtoVAZ concern, as they lack sound insulation when closed. This problem can be solved by replacing the locks with a vibration-absorbing design, included in the kit, which also includes noise-absorbing bolts. To enhance the effect, you can also glue noise-absorbing material, which will soften the impact when closing the doors.

Then it comes down to the appearance of the car. The vinyl base, which nowadays often forms the main part of the beauty and elegance of a car, can easily be used on the domestic Lada

You can choose either a vinyl pattern and cover the entire car body with it, or pay attention to a chrome film for covering parts of the car body kit, in the form of a bumper, hood, wings. With a large monetary contribution, you can please the appearance of the car with airbrushing

Airbrushing has long been used not only in the automotive business. Using it, you can even apply your own design, which will fit perfectly into the overall design of the car with a new body kit. You can even order someone's photo to be applied, but this may look stupid and ugly due to the sharp transitions and corners in the car.

The appearance of the Lada Priora can also be modified due to the chrome base. This film repeats almost the colors of all available metals, and even gold color can be found. The advantage of such a film is that it really makes the car unique and noticeable on the road, but a problem may arise due to a disagreement with the traffic police, especially in the sunny summer months. All this is due to the strong reflective base and glare that will disturb other road users.

Carbon fiber coating looks very strong on any car, especially the new generation film. Previously, carbon fiber with a 2D image was used, but it was replaced by an expensive, but improved in appearance, 3D carbon film, which in some cases can make a complete imitation of the carbon fiber coating of the entire body or some of its parts.

The Lada Priora's body kit looks unique, but new features force drivers to take a closer look at the details for improvement. Particularly eye-catching is the spoiler, which can give the car the appearance of an airplane and, in addition, improve its performance. A correctly chosen spoiler makes the car ride more aerodynamic, makes it easier to control and even slightly lowers the bar for fuel consumption.

Another step towards improving the Priora is replacing the standard muffler with a new one. Muffler models can split the car into two parts, which gives it power and an animal look. The shape of mufflers can be very different, but in the form of a unique Priora shape, a round Japanese muffler with two outlets on the sides of the rear bumper is best suited.

Contrast can perfectly highlight the new parts installed on the car, namely bumpers, sunroof and sills.

Those who like to improvise with the Lada can use sensational tricks from films, namely installing doors on the car that open upward or a hood that opens on the sides, although such an upgrade will be expensive.

Bumper tuning

VAZ Priora 2171 MT 98 hp 217130-139-0323 2013 Station wagon. Lada 217130 photo

Many body kits that can now be found on the market for the Lada Priora are sold individually, that is, you do not need to take the entire set and you can save money on this. To give the car an aesthetically complete look, you only need bumpers.

Sniper series bumpers were confidently used on the Grant model, but on the Priora they look no worse. The bumpers are placed on standard car mounts, and the work can be done independently. The bumper material is ABS plastic, lightweight series, can withstand a variety of external factors from severe temperature changes to exposure to oils, gasoline, solvents, alkalis and salts, which is especially beneficial in the winter season. The front bumper already has a hidden cutout for a tow rope.
The AVR series bumpers have the same characteristics as those of the Sniper, but can be custom-made to match the color of the car, which already eliminates a number of problems. The material of the body kit is fiberglass, which can also withstand many external and mechanical damage factors, but weighs a little more.
The “I am a robot” bumper is made of lightweight plastic, has a smooth and clear shape structure, and can be installed on standard mounts. Does not require additional intervention to create seats. Solves problems with engine cooling due to a wide air intake and an already built-in radiator grille.
There are special covers for the standard rear and front bumpers that do not require replacing the body kit, but add and almost completely change the appearance of the car. As a rule, the standard material for such linings is ABC plastic. Front bumper skirts prevent dirt and dust from getting into the radiator grille and directly onto the bumper itself.

Lada Priora Lada Priora

The popular Russian car Lada Priora is available in 4 body types: sedan (VAZ-2170), station wagon (VAZ-2171), hatchback (VAZ-2172), coupe (VAZ-2173) and in several trim levels, which undoubtedly makes this car convenient for different people. Lada Priora replaced the popular and beloved Lada of the 10th family and was created for our Russian roads and our harsh climate. Safety, efficiency, ease of maintenance, suitability for our fuel - the designers took care of all this.

