Lada Granta wheel bolt pattern: which ones are suitable and which ones to choose, table of ideal wheel and tire parameters

The main element of the wheel is the rim. It is designed to fix a car tire and attach the entire structure to the drive - transmitting torque from the engine and gearbox. Lada Granta wheels differ in production technology and materials used. The choice of wheels is determined by car enthusiasts based on the parameters of width, radius, and appearance.

Standard Lada Granta wheel sizes

Depending on the vehicle's configuration, it may use tires and wheels of different diameters and widths. The year of manufacture of the car also plays an important role.

The first generation of Lada Granta was equipped with wheels with the following parameters:

Many people mistakenly perceive the letter R as a “radius”, but in fact, it only means the structure of the tire – radial. The numbers after the letter R are the diameter of the disc in inches.

Since 2022, the configurations have changed slightly. Now tires and wheels are installed in the following sizes:

These are all the standard sizes of tires and wheels that are installed on the Lada Granta from the factory.

Is it possible to install wheels of size R16 205/55 on the Lada Granta

Wheels with a radius of R16 and dimensions of 205/55 are not suitable for both the regular LadaGranta configuration and the Sport model. Due to their too large diameter, they will fit too tightly, which when driving will lead to rapid wear of the treads and reduced maneuverability of the vehicle. Owners of Lada Granta recommend installing 195/50 or 205/45 with a radius of R16.

What are the maximum wheels you can put on a Grant?

It is worth noting that the permissible tire and wheel sizes must not be exceeded. It is not by chance that the manufacturer sets these restrictions.

First of all, a large wheel will touch the arch or fender liner and prevent the wheel from fully turning when cornering.

The second point is the huge load on the wheel bearings. The larger the diameter of the wheel and the more it weighs, the more the bearing is loaded. Eventually, it begins to hum due to wear and tear and fails.

The maximum wheel and tire size allowed by the manufacturer is as follows:

• 185/65 R15;
• 195/60 R15;
• 195/55 R16;
• 185/40R17.

Many car owners managed to replace the standard tires with size 205/70R16. This can only be done on a Lada Granta Cross and then with a lifted suspension. But this is nothing good for the car.

When replacing disks, it is important to install the appropriate bolts and observe the wheel bolt pattern of the Lada Granta - 4x98.

This list can be continued indefinitely. The fact is that the profile also affects the possible diameter. The smaller the tire profile, the larger the rim that can be installed on the car.

It is worth noting that Granta has the potential to install larger wheels. For this purpose, a special limiter was even provided on the standard steering rack, which prevents the wheels from touching the fender liners with a large turnout.

Selection of wheels for Lada Granta

Car owners prefer to install cast wheels made of light alloy materials. The most common sizes are R14, R15, R16. Wheel rims with sizes R13 and R17 are less common. In the first case, the wheel is too small and does not look good, and in the second, it is too large and can cling to the fender liners and arch when performing various maneuvers. All-season, summer and winter tires for Lada Granta are suitable for standard sizes.

Tire size chart

Unlike the standard sedan, the Lada Granta Sport is already equipped as standard with 16-inch cast multi-spoke wheels, complementing the appearance of the sports version. The liftback is also complemented by these rims, but only in smaller sizes (R14, R15) and exclusively in the “Lux” trim levels. In all cases of changing wheels, you should follow some rules:

1. When choosing new rims, the main criterion should be adhered to not so much changing the car’s exterior for the better, but rather the design features of the car’s chassis, the quality of the road surface and the driver’s driving style. The maximum permissible wheel diameter on low-profile tires will look out of place on poorly surfaced roads. The assembled product will quickly fail on bumps and holes.
2. If wheels are selected for the Sport version of the Grant, then the size of the brake discs and calipers should be taken into account. Since these cars have larger brake mechanisms, in order to avoid touching the wheels, it is better not to install rims smaller than 16 inches.

Low-profile tires have higher dynamic characteristics, but are inferior in driving comfort to high-profile tires. For everyday driving, you should choose standard tires on a standard rim.

What tire pressure should be on Grant

In addition to the wheel size, it is also necessary to observe such a parameter as tire pressure. Do not forget that the pressure can be different and it accordingly affects the handling of the car and tire wear:

• Low pressure is dangerous when cornering. You can “take off” the wheel while driving. In addition, tire wear increases along the edges of the tread.
• High pressure - reduces the grip of the wheels on the road, increases the likelihood of a tire explosion, and tread wear increases in the middle.

