Nissan Tiida how to change low beam light bulb
The first generation Nissan Tiida, produced from 2004 to 2014, had h5 12v/60/55w lamps installed in the low beam. The next generation of the model is equipped with lensed optics and other low-beam lamps. The replacement process is not complicated, even a novice car enthusiast can handle it; follow our instructions and you will not have any problems when replacing lamps.
Which lamp to choose
So, we have already found out above that the h5 lamp is installed in the low/high beam. For replacement, you can choose ordinary standard lamps, with increased brightness or extended service life, which are installed from the factory.
- PHILIPS h5-12-60/55 +30% Vision P-12342PR from 140 RUR Germany
- OSRAM h5-12-60/55 64193 from 140 RUR Germany
- NARVA h5-12-60/55 48881C1 from 100 RUR Germany
- BOSCH h5-12-60/55 Pure Light 1987302041 from 130 RUR Germany
- KOITO h5-12-60/55 W 0456E from 220 RUR Japan
- General Electric h5-12-60/55 50440U from 120 RUR Hungary
- AYWIparts h5-12-60/55 AW1910002 from 90 RUR Korea
- MTF h5-12-60/55 +30% Standard Long Life x4 HS1204 from 150 RUR Korea
These are standard bulbs that can be purchased at any automotive store. Lamps of standard power and the same luminous flux. If you need brighter lamps, then you should pay attention to lamps with increased brightness +100 +150% of light at the same power.
- OSRAM h5-12-60/55 +130% NIGHT BREAKER LASER set from 1300 RUR Germany
- PHILIPS h5-12-60/55 +130% X-TREME VISION 3700K set 12342XV+S2 from 1000 RUR Germany
- DiaLUCH h5-12- 60/55 +90% Megalight Ultra PRIME set 12604 PRMU from 600 RUR Korea
- AVS h5-12-60/55 +110% 3700K Sirius Night Way set A78949S from 500 RUR China
- BOSCH h5-12-60/55 +90% 1987301074 set from 900 RUR Germany
The above lamps have excellent light characteristics compared to standard lamps, however, at high brightness, these lamps have a shorter service life due to the design of the lamp.
Instructions for replacing lamps
So, to remove the lamp from the base, first remove the plastic block from the lamp and remove the rubber boot.
Now carefully squeeze out the lamp fastenings, lower them down and take out the old lamp.
When installing a new lamp, you must not touch its bulb, otherwise the lamp will not last long.
Having installed a new lamp, first we put the rubber boot on, and then the block on the lamp.
We check the result, if after replacing the lamp it does not light up, the fuse on this headlight may have blown. Nissan Tiida has its own fuse for each headlight.
Low beam fuse Nissan Tiida
The fuses responsible for the low/high beam are located in the mounting block located under the hood. Each headlight has its own fuse. On the diagram these are numbers 10 and 12. The type of fuse used is flag fuse, power 15 A.
These instructions were written specifically for the site https://1remontauto.ru.
Nissan lamps
Owners of Nissan cars, like other car enthusiasts, are periodically forced to select lighting lamps for their cars. In addition to original light sources, there are a large number of other expensive or cheap, but no less high-quality light bulbs on the market. Lamps for Nissan, both for headlights and interior, are installed depending on the specific model.
They can be produced by a variety of well-known manufacturers, often PHILIPS or OSRAM; the original number of the same lamp in the catalog will depend on this. You may also come across a car on a conveyor belt whose headlights are equipped with KOITO, Clearlight, Omegalight or other bulbs.
Let's consider this question using the examples of three popular cars in our country - Qashqai, Almera, Tiida.
Lamps installed in Nissan
Despite all the variety of configurations and types of headlights (with a reflector or lens), these cars can have such lamps.