Lada Priora is equipped with power steering EUR or power steering, 8-valve (81 hp) and 16-valve (98 hp) engines, with a declared resource of 200,000 km. The new engines have a lightweight connecting rod and piston group, which increases engine power by 10%.

The body of the Lada Priora has been strengthened to improve passive safety, and the torsional rigidity of the body has also increased. The Priora is equipped with airbags: in the “Norma” configuration – a driver’s airbag, in the “Lux” configuration – side and front airbags for the driver and front passenger. The “Lux” configuration is also equipped with seat belt pretensioners, ABS, BAS and ESC systems, fog lights, parking radar, heated front seats and windshield, electric windows on all doors, cruise control, rain and light sensor, multimedia and climate system, combination devices with GLONASS. According to the Lada Priora promotional website, when impacted at a speed of 5 km/h, only the bumper is damaged, without affecting the other structural elements of the body. The environmental friendliness of the car complies with Euro-3 standards for the Russian market and Euro-4 for the EU market.

Do-it-yourself tuning and repair of priors

To date, a large number of various improvements and bug fixes for the Lada Priora have already been implemented, and we have collected them. The main focus of the site is on topics such as do-it-yourself repair and tuning of priors, and on the topic of styling - both interior styling and exterior styling. Here you will find a high-quality selection of photographs and photo reports, materials on modifications, repairs, styling and tuning, as well as many useful tips on car maintenance and operation. You will find real answers to many questions that arise during operation, information on the modification and repair of various components. All materials related to modifications, repairs and tuning are presented “in pictures” for ease of perception and clarity.

Would you like to share your achievements? Write to us!

Many of us have made some modifications, and we undoubtedly want our work to be appreciated by other owners of the Lada Priora car. You can send us a photo report of the work done with a detailed description, we will publish your work, and it will be appreciated!

Improvements in the interior

Lux salon

If your car is not luxury, then you can give it this manually by purchasing an additional interior lamp from Priora Luxury, installing heated seats, sun visors from Luxury with a mirror. All these spare parts and accessories are sold in any car spare parts for Lada Priora.

Cases

Every car owner would like his car to remain in new condition for as long as possible. During use, seats are subject to a lot of wear and tear. In order to preserve the original appearance of the seats, it is best to put covers on them. There are a large number of different covers for taste and color. The cost of covers for a Priora varies from 1,500 rubles to 5,000 rubles, depending on the quality of the materials.

Steering wheel cover

With active driving, by 100,000 km, the steering wheel of the Priora begins to wear out. In order to protect it from wear and tear and an unsightly appearance, it is best to put a braid on the steering wheel. There are two types of braids that are put on the steering wheel and that need to be sewn together. Slip-on braids are easy to install, but do not completely cover the steering wheel. Stitched braids completely cover the steering wheel and protect it from damage, but are quite difficult to install.

Replacing Heater Switches

The interior heater switches in the Prior are not very nicely designed. In order to give them a more modern and beautiful look, they can be replaced with switches from Ford Focus. Such switches are not expensive and fit into the place of the standard Prior ones without any modifications. You can order them on AliExpress.

Rugs

Most of the time a person is inside a car. Therefore, it is important to maintain the frequency there. To do this, we will be helped by special EVA mats that perfectly retain moisture, unlike standard ones, and do not allow it to spill outside the mat. This is very important in winter, since snow that gets into the car with your feet begins to melt and form puddles in the cabin that can spill and an unpleasant smell of dampness in the cabin cannot be avoided.

Side mats

You can also install side mats between the door and the seat to protect your carpet from dirt. Such rugs are not expensive, around 400 rubles.

Tuning the trunk of Lada Priora

The trunk may not be the main part of the car, but the fact that it can be perfectly remade, especially in a car model like the Lada Priora, is for sure. So, for example, the luggage compartment is often filled with all sorts of tools, which rattle while driving, and at the same time make it difficult to put any additional parts on it. That is why it is better to make a cutout from plywood, paint it, and make a kind of second floor in the luggage compartment. It can also serve as a place where audio components can be inserted.