Tire pressure should always be rated and depends on the vehicle load. Normal pressure is as follows:

• For R13 – 1.9 atm.
• For R14 and R15 – 2.0 atm.

When loading the car, you should increase the tire pressure to 2.1, 2.2, 2.3 in accordance with the weight of the load. This will help maintain tire traction and maintain efficiency.

Replacing disks on Grant

Before you start replacing wheels on your Lada Grant, you should prepare the following set of tools:

• jack;
• wheel wrench;
• screwdriver;
• pressure gauge and compressor or pump (may be needed if the tire pressure is insufficient).

Disk replacement is required in various situations. The wheel may be worn out, it may collide with an obstacle and, as a result, damage or deformation may occur. Wheels are also changed when tires are punctured. If the tire is tubeless, you can pump it up and continue driving to the nearest tire shop.

A deformed disc affects the car's handling for the worse - it holds the road worse, and you can feel the steering wheel wobbling. Alloy wheels can break, causing the car to fly off the road or cause an accident. Tubeless tires on warped rims are leaky and bleed air through uneven rim flanges. Driving for a long time with such problems is undesirable, so the wheels must be removed and replaced. Before starting work, it is better to wear protective gloves:

1. The car must be installed on a level area and not interfere with other road users by its location if the replacement is carried out on the road. The procedure is dangerous to carry out on sharp turns, on ring roads, on descents or ascents. It is necessary to turn on the hazard warning lights and display a warning triangle, as required by traffic regulations.
2. Now you should take out the spare wheel if you are replacing a punctured or damaged element. On the Grant, the spare tire is located under the carpet in the luggage compartment. You need to lift the mat by the loop and remove the spare wheel mounting bolt; this usually does not require additional tools. After unscrewing the bolt, you can take out the spare tire and lower the trunk mat.
3. If a stamped disc with a decorative cap is installed, you will need to remove the cap first. If a decorative trim is installed, you will need to unscrew the fastening screw with a screwdriver and remove it. There may not be a cover or a cap, besides, there are different fastenings, the most common are plastic latches, you just need to pry them off with a screwdriver and remove the cover by moving it towards yourself.
4. Using a wheelbrace, loosen, but do not unscrew, the 4 mounting bolts. It may take considerable force to break them off.
5. After this, the jack is installed in special places under the thresholds. If the jack is standard, it should fit into the rib with its groove; if an alternative tool is used, it is recommended to place a board or mitten under it so as not to damage the anti-corrosion coating. When replacing on soft ground, be sure to place a board under the jack, otherwise it may fall off.
6. Now you can unscrew all four bolts and remove the wheel.

The new wheel is installed in the reverse order of removal. In this case, it is necessary that the guide pins coincide with the grooves on the disk if it is stamped. The bolts are tightened “by hand” so that the wheel is firmly held in place. Now you can lower the jack and tighten all the bolts crosswise. To prevent damage to the discs, it is not recommended to use metal pipes for reinforcement or tighten bolts by pressing the wrench with your foot.

It is important to tighten the bolts exactly crosswise - this way the disc snaps into place exactly in the center. If you tighten the left and then the right bolts first, the wheel may move slightly, which will lead to poor handling and wobbling of the steering wheel.

After installing the wheel, it is recommended to check the tire pressure using a pressure gauge and, if necessary, inflate them. All industrial compressors have a built-in pressure gauge, so the task is simplified.

Is it worth increasing the Lada Granta track?

The track is the width between wheels located on the same axle. Increasing the track width allows the installation of wider wheels and improves vehicle handling, especially with a large suspension lift. But it’s clearly not worth increasing the track on Grant.

The track can be increased by using special spacers for the hub. Each car owner decides for himself whether to increase the track or not. But it’s worth knowing how this will affect other components of the car.

The fact is that the thicker the hub becomes and the thicker the wheel, the more the wheel bearing wears out. In addition, such tuning can negatively affect the drives. The grenades will be seriously loaded.

It is possible to carry out such tuning, but provided that a reinforced wheel hub is used, an appropriate bearing, and also paired with good drives.

A short checklist - How to buy tires for the Lada Granta correctly

1. You should look for the right tires, keeping in mind the factory dimensional specifications. The size of the selected tires must match these data. 2. Pay attention to the tread pattern. Driving comfort largely depends on it.