Purpose of the lamp | Lamp type | Power | Original numbers | ||
Qashqai | Almera | Tiida | |||
Low beam and High beam (halogen) | H7/H4 | 55/60 W | 26295-BR00A | — | 26294-89911 |
High/low beam (xenon) | D2S | 35 W | 26297-AU310 | — | 26297-89912 |
Separately high beam | HB3 | 60 W | — | 26296-89912 | — |
Separately low beam | H11 | 55 W | — | 26296-89946 | — |
Dimensions | W5W (Fish) | 5 W | 26261-BM400 | 26261-5F005 | 26261-89968 |
Fog lights | H8 or H11 depending on configuration | 35 W or 55 W | 26296-89946 | 26296-89941;B6296-4A001 | 26296-89941 |
Direction indicators | PY21W | 21 W | 26717-BH00A | 26717-5F008 | 26717-BH00A |
Side direction indicators | WY5W | 5 W | 26261-BM400 | 26261-89968 | 26261-89968 |
Brake light/side light | P21/5W | 21/5 W | 26717-2F000 | 26717-2F000 | 26717-2F000 |
Combined stop/gauge | W21/5W | 21/5 W | 26717-4AA0B | 26717-4AA0B | 26717-4AA0B |
Now a few words about the lamps installed in the interior of the mentioned cars.
Purpose of the lamp | Lamp type | Original numbers | ||
Qashqai | Almera | Tiida | ||
Interior lighting | HB | 26282-AX600; 26447-EN000 | 26282-AX600 | 26282-EL00A |
Analogs of used original headlight lamps
Lamps of type h7 have a socket marked PX26d. The design stipulates that its maximum power is 55 W, and this is the value that most sold samples are designed for. The lamp can be used for both low and high beam.
Popular manufacturers | Article number |
Bosch | 1987301012 |
Osram | 64210 |
General Electric | 17123 |
Philips | 12972 PR |
General Motors | 94536018 |
Valeo | 032009 |
In h8 the base type is H27W/1. Such bulbs are usually used in fog lights of various cars, including Nissan Qashqai, Almera and Tiida, as well as other models. It is distinguished by a yellowish glow, small geometric dimensions and low power consumption.
Popular manufacturers | Article number |
Osram | 880 |
Philips | 12059C1 |
General Motors | 94535555 |
Single-filament halogen lamp with H11 socket can be used in both regular and fog lamps. The cartridge designation is PGJ19-2. Due to design features, its maximum electrical power is limited to 55 W.
Popular manufacturers | Article number |
MTF Light PALLADIUM | 31262031 |
PHILIPS | H11 |
AUTO-GUR | AG12362LSC1 |
AUTO-GUR | AGH11XV |
XENITE | 1007011 |
The H4 type lamp is a double-filament halogen lamp. The cartridge designation is P43t. Can be used for both low and high beam. Power consumption is limited to 60/55 W. It is produced by many well-known global manufacturers.
Manufacturer | Catalog number |
Bosch | 1987302042 |
Osram | 64193SUP |
General Electric | 50440U |
Philips | 12342 PRC1 |
Valeo | 032007 |
Headlight bulb HB3. Cartridge type - P20d. It is a classic single-filament halogen lamp. In the American standard it is designated 9005. The lamp power is 60 W.
Popular manufacturers | Article number |
PHILIPS | HB3 |
BOSCH | 1987302154 |
AUTO GUR | AG9005LSC1 |
Lamp type D2S. This is a xenon gas discharge lamp designed to operate at a voltage of 85 V. Its power is 35 W. Cartridge type - P32d-2. The color temperature is 5500 K. Can be used as a low and high beam lamp.
Manufacturer | Order number |
WAGNER | D2S |
Philips | 85122XV2C1 |
Osram | 66240CLC |
Lamp WY5W. It is a baseless single-filament automobile lamp used as a signal lamp (usually in turn signals with a transparent lens or to illuminate license plates). Lamp power - 5 W. Cartridge designation: W2.1×9.5d.
Popular manufacturers | Article number |
Bosch | 1987302241 |
Osram | 2827 |
General Electric | 90199 |
Philips | 12396 CP |
Valeo | 032213 |
Baseless white light bulb W5W (FISH). Used in the front dimensions of many Nissan cars (in particular Almera, Micra, Note, Primera and Tino). An LED bulb that is analogue with a filament is designated as T10.