The big disadvantage of the luggage compartment is that the backlight works in it, but only when the dimensions are on, and this is very annoying, but such a factory defect can be corrected. Two wires lead to the lamp in the trunk, namely the yellow-red one for ground, and the yellow one, which is connected to the dimensions. All that is needed for independent lighting of the luggage compartment is to redirect the yellow wire with a current supply of at least 12W. The easiest option would be to connect the lamp to the amplifier, if there is one in the trunk; otherwise, it is best to use the help of the lamp in the cabin itself.

Lada Priora, a sedan type, does worse than all other models in the luggage compartment, since the lighting there is dim, which is especially bad in winter at night. This problem can be corrected with the help of additional LEDs. To do this, connect two LED strips to the luggage lamp, and they are attached with double-sided tape. The driver, as a rule, chooses the form of lighting himself, which once again confirms the advantages of this method.

Do-it-yourself technical tuning of the Lada Priora car interior and photos of implemented options

A large field for experiments in the field of individual auto tuning is provided by RGB strips complete with drivers. The bright footlights for the front passenger and driver look good. Due to the control driver, the lighting intensity and color are adjusted. Is there any rational grain in this revision? Without fanaticism, such illumination will help you get out in the dark, but otherwise...

Audio tuning VAZ-2170

The standard VAZ audio system, as our audiophiles assure, does not meet high sound standards. Seriously, this is the case, and it would be nice to increase the diameter and install branded speakers by 16 cm. In some photos of tuning the interior of a Priora car with your own hands, you can see that the seat for the speakers in the doors will have to be cut. It is imperative to perform noise and vibration insulation of the door walls to avoid resonance phenomena in the future.

In addition to wideband speakers, experts also recommend installing tweeters. They are located on the dashboard or at the top of the door card. Broadband speakers are also installed for rear passengers, and to emphasize low frequencies, space for a subwoofer can be arranged in the luggage compartment.

Other technical options

If you are going to start upgrading your audio system, then it is advisable to turn your attention to some kind of full-fledged multimedia center with monitor outputs. This will already be a guarantee of high-quality playback of music tracks.

To all that has been said, it’s a good idea to add a good monitor that will not let you get bored in traffic jams and will allow you to relax in the parking lot during long trips. It wouldn't hurt to take a closer look at the range of on-board computers for Lada Priora.

Restyling of the VAZ 2170 interior

Priora tuning will help make the interior as comfortable and unique as possible. The Lada style can be seen in the interiors of all production cars produced by AvtoVAZ, which especially encourages car enthusiasts not only to change the design of the instrument panel, but also to improve the sound insulation of the doors, roof and trunk of the car, as well as replace the trim of these body parts.

First of all, the front panel can be replaced, which is done by installing custom or purchased kits. You can only install the LEDs and decor with your own hands using decorative film. LEDs can also be used to complement the interior door handles, trunk lid and illuminate the footwells of the driver's and front passenger's seats.

Interior refurbishment

The updated cases, made of high-quality textiles or leather in a pleasant color scheme, look impressive. The main thing is that all the interior parts are combined with each other and complement the overall style of the car.

What is needed to improve a car?

Chip tuning
is just about installing the necessary programs. To do this, you need to know various resources well or have a familiar programmer.
Body kits and spoilers
are installed using double-sided tape or self-tapping screws; you will also need a drill to make the cuts. Well, you also need the spare parts themselves: spoilers on the edges and body kits on the front part.
Optical tuning
can be done using eyelashes, LED strips, and tint films. For installation you need the materials themselves and a soft cloth.
Alloy wheels are installed in the same way as regular ones
. In order to exchange old ones for new ones, you need wrenches of the right size and a jack.
No tools are needed to tune the interior
. It is only important to buy covers, remove the old ones and install new ones. You can also put updated floor mats. And for the steering wheel, you can buy a special device that will help you switch music and fully control the player even while driving.