3. Pay attention to the width parameters. The acceleration and braking of a car is affected by the width of the spot converging with the road surface. 4. Particular attention should be paid to the bore diameter. Tires that are excessively high or wide can damage the suspension, while tires that are too narrow will increase the load on the bearings. 5. It is important to consider the maximum speed index and load capacity index. 6. Treadwear, Traction, Temperature and MaxPressure data provide information on the tire's factory wear life, braking performance, temperature resistance and pressure limit for the tire respectively.

How non-standard wheels can affect

Wheel parameters can affect vehicle handling and comfort. But it should be taken into account that the better the car’s handling, the worse this affects the comfort of the suspension.

The smaller the rubber profile and the larger the disc diameter, the better the Granta’s handling. In addition, fuel consumption increases, steering accuracy increases, but the noise of the tires and the vehicle's resistance to aquaplaning do not change. Of course, a large disc will negatively affect comfort.

Tire and wheel width can also affect handling, stability and increased tire wear. The width of the tires will also negatively affect the vehicle's resistance to hydroplaning, but can increase traction, provided the road surface is dry. Ideally, asphalt.

The width of the tires plays virtually no role in improving or deteriorating comfort.

A smaller rim means the use of rubber with a larger profile. Consequently, the wheels will be softer, which means increased comfort. But you need to understand that such a configuration does not fit in with improved handling.

Do not forget that the size of the disk can also affect the dynamic performance of the car. The manufacturer uses tire and wheel sizes at which speed and acceleration will be the highest, and the load on the engine and transmission will be minimal.

Deviation from these dimensions entails certain consequences - reduced dynamics, inaccurate speedometer readings and much more.

The width of the rims and their diameter can affect the suspension geometry. Therefore, after installing large wheels, it is necessary to do a wheel alignment.

If you install the wrong wheels

If you install wheels on your car that do not meet the factory specifications, the risk of the following consequences increases significantly:

• the efficiency of the braking system decreases;
• the level of wear of many elements of the brake system increases;
• the level of wear of many suspension elements increases;
• loads on the chassis increase;
• the level of general safety decreases;
• there may be friction between the wheels and other elements of the machine;
• reduction in the quality of steering;
• Extraneous noise and vibration may appear.

Since we are talking about a new version of the Grana (from 2022), many copies are still under warranty, and the use of unsuitable wheels may result in the car being removed from warranty service.

Alloy wheels

When choosing wheels for your car, the buyer needs to clearly understand the difference between them. If the question is about choosing between metal and alloy wheels, then cast aside all doubts and take alloy wheels, as they are better in almost everything.

The weight of the disc is reduced by almost half, which affects the quality of control and reduces the load on the suspension, and the appearance will delight the car owner with beauty. They do have one drawback: the quality directly depends on its price. Cheap discs are easily deformed when impacted, and it is almost impossible to repair them.

When choosing disks, you need to understand that they are different. Cast, forged and prefabricated are classified as light alloys. Alloy wheels are the most reliable and common, so many experts recommend buying them. Despite the fact that such disks are made from the same metal and using almost the same technology, they are distinguished by different casting methods.

Cast ones are considered higher quality because they are made from a solid metal alloy, which gives them greater strength. Actually, the name of all types of alloy wheels speaks for itself, which will prevent you from getting confused when purchasing them. And remember that in any case it is better to clarify the information with the seller, because it is almost impossible to distinguish them by external signs.

Let's sum it up

As you can see, 15-inch wheels on the popular LADA Granta model are not associated with subsequent driving discomfort and do not provoke difficulties during the installation process. We recommend considering cast versions of products that have these advantages and are more accessible due to their moderate price factor.

Reading time: 7 minutes

One of the most modern creations of the AvtoVAZ concern is the Lada Granta car. The model first rolled off the assembly line in 2011 and is still in production. The number of cars sold in Russia and abroad is more than one hundred thousand - this indicates the popularity of the model among drivers, since its spectacular appearance, improved quality of all parts, increased engine life, as well as a relatively low price make it one of the most popular today . Of course, all related auto parts are widely represented on the market, and one of the main ones are wheel rims.

Rating of the best winter non-studded tires for Lada Granta

Warm winters in our country are no longer a rare occurrence. The ideal solution for operation in near-zero weather is Velcro and studless tires.