Manufacturer | Order number |
Philips | 12961NBVB2 |
Hella | 8GP003594121 |
Osram | 2825HCBI-02B |
Auto lamp W21/5W. It is a baseless two-filament automotive warning lamp. The cartridge designation is W3x16q. As a rule, it is used in a combined brake light with a clearance. In the rear brake lights (21 W filament) and side lights (5 W filament). Instead, LED T20 is often installed.
Popular manufacturers | Article number |
Bosch | 1987302252 |
Osram | 7515 |
General Electric | 7443 |
Philips | 12066 CP |
Narva | 17919 |
Car lamp P21/5W with BAY15d socket. This is a classic double-filament automotive lamp, widely used mainly in car taillights. A 21 W filament is used for the brake lights, and a 5 W filament is used for the side lights.
Manufacturer | Order number |
Philips | 12499VPB2 |
BOSCH | 1 987 301 016 |
General Electric | 1077 |
Koito | P4524 |
Lamp PY21W, socket designation - BAU15S. This is a classic single-filament lamp, widely used in car turn signals and similar places. It differs from the regular P21W lamp in the amber color of the bulb.
Manufacturer | Order number |
Philips | 12496NAB2 |
BOSCH | 1987302213 |
AYWIPARTS | AW1920011Y |
Source: https://blog.partreview.ru/article/lampy-nissan/
Replacing a low beam bulb on a Nissan Tiida – Car Lover's Blog
Low beam lamp for Nissan X Trail T31, Tiida, Note, Beetle, Pathfinder and Primera The serviceability of the lighting system directly affects the safety of movement at night and in conditions of insufficient visibility, therefore all elements must be in working order. In this review we will tell you how to change lamps in some Nissan models; the work is almost identical in everything, and they have their own characteristics depending on the modification. How to replace a low beam lamp, how to change a lamp, change it. In an Opel Astra. Uh, low beam or dimensions described how to change a light bulb, like a Nissan? Me: yes! He. In any case, this operation can be done by any car owner, and it does not require special tools or equipment. In the photo: working light is a guarantee of safety and comfortable movement
Nissan Tiida C11 – Tuning and accessories for NISSAN TIida
Showing 17–32 of 107 results
Roof rack Turtle (AIR1)
vendor code
: AIR1
Manufacturer
: CanotomotivMore details 7000 rub.Roof rack Turtle (AIR2)
vendor code
: AIR2
Manufacturer
: CanotomotivMore details 7000 rub.Roof rack Turtle (AIR2) Black
vendor code
: AIR2 Black
Manufacturer
: CanotomotivMore details 7000 rub.Roof rack WINGCARRIER V1 (universal)
vendor code
: WCA.100CM.G
Manufacturer
: ErkulMore details 5000 rub.Bolts for fastening the license plate (secret number)
vendor code
: HJ-PL001
Manufacturer
: TorinoRead moreNissan Logo Keychain
vendor code
: AA0739
Manufacturer
: TorinoMore detailsNissan Logo Keychain
vendor code
: AA-0809
Manufacturer
: ChinaMore detailsNissan Logo Keychain
vendor code
: AB-1234
Manufacturer
: ChinaMore detailsUniversal keychain
vendor code
: RS-03
Manufacturer
: ChinaMore detailsUniversal mud flaps Elegant
vendor code
: HJ-004-2PCS
Manufacturer
: TorinoRead moreHalogen lamp MTF Titanium 2 pcs
vendor code
: N/A
Manufacturer
: MTFMore details 1200 rub.Decorative elements of the radiator grille Nissan Tiida Ø10
vendor code
: NTID.91.2953
Manufacturer
: Soyuz-96More details 6500 rub.Decorative element of the air intake Nissan Tiida Ø10
vendor code
: NTID.96.2954
Manufacturer
: Soyuz-96More detailsWindow deflectors Nissan Tiida 4D
vendor code
: D57345
Manufacturer
: V-StarMore details 2500 rub.Window deflectors Nissan Tiida 5D
vendor code
: D57288
Manufacturer
: V-StarMore details 2500 rub.HAMANN daytime running lights (black)
More details 18,000 rub.