Tuning the Lada Priora engine

Lada Priora with standard factory engines with 16 valves does not seem to evoke much desire to modify it, since, contrary to popular belief, it is much more powerful and dynamic than the engine that is installed on “nines”. Still, sometimes you want to make your car faster, and with the Lada Priora a supercharger compressor can help, which can increase the power and traction force of the engine by 30-50%, without the need to go into details of the operation of the injector or gas distribution when installing it. Installation is carried out using fastening units that are attached to the crankshaft pulley. Power increases due to the enrichment of the fuel-air mixture, but it also has its negative qualities. After installation, fuel consumption increases significantly, which leads to rapid wear of the fuel system and accumulation of paraffins.

From the point of view of comparing useful and negative qualities, turbocharging wins due to increased efficiency, but at the same time without spending a large amount of fuel. A mechanical supercharger, or in our case a supercharger, takes some of the energy from the engine, while the turbocharger works exclusively on the energy of exhaust gases. The only cost will be that the turbocharger takes about 10 liters. pp., in order to overcome the resistance arising from the gases of the exhaust manifold. Here you can also find some negative aspects, at least in the fact that the turbocharger requires a lot of careful maintenance, due to the lack of depressurization of the connections. That is why racing enthusiasts, when using turbocharging, must ensure constant oil changes to ensure its cleanliness and the flow of coolant.

If you increase the design volume of the cylinders, you can increase the engine power without any problems. This work is carried out after boring the cylinder blocks and turning the remaining walls, and this will give a large volume of the combustion chamber. The friction of the pistons immediately stops rubbing against the cylinder walls, which adds ease to the rotation of the crankshaft and a subsequent increase in power, and at the same time the dynamic impact on the piston system increases. There is another method that is designed to increase the volume of cylinder blocks. To do this you need to use low pistons, but the crankshaft must be high. With such changes, the stroke length of the piston connecting rod changes. The piston begins to rise higher into the combustion chamber, which increases the level of fuel compression, and then lowers, creating more rarefaction there. This significantly changes the ventilation of the entire system, making it better, which leads to a faster enrichment of the fuel-air mixture.

If you continue to work and modify the cylinder head, then the engine power will increase not only at low, but also at high speeds due to the increase in engine volume.

A little information

The history of this family of passenger cars began in 2009, when the first sedan, designated 2170, rolled off the assembly line. Following it, a year later, a station wagon appeared, which was labeled as 2171, as well as a hatchback 2172. But as already noted, the largest Among these three cars, the station wagon gained popularity.

In the process of creating these cars, the designers used previously well-proven components and assemblies. The same components of the car that caused criticism were replaced. In general, Priora received more than 200 new elements and components that had not previously been used on VAZ cars. The creators did a good job with the interior of the car and its exterior.

As for the characteristics of the Lada Priora station wagon, these cars received quite reliable naturally aspirated 1.6-liter engines, with a 16-valve timing belt, producing 96 hp. With. This engine allows you to accelerate the car to a maximum of 183 km/h. At the same time, the fuel consumption of the Priora station wagon in city conditions is 9.8 liters, while on the highway consumption drops to 5.6 liters.

External tuning of Lada Priora

Body tuning

First of all, it’s worth tackling the Priora’s hood, which often has an incorrect position and is crooked, which disrupts the sound insulation when the car is moving. You can solve this problem yourself by replacing it with double-sided universal hood stops.

The next step is to improve the sound insulation of the doors by placing special noise and vibration-absorbing materials in their cavity, as well as replacing the standard locks with new ones with improved vibration-absorbing properties.

Vinyl wrapping

To protect and decorate the body, a vinyl base or carbon film is used, which is ideal for external restyling of the Priora. It can be used both as a pasting for individual car parts and as a stylish design on the hood or doors. There is also a large selection of films known as chrome base, which imitate metallic finish and highlight the prominent lines of the car.

Individuality for a sedan can also be achieved by applying a stylish airbrush design, but this will require a lot of money. A separate part of the Priora restyling is the installation of a spoiler, which improves aerodynamic properties and stylishly complements the appearance of the Lada Priora sedan.

Tuning the standard muffler by replacing it with a new one with a double outlet will give the car an aggressive and powerful look.