Belshina Artmotion Snow

Description of the tire. A characteristic feature of these tires from the Belarusian manufacturer is an effective drainage system.

Transverse grooves intersect with longitudinal channels, which allows you to quickly eject slush and water from the contact area.

The presence of a large number of multi-directional lamellas enhances traction.

With their rigid upper edges they grip the track and allow you to move confidently on any surface.

Zigzag wide grooves running along the sides of the tires help maintain vehicle stability when maneuvering.

The contact blocks of the shoulder areas are effective lugs, which improves the cross-country ability of the Lada Granta.

Two central stiffening ribs help the car maintain directional stability.

Pros of Belshina Artmotion Snow

1. Long-term operation without wear.
2. Durable side parts.
3. Good grip on any type of surface.
4. Easy balancing.
5. Low noise level.

Cons of Belshina Artmotion Snow

1. Handling deteriorates at speeds above 90 km/h.

Possible disk options

If you pay attention to the standard size of the wheels, you can see that the Lada Granta has 4 possible variations (with a standard body):

• R13 175/70;

• R14 175/65 and 185/60;

• R15 185/55.

Alloy wheels are the most reliable

Installing alloy wheels can provide a comfortable ride in your car and make it stand out from the crowd. The main thing is to choose the right alloy wheels that will harmonize with the car and will not create inconvenience during maneuvers. It is also worth noting that the matter will not be limited to installing new alloy wheels on a Lada Granta car.

For maximum comfort, you need to choose the right tires, which will also make small adjustments to your riding style. The manufacturer has provided some information that you should rely on when purchasing tires, all of which have been slightly adjusted by the owners of such cars.

An important step is to change the image of the VAZ Lada Granta. Owners of tuned cars sometimes change the structure of the factory body, which affects the maximum possible wheel radius.

Think carefully about your decision before going to a store or tire shop to change your car's shoes to save your time and money. Taking into account possible tuning, those who like to transform their metal horse can purchase alloy wheels with a radius of R15 and higher. At the moment, the maximum allowed wheels are R17. With certain modifications to the body, alloy wheels of this size can be installed, this will not affect the maneuverability and behavior of the car on the road. However, owners of Lada Granta cars assure that in order to save fuel, they most often purchase light-alloy wheels no larger than R13, even though R14 or R15 are installed in standard factory equipment.

Winter tires for Lada Granta

The selection of winter tires for the Lada Granta should be based on the characteristics of the terrain on which you will have to drive. If the roads are not cleared enough, and the winter threatens frequent thaws followed by frosts, then in this case you should use studded tires.

Tires for winter use must have soft contact with the road surface, which will provide a reliable degree of traction even on packed snow, and the tread base must be rigid for precise steering. Goodyear, Pirelli and Dinlop Winter companies have the necessary dimensional characteristics for the Lada Granta, namely in the range from R13 to R16.

Winter tires will also require running-in to ensure they fit firmly in their seats. For a good break-in, you will need to drive about 500 kilometers. When running in, you should try to avoid sudden braking and slipping. To improve traction, it is also recommended to choose tires with a narrow profile.

Grant wheel caps as a low-cost but effective way of wheel tuning

The presence of cast or light alloy (whatever you like to call them), as well as forged wheels on Grants is perceived by the ambitious audience of our garage grant community as a sign of the financial well-being of the owner of such a car.

However, the use of caps on stamped-welded wheels can not only neutralize the value of both self-affirmation and self-expression of owners of top-end assemblies, but also significantly save on wheel restyling, without reducing the safety of using the car.

One of the significant disadvantages of stamped discs is the fact that they have low cooling capacity for the brake mechanism due to the fact that they almost completely cover it without providing proper airflow. While caps, with the appropriate aerodynamic configuration of the slots, can eliminate these disadvantages of steel disks.

How can I find out about the disk parameters myself?

The technical passport of a particular car contains information not only about what factory wheels it has, but also contains instructions for installing them. If this useful guide is not nearby, then you can arm yourself with a ruler and visually determine the characteristics of interest.

If you need to choose 15-inch wheels, you must have knowledge regarding such parameters.