Replacement of rear dimensions
- Open the plugs (as in the photo)
- Unscrew the fasteners (2 nuts) + Remove the wire block
- We take out the headlight (pull it horizontally towards us, from the street side)
- We take out the worn light bulb and put a new one in its place. If you count from left to right, then the first light bulb is our size (for the left headlight).
- We reassemble the headlight in the reverse order
Experts recommend changing the dimensions of the Nissan Tiida hatchback immediately and on the opposite side.
By the way, here is a video review of how to change the rear dimensions yourself:
NISSAN TIIDA, 2007 - 2015
OEM: | FBM22-EM30J |
CODE: | DS04232BA, PDS04232BA |
Manufacturer: | TYG (Taiwan) |
Description: | black |
OEM: | 96302-EE90A |
CODE: | 51000063820, VDSM1011EL |
Manufacturer: | T.Y.C. |
Description: | (05-12), with electric control, with primer, convex. Left side (driver). |
not in stock
OEM: | 96301-EE90A |
CODE: | 51000063810, VDSM1011ER |
Manufacturer: | T.Y.C. |
Description: | (05-12), with electric control, with primer, convex. Right side (passenger). |
OEM: | 26555-ED008 |
CODE: | 11-B032-A1-2B, ZDS1932L |
Manufacturer: | T.Y.C. |
Description: | 5D, H/B, without fog light, (E). Left side (driver). |
not in stock
OEM: | 26550-ED008 |
CODE: | 11-B031-A1-2B, ZDS1932R |
Manufacturer: | T.Y.C. |
Description: | 5D, H/B, without fog light, (E). Right side (passenger). |
not in stock
OEM: | 75892-EL000 |
CODE: | DS33038A, PDS60010A |
Manufacturer: | TYG (Taiwan) |
Description: | Deliveries stopped |
not in stock
OEM: | F5100-EL030 |
CODE: | DS20106A, PDS20106A |
Manufacturer: | API |
Description: | Hood for NISSAN VERSA, 2007 - 2013. OEM: F5100-EL030. |
OEM: | 65100-EF8JJ |
CODE: | GD99B46, PDS20107A |
Manufacturer: | GORDON |
Description: | Hood for NISSAN TIIDA, 2007 - 2015. OEM: 65100-EF8JJ. Note: MIDDLE EAST TYPE. . |
not in stock
OEM: | 62225-ED000 |
CODE: | DS43318AL, PDS43318AL |
Manufacturer: | TYG (Taiwan) |
Description: | Tiida 05- / Versa 07-. Left side (driver). |
not in stock
OEM: | 62224-ED000 |
CODE: | DS43318AR, PDS43318AR |
Manufacturer: | TYG (Taiwan) |
Description: | Tiida 05- / Versa 07-. Right side (passenger). |
not in stock
OEM: | FCA01-EL0AA |
CODE: | DS10152BL, PDS10152BL |
Manufacturer: | API |
Description: | no answer to repeat. Left side (driver). |
not in stock
OEM: | FCA00-EL0AA |
CODE: | DS10152BR, PDS10152BR |
Manufacturer: | API |
Description: | no answer to repeat. Right side (passenger). |
not in stock
OEM: | 63101-ED030 |
CODE: | DS10152AL, PDS10152AL |
Manufacturer: | GORDON |
Description: | with otv. to repeat. Left side (driver). |
OEM: | 63100-ED030 |
CODE: | DS10152AR, PDS10152AR |
Manufacturer: | GORDON |
Description: | with otv. to repeat. Right side (passenger). |
OEM: | |
CODE: | BK061, BK061 |
Manufacturer: | REVITAS |
Description: | Towing hook for PEUGEOT 4007, 2007 - 2014. OEM: . |
OEM: | F2530-EL0MA |
CODE: | DS30069AW, PDS30069AW |
Manufacturer: | API |
Description: | Lower frame for NISSAN VERSA, 2007 - 2013. OEM: F2530-EL0MA. |
OEM: | 62511-EL030 |
CODE: | DS30069AU, PDS30069AU |
Manufacturer: | API |
Description: | upper |
OEM: | 62550-EL030 |
CODE: | DS30069AC, PDS30069AC |
Manufacturer: | API |
Description: | center. |
OEM: | 62513-EL030 |
CODE: | DS30069AL, PDS30069AL |
Manufacturer: | API |
Description: | side. Left side (driver). |
not in stock
OEM: | 62512-EL030 |
CODE: | DS30069AR, PDS30069AR |
Manufacturer: | API |