Chassis tuning

The performance quality of the Lada Priora chassis can be improved using a double-diaphragm vacuum booster, which increases the reliability of the brakes by 2 times.

It is also recommended to install discs with a metal-ceramic coating and stiffer springs in the clutch basket. This is an important safety issue while increasing the power of the car's engine.

The installation of a lightweight crankshaft flywheel will reduce the time it takes to accelerate the car to maximum speed, which will also reduce fuel consumption, reduce the load on the clutch and extend the service life of the gearbox.

Low profile tires

Replacing rims with low-profile tires will advantageously highlight the appearance of the Lada Priora.

Tuning headlights and glass

Restyling of lighting devices will improve the quality of light signals and will advantageously change the appearance of the Priora sedan.

Tuning car headlights involves the following work:

tinted rear lights;
installation of eyelashes;
combination of turn signals and dimensions;
installation of bi-lenses;

Tinting the taillights gives your car a unique look by applying vinyl to the removed glass of the rear light fixtures. The eyelashes of the headlights are formed using plastic blanks covered with vinyl film. You can also purchase ready-made eyelashes from a wide selection on the car market.

You can improve the turn signals on Lada Priora by replacing the 2-pin LED lamp with a 3-pin one, which should be connected to the headlight outputs. The quality of the headlights' glow will be enhanced by bi-lenses, which add beauty thanks to the pleasant blue xenon light.

Eyelashes for headlights

Car enthusiasts often tint their car windows themselves. But it is better to entrust this work to an experienced specialist, otherwise there is a high probability of minor defects that cannot be corrected.

Tuning bumpers and sills

Replacing bumpers on a Priora is one of the simplest and most effective ways to radically change the external features of a car. In addition, a well-chosen body kit improves the aerodynamic qualities of the car, protects the body from mechanical influences and ensures maximum natural cooling of the engine by counter-flow of air.

The thresholds of the car can also be restyled. A wide selection of parts of suitable sizes with different width parameters will allow you to choose a worthy replacement for every taste and budget.

Radiator grille tuning

When tuning a VAZ Priora, you should pay special attention to replacing the radiator grille, since this part is responsible for cooling the engine. It can be replaced either together with the front bumper or separately

The grilles, made in the form of a honeycomb, additionally protect the engine from large debris when driving and chemical elements during car washing.

External alterations

The front bumper is what is undergoing changes in the forefront. There are a lot of options available, from a dozen of which you can choose a unique look that turns the car almost into a work of art.

Carbon film, which is now applied by every owner who respects himself and his car, is also in particular demand among owners who love innovation. Just remember that you shouldn’t overdo it with the pasting. It is enough to seal the hood and pillars, and your pet will take on a new look.

Among the quite affordable tuning, you can offer to install alloy wheels and lower tires. This will give your car additional sportiness. And some, in addition to everything else, make LED lighting for wheels, rims, underbody, headlights, and trunk. This is quite simple to do using a Velcro LED strip connected to the power supply. But these transformations are more likely for lovers of night excursions around the city. They make the car look amazing!

A more complex external tuning is the installation of lambo doors (for those who don’t know: these are doors that go up). This process is quite labor-intensive, and only true lovers of improvements can do it, who sometimes shell out tidy sums for tuning their cars. But with Lambo doors it will look like Agent 007!

There are also more radical improvements to the body concept, after which the Lada Priora can be transformed beyond recognition. Plastic linings for a special project, body kits, blowers, spoilers, anti-wings, a powerful exhaust pipe, gills on the hood - all this gradually turns the Lada Priora into a real airplane. But it will also cost a lot of money for the owner.

Radiator grille tuning

The radiator grille on the Lada Priora can be changed in two ways. The first is together with the front bumper. The second method looks much better from an economical point of view, since the grille is made to order to standard dimensions and fastenings. There are several varieties. Four-lane grilles are distinguished by their excellent throughput and engine cooling, but the downside of this part is its low protection from falling various types of debris. Grilles, consisting of numerous honeycombs, have a low air capacity, but can perfectly protect the engine from not only large debris, but also chemicals. elements while washing the car.