1. “ET” (offset) - denotes the numerical expression of the distance between two planes, or more precisely: the surface of contact with the hub and the vertical plane of symmetry of a particular product. The indicated value is intended to indicate how much the disk is able to “peek out” from under the wing. The parameter affects the degree of stability of the car. Typically, the numerical criterion for overhang starts at 40 mm.
2. “DIA” is the diameter of the hole that allows the wheel to fit onto the hub surface. When choosing a product, you should take into account the corresponding hub parameter. The measurement is carried out in millimeters.
3. Bolt pattern (in our version 4x98). The first number in the formula means the numerical composition of the fastening bolts, and the second is the diameter, on the line of which the centers of the holes for fasteners are located.
4. Disc width. This ordinary characteristic is usually expressed in inches. For LADA Granta the following values ​​are valid: 5; 5.5 and 6.

Armed with the above information, even an inexperienced owner will be able to select a suitable set of disks, thereby replacing the factory disks.

What wheels are suitable for Granta?

The choice of wheels should be based on compliance with several important parameters, depending on the level of equipment of the Lada Granta car. Even with a great desire to install 15-inch rollers in the Russian car, we first recommend that you familiarize yourself with the set of characteristics below.

1. “Standard” configuration involves mounting disks with the following parameters:

• stamped products with a diameter of 13 inches;
• landing width is 5.0 inches;
• the overhang (“ET”) is 35 mm;
• bolt pattern formula - 4x98.
• “DIA” (center hole diameter) – 58.6 mm.

2. Characteristics for the “Norma” version

• diameter reaches 14 inches;
• landing width – 5.5 inches;
• offset - 35 or 38 mm (depending on the year: if 2011, then 35, and for 2012 the value is 38 mm);
• bolt pattern geometry – 4x98;
• "DIA" - 58.6 mm.

3. The manufacturer equipped the “luxury” package with the following discs:

• 15" diameter;
• landing width is 6 inches;
• offset parameter – 35 mm;
• similar bolt pattern - 4x98;
• "DIA" - 58.6 mm.

Looking at these parameters, we can summarize that, regardless of the version of the car’s equipment, only the bolt pattern and the diameter of the hole for fitting the wheel to the hub remain unchanged. The remaining criteria have an individual shade.

If there is an irresistible desire to install wheels on 15, then this can be done on any version of the Lada Grant in terms of configuration and without the presence of discomfort. The primary criterion will be knowledge of specific parameters when selecting wheels.

If difficulties arise with the choice, an effective measure would be to seek advice from specialists. This will allow you to accurately purchase the required factory wheels.

The database of a store with a decent reputation contains information about the compliance of disks, or rather their parameters, with the design aspects of specific brands, models and modifications of cars. The seller will need to find out the year of production of the car, after which he will offer suitable product options.

Review of winter tires on LADA Granta

• Nokian Hakapellitta 9 are Russian-made tires. Drivers note wear resistance, good car handling in winter and high-quality grip on the road surface. Disadvantages include high noise levels when driving and lack of smoothness. Cost – from 5400 rub.
• Toyo Observer Ice Freezer is a tire made in Malaysia. They are distinguished by stability, controllability on ice and long braking distance on asphalt. Cost – from 3200 rub.
• Continental Ice Contact are made in Korea. They are characterized by a high level of longitudinal and lateral grip and low fuel consumption. The downside is reduced driving comfort. Cost – from 4400 rub.
• Hankook Winter Pike, country of origin – Russia. The positive side of tires of this brand is the good handling of the car on icy and snowy roads. The minus is the length of the braking distance. Cost – from 3200 rub.
• GoodYear Ultra Grip tires are made in Germany. They are distinguished by high maneuverability on snow-covered roads and uncertainty of movement on asphalt surfaces. Cost – from 3500 rub.

How to properly change a wheel on a car

Removing the wheel is mainly necessary when it is necessary to repair the wheel, when repairing and servicing some vehicle components that are difficult to access by the wheel, in case of damage to the wheel in a road situation, or during seasonal tire replacement.

Did you hit a curb? Got a punctured tire? If a situation arises that requires removal of the wheel and tire, contact the service center, they will assist you in this situation. In this case, you don’t have to waste time and get your hands dirty; we will do everything for you quickly and efficiently.

If you decide to do the work yourself, then for removal and installation you will need a tool, which will be difficult to do without:

1. A jack is a tool designed to lift a car in order to remove a wheel installation. Many cars are equipped with a standard jack.
2. Balloon wrench. Needed for unscrewing wheel bolts and nuts. It looks like a socket wrench, on one side of which there is a lever, and on the other a head that fits the size of the disk nut.