Description: | side. Right side (passenger). |
not in stock
OEM: | 26060-EE900 |
CODE: | 20-A974-05-6B, ZDS1116L |
Manufacturer: | T.Y.C. |
Description: | p/corrector, without motor. Left side (driver). |
not in stock
OEM: | 26010-EE900 |
CODE: |
Adjustment features
Adjusting Nissan Note headlights is done in the same way as on other cars. To do this, the machine should be placed on a flat horizontal platform in front of a vertical wall at a distance of 5 meters. Markings are applied to the wall or stand according to which the headlights are adjusted.
Adjusting the light according to the markings
Before starting the setup, you need to check the tire pressure, place a load weighing about 75 kg on the driver’s seat, or have an assistant sit on it. The weight of the vehicle should be approximately the same as during daily use. Adjustment is carried out one by one for each headlight. A properly adjusted light illuminates the entire road and does not blind oncoming drivers.
Car front optics
Optics on Nissan cars: its secrets and features
You have to change the optics on your car if they are out of order, or if you are not satisfied with the standard lighting.
Headlights on Nissan models are one of the elements of the car's exterior. You can improve the appearance by purchasing tuned headlights or adding eyelashes to the headlights. To improve the quality of daylight, DRLs with xenon are installed (video author: Denis Skibin). For high-quality lighting at night, halogen lamps are installed. They are most often used as low and high beams.
For DRL lights, LED lights are used, in this case the daylight is brighter. Drivers are replacing brake light bulbs with LEDs.
The LED brake light can be made dynamic, for example, in the form of a running light. Xenon and halogen bulbs are installed in the fog lamp.
Replacement instructions
Front lights illuminate the road and allow the driver to see road signs and markings, ensuring safety. In many ways, the quality of lighting depends on the condition of the lamps installed in the optics. During operation, light bulbs can fail for various reasons. In this case, they need to be replaced with working ones.
The procedure for replacing light bulbs on a Nissan Note is simple and can be done by any car enthusiast.
You can change lighting sources on a Nissan Note without removing the headlights. They are changed from the engine compartment.
Left light 10 Trail
The lamps on the Trail T31 are changed in the same way as on the Nissan Note.
The following actions are performed:
- Having opened the hood, you must first disconnect the negative terminal from the battery.
- Next you need to disconnect the connector from the base.
- The next step is to remove the rubber cover.
- At the next stage, press the spring lock and turn it. Thus, we weaken the fixation of the light bulb.
- Next, remove the lamp from the headlight.
- We install a new light source and perform all the steps in reverse order.
After replacement, if necessary, you need to adjust the headlights.
Halogen lamp for PTF
Fog lights are changed according to the following scheme:
- First you need to unscrew the self-tapping screw securing the fender liner, which is located under the lamp.
- After removing the fender liner from the clip, you need to move it to the side.
- Having found the base of the light bulb, rotate it counterclockwise and remove it.
- Next, install a new light bulb.
- We perform assembly in reverse order.
Replacing the brake light bulb is also easy.