Basics of mechanical tuning

Any engine, for a slight increase in power, must begin to breathe easier and easier, and in the Lada Priora, this effect is usually achieved using the “Spider” installation. This is a popular name, but in fact, this part is a manifold with channels of a larger cross-section, which provides a lighter exhaust outlet without creating obstacles for it. Problems may arise with oxygen supply sensors, but after flashing the firmware for Euro-2, the problem disappears, and it is also possible to dismantle one of the sensors. After this modification, engine power increases by approximately 9.5 liters. With.

Gadgets

Automotive electronics is developing by leaps and bounds. More and more new gadgets are appearing on sale, designed to improve the driving process itself. But in reality, sometimes we see the opposite. So don't get carried away. Try to get by with only the most important and necessary things that really improve the quality of your ride.

These necessary things probably include a good on-board computer, a powerful multimedia system, high-quality sound from speakers, a video recorder, and climate control.

Improve performance:

It may also be a good idea to flash the engine, install a compressor, rework the crankshaft, strengthen the transmission, install a spider for a smoother exhaust, and strengthen the brakes. Here everyone already makes modifications to the Lada Priora with their own hands, based on the available funds, skills and strength.

Priora engine tuning increasing dynamics and economy

The power unit on the latest production Lada Priora is a 1.6-liter 16-valve engine, modification 21127, with a power of 106 hp. Earlier Priora models are equipped with engines with lower dynamic performance. For this reason, Lada owners strive to reduce fuel consumption and increase engine power through tuning.

The task of modernizing the VAZ 2170 engine can be solved by performing the following work:

installation of a supercharger compressor or turbocharger (turbocharging);
engine chip tuning;
changing the design parameters of the engine (increasing the cylinder displacement, replacing pistons and crankshaft);
external engine tuning.

Installing a supercharger compressor does not require much time and effort. As a result, there is an increase in power from 30 to 50%, which entails an increase in fuel consumption. The supercharger is attached using standard fastening units, the drive is carried out by putting a belt on the crankshaft pulley, which increases engine productivity.

Turbocharging is considered a more effective option for increasing engine efficiency compared to a supercharger, since it operates using exhaust gases. However, a turbocharger is more capricious in operation than a mechanical supercharger, since it requires constant cooling and the presence of clean oil.

Engine chip tuning is aimed at reducing fuel consumption and improving the dynamic performance of the engine by reprogramming the electronic units through which the engine is controlled. The presence of a wide range of programs for chip tuning allows you to influence certain parameters of its operation, adjusting each of the indicators at the request of the owner. Such manipulations are carried out only by experienced specialists without changing the design of the power unit.

Increasing the working volume of the cylinders by boring and polishing their walls leads to an increase in power and fuel consumption. Thus, the force on the pistons increases and their friction against the cylinder walls decreases, which leads to an increase in engine power. The productivity of the Priora engine can also be increased by replacing the piston group and crankshaft. In this case, special low pistons and a crankshaft with increased lift are selected, which allows the pistons to be raised and lowered to maximum levels, facilitating better filling of the combustible mixture with air and its complete combustion.

Chip tuning

After reworking the power plant, you will definitely have to do chip tuning in order to adjust the operation of the power and ignition systems to the new conditions.

It is noteworthy that chip tuning is also quite applicable for cars that do not have any design changes to the engine. Reflashing the control unit will improve the dynamic and power performance of the car (by about 15%). At the same time, the costs for such tuning will be minimal, since nothing needs to be altered in the engine for this.

But it is worth noting that it is better to entrust chip tuning to professionals who know exactly how everything is done, otherwise the result may be completely opposite.

Aesthetic modernization

If you are a caring owner of a Priora, direct tuning to improve the appearance of the car. In this case, your “iron horse” will be difficult to compare with similar models. The original Lada Priora will be able to surprise those around you with the perfection of its external structures and amazing exterior.

Exterior improvement

We recommend that when tuning the Lada Priora, you must equip the car with a new bumper and hood. Fortunately, even the manufacturer itself, focused on the fact that many modern owners strive to improve the vehicle after purchase, offers suitable options for components, after installing which you can immediately enjoy the excellent result.

By the way, if you purchase a bumper, hood or any other device produced by the Volzhsky Automobile Plant specifically for the Priora, tuning it yourself will be much easier, since all the fasteners will correspond to the original “iron horse”. New bumpers can be made of plastic or fiberglass. The use of such simple body parts not only helps to improve the appearance of the car, but also has an excellent effect on improving some technical parameters.

In particular, the cooling rate of the engine can be significantly improved due to the introduction of a fairly wide air collector. In addition to the bumper, you can equip the body of your “swallow” with a spoiler that improves aerodynamic characteristics, as well as body kits that are not at all difficult to find on sale. If you want to transform your Priora beyond recognition, tuning should include replacing the decorative grille, the design of which can be completely different. It all depends on your desire, abilities and financial capabilities.

By the way, some unique bumper designs with decorative grilles can be designed on your own if you have at least some technical modeling skills. If you don’t have such skills, but have a great desire to get an original bumper, you can turn to craftsmen who, for your money, will be ready to fulfill any whim, as a result of which your tuned Lada Priora will become completely unrecognizable.

You can also increase the originality of your car by installing eyelashes and new headlights. Some owners tint all the optics, as well as the rear window and the glass on the side doors. If you want to radically change the Lada Priora, direct tuning to change the color shade of the body of your “swallow”. Of course, it may be irrational to completely paint the entire car, but covering its individual parts with vinyl or airbrushing them is quite possible.

Interior tuning

After you have managed to transform the outside of your beloved Lada Priora, direct the tuning to modernizing the interior. The interior space will be significantly transformed if changes are made to the lighting system. Instead of incandescent lamps, we recommend that you install LED lamps. The interior will look quite interesting if additional LED lighting is installed. In particular, you can interestingly highlight door handles and the floor of your vehicle. It will be possible to increase the level of lighting if you install an additional lamp in the rear part of the cabin.

The Priora will become much brighter if the do-it-yourself refinement process is aimed at improving the aesthetics of all plastic parts. They can be covered with carbon film or artificial leather. The interior will look very original if its individual parts are flocked. This is an innovative technology during which the surface is covered with flocks that look like vinyl covering.

Do not try to calm down your technical and creative impulses, let your imagination flourish wildly, which will contribute to the emergence of new interesting ideas aimed at improving the external aesthetics of your “iron friend”. Many car owners extend their actions even to the trunk, decorating it with LED lighting and creating additional space for storing tools.

We improve technical indicators

The Priora station wagon model is already quite well equipped from the factory, which makes it a completely modern car. We are talking about standard equipment of cars with parking sensors, all kinds of sensors, airbags, automatically controlled optics and much more. The designers also announced a possible increase in the power of the power plant, but it is unknown when the new engine will appear. Those who don’t want to wait for an update to this car do tuning the Priora station wagon with their own hands to improve the car’s performance.

It is best to start tuning a Priora station wagon with the technical component. Making a number of design changes can improve the engine performance quite well. But carrying out such modifications is a costly and time-consuming task. But such tuning Priors can “boast” of an engine with increased volume and, accordingly, power.

The essence of engine modification is to increase the volume of the cylinder by boring them. Together with the block, its head is also being modified, in which the cross-section of the windows has to be increased, followed by grinding. In addition, when assembling the power unit, it is recommended to use tuning and lightweight components - valves, flywheel, intake and exhaust manifolds, etc.

It’s worth starting tuning a Lada Priora station wagon from the engine, if only because this is the most difficult part of modifying the car. And if you managed to improve the engine, other types of improvements are already easier to carry out.

If you take the transmission, it does not require any special modifications. One of the options for improving this part of the car is to install a short-stroke rocker on the gearbox, as well as install self-locking differentials in the drive. In general, the tuning of the transmission can be considered complete.

A little on the suspension. In the factory version, the ground clearance allows this car to be driven on any road. But many car owners, in the process of modifications, lower the car by shortening the suspension springs, but it is better not to do this. On the contrary, to increase the load capacity and ensure good cross-country ability, it is better to increase the ground clearance of the Priora station wagon, for which special spacers are used in the suspension struts.