Adjustment features
Adjusting Nissan Note headlights is done in the same way as on other cars. To do this, the machine should be placed on a flat horizontal platform in front of a vertical wall at a distance of 5 meters. Markings are applied to the wall or stand according to which the headlights are adjusted.
Adjusting the light according to the markings
Before starting the setup, you need to check the tire pressure, place a load weighing about 75 kg on the driver’s seat, or have an assistant sit on it.
The weight of the vehicle should be approximately the same as during daily use. Adjustment is carried out one by one for each headlight.
A properly adjusted light illuminates the entire road and does not blind oncoming drivers.
Car front optics
Conclusion
To ensure safety, it is necessary to ensure that the optics are in good working order. If light bulbs burn out, they should be changed immediately. The quality of lighting is affected by the condition of the lanterns. Glass must be transparent, without chips or damage. If necessary, the lights should be repaired or replaced.
Any Nissan Note, 10 Trail T31 and other models require regular maintenance. The design of the optics is quite simple, so even a novice car enthusiast can replace lamps, install DRLs and adjust headlights, if necessary.
Loading …
Video “Front light Nissan X Trail T31”
This video demonstrates the updated light of the front lights: LED running lights of the Nissan X Trail T31 and more (the author of the video is Megafara RU).
Source: https://avtozam.com/nissan/osobennosti-i-zamena-optiki/
General recommendations for carrying out work
Regardless of which car the work is carried out on, there is a certain list of operations that always remain the same, and we will consider them:
Removing the terminal from the battery | Many people believe that this is not necessary, they say, the lights are turned off anyway and there is no danger. In fact, this recommendation is given by manufacturers due to the fact that problems may still arise, and if the battery is disconnected, then no short circuits or electric shock will occur |
Lamp selection | Under no circumstances purchase lighting elements with higher power than those provided by the manufacturer, as this will overload the machine’s wiring and other system elements. In addition, when carrying out work with your own hands, it is important to purchase high-quality products, although their price is higher, but the characteristics are much better |
Comfortable working conditions | It is important that the car is located on a level surface in a well-lit place, this can be a street if the weather is good. In addition, we recommend working with gloves, as the design has many protruding elements that can easily scratch your hands. |
Accuracy | This applies to the entire process - do not pull the wires so as not to damage the contacts. It is important to remove the connection block correctly so as not to damage it. This can be said about every stage of work - never rush and do everything as it should be |
Important! Never touch the glass surface of the lamp with your fingers, as there will be particles of fat on it, which, under the influence of high temperatures, burn, forming dark spots on the surface, which will significantly reduce the service life of the unit.
When replacing, always hold the base of the product
Nissan Tiida Penka › Logbook › Replacing lamps
Today turned out to be a clear day and relatively not cold, so I decided to do something that I haven’t gotten around to doing for a long time - change the burnt-out lamps in the brake lights of the main headlights and reinstall the main light lamps I bought the other day. The stops burned out almost simultaneously back in February, and all this time bad thoughts constantly came to mind before intersections - how could someone behind you not notice the only working backup stop on top? I bought the lamps almost immediately, but somehow the installation didn’t work out: the weather was nasty - cloudy and cold. I tried to remove the headlight, and either because of the cold, or because of the crookedness of my hands, I just couldn’t pull off the clips holding the headlights on the body, and with all my might I broke off the edge of the top when, in an attempt to pull it off, I started pulling on it too. In general, then I gave up on this matter and decided to wait for warmer days, because I absolutely did not want to pay for the service.
I decided to start before the sun had time to leave the yard, with low and high beam lamps. Since last time, when replacing the lamps, I realized that this is still the Kama Sutra and there’s no way without good lighting. Last time, by the way, I didn’t understand blindly how to get to the lamps, I decided not to take risks and trust the servicemen and they charged me almost 300 rubles for it. Today, judging sensibly that what two years ago cost 300 will now probably cost 500 rubles, or even 600 (as far as I know, replacing a light bulb at a dealer takes 0.3 hours - how much does their standard hour cost now?) I decided to press the topic further and prove to myself that my hands are still “on a compass